Questions of IDS-4215

I bought this unit and I have problems with it, I did the restore and I put the new password and pick-me-up Dungeon to it, how to make out of it?

CISCO SYSTEMS IDS-4215
Embedded BIOS Version 5.1.7 03/02/04 11:20:35.01
Compiled by dnshep
Evaluate the Options of execution...
Check for disc Image valid
GRUB, loading stage1.5.

GRUB loading, please wait...

GRUB version 0.91 (632K lower / higher than 523264K memory)

-------------------------------------------------------------------
0: cisco IDS (vmlinuz - 2.4.26 - IDS-smp-bigphys}
1: cisco IDS recovery
-------------------------------------------------------------------

Use the ^ and v keys to select which input is highlighted.
Press ENTER to start the operating system selected, 'e' to change the
orders before starting, 'a' to change the kernel arguments
before you start, or 'c' for a command line.

Entry 0 will be started automatically in 1 seconds.
Start ' Cisco IDS (vmlinuz - 2.4.26 - IDS-smp-bigphys} ")

root (hd0, 0)
Filesystem type is ext2fs, partition type 0 x 83
kernel (hd0,0)/boot/vmlinuz-2.4.26-IDS-smp-bigphys ro root = / dev/hdb1 had = flash)
Console = ttyS0 bigphysarea = 16384
[Linux bzImage, setup = 0 x 1400, size = 0x11b282]

Linux version 2.4.26 - IDS-smp-bigphys ([email protected] / * / _build_master) (version gcc 2.96 20000731 (Red Hat Linux 7.3 2, 96-112)) #2 SMP Thu Aug 18 11:03:13 CDT 2005
BIOS fitness card RAM:
BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
BIOS-e820: 000000000009e000 - 00000000000a 0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000-0000000020000000 (usable)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0 MB HIGHMEM available.
512 MB LOWMEM available.
On the node 0 totalpages: 131072
area (0): 4096 pages.
area (1): 126976 pages.
area (2): 0 pages.
DMI does not exist.
ACPI: Unable to locate the PDSP
Kernel command line: ro root = / dev/hdb1 had flash = console = ttyS0 bigphysarea = 16384
ide_setup: a = flash
Local APIC disabled by BIOS - reactivation.
Local APIC found and activated!
The initialization of the #0 CPU
Detected 845,655 MHz processor.
Console: the unit dummy color 80 x 25
Calibrating delay loop... 1684.27 BogoMIPS
Memory: 449240 k/524288 KB available (kernel code of 1621 k, k 74656 reserved, 639 k data, 136 k init, 0 k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Get cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
The page cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, D L1 cache: 16K
CPU: L2 cache: 128K
Architecture Intel machine control supported.
Intel machine check reporting enabled on CPU #0.
Enabling fast FPU save and restore... done.
Allowing the use of unmasked SIMD FPU exception... done.
Checking 'hlt' instruction... Ok.
UNIFIX POSIX compliance test
MTRR: v1.40 (20010327) Richard Gooch ([email protected] / * /)
MTRR: detected mtrr type: Intel
CPU: L1 I cache: 16K, D L1 cache: 16K
CPU: L2 cache: 128K
Intel machine check reporting enabled on CPU #0.
CPU0: Intel Celeron (Coppermine) stepping 0
by timeslice cut CPU: 365,62 usecs.
Motherboard undetected SMP.
Turned off turned on CPU #0
Value of ESR before activating the vector: 00000000
Value of ESR after activating the vector: 00000000
Local APIC interrupt using timer.
calibration of APIC timer...
..... CPU clock speed is 845,6568 MHz.
... bus clock speed host is 99,4889 MHz.
CPU: 0, clocks: 994889, slice: 497444
CPU0
Waiting on wait_init_idle (card = 0x0)
All processors have been init_idle
PCI: PCI BIOS revision 2.10 to 0xff6a9, last bus = 1 entry
PCI: Using configuration type 1
PCI: Hardware probing PCI
PCI: Hardware probing PCI (bus 00)

