Questions of HDCP with Hyper V and AMD video drivers

Similar Questions

• Screen HP 2000 - BF69WM flicker when you use AMD video drivers

  Hello

  When HP AMD video drivers (tried all available versions) are installed, I get screen flashes when the laptop appears on the start screen.  However, when I installed the video driver from Microsoft, the screen is normal.  Please note that a return to settings recovery factory (Windows 8) is already at this point.  Your contribution is greatly appreciated.  Thank you.

  Thanks for the reply. I'm afraid that there is a problem material, based on what occurred during the recovery. I am happy that you have found a workaround for the moment!

  Please let me know if you have any other questions. If you enjoy the information provided, please mark one of my posts with an acceptable Solution. It will help me, but also to help someone in the future has the problem!

  Thank you and have a great day!

  Mario

• HP 15-af131dx: computer HP laptop does not start after update AMD video drivers

  Hello, my laptop HP 15-af131dx would not start after I have updated to the latest video drivers from AMD. After update, my phone was really slow, so I decided to restart it. When I tried to start up, most of the time, she would get to the windows logo with the symbol of loading under it and crashed. Sometimes arise windows recovery, but using it would only make it appear an error message. After a few tries, I was able to boot into windows safe mode and restore my video drivers. This corrects the problem, but I would like to know why this is happening and if the update of my video drivers by importing.

  . Hi @HPlaptop5,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with video drivers. I'll be happy to help you.

  You can also find your drivers to support.hp.com.

  The latest HP driver released was Version 15.201.1101.0 Rev.A release: January 29, 2016.

  I do not update my driver unless I have a video problem.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Question in cooperation with af:iterator and by program (add and delete records using the list)

  In our application, we try to add and delete records within a one: iterator lie to the backing bean list table.

  According to the feature remove should not fire any validation form so we are settign Remove button including the immediate property. And add can throw validation before adding a new record.

  Here the problem comes with button Delete with activated immeidate.  The deletions list action recording is removed from the collection list at the beacking bean, but after that the interface iterator partial page refresh user displays with bad Recordset. Some how instead of getting the last recordings of server of the user interface displays the previous local values for input components.

  For example: if I have 5 files in the list and delete record 2nd of collection. Backing bean (server side) the 2nd record is perfectly removal of list collection.

  On the user interface, the iterator 4 records are displayed as the size of the list is 4, but instead of 2nd record the last record is not rendered. According to my understanding, as deleting comme la suppression touche key is set immediately then the some how these recordings (genereted the Id of component runtime inside the i1: 0:it1 etc...) Apply request vandekerckhove is not updated gettign, Hene showing the old local values inplace of these components of entry and this behavior is only for input components.

  Can you suggest me a solution more come to the question above. Delete with immediate should unregister correspondent and only the record deleted if pannals UI.

  JSFF code

  <af:panelGroupLayout id="pgl1" binding="#{viewScope.formBB.mainPGL}">
          <af:iterator id="i1" value="#{viewScope.formBB.allEmployees}"
                       var="emp" rows="0" varStatus="vs"
                       binding="#{viewScope.formBB.iteratorBinding}">
            <af:panelFormLayout id="pfl1" maxColumns="4" rows="1" labelAlignment="top">
              <!--<af:outputText value="#{vs.index}" id="ot1"/>-->
              <af:inputText label="First Name" id="it1" value="#{emp.firstName}"
                            autoSubmit="true" required="true"/>
              <af:inputText label="Last Name" id="inputText1"
                            value="#{emp.lastName}" autoSubmit="true"
                            required="true"/>
              <af:commandImageLink text="Delete" id="cil1"
                                   immediate="true"
                                   actionListener="#{viewScope.formBB.deleteEmployee}">
                <f:attribute name="index" value="#{vs.index}"/>
              </af:commandImageLink>
            </af:panelFormLayout>
          </af:iterator>
          <af:commandButton text="Add New Employee" id="cb1"
                            actionListener="#{viewScope.formBB.addNewEmployee}"/>
          <af:spacer width="10" height="10" id="s1"/>
  </af:panelGroupLayout>
  

