Questions of "Rebellion" Y570 mouse and keyboard

Similar Questions

• Mouse and keyboard no longer work after fixing drive dvd - Satellite A100-147

  My DVD Player wasn't working, so I fixed it with the help of some advice from a forum: go to regedit to remove the 'previous' and 'high' or something, I have a catalog specified.

  But then the keyboard and the touchpad is dead in Windows. Nor can I use an external keyboard and mouse.

  I tried to start it in safe mode and with the last settings that worked. None succeeded. Apart from the fact that the keyboard actually works to make choices, therefore, a question Ms.

  Ideas/fixes would be greatly appreciated.

  Computer: Equium a100-147
  OS: XP media center w/sp2 (I think)

  Maybe you deleted the upperfilters wrong or additional / lowerfilters?
  The correct key is {4D36E965-E325-11CE-BFC1-08002BE10318}

  Boot safe mode.
  Go to control panel-> Add/Remove Programs control
  Uninstall all software Mouse/touchpad/keyboard/logitech that can be installed
  Go to Device Manager
  go to view - > click on 'show hidden devices '.
  Delete all devices under "mice and other pointing devices" and "keyboards".
  Reset.
  XP should detect the mouse and keyboard and install the drivers.
  Download and install the driver for the touchpad to the A100 section drivers on the Toshiba site

• USB mouse and keyboard stop working after I have install Windows Update KB2913431

  After installation automatic Windows Update KB2913431 (Win 7 Enterprise), the computer seems to work very well, but my mouse and keyboard stop working.  The option of automatic repair after that start with F8 does not work.  He said that the error is "unspecified".

  The fool is that it has created a constellation of intermittent problems when I try other options to get these devices to function after the update.  The questions I will of unpowered USB ports, grateful Windows and install the drivers for USB devices, but then do not recognize their (and are not), random BSOD, restore points invalid system, random boot failure, which causes discs to randomly stop working properly, closed randomly , à... I think you get the idea.

  I think it must be a driver problem.  I passed through the Device Manager and uninstall all hidden devices.  I have updated the drivers for everything that has an update available.  I tried to disable all, but Microsoft services at startup and in the list of "services".  I've always been unsuccessful; However, when I can get it to successfully restore to a point before the update (none of the automatic restore points work correctly) it seems ok.  It will sometimes seem to work after I applied the update, but then go haywire shortly after.  I am convinced that it is not a hardware problem, given that the prior update restores (when they actually cross without failure) work very well.

  I went through countless articles in the knowledge base and tried all the suggestions I've seen, other than registry cleaners because I had a bad experience with this earlier.  I tried so many things that I lost count and the memory of some of them.

  I reached point is never install the update (an option that I prefer not to use) or creating a clean Windows install on another drive (an option that I prefer not to use, but I'm a little more friendly to).  I already started to back up files to prepare a clean install, but I reach out one last time before I pull the trigger.

  Thanks in advance for your suggestions you have!

  Edit: I thought I could include other system information.

  Motherboard: Gigabyte P67A-UMD
  -Drivers for integrated components:
  Related articles - USB:
  -Renesas Electronics 3.0 USB root hub
  -Renesas Electronics USB Host controller 3.0
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1 26
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1C2D
  USB root hub-
  -Generic USB Hub
  -Network:
  -Realtek PCIe GBE Family Controller
  Graphics card: NVidia GeForce 460 GTX (driver c. 332.21)
  Sound: NVidia High Definition Audio 4 x, Realtek High Definiton Audio x 1
  There may be a conflict here: the address of the Realtek driver is 00000201, which is the same address as * a Nvidia drivers.* *.
  Mouse: Logitech (MX518) G3 mouse optical - wired
  Keyboard: Keyboard wired simple Generic USB Dell
  All other USB devices are currently disconnected

  Thanks, but I tried to fix myself on a personal level - my IT Department is not hot.

  In any case, the problem was resolved after much googling - I took possession and renamed a bunch usb*.sys file in the Windows\System32\drivers folder, uninstalled items usb from Device Manager and did a scan for the hardware changes.
  This solves the problem.

• Can't install/uninstall Microsoft mouse and keyboard Center!

  Hi, I got problem with the Microsoft Mouse and keyboard Centre because he doesn't identify my touch mouse correctly (classified as a HID-compliant device and not by its name as my Sidewinder X 4 keyboard). I uninstalled from Add/Remove Programs, and I also uninstalled the drivers for my mouse AND my keyboard (because it showed a double receiver device in device manager). I restarted my computer, but when I tried to install the drivers again in the process of installing mouse and keyboard I got an error message telling me that it was already installed. I uninstalled it again (the "ghost" of it is still listed in Add/Remove Programs) and restarted. When I tried to reinstall, I got the message again who told me that it was already installed. This is when strange things began to happen. The program was once again listed in Add/Remove Programs (this time with its icon and not only a "ghost"). I tried uninstalling and received a message telling me that the uninstall process could not be met because some the original installation files have been corrupted or missing. But now, the program has been listed in the Windows Start menu and when I double click it it started an installation process ceased to immediately resume a message that mkc.msi was missing from a temporary file to My Documents, and he could not proceed, so now I can't install or uninstall the cursed thing. I tried to restore my computer but it doesn't solve all problems. I suspect that some registry entries are not deleted properly when the first uninstall process. I don't want to mess with the registry by myself, at least not until I know what registry entries are created by and in connection with the program. Any help would be appreciated.