Limitation of direct transfers of PCI/PCI.
ISAPNP: digitization of the PnP cards...
ISAPNP: no Plug Play devices & found
Linux NET4.0 for Linux 2.4
Swansea University Computer Society NET3.039-based
The initialization of the RT netlink sockets
From kswapd
bigphysarea: 16384 pages for 0xc1606000.
Responsible journaled block device driver
Pty: 2048 Unix98 ptys configured
keyboard: there is no Timeout - at THE keyboard? (ed)
keyboard: there is no Timeout - at THE keyboard? (f4)
Series c 5.05 driver version (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI active ISAPNP
ttyS00 at 0x03f8 (irq = 4) is a 16550
ttyS01 at 0x02f8 (irq = 3) is a 16550
V1.10F real time clock driver
Initialized RAM disk driver: 16 discs RAM 4096 K size 1024 blocksize
loop: loaded (max 8 devices)
LPC: version 0.1 (August 18, 2005)
Uniform cross-platform E-IDE review pilot: 7.00beta4 - 2.4
IDE: assuming that the speed of the bus system 33 MHz for modes PIO; Override with idebus = xx
PIIX4: Controller IDE PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% natively: will probe IRQS later
ide0: BM - DMA at 0xf800-0xf807, BIOS settings: had: pio, hdb:pio
IDE1: BM - DMA at 0xf808-0xf80f, the BIOS settings: hdc:pio, hdd:pio
has: SanDisk SDCFB-256, CFA HDD
HDB: IC25N020ATCS04-0, ATA drive
has: disable DMA (U) to SanDisk SDCFB-256
BLK: queue c03bf1a8, I/O limit 4095 MB (mask 0xffffffff)
ide0 at 0x1f0-0x1f7, 0x3f6 on irq 14
has: attachment the ide disk driver.
had: task_no_data_intr: status = 0 x 51 {DriveReady SeekComplete error}
had: task_no_data_intr: error = 0 x 04 {DriveStatusError}
had: 501760 sectors (257 MB) w/1KiB Cache, CHS = 497/16/63
HDB: attached the ide disk driver.
HDB: host protected area-online 1
HDB: 39070080 sectors (20004 MB) w/1768KiB Cache, CHS = 2432/255/63, UDMA (33)
Check the partition:
has: hda1, hda2, hda3
HDB: hdb1, hdb2 hdb3 hdb4
IDE: late registration of the driver.
Review SCSI subsystem driver: 1.00
I2C-core. o: i2c core module version 2.8.7 (20040611)
I2C - dev. o: i2c/dev entries driver module version 2.8.7 (20040611)
I2C - proc.o version 2.8.7 (20040611)
I2C-i801 version 2.8.7 (20040611)
Net4: Linux 1.0 for NET4.0 TCP/IP
IP protocols: ICMP, UDP, TCP, IGMP
IP: routing 4096 buckets cache hash table, 32Kbytes
TCP: Hash tables configured established 131072 bind (65536)
Linux IP router multicast 0.06 and PIM - SM
Net4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
Ext3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 file system) readonly.
Release of memory used kernel: 136 k released
INIT: initialization of version 2.84
Welcome to CIDS v4.1 (1) S47 (Phoenix)
Mounting proc filesystem: [OK]
Configuration of the kernel parameters: [OK]
Setting clock (localtime): my Apr 19 19:14:53 UTC 2010 [OK]
Activation of swap partitions: [OK]
Hostname parameter sensor: [OK]
modprobe: can't open dependencies file /lib/modules/2.4.26-IDS-smp-bigphys/modules.dep (no such file or directory)
Checking file system root
/ dev/hdb1: clean, 27334/83520 files, 56775/166666 blocks
[/sbin/fsck.ext3 (1)-/] fsck.ext3 - a/dev/hdb1
[OK]
Back the root read / write file system: [OK]
Find the module dependencies: depmod: can't open /lib/modules/2.4.26-IDS-smp-bigphys/modules.dep for writing
[NOT]
Checking of file systems
/ dev/hdb3: clean, 12 files, 2008, 1300/8032 blocks
/ dev/hda1: clean, 33/2656 files, blocks of 4184/10584
/ dev/hdb4: clean, 32/2280320 files, blocks 80505/4558443
/ dev/hda3: clean, 20/58232 files, 84949/232848 blocks
Check all file systems.
[/sbin/fsck.ext3 (1)-/ bootmnt] fsck.ext3 - a/dev/hda1
[/sbin/fsck.ext3 (2)-/ usr/cids/idsRoot/shared] fsck.ext3 - a/dev/hdb3
[/sbin/fsck.ext3 (2)-/ usr/cids/idsRoot/var] fsck.ext3 - a/dev/hdb4
[/sbin/fsck.ext3 (2)-/ mnt/recovery] fsck.ext3 - a/dev/hda3
[OK]
Mounting local filesystems: [OK]
Activation of local file system quotas: [OK]
Activation of the swap space: [OK]
Non-interactive startup entry
Setting the network parameters: [OK]
Set up the loopback interface: [OK]
modprobe: can't open dependencies file /lib/modules/2.4.26-IDS-smp-bigphys/modules.dep (no such file or directory)
Setting up interface eth1: [OK]
Start recorder system: [OK]
Kernel start recorder: [OK]
Load keymap: [OK]
Loading system font: [OK]
The initialization of the random number generator: [OK]
Audit of the allocated kernel memory: [OK]
No XL map shows
Charge Cidmodcap: WARNING: the kernel-module version mismatch
/lib/modules/CID/cidmodcap.o was compiled for kernel version 2.4.18 - 5smpbigphys
While this kernel version 2.4.26 - IDS-smp-bigphys
/lib/modules/CID/cidmodcap.o: symbol register_chrdev_Rsmp_0450333d pending
/lib/modules/CID/cidmodcap.o:
Tip: You are trying to load a module without a GPL compatible license
and unresolved symbols.  Contact the provider module for
help, only they can help you.