  Delete the Action listener for the bean

  private List <Employee> allEmployees;
  public List getAllEmployees() {
          return allEmployees;
      }
      
  public void deleteEmployee(ActionEvent actionEvent) {
          int index = (Integer) actionEvent.getComponent().getAttributes().get("index");
          if(allEmployees != null && allEmployees.get(index) != null) {
              System.out.println("Emploeye Name:" + allEmployees.get(index).getFirstName());
              allEmployees.remove(index);
          }
          //AdfFacesContext.getCurrentInstance().addPartialTarget(mainPGL);
          AdfFacesContext.getCurrentInstance().addPartialTarget(iteratorBinding);
              
      }
  public void addNewEmployee(ActionEvent actionEvent) {       
          Employee addE = new Employee();
          if(allEmployees != null) {
              allEmployees.add(addE);
          }
          else {
              allEmployees = new ArrayList <Employee>();
              allEmployees.add(addE);
          }
          AdfFacesContext.getCurrentInstance().addPartialTarget(mainPGL);     
      }
  

  Jdev version - Build JDEVADF_11.1.1.7.0_GENERIC_130226.1400.6493

  POC Application - https://drive.google.com/file/d/0BysBrGAsXoo0Qjh3VGkzZkRGck0/view?usp=downalod

  Help, please.

  You probably need to reset submitted values.

  For this, you can use this util class: ResetUtils (reference Java APIs for Oracle ADF Faces)

  For example: ResetUtils.reset (iteratorBinding);

  BTW, you should never bind components to bean managed with a scope greater than the scope of the request.

  Dario

• PP CC blocks - perhaps in connection with Mercury Playback and AMD / HD6950

  I had a lot of instability with my set-up.

  i73770K - 32 GB of RAM - HD6950 2 GB - Windows 8

  Computer has been and is very stable in all but the first Pro CC.

  I have clean re-installed Windows 8 and Adobe CC.

  I'm going to regularize with beta drivers 13.4 and 13.6.

  I think it's directly related to mercury reading because when I disable GPU acceleration and will software only, it does not crushed, but even on this pretty good system, it will not play well and it is a bit slow hogging all my CPU unless I use a lot of deception low display resolution.

  I have projects that threat, so I need to get to where I can change something soon.

  I suppose that here are my options:

  $1 $$ buy a more recent video as a HD7950 card. Maybe a new card would help? Or maybe the AMD drivers are a few sketches or support open CL is simply too new?

  2. $$$ buy a Nvidia card. Is there evidence that the Nvidia support is more stable and more mature?

  3. change on my MacBook Pro with HD6750M. It will simply not be as smooth and quick that my office with portable fans will turn off and all that. I prefer to use my beasty office.

  4. $$$ bail and just go FCPX on my Macbook Pro. It seems ridiculous because I am paid upwards to the CC workflow.

  I'd go with 2.  Reported problems with the latest nVidia 320 driver, but using an older driver 314 it works petty darn good.

• EliteBook 745 G2: Troubleshooting the AMD video driver

  Hi all!

  I have reported problems difficult to solve by myself, I found. I have a hp elitebook 745 G2 for my personal use. I've updated to windows 10 a week ago, but since I met many BSOD and PC freezes, so I did a clean Windows 10 operating system installation, using the built-in function to recovery my apps to keep my data intact and unistalling all installed system. After that, I discovered that windows has install AMD video drivers automatically. On windows, 8.1 I always used to run amd autodetect utility to update my video drivers and I have never ecountered the real problems. But with 10 windows, it seems that two compatible generic video drivers windows-10 and video drivers custom microsoft servers work properly, as I've always frozen and BSODed my PC after istalling them.

  Another detail: it seemed to me that the biggest problem comes from a streaming video, as my PC has always blocked himself after a few seconds of video streaming on you tube. Surely, this happened with the generic video drivers from AMD (I clean istalled not not using auto-detection utility).

  However, I was able to run my computer after installing video drivers for HP (and after the last clean istall of windows 10, I had to repeat several times to clarify this problem...). I noticed that Hp AMD video drivers are customized so that some functions do not work, such as stable video technology and fast flow techology. It is interesting when I tried to install fast flow Soft technology separately and to execute a video streaming on you tube, my PC freezes again. That won't happen if I broadcast without this app on my PC.

