questions of id code of access and contact

I just got the new iphone 6 s, and I created my contact id and my password to four digits. But if I do not use the phone for a few minutes, and I let the screen turns off, as soon as I press the home button to turn it on to top - it unlocks immediately on the phone. don't ask the ID of the touch or the access code. It does even the ability to slide to open. as soon as I press the home button it comes he jumps and opens upward from my home screen.

has someone else had that happen to them? can I fix it?

Thank you!! 8)

Advertisement

Mikmik,

ID touch is lightening fast using the 6s. It simply meets your biometric data. Try pressing the button at home with a finger not registered.

Edit: Use the sleep/wake button On / Off, to access the screen without having to activate the unlock screen.

Tags: iPhone

Similar Questions

  • My iPhone 6 s + has been stolen. I got the code to access and iCloud, and I putted in find my iPhone. Here illegally, could unlock iPhone and log in icloud.

    My iPhone 6 s + has been stolen. I got the code to access and iCloud, and I putted in find my iPhone. Here illegally, could unlock iPhone and log in icloud. I only had reference no.. MKV82LL/A, Series n F2 * RWV on the packaging. I wonder how do I get it back?

    < personal information under the direction of the host >

    Hello Miss116,

    I am so sorry your iPhone was stolen, it's a terrible feeling, and I'm here to help you with everything I can.

    1. go to a computer and go to iCloud.com and sign in with your Apple ID and password.

    2. go find iPhone and all devices at the top, click on your iPhone.

    3. click on lost Mode and put in a phone number where you can be reached.

    4. click Next, then enter a message that says something along the lines, "Please find my iPhone, please call this number to return."

    5. click on done

    Best wishes to get your iPhone back safely.

  • question of UCS code main F0283 and dce interface and chassis number?

    Dear Sir

    Introductions:

    a 6120 connect chassis 1 a 2104-1 and frame 2 2104-1 post

    frame 1 have sever 3/4/5/6/7/8 (all breaking is B200 M3, two 2104)

    2 chassis have cut 1/2/3/4/5/7 (cut 1/2/3/4 is B200 M3, two 2104)

    question

    1. main code F0283

    all servers have master code F0283, but everything still break can use.what it? How I did it?

    affected object:sys/chassis-1/blade-6/fabric-A/path-1/vc-722

    Description: a - 722 bright 1/6 ether down, reason: unknown

    frame 1 have sever 3/4/5/6/7/8

    2 chassis have cut 1/2/3/4/5/7

    I stop all and, on the other hand, begins the problem also.

    affected

    I stop all and, on the other hand, begins the problem also.

    2. on frame 1 sever-1 adapter 1 dce interface (interface 1 dce and dce 5)

    one of ony uses?

    3.
    frame 1 have sever 3/4/5/6/7/8
    2 chassis have cut 1/2/3/4/5/7

    but I reboot,.

    2 chassis have sever 3/4/5/6/7/8
    frame 1 have cut 1/2/3/4/5/7

    If the profile is cloudy

    I have shtdown all, and start 1 ok, chassis chassis later 2

    the problem is ok... what this?

    Hello

    #1 F0283 - NHS source pinning failed

    Please make sure that necessary VLANs that are allowed in vNIC is created in FI and and allowed in the uplinks.

    #2 link down errors

    These are normal if the blades are not up and running with an operating system (with appropriate drivers).

    Padma

  • Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

    Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

    You must contact the seller and ask him to remove this iPhone in the devices list. Otherwise, your iPhone will be a useless brick.

    Find my iPhone Activation Lock: a mechanism of extraction of the previous owner - Apple Support

  • I use Windows Live Mail and when I access the contacts screen I get an error message "Not responding" when I try to access anything whatsoever.

    I use Windows Live Mail and when I access the contacts screen I get an error message "Not responding" when I try to access anything whatsoever.

    Hello Brenda,.

    The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

     

    Windows Live Mail

    Windows Live Hotmail

    Windows Live Messenger

    Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

  • I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? I have also a certificate has expired and do NOT know how to get a certificate of update. ?  Please Help, I have NOT b

    I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? What this mean and how can I solve this problem? I have also a certificate has expired and do NOT know how to get a certificate of update. ?  Please Help, I have NOT been able to get help from any of these Issuea. Very frustrated. Please contact me by txt on my iPhone 352-257-9403 if possible. Thank you for your support

    iOS 9.2.1

    certificate is daily horoscope

    wwhat the devil is and why it has expired?