[NOT]
Creation of boot.info [OK]
Checking for changes to the system since the last boot [WARNING]
Check the identification of the model [OK]
Model: IDS-4215
Error: mainApp has not started
From sshd: [OK]
From xinetd: [OK]
From crond: [OK]
From anacron: [OK]

Login: cisco
Password:
You are required to change your password immediately (years)
Change password for cisco
(ongoing) UNIX password:
New password:
Retype the new password:
NOTICE *.
This product contains cryptographic features and is under the United States
and local laws governing the import, export, transfer and use. Delivery
Cisco cryptographic products does not imply permission to third parties to import,
export, distribute or use encryption. Importers, exporters, distributors and
users
sensor connection: cisco
Password:
NOTICE *.
This product contains cryptographic features and is under the United States
and local laws governing the import, export, transfer and use. Delivery
Cisco cryptographic products does not imply permission to third parties to import,
export, distribute or use encryption. Importers, exporters, distributors and
users are responsible for compliance with U.S. and local country. With the help of
This product you agree to comply with the regulations and laws in force. If you
are unable to meet the United States and local laws, return the product.

A summary of U.S. laws governing Cisco cryptographic products to:
http://www.Cisco.com/WWL/export/crypto

If you need assistance please contact us by mail at
[email protected] / * /.

connection of the sensor:

Since you did the recovery I assumeyou already tried to the unit powering down and back up.

This is a weird problem I havn't seen before, but sometimes the sensors get currupt and need a full reimage to return to normal.

I would like to download the most recent image 4215 and TFTP in your sensor in ROMMON.

http://www.Cisco.com/en/us/partner/docs/security/IPS/6.0/installation/guide/hwImage.html#wp1030874

-Bob

Tags: Cisco Security

Similar Questions

  • If the IDS 4215 platform support E4 7.0 (2)

    Hello

    We are trying to upgrade the engine in our IPS and IDS devices. We have a single device IDS 4215 in our environment that installed with engine E3. Please let me know as this engine support E4 with 7.0 platform (2) version. If so, please update me with the name of the .pkg file. Thank you.

    Vinoth salvation,

    The IDS-4215 sensor does not support the version of the IPS 7.0 software. The latest version of the software supported on this platform is 6.0.

    He argues, however, E4 engine in combination with the version of the software 6.0 (6).

    To upgrade your sensor to the E4 engine (and use the latest signatures), improve it with the 6.0 (6) E4 software package pkg file.

    You can download this update from the link below:

    http://tools.cisco.com/support/downloads/go/PlatformList.x?sftType=Intrusion+Prevention+System+%28IPS%29+System+Upgrades&mdfid=278244333&treeName=Security&mdfLevel=Model&url=null&modelName=Cisco+IDS+4215+Sensor&isPlatform=N&treeMdfId=268438162&modifmdfid=null&imname=&hybrid=Y&imst=N

    If you are currently using version 6.0, you will just need the "IPS-engine-E4-req-6.0-6.pkg" file to upgrade the engine, if you are on an earlier version of the software, you will need to download "IPS - K9 - 6.0 - 6 - E4.pkg"

    Be sure to read the readme file before the upgrade:

    http://www.Cisco.com/Web/software/282549759/32618/IPS-Engine-E4.Readme.txt'

    Let me know if you have any other questions.