  So, I wouldn't change a thing, because I don't want to go into other incidents and other time, but let me ask you a few questions: why the generic video drivers does not work correctly if they worked then in windows 8.1? What I expect in the future of AMD video drivers or I can istall new generic?

  I'll use this post to be updated on future possible BSOD. Here is the .dmp file generated after the quickflow istall techology and streaming video opened with bluescreenview.

  ==================================================
  Dump file: 081815-8843 - 01.dmp
  Crash time: 08/18/2015 10:52:29
  Bug Check String: PAGE_FAULT_IN_NONPAGED_AREA
  Bug check Code: 0 x 00000050
  Parameter 1: fffff6fb'400037 has 8
  Parameter 2: 00000000'00000000
  Parameter 3: 00000000'00000000
  Parameter 4: 00000000'00000006
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 14dd00
  Description of the file:
  Product name:
  Company:
  Version of the file:
  CPU: x 64
  Plant address: ntoskrnl.exe + 14dd00
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\WINDOWS\Minidump\081815-8843-01.dmp
  Number of processors: 4
  Main version: 15
  Minor Version: 10240
  Empty the file size: 131.628
  Dump of file time: 18/08/2015-10:53:01
  ==================================================

  and the process has failed

  ==================================================
  Name of the file: ntoskrnl.exe
  Address of stack: ntoskrnl.exe + 16c98e
  Address: Fffff803'65e0c000
  Address: Fffff803'6665e000
  Size: 0 x 00852000
  Time stamp: 0x55c5a3b2
  Time string: 08/08/2015 08:37:38
  Product name:
  Description of the file:
  Version of the file:
  Company:
  Full path:
  ==================================================

  Ok. I solved by myself. The problem was really fast stream technology app that isn't compatible with windows 10. You can install either the video driver generic AMD or hp. The key is to NOT let the catalyst Installer to install this application on your computer.

  I hope that this could be useful to someone.

  Bye!

• Question of BitLocker with new models E7270 E5470 E5570 Latitude and precision 7710 7510

  Hello

  I got all these new models last week and I have a problem with them...

  Deploying Windows 7 Enterprise 64-bit with SCCM 2012 and bitlocker is configured during the task sequence by a PIN at startup.

  This process works for all models until there... Latitude and Precision of previous generations, but now, with new models, there is a problem with the PIN code. At the end of the sequence of tasks, the drive is encrypted and there is no error BUT the PIN is not recognized and the recovery key is requested.

  This recovery key is correctly stored in AD. TPM and owner is ok. Version of the TPM secure is 1.2...

  I already tried to manually decrypt and encrypt again after you secure the TPM reset, but no way.

  I also tried Windows 10 companies, and the issue is the same.

  Is this a known issue? Someone here already experienced the same thing?

  Hello

  This question is one that is being developed and there are updates of BIOS coming out that will fix it.

  At the moment the latest BIOS for the E7270 will fix the problem (BIOS 1.2.2)

  For the E5470/E5570 of Latitude and Precision 7510/7710 updates of BIOS to fix this will be published soon. I will not give dates at this stage because they can change.

• When you use the question mark, appears like a capital E with accent French and cannot use the quotes.

  Original title: I can't use my question mark (rises like a capital E with accent French and cannot use the quotes)

  I'm having a problem from time to time with my ability to use marks quotaion, brands etc. How can I treat it DEFINITIVELY the question.

  Thank you

  Hi golfnut11,

  1. you are using a laptop?

  2. you remember to make changes to the computer priro to this question?

  Step 1:

  If you use a laptop, check if the FN key is enabled. If so, then try to turn it off and check.

  Step 2:

  You can also try to check the keyboard on the screen and if the problem occurs or not.

  Check out the link:

  Type without using the keyboard (on-screen keyboard)

  http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard

  If you use a Microsoft keyboard, you can also consult the following article:

  Troubleshoot wired keyboards that do not or only the erroneous characters category
  http://support.Microsoft.com/kb/258826

  Hope this information is useful.

• Problem with the store and several questions.

  I tried all the methods listed below:

  Method 1: Make sure that User Account Control (UAC) is enabled.