  • I changed my internet provider but I forgot before my important emails and contacts... now my account has been closed... is it possible to access the old account?

    I changed my internet provider but I forgot before my important emails and contacts... now my account has been closed... is it possible to access the old account?

    You need to ask your old internet service provider. They are the ones in control.

  • Cannot access the internet. Have a bunch of yellow exclamation and question marks on Net work adapters and other drivers__

    Cannot set up internet access. Have yellow question mark points of network adapters and other devices (other drivers)

    Hello

    Maybe this can help, http://www.ezlan.net/faq.html#ghost

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Question of blackBerry Smartphones to access folders and files in MSN mail with regard

    I'm new to the BB 8900 (received for father's day).  I had previously used a Palm Treo 780.  My mail is via MSN mail.

    I found it very easy to put in place the BB work with my MSN mail.  I am able to send mail from my BB without problem.  The BB seems to question my MSN email account regularly and I get a new mail to my MSN e-mail account on my BB.

    However, I have a question/problem...

    On my Palm Treo, I could see my MSN INBOX and all other MSN mail folders and their contents.  On the BB all the I seem to be able to access all new e-mail messages I receive.  If it is not important that I can access all files on e-mail MSN on my BB, I would like to be able to access the Inbox on the BB MSN e-mail.

    Is this possible?

    If so, how?

    Thank you

    The files will not appear on the BlackBerry.

    If you access MSN mail through the browser, of course.

  • Hello I would like to create a Muse site with homepage and a member area with access code to access the other page of the site is possible this? Thank you

    Hello I would like to create a Muse site with homepage and a member area with access code to access the other page of the site is possible this? Thank you

    No. you're looking completely in the wrong place. These things requires a dynamic system that is appropriate like Wordpress, Joomla and so on. That or a paid Business Catalyst Pro account.

    Mylenium

  • How to import emails and contacts from windows mail to thunderbird 8

    Hello

    I have Windows 8 and have been using the Windows 8 mail application. However, it is very basic, so I'm willing to switch to Thunderbird. However, I can't find a way to import my mail, folders and contacts to Thunderbird in Windows 8 Mail.

    There seems to be no option to export on Windows 8 Mail. Thunderbird has an import option, but is not able to locate the files of Windows 8 e-mail.

    It doesn't seem to be the answer to this question in the forums. Can anyone help?

    Thank you

    Mark

    App to win 8 Mail is usually associated with ahotmail/live/outlook.com account, so to access it with TB, configure an IMAP account:

    https://support.Mozilla.org/en-us/questions/998184#answer-566746

    To import the contacts, open the web page account, export contacts to a csv file and follow the instructions here:

    https://support.Mozilla.org/en-us/questions/1012084#answer-607601

    http://KB.mozillazine.org/Hotmail

    Automatically from hotmail/outlook represents messages copy sent to the folder "sent", uncheck "Place" a copy in. under the tools/account settings /hotmailaccount/Copies & records.

  • CarPlay and contacts

    I have a brand new Volkswagen Golf. I have an iPhone with the latest iOS, 9.1.2 5s. When I select the phone CarPlay on-screen icon, Siri asks who apply. It works very well. BUT, I can't scroll through the list of contacts, or dial a new number. If I connect via Bluetooth, all contacts are displayed.

    Hi Aileenfromeden,

    I have no experience with CarPlay, but I'd be more that happy to help us hopefully get this figured out together! To start, if I'm right, you don't want to not see your contacts on the screen of your vehicle. The only problem is that your contacts are displayed only when the iPhone connects to the car via bluetooth.

    I may be wrong but my best guess would be that the car can probably not have undertaken 'media' so it cannot store your contacts, which may explain why you are not able to see your contacts unless you connect to car with bluetooth. From what I've seen on the web so, if your car is fitted with a plug iPhone, you can try to connect your device to the card inside this car and CarPlay automatically recognize it. Once CarPlay recognizes the device, see if you can access your contacts. If you can, then the next time you can just leave your iOS device, plugged and I can't use bluetooth.

    I also recommend to check this article from Apple support about CarPlay setting with your iOS device just for other resources if you want or need more information, which can be found here: put in place CarPlay to use with your iPhone - Apple charge.