  Thanks in advance

  Hello spmisik,

  Thank you for the question!

  I'm sorry to know that have problems you with Microsoft Center of mouse and keyboard. As I understand well you can't install/uninstall Microsoft Mouse and keyboard Center.

  I need to ask you some questions to help you best.

  1. the problem persists with a particular application?

  2. were there any changes (hardware or software) to the computer before the show?

  Run the fixit and check.

  Solve problems with programs that cannot be installed or uninstalled

  Answer to us if you are having problems with Microsoft Mouse and keyboard Center or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• I've upgraded to window 10, but not happy with windows 10 I returned to windows 7, but I'm unable to log on to the pc. the pointer of the mouse and keyboard are frozen device, even in safe mode.

  After the upgrade to windows 10, I loved not the style was thus to Windows 7, but I have not been able to log on the PC since. He's going through commissioning, but when on screen password box the pointer of the mouse and keyboard do not respond.

  This happens in safe mode for.

  The PC is a Sony Vaio laptop.

  Any suggestions,.

  John

  Hello Orwell,

  Thanks for posting your query in Microsoft Community.

  You have a Windows 7 installation disc?

  As you cannot start your computer at all, I suggest to run a Startup Repair to repair the damaged boot system files and try to boot into normal mode. See the section: How to use Startup Repair in the following link.

  Startup Repair: frequently asked questions

  If this does not help, try to boot from a disc to install Windows 7 on the Windows recovery environment mode and then try to run the Startup Repair tool and check if you are able to start normally with mouse and keyboard.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Microsoft Mouse and keyboard Centre will replace my bloody A4tech mouse software?

  Microsoft Mouse and keyboard Centre will replace my bloody A4tech mouse software? I just installed new parts and installed Windows 7. Now, he is asked to download MMKC. I have a Microsoft wireless keyboard, but a bloody mouse as mentioned. If I install MMKC and then replaces my software bloody thereafter, the MMKC and spoil my bloody software?

  Hello and welcome!

  He must control the keyboard only. You can always uninstall it later if you have any questions.

• Mouse and keyboard stop working

  I have windows 7 64 bit edition Home premium.  Intel I5 6 GB of Ram chip. Had this system for 3 years and no problem.  Today, when I myself post on someones facebook page all of a sudden my keyboard stopped entered the words I typed. did not work.   The mouse was working. I rebooted and it worked for a few minutes.  Then he stopped again.  I plugged in the keyboard to a different usb port and it started working, but then the mouse has frozen completely.  I put the mouse on a USB of Hung and it works for now.   My anti virus is so far - I even ran the Norton Patrick gum aggressively looking for problems and he came back with no risk not found.   Is there any type of virus which would attack the keyboard and mouse?  Did someone had experience with in the past?  I have not downloaded new software in a year so nothing new has been added unless there is an automatic update of windows.  Just checked and the last updated 2/15, a few weeks ago and today is the first time with the problem.

  Hi Carl,

  1. What is the brand and model of the mouse/keyboard/computer?

  2. do you get an error related to the question message/code?

  This problem might be caused by the virus, but this usually occurs due to drivers of bad/corrupt keyboard/mouse/USB host controller.

  I suggest you follow the troubleshooting steps for the mouse and keyboard from the Microsoft KB article and check if it solves the problem.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-NZ/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  Also refer to:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Mouse and keyboard suddenly crashes

  Start the computer and everything works normally (I have Win7 btw.). After some time, it can be for 20 minutes, or 3 hours, is not issue, the mouse and keyboard freeze, stop working. And there is a noise as if I disconnected something, I check the mouse and the hubs of keyboard and still nothing. I unplug them, but no sound, I have them and not of his new CAP.  I have PS/2 hubs, or something like that. What the more interesting, than other devices, like a controller or a video camera works normally. Please, help!

  Hello

  (1) when you are facing this problem?

  (2) remember to make changes before this problem?

  (3) what is the brand and model of the mouse and keyboard?

  I suggest you, refer to the article below and follow the instructions provided, check if it helps.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  If you have additional questions, feel free to post. We will be happy to help you.

• Mouse behaves badly after the update MS Mouse and keyboard Center

  I use a model wireless MS Mouse 4000 and MS Mouse and keyboard Center 2