  Press the Windows key and from the splash screen, type "UAC" and on the right, select settings.
  Select change user account control settings and check here.

  Method 2: Check the date & time zone is correct:

  Follow these steps to change the time.

  a. double-click the current time on the lower right of your screen.

  b. then click Change hour date, then click on the button to change time zone

  c. Select your time zone and the tick to automatically adjust clock for the time being, then press OK

  d. press on apply, then OK.

  Method 3: Run the network troubleshooting and check if you can connect to store.

  Follow the steps to run the network troubleshooter utility:

  a. press the keys Windows + C on your keyboard to show the charms.

  b. type Troubleshooting , and then clicksolving problems under settings.

  c. now, tap network troubleshooting in the optionSearch .

  d. clickutility troubleshooting networkto run the troubleshooter.

  Method 4: If you use a proxy connection, then try to disable the proxy and then check if the problem persists.

  Follow the steps to disable the proxy:

  a. open Internet Explorer

  b. click on the Tools buttonand then click onInternet Options

  c. click on the Connections taband then clickLAN settings

  d. uncheck it Server Proxy use.

  e. click on apply then Ok to save the changes.

  Now, check if you can access store.

  Method 5: Cache reset Store.
  Follow the steps and check out them.
  (a) right click on the start screen
  (b) click on run
  Type c) in WSReset.exe
  (d) press enter
  (e) restart the computer and check.

  Method 6: analysis Run SFC
  (a) right click on the lower left corner of the screen and select 'Admin command prompt.
  (b) type following command, and then press ENTER: "sfc/scannow".

  Method 7: I suggest that you disable the antivirus installed on the computer.

  Method 8: CDevil Windows Firewall settings

   

  (a) Type in the Panel on the Start Page.

  (b) on the left side, click on Control Panel.

  (c) click on Windows Firewall.

  (d) in the left pane, click "allow an app or feature through Windows Firewall."

  (e) under the features and applications allowed, look for store.

  (f) make sure that you have a click in private or Public.

  (g) then see if you can open the Windows store.

  Not a SINGLE one of these methods have worked. When I go to my home screen and click on store, he told me 'we could not connect to the Bank. This could have happened due to a server problem or a network connection has expired. Please wait a few minutes and try again. "I did it on my network troubleshooting, all right, I am able to connect to everything, but I've NEVER been able to connect to the store. Not only can I not connect to the store to upgrade to 8.1 Windows, but I can't create restore points. Not only that, but the backlight on my keyboard, no matter which option to choose, is always on when I type, even if I say it stays off. In addition, with Windows 8, I was promised the "quick start" where he takes no time to start, it takes more to start my computer windows 8 as it did my 4 years updated to the windows computer 7. Also, I can't start in Safe Mode or the clean boot. Whenever I try to perform the clean boot by using the options in the window manager and the configuration tasks system, when the computer reboots, everyone who opens are reset to zero and it doesn't work. I can also perform an update of the system. I want to just upgrade to 8.1 windows, but I'm not without the WS and NONE of the methods I have found work. I'm about to say the hell with windows 8 and make a downgrade from the system to an OS that actually works. I had nothing else problems since I bought this computer with windows 8. I don't have time to deal with these questions. It is clear that appropriate testing procedures were followed before the release of Windows 8. Please help, I am very frustrated with all of this.

  I also tried before asking this question. I don't know what happened, or how he did it, but the store has started working when I was on other networks, he didn't always works at home well. I finally download and install windows 8.1 and it fixed the issue together.

• Question about Threads with WHILE and FOR

  Hi all
  
  I have a question on threads with a loop on this topic sentece.
  
  Have the following class:

  class test{
  
  bool foundThing;
  PararellSearch(string [] lista, string s2find){
  while(!foundThing)
  {
  for(int i=0;i<lista.length;i++){
  if(s2find==lista){
  
  foundThing = true;
  
  break;
  
  }
  
  }
  
  }
  
  }
  If I start 10 threads which are using the PararellSearch method to look into lista, each of them inits into a different point, and when some of them found the right word then set foundThing= true. It will stop WHILE and FOR loop in all the threads? 
  If not, how could I do it?
  