    I hope I could help you, or at least give you some information. If you have any other questions please do not hesitate to ask.

    Kind regards

    John

  • Cannot access a HID device get code 5 error please let me know how to access a HID device, I need an example of code to access a HID device in windows 7.Thanks.R.M. Kiran

    /*******************************************************
    Simplification of Windows HID

    Alan Ott
    Software signal 11

    22/08/2009

    Copyright 2009, all rights reserved.
     
    The contents of this file can be used by anyone
    for any other reason without conditions and can be
    used as a starting point for your own applications
    that appeal to HIDAPI.
    ********************************************************/

    #include
    #include
    #include
    #include
    #include "hidapi.h".

    The headers needed to sleep.
    #ifdef _WIN32
    #include
    #else
    #include
    #endif

    int main (int argc, char * argv)
    {
    int RES;
    unsigned char buf [256];
    #define MAX_STR 255
    WSTR wchar_t [MAX_STR];
    hid_device * handle;
    int i;

    WIN32 #ifdef
    UNREFERENCED_PARAMETER (ARGC);
    UNREFERENCED_PARAMETER (argv);
    #endif

    struct hid_device_info * devs, * cur_dev;
       
    devs = hid_enumerate (0x0, 0x0);
    printf ("id=%d\tsproduct id = %d\n",devs-> vendor_id provider, devs-> product_id ");
    cur_dev = devs;
    so that {(cur_dev)
    printf ("detecte\n device type: % 04hx %04hx\n path: %s\n Serial_number: %ls", cur_dev-> vendor_id, cur_dev-> cur_dev-> path, product_id, cur_dev-> Serial_number);
    printf ("\n");
    printf ("manufacturer: %ls\n", cur_dev-> manufacturer_string ");
    printf ("product: %ls\n", cur_dev-> product_string ");
    printf ("output: %hx\n", cur_dev-> release_number ");
    printf ("Interface: %d\n", cur_dev-> interface_number);
    printf ("\n");
    cur_dev = cur_dev-> next;
    }
    hid_free_enumeration (devs);

    To implement the command buffer.
    Memset (buf, 0x00, sizeof (BUF));
    buf [0] = 0x01;
    buf [1] = 0x81;

    Open the unit by using the VID, PID,
    and possibly the serial number.
    handle = hid_open (0x4d8, 0x3f, L "12345");
    handle = hid_open (0 x 0461, 0x4d81, NULL);
    If (! handle) {}
    printf ("cannot open device\n");
    Return 1;
    }

    Read the manufacturer string
    WSTR [0] = 0x0000;
    RES = hid_get_manufacturer_string (handle, wstr, MAX_STR);
    If (res<>
    printf ("could not read the manufacturer string\n");
    printf ("string of the manufacturer: %ls\n", wstr ");

    Read the product chain
    WSTR [0] = 0x0000;
    RES = hid_get_product_string (handle, wstr, MAX_STR);
    If (res<>
    printf ("cannot read string\n product");
    printf ("string of product: %ls\n", wstr ");

    Read the serial number string
    WSTR [0] = 0x0000;
    RES = hid_get_serial_number_string (handle, wstr, MAX_STR);
    If (res<>
    printf ("could not read the serial number string\n");
    printf ("string of serial number: (%d) %ls', wstr [0], wstr");
    printf ("\n");

    Read the indexed string 1
    WSTR [0] = 0x0000;
    RES = hid_get_indexed_string (handle, 1, wstr, MAX_STR);
    If (res<>
    printf ("could not read the string indexed 1\n");
    printf ("indexed 1 string: %ls\n", wstr);

    Define the function hid_read() as non-blocking.
    hid_set_nonblocking (handle, 1);
       
    Try reading from the device. It is and must be without
    given here, but enforcement should not block.
    RES = hid_read (handle, buf, 17);

    Send a report on the device
    buf [0] = 0x2;
    buf [1] = 0xa0;
    buf [2] = 0x0a;
    buf [3] = 0x00;
    buf [4] = 0x00;
    RES = hid_send_feature_report (handle, buf, 17);
    If (res< 0)="">
    printf ("cannot send a feature report. \n") ;
    }

    Memset (buf, 0, sizeof (BUF));