    Best regards

    Stijn

  • IDS 4215, good place for an interface sniff (LAN or DMZ)

    I have this sensor with two interfaces only at work, I was asked to check that

    See the IDSWORK version #.

    Application partition:

    The Cisco Systems Version 1.0000 S47 Intrusion detection sensor

    2.4.18 - 5smpbigphys-4215 OS version

    Platform: IDS-4215

    an interface that is Ethernet 0 connected to switch in the DMZ, and 1 Ethernet connected to switch 4005, logically I have to monitor DMZ not switch box 4005 (since I had only two interfaces, my case), I'm right?

    That means that ethernet 0 should be to sniff (surveillance) since it is connected to the DMZ and interface 1 for command and control, since it is connected to switch 4005, but according to cisco specifications

    http://Cisco.com/en/us/products/HW/vpndevc/PS4077/products_configuration_guide_chapter09186a008055df7d.html#wp1051279

    Table 5-2

    FastEthernet0/0: Interfaces supporting VLAN pairs Inline (port detection)

    FastEthernet0/1: Interfaces do not support Inline (command and control Port)

    Note: Cisco has mentioned FastEthernet, one I had Ethernet, makes all the difference?

    Because I did not have this configuration, he made by another, should I change this?

    It seems that your credentials are equipped with the basic ports (2 x Ethernet) with E0 C & C port, while E1 is followed by port.

    BTW, Ethernet/FastEthernet ports are in fact the same.

    To monitor your DMZ segment, then place the E1 in this segment, as E0 on inside segment where in addition to directing the Manager of its web management or CLI interface box, you probably can use basic VMS that comes free with it.

    And since you have dedicated switch to host the entire DMZ segment, you can easily monitor box (SPAN) all and send all traffic to the IDS.

    If you need to change the configuration, you may need to test at least to verify signatures is enabled/disabled and pc/mgt host is allowed to access the box and so on. But it is a good practice for audit and review the new config/setup, as it is a security zone, you need to do to monitor trust and you talk about all the possible threats, attacks or violations.

    HTH

    AK

  • License on Cisco IDS 4215 box

    I have IDS 4215 (version 4) works fine for 2 years. All of a sudden I could not access the IDS4215 via the console or telnet last month. I rebooted it, but there is no change.

    Then we get the ROMMON prompt via CTRL-R. We performed procedures "Installation image of the system IDS-4215. We have installed version 5. So, we lost the old license for IDS 4215 ver 4. How can I get old license?

    We want to make the 4215 IDS to work with version 5 and the latest signatures. What should we do in this regard?

    It wasn't a license file in ver 4.

    Licenses were introduced in ver 5.

    Licenses are included as part of your Cisco Service for IPS maintenance contract.

    To see if you have a contract to day just go in the license of IDM configuration page and click on the button to say IDM to check cisco.com for a license.

    If she comes back with a license while your contract is up to date and everything is good.

    If she does not return with a license, then probably you don't have a Service Cisco IPS service contract for your sensor.

    Your Cisco or an authorized Cisco reseller sales Reprentative contract and request a quote for Service Cisco IPS contract for your sensor.

    Don't forget to give them the serial number of your sensor when you buy the contract so it is followed correctly in the database of contract of Cisco.

  • IDS-4215 virtual sensors

    Can I have several virtual devices on 4215 executes code 6.0?

    Unfortunately, IDS-4215 does not support many virtual devices.

    Here is the URL for your reference:

    http://www.Cisco.com/en/us/docs/security/IPS/6.0/Configuration/Guide/IDM/dmAnEng.html#wp1035318

  • Cisco IDS 4215 signatures update

    Hello people,
    We have a few Cisco IDS 4215 and would like to know if the upgrade of signatures, we can remove those released previously or whether precedents should not be eliminated.

    Information system of these devices.