  Thanks a lot for your help.
  David.
  
  Edited by: user13553506 on 27-dic-2010 12:15
  
  Edited by: user13553506 on 27-dic-2010 15:54                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
  			 
  When you post the code, you'll want to post a [url http://sscce.org] NBS so that it is clear that what you try to do it. For example:
  1. in the validation of code, put {code} before and after him, then he will be readable.
  2. the convention in Java must start with a capital letter class names, so test, could not test.
  3. the convention in Java is to start with lowercase letters, so parallelSearch, not PWhateverMisspellingYouHaveThere method names.
  4. There is no such thing as bool. It is a Boolean.
  5. it is a String, not string.
  6. never use == to compare the States of objects (such as the content of the strings). Use equals().
  To answer your question: If you create Test 10 objects, then, given that foundThing is an instance variable, there will be 10 variables entirely independent foundThing. An adjustment will not affect the other. In this case, the easiest thing to do would be to foundThing static, so that there is only one copy which is shared by the Test class as a whole. This isn't the only way, or even the best way in all cases, but you have enough other problems to face, so for now to keep things simple.
  Finally, when you have a variable that is shared by multiple threads, you need to either make all the access to this variable synchronized on the same lock (reads and writes), or you need to declare the volatile variable.
  		   

• I just got a computer g60 hp laptop with windows 7 and I can not star wars Knights of the old Republic 2 to work on this, I have tried everything, I saw that you answered someones question similar on this problem, but the answer did not help me

  When I start to play my game, it loads well, and it allows me to start a new game and customize a character and then I press start and it goes through the opening of star wars and then video when that ends, and is about to go to the actual gameplay it stops working, all it say is that the program has stopped working and stops , now as I said this very similar problem replied Web site someoones and you told them update their display driver that I tried and it still doesn't work, my graphics card is a mobile Intel (r) 4 series express chipset family, if this is useful, I also used the xp compatibility mode but that did not work either

  Andrew,
  KotOR II does not have to be compatible with Windows 7.  I suggest contacting the manufacturer of game and see if they have a patch or a patch for this game. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Peut funtion Vmotion and Storage Vmotion with Intel and AMD hosts within the same cluster

  Hi, I can do storage Vmotion OR Vmotion between Intel and AMD hosts within the same group?

  Thank you

  No, it is not possible to vmotion or storage vmotion between CPUs from different manufacturers - I heard rumors that two manufacturers are working on technology that will help in the future-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Activation of Hyper-V and results in a hung system restarting...

  Hello

  I have a HP Envy 23 all-in-one desktop computer with processor Core i7 and 8 GB of RAM. It came with pre-installed Windows 8 (x 64) home.

  I upgraded to Windows 8 Pro (x 64) and activated the Hyper-V feature (Tools for managing Hyper-V and Hyper-V platform). After you add the feature, the system prompted me to restart for the changes to take effect.

  However, after reboot, the system is not come upward (the screen is empty) - I thought I'll leave the system to do anything, he was. The next morning, the screen was always empty even though the system has been powered and was not admissible.

  Turn off the system and turn back brought the system in diagnostic auto mode - auto repair has failed and I had to restore the system to a previous restore point.

  Once connected, I returned the dialog box add features and noticed that the Hyper-V check box is now disabled and all the icons for Hyper-V splash screen disappeared.

  I tried to add the Hyper-V feature again and the result was the same. No idea what could be wrong here?

  Thank you

  AJ

  Note: I turn on the hardware support for virtualization in the BIOS.

  Note 2: Here's the CoreInfo dump:

  Intel Core i7 - 3770 S CPU @ 3.10 GHz
  Intel64 family 6 model 58 Stepping 9 GenuineIntel
  HTT * Hyperthreading enabled
  HYPERVISOR - hypervisor is present
  VMX * virtualization to support supports Intel
  SVM - Supports AMD hardware support for virtualization
  EM64T * support 64-bit mode