    Read a report of the device
    buf [0] = 0x2;
    RES = hid_get_feature_report (handle, buf, sizeof (buf));
    If (res< 0)="">
    printf ("failed to get a feature report. \n") ;
    printf ("%ls", hid_error (handle));
    }
    else {}
    Print the buffer returned.
    printf ("function Report\n");
    for (i = 0; i< res;="">
    printf ("% 02hhx", buf [i]);
    printf ("\n");
    }

    Memset (buf, 0, sizeof (BUF));

    LED toggle (cmd 0x80). The first byte is the report number (0 x 1).
    buf [0] = 0x1;
    buf [1] = 0x80;
    RES = hid_write (handle, buf, 17);
    If (res< 0)="">
    printf ("could not write () \n");
    printf ("error: %ls\n", hid_error (handle));
    }

    Status request (cmd 0x81). The first byte is the report number (0 x 1).
    buf [0] = 0x1;
    buf [1] = 0x81;
    hid_write (handle, buf, 17);
    If (res<>
    printf ("impossible to write() (2) \n" ");

    Read the requested State. hid_read() has been set to be
    non-blocking by the call to hid_set_nonblocking() above.
    This loop shows the non-blocking of hid_read() nature.
    Res = 0;
    While (res == 0) {}
    RES = hid_read (handle, buf, sizeof (buf));
    If (res == 0)
    printf("waiting...\n");
    If (res<>
    printf ("could not read () \n");
    WIN32 #ifdef
    Sleep (500);
    #else
    usleep(500*1000);
    #endif
    }

    printf ("read data: \n");
    Print the buffer returned.
    for (i = 0; i< res;="">
    printf ("% 02hhx", buf [i]);
    printf ("\n");

    hid_close (handle);

    / * Free of static objects of HIDAPI. */
    hid_exit();

    WIN32 #ifdef
    System ("pause");
    #endif

    return 0;
    }

    Hi KIRAN RM,.

    Given that you need example code to access a HID device in windows 7, the question you have posted is better suited for the MSDN Forums. Please post your query in the link next to the support of the MSDN forum for further assistance.

    Windows hardware development

  • I have need of all my files and contacts for my Windows Live account. How to recover if the hotmail account has been compromised

    I wish I had my files and contacts with impatience on my Windows Live from my Hotmail account account. How I do it when I can't access the compromised hotmail account. If you are supposed to guarantee anything and everything on someone hotmail account then why if someone closes this account would allow you to someone of OTHER ACCESS to MY INFORMATION. ARE YOU ALL STUPID OR SOMETHING. Where is the right to private life. HUH. Why don't you guys to Windows fix this dam * problem.

    Hello

    The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/

  • To access the Contacts on Blackberry when MS Exchange is down

    I successfully sync my Blackberry 9000 "BOLD" to our MS Exchange Server through our Blackberry Enterprise Server server.  All of a sudden, our server MS Exchange or Blackberry Enterprise Server declined and the canoe are available.  My question is, are our users Blackberry still able to access their contacts, or view them.  I'm sure they can, but just confirm.

    Thank you

    Anthony

    Yes, all contacts are cached locally on the device and are available if BES, Exchange or your local network is down.

Maybe you are looking for

  • A50 wlan intel 2200bg will not work

    I have a problem with 2200bg wireless network card.Device Manager recognize it, but it does not start...I reinstalled the toshiba recovery cd, but it still doesn't work. (he has a! the Manager of devices and code 10)Can someone help me?

  • Question on Toshiba HDD Recovery tool

    Hello... * Delete (Toshiba hard drive recovery tool), the D disk so files will use it? * I want to use it, but I'm afraid of losing my files Post edited by: alm7b

  • Read all files in a folder over and over again

    I want to develop an application that reads all files in a folder, and once its done reading these files, it reads all the files again. The purpose of this application is to read all the files in a folder that are stored permanently in this folder, s

  • Cannot step 3 of 3 for Vista updates

    I have a number of Vista updates that will not be installed.  A site to help/support windows was a suggestion that you could install manually by going to the Microsoft Vista download site.  So, I chose the 2 most old and manually, and to install seve

  • USB stick not recognized by any computer

    Two days ago, that I restarted my computer for the updates to be installed. By mistake I left my USB drive (8 GB Sandisk) plugged during the entire process. Now, my computer, or any other computer will recognize. Sometimes the light and sometimes it