    ***

    TAC-contact information
    URL: http://www.cisco.com/public/support/tac/home.shtml/
    Phone: 1 (800) 553-2447

    Sensor time is 110 days.
    Platform: IDS-4215-4FE-K9
    Boot partition: application

    Partition: application
    Build version: 6.0 (6) E3
    Host:
    Domain keys key1.0
    Definition of signature:
    Update of the signature S439.0 2009-09-30
    Virus update V1.4 2007-03-02
    OS version: 2.4.30 - IDS-smp-bigphys
    Applications
    MainApp
    N NUBRA_2009_JUL_15_01_10_6_0_5_57 2009-07-15 T 01: 15:08 - 0500 ipsbuild
    The executing State: running
    AnalysisEngine
    N NUBRA_2009_JUL_15_01_10_6_0_5_57 2009-07-15 T 01: 15:08 - 0500 ipsbuild
    The executing State: running
    Updates installed
    Update name: IPS - K9 - 6.0 - 6 - E3
    Once installed: July 15, 2009 18.48.06
    Update name: IPS-GIS-S439-req - E3.pkg
    Installed time: 6 October 2009 13.07.55
    Next lower upgrade:
    Partition: recovery
    Build version: 1.1 - 6, 0000 E3

    PEP Udi chassis
    Description sensor unit IPS 4215
    PID ID-4215-4FE-K9
    vid V01
    SN 88808513168

    Memory usage
    usedBytes = 377655296
    freeBytes = 132685824
    totalBytes = 510341120

    Use of the disk
    the application data uses 33.2 M off 166,8 M bytes of disk space available (21% of use)
    start using 37.6 M off 68.6 M bytes of disk space available (58% of use)
    Application log using 529,5 M off bytes of 2.8 G of disk space available (20% of use)

    ***

    Many thanks in advance,

    Luca

    Luca;

    Signature updates are cumulative, so you can simply ask the S493 update.  A caveat, however, if you need to make a big move in the signature release (say S470 to S493) it is usually more effective to make small updates (especially on a platform of low memory as the IDS-4215).

    Scott

  • Error on server IDS 4215 TLS certificate VEI

    IDS 4215 5.0 software version not connect with IVE and IME server. "" IOException when trying to get the certificate: java.security.cert.CertificateExpiredException. error message is displayed. How this can be solved?

    Hello

    I think it's easy, please go to the CLI and try the following?

    generate TLS keys

    Let me know the results!

    http://www.Cisco.com/en/us/docs/security/IPS/6.0/Configuration/Guide/CLI/cliTasks.html#wp1036929

    Mike

  • How to see the log files in IDS 4215

    Hi all

    I have an IDS 4215, I want to check the Logs of the system for this ID, as Interface something like that.

    Thanks in advance.

    All system messages, including signature events are all 'show' commands.

    Enter the command show event displays only events in real time. If you want ot, past events, you need to add a time to the command option; show events past 20:00

    -Bob

  • IDS 4215 date and time change after restart

    Hello

    I am facing problem with cisco IDS 4215 (version 6.0), date and time of change in the device after reboot. What is the command to save the configuration. record or write mem does not work.

    Amarjeet Singh

    Once the date and time changes are applied Cisco IPS CLI, they should have been saved. No additional step of "savings" manually is necessary.

    Also, have you thought about Configure NTP on IPS server. IPS synchronizes time with NTP server, if there is no difference.

    I suggest you contact Cisco TAC and report the problem of equipment.

    Kind regards

    Sawan Gupta

  • The system IDS 4215 sensor no IPLogs

    Can someone enlighten me please?

    I have configured a sensor 4215 running the latest version 4 of the software & signatures.

    I have configure the sensor to use a Pix to help fleeing, the configuration worked for more than a week and I chose some to block on signatures and it works and I can see guests in the red list.

    My problem is that under , there is no listed log files,

    Is this correct?

    In version 3 on a 4210 sensor there are several listed log files, these are downloadable on my local machine, where as soon as I could import them in event IDS Viewer and display all events, this is no longer how it's done in version 4?

    What I can do under , is see the list of events that have been posted through the web page of IDM.

    Any help would be greatly appreciated.

    Concerning

    Mark

    First of all, I think that there is some confusion between the IP logs and alarms logs.

    There are 2 types of log files in version 3.x.

    The traditional log file which contained alarms in a comma delimited format that can be imported into VEI.

    The second was an IP trail which was a log of the actual binary packages that have been observed after the signing of fire.

    The action of "log" on the signature would result in the creation of a file of Log of IP and had nothing to do with or no alarm was recorded in the comma-delimited log file.