  SMX * Supports Intel trusted execution
  SKINIT - Supports AMD SKINIT

  NX * Supports non-performance page protection
  RID * supports the DEP to the supervisor Mode
  SMAP - Media supervisor Mode access prevention
  PAGE1GB - supports large pages of 1 GB
  EAP * supports physical addresses > 32 - bit
  PAT * supports the attribute Page of table
  PSE * supports 4 MB pages
  Pse36 * support > 32 - bit address 4 MB pages
  EMP * ILO global media in the table on page
  SS * bus media snooping for cache operations
  VME * Supports virtual-8086 mode
  RDWRFSGSBASE * takes direct charge of the basic GS/FS access

  FPU * implements i387 floating point instructions
  MMX * Supports MMX instructions
  MMXEXT - MMX AMD Implements extensions
  3DNow - Supports 3DNow! instructions
  3DNOWEXT - Supports 3DNow! extension instructions
  SSE * supports the Streaming SIMD Extensions
  SSE2 * supports Streaming SIMD Extensions 2
  SSE3 * supports Streaming SIMD Extensions 3
  SSSE3 * supports SIMD Extensions additional 3
  SSE4.1 * supports the Streaming SIMD Extensions 4.1
  SSE4.2 * supports the Streaming SIMD Extensions 4.2

  AES * extensions support AES
  AVX * extensions intruction media AVX
  FMA - supports the FMA using State YMM extensions
  MSR * Implements RDMSR/WRMSR instructions
  MTRR * Supports Memory Type Range registers
  XSAVE * Supports XSAVE/XRSTOR instructions
  OSXSAVE * media XSETBV/XGETBV instructions
  RDRAND * instruction supports RDRAND
  RDSEED - supports instructions RDSEED

  CMOV * instruction supports CMOVcc
  CLFSH * instruction CLFLUSH media
  CX8 * media compare and Exchange 8 bytes instructions
  Cx16 * instruction CMPXCHG16B support
  BMI1 - Media bit manipulation extensions 1
  BMI2 - Media bit maniuplation extensions 2
  ADX - instructions of media ADCX/ADOX
  DCA - prefetch, supports mapped in memory devices
  F16C * supports education of half-precision
  FXSR * instructions media FXSAVE/FXSTOR
  FFXSR - support optimized instruction FXSAVE/FSRSTOR
  MONITOR * media MONITOR and MWAIT instructions
  Supports the MOVBE - MOVBE instruction
  ERMSB * improved support of the REP MOVSB/STOSB
  PCLULDQ * instruction supports PCLMULDQ
  POPCNT * instruction POPCNT media
  MS * supports fast system call instructions
  LAHF and SAHF * media LAHF/SAHF instructions in 64-bit mode
  HLE - instructions brackets Hardware Lock elision
  RTM - instructions of holders of limited transactional memory

  OF * breakpoints of e/s including CR4.DE support
  DTES64 * can write the history of branches of 64-bit addresses
  DS * Implements debugging residing in the buffer
  DS - CPL * function Supports Debug Store with CPL
  CCDI * media PCIDs and definable CR4. PCIDE
  INVPCID - supports instructions INVPCID
  PDCM * supports the capabilities of Performance, MSR
  RDTSCP * RDTSCP media statement
  TSC * instruction RDTSC media
  TSC-DEADLINE * APIC Local supports the time of one-shot timer
  TSC-INVARIANT * TSC rotates at constant speed
  Cx16 * supports disabling special priority messages

  EIST * Supports Enhanced Intel Speedstep
  ACPI * Implements MSR for power management
  TM * implements a circuit thermal monitor
  TM2 * control Implements Thermal Monitor 2
  APIC * implements the local APIC accessible by software
  x2apic * Supports x2APIC

  CNXT-ID - Adaptive L1 data cache or BIOS mode

  MCE * media Machine Check, INT18 and CR4. MCE
  MCA * Implements Machine Check Architecture
  PBE * supports the use of FFF #/ PBE # pin

  PSN - serial number of processor Implements 96 bits

  PREFETCHW * statement supports PREFETCHW

  Physical logical processor board:
  * - Physical processor 0 (Hyperthreaded)
  -* - Physical processor 1 (Hyperthreaded)
  -* - Physical processor 2 (Hyperthreaded)
  -* Physical CPU (hyperthreading) 3