    Logging of alarms in the comma-delimited log file was controlled by will loggerd has been enabled on the sensor and if loggerd has been installed as a destination for messages in the destination file.

    In version 3.x, you might download individual logs to your own PC files and open them in IEV or load them into your own database.

    In version 4.x is therefore more the concept of individual alarms for files and the log of the IP on the sensor data.

    The alarm logs have been replaced by a circular buffer called eventStore. It can be compared to a large circular database. The eventStore is 4 GB in size and when it is full will begin to overwrite the oldest alarms with the most recent alarms.

    IP logs have been replaced by a similar circular storage for the journal of intellectual property data.

    The data of the alarm in version 4.x cannot be FTP'd the sensor as a diary of the alarm.

    Instead, you have two options:

    (1) use IDM to query the eventstore and pull the alarms that match some criteria. You can then view messages in plain text format.

    (2) use the command "Show events" CLI to do the same thing as IDM can do.

    3) contact Cisco TAC and ask for RDEP specification which provides the syntax for you to create your own queries to plug into the sensor and fire alarms in a raw XML format that you can then load into your own database.

    (4) If you are a user of VEI then the 4.x VEI has the ability to pull older alarms of the probe.

    http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids10/idmiev/swchap6.htm#604023

    In the device properties simply, with the older start time and VEI will automatically extract in these earlier events of the sensor.

    NOTE: It is not a function import that can import plain text or events XML you would see options 1, 2 or 3 above. SO if you want to see in VEI then use option 4.

    Now for iplogs they can be FTP'd to the sensor using the command copy. But iplogs are the binary packet data and not a list of alarms. They are created only when the action of "log" is selected.

    NOTE: IP logging consumes resources sensor and can slow down the performance of the sensor. It is not necessary to IP Log an alarm to see the alarm itself VEI or other management positions. If the action of "journal" that should rarely be used when the binary packet data are necessary.

  • Questions about IDS 4.0 and 4.0 VEI

    I played with IDS/IDM/VEI 4.0 and so far, I am really impressed with the upgrade!

    A few questions/suggestions:

    (1) with IDM, to detect the signature configuration, is there a quick way to edit a particular number of signature? For example I mean tune signature 3041 - the only way I can find to do if I don't know the category is to collect all the signatures, then try to guess which page it's. I think that the previous version had a pop-up that listed the range of signatures on each page.

    (2) a Suggestion: in VEI, looking at a view, the first column is a group, and the second column contains the number of elements contained in this group. However, a double click on the first column does not give detail, only double clicking on column 2. It would be nice if the first column is also. (For example, for the severity level group, it would be nice to double-click on the word 'High' to see all the signatures of high status.)

    (3) is there a simple way to VEI or IDM to see connections have been blocked? It would be nice to have a summary paper when connections have been blocked and which IP addresses have been affected. It would also be groovy if it was shown in the VEI in the individual events (IE. Add a column 'Action' showing what decisions have been taken, as appropriate for each shot of signature)

    (4) is it possible to export the settings I changed default value? So far I've just kept a Notepad file that lists the signatures I've set in case I have to re - install. (And from the looks of it, upgrade to the latest signatures wiped out my block settings)

    (5) what is the difference between ShunHost & ShunConnection? The documentation does not really. And it is designed to work with IOS vs Pix fleeing?

    (6) the Docs for IDM imply that system variables can be used in the event filters, but when I try to apply the system IN variable for a filter, it won't let me so I have to type in logical addresses.

    That's all for now!

    I am pleased to hear that you like the new versions. My answers to some of these questions/comments I hope to improve your experience.

    (1) with IDM, to detect the signature configuration, is there a quick way to edit a particular number of signature? For example I mean tune signature 3041 - the only way I can find to do if I don't know the category is to collect all the signatures, then try to guess which page it's. I think that the previous version had a pop-up that listed the range of signatures on each page.

    ANSWER: not at the moment. We have heard this feature of multiple users request. A future version 4.0 is already planned to bring back the feature 3.1 (announcement of the signature by page range). Cannot comment on when this version will be released.

    An alternative until then would be to select the option to view all transmissions on the page (it will take a while to load), then use the search button in your browser to take you to the line for the signature.

    (2) a Suggestion: in VEI, looking at a view, the first column is a group, and the second column contains the number of elements contained in this group. However, a double click on the first column does not give detail, only double clicking on column 2. It would be nice if the first column is also. (For example, for the severity level group, it would be nice to double-click on the word 'High' to see all the signatures of high status.)

    ANSWER: I'll pass it on the developers.

    (3) is there a simple way to VEI or IDM to see connections have been blocked? It would be nice to have a summary paper when connections have been blocked and which IP addresses have been affected. It would also be groovy if it was shown in the VEI in the individual events (IE. Add a column 'Action' showing what decisions have been taken, as appropriate for each shot of signature)

    ANSWER: IDM manual locking tab will provide you with the current block list as allow you to add blocks or remove existing blocks.

    It's called 'Manual blocking' but it will also show you the current 'automatic blocking' (you may switch to another screen IDM, and then return to be refreshed with the latest red list)

    http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids9/idmiev/swchap5.htm#195940

    Also, you can run the line "view events" to show you what the blocks have been tried. If I remember correctly, the events to see the line you would be: "view the events of the NAC" where the time and date is the entrance earlier you want to display. (NOTE: NAC = Network Access Controller - replacement for managed in the new sensor V4.0).

    I recommend playing with the different possibilities to show events to see the different information that the sensor can bring in the new CLI.

    In addition, the attempted action is now included in the alarm itself and IEV should have a column IPLOG, SHUN and TCP Reset show what action was attempted. You check the settings, and then make sure that you have these selected columns is displayed in your view. (The actions attempts are visible when looking at individual alarms and not all summary windows)

    (4) is it possible to export the settings I changed default value? So far I've just kept a Notepad file that lists the signatures I've set in case I have to re - install. (And from the looks of it, upgrade to the latest signatures wiped out my block settings)

    CLI the commmands to check:

    more current-config - gives a style CLI listing the configuraiton, under the area of virtualSensor, it shows you just changes to the signatures rather than see the definition of default full signature.

    Copy current-config config backup - backups your current config in a storage space on the sensor itself

    Copy current-config - allows you to save your configuration to the location. The location could be an ftp server, or scp.

    Example:

    copy @10.1.1.1/config-backups/sensor1-config ftp://usercurrent config

    (5) what is the difference between ShunHost & ShunConnection? The documentation does not really. And it is designed to work with IOS vs Pix fleeing?

    Shun host creates the following ACL entry:

    refuse any ip

    SO it blocks all packets from the source.

    Shun connection on the otherhand creates the following ACL entry

    (NOTE: I am doing this out of memory so I'm not entirely because of my response below, you may need to test to know for sure):

    refuse eq

    SO it blocks only the packets from the source to the ip of the victim who go to the same port where the attack occurred.

    NOTE: Multiple connections to the same srcip Shun may cause the glines being combined into a single host Shun to prevent that IP to fill your ACL list.

    Regarding IOS vs PIX. The above commands are for IOS. Similar entries can be seen with the command "run away" from the Pix, but no matter what you enter with the command "run away" from the Pix, he will always shun the entire source ip address. So if you Shun connections with a Pix command "escape" has other information, but the Pix will always shun the sourceip together.

    (6) the Docs for IDM imply that system variables can be used in the event filters, but when I try to apply the system IN variable for a filter, it won't let me so I have to type in logical addresses.

    Looks like maybe it's a bug.

  • Troubleshooting of the IDS 4215 interface detection

    Hello!

    I am deploying IDS4215 with interface of remote sensing (Fa0/1) connected to the SPAN Cat3750 Gig1/0/1 interface.

    The problem is the following. The ID works for a while (I am able to view alerts and States 'show int' Fa0/1 located upward). Then after awhile Fa0/1 goes down, I don't know why.

    The Cat3750 shows that State of Gig1/0/1 passes the "follow-up" to "notconnect. All I can do is restart IDS.

    Catalyst shows no error on the interface.

    I am a novice in ID, and I appreciate any idea where to start troubleshooting.

    Thanks in advance!