  Processor Socket logic board:
  Socket 0

  Logical processor of card NUMA node:
  NUMA node 0

  Logical processor to Cache map:
  * - Cached data 0, level 1, 32 k, Assoc 8, LineSize 64
  * - Instruction cache 0, level 1, 32 k, Assoc 8, LineSize 64
  * - Unified cache 0, level 2, 256 KB, LineSize 64, Assoc 8
  Unified cache 1, level 3, 8Mo, Assoc 16, LineSize 64
  -* - Data Cache 1, level 1, 32 k, Assoc 8, LineSize 64
  -* - Instruction cache 1, level 1, 32 k, Assoc 8, LineSize 64
  -* - Unified cache 2, level 2, 256 KB, LineSize 64, Assoc 8
  -* - Data Cache 2, level 1, 32 k, Assoc 8, LineSize 64
  -* - Instruction cache 2, level 1, 32 k, Assoc 8, LineSize 64
  -* - Unified cache 3, level 2, 256 KB, LineSize 64, Assoc 8
  -* Data in Cache 3, level 1, 32 k, Assoc 8, LineSize 64
  -* Instruction cache 3, level 1, 32 k, Assoc 8, LineSize 64
  -* Unified cache 4, level 2, 256 KB, LineSize 64, Assoc 8

  Logical processor in the group mapping:
  Group 0

  Hello

  The question of "to enable Hyper-V" is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the Technet Forum.

  You can follow this link to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/category/w8itpro

  If you need further assistance, please answer and we will be happy to help you.

• Problem with Hyper-V (Windows 8.1 on HP Probook 450 G0)

  Hello community HP. I recently bought a HP Probook 450 G0 (i5 - 3230M + HD8750), after which I came across a problem and could not find any solution is linked. Here are the steps to reproduce the problem:

  -Install a fresh Pro Windows 8.1 - sweetness

  -Activate the virtualization technology (VTx) via the BIOS - OK

  -Connect to Windows and enable the Hyper-V technology

  -Restart the computer - problem appears.

  Now, my computer takes forever to connect to Windows, with an indicator of spinning and the Windows logo.

  I searched through several similar questions as Gigabyte motherboard problem or and couldn't find something that works. Most possibly related thread is this one.

  I upgraded my BIOS to Version: F.25 (October 24, 2013) 19/08/2013 initial version, but it has led to nothing.

  I need Hyper-V for Windows Phone SDK 8.0 (Windows Phone emulator 8). I hope for a solution as soon as this prevents me from working on this computer.

  Hi PremRanjanDev.

  I've posted my question hereand got some support, I guess this is the right place. It is not completely solve my problem however.

• Compadability issues with fallout 3 and windows 7

  I already tried to go under XP, XP SP2 & 3, Vista, Vista SP1 & 2

  I run it on a laptop with intel core i5 4 x 3GB of ram and geforce gt 520 m, 330 m 1 GB vram
  It worked fine on my old computer laptop amd turion 2 x 4 GB ram ati 3200 m 256 MB vram
  It will work fine on full setting up until I get to where I select my _ while it freezes
  I also tried on minimum settings (set to low temperature preferably windowed 800 x 450) and it always fails at the same place
  My drivers are as up-to-date as possible (nvidia didn't even pilots from the 300 series to the top yet) and I had the cpu running task manager was used only 23% and total of 1.4 GB of ram and video card gets warm barely im wondering if it could be a problem of compadability with the new 300 series?

  I solved the problem I am running a core i5 520 m and geforce gt 330 m on a toshiba satellite p500-st6844 and it came out of the box with hyper threading enabled (the problem) fallout 3 would not run after a lapse of time or a change of scene sertai, I checked the permissions I even ran it under admin account I've updated to the latest version with a supposed windows 7 total compadability fix made sure I had the last ditectx taken care of by my gfx card, I also made, I got the latest nvidia drivers (nvidia still has not all drivers update for the Witch of the 300 series only makes no sense, because they have the same hardware/software as the 200 series) I finally decided to turn off hyperthreading to see if that had nothing to do with it and I seriously doubt that but to my surprise she has a great even better than my office upstairs with a 8800 gtx, so if you have a gambling problem where the game starts well but crashes after a short period of time or during a change of scene and you have active hyperthreading, that might be your problem