    SSM

    Catalyst settings:

    GigabitEthernet1/0/1 interface

    Span ID description

    full duplex

    Speed 100

    end

    control interface of the session 1 source article gi1/0/27 - 28

    control interface of the session 1 source Gi2/0/27 - 28

    control interface of destination session 1 item in gi1/0/1

    Config of IDS:

    ! ------------------------------

    ! Version 5.1 (1)

    ! Current configuration changed the game 22 dec 10:11:22 2005

    ! ------------------------------

    service interface

    Physics-interface FastEthernet0/0

    automatic duplex

    automatic speed

    output

    Physics-interface FastEthernet0/1

    FE0/1 description

    Admin-state enabled

    full duplex

    Speed 100

    output

    output

    ! ------------------------------

    service-analysis engine

    vs0 virtual sensor

    Physics-interface FastEthernet0/1

    output

    output

    In my view, that there is something seriously wrong with version 5.1 (1). Why Cisco continues to allow users to download is beyond comprehension. I will be rebuild about 20 sensors today because of this problem. I have rebuilt 6 sensors Friday [from an ISO image, models 4235,4240,4255] and let them run this weekend. 5 out of 6 have the sensor interface down once again.

  • How to monitor a Cisco IDS 4215 (version 6.0)?

    Hello

    I am new to this IDS and need an inexpensive or open source to collect and store the logs of this device.  It seems that the unit can only store a day or two of his own newspapers and I need to collect 1 year.  I have Red Hat linux machines at my disposal, but can use Windows devices or other forms of Linux if necessary.  It would be great if I could just have this thing log to a file on a Linux server on the local network. I can then configure scripts to view and create reports on the balls.

    I installed the IDM on my Windows desktop and can connect to the IDS, but don't see a way to collect newspapers, to trigger alerts by e-mail or create reports.  Is there something Cisco offers (without additional purchase) for this?

    Thank you

    Paul

    For email alerts, you can use IPS Manager Express http://www.cisco.com/en/US/products/ps9610/index.html I think that he will succeed up to 10 IPS sensors.

  • General questions Cisco IDS

    We are evaluating deploying a Cisco NIDS on our network. Someone told me that the Cisco IDS solution is based on NT (?). Say it isn't so!

    Also, the module NESTS or IDS can detect common IIS attacks like buffer overflow, cross-cutting to code red/blue/etc directory. ? The ID in the PIX firewall detect these attacks?

    Thanks for your time.

    With the code ID 4.0, all sensors that support this code run Linux, including autonomous sensors and the new JOINT-2.

    In the old code 3.0, stand-alone devices ran Unix, while the blade of sensor for the 6500 has Windows.

    Here is a link to the chapter on the engines of the 4.0 code signing:

    http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids9/idmiev/swappa.htm

    This will give you an excellent overview to the power of signature IDS 4.0 engines and the list of signatures, which includes most of the signatures you mention above.

    hope this helps,

    Peter

  • IDS 4215: application AnalysisEngine breaks down

    Hello!

    My IDS4215 from time to time shows the following error:

    errorMessage: name = errSystemError AppManager::ApplicationEntry:updateProcessStatus - Application "AnalysisEngine"ended prematurely.

    After this detection interface falls down and stops working. ORC contains no information on this error.

    Any suggestions how to fix it?

    Thanks in advance!

    PS Cisco Intrusion Prevention System, Version 1.0000 S205.0

    I was told by Cisco to rebuild my sensors as 5.0.

Maybe you are looking for

  • Not that it's sounds

    I just installed Firefox on windows 10, but I can not play sounds. It is not silent sort, I have reinstaled NDS flash have the latest version, I even deleted the cookies and cache, but in vain. What can I do?

  • My gopro4 videos play rough

    My gopro4 videos play choppy by a second interval. Gopro3 played very well. When I try to download an update of the graphics driver, it won't let me. (not enough room?) Is there any solution for this?

  • Start of satellite L10 fan speed and noise

    My L10 cooling fan start always maximum speed, when it turns on it always burst at maximum speed (and noise) and then slow down to a speed (and slient relative). This fan start noise is very annoying (as fan departure every half hour in office work a

  • How to set the horizontal and vertical screen on my desk

    I have a problem remembering how to return to the setting of the vertical and horizontal on my desktop screen. Now, he threw my TV formatting to reports of the screen.  Text information on the programs and ads are either too high or too low on the TV

  • When the small screen, the left side is out of the page. It started today. I have Windows Vista.

    I have a 15 inch screen.  When I use a smaller screen, say 10 or 14 inches, the demi-pouces left does not appear.  It started today.  I have Vista. I have not had any problems for 2 years before today with this machine (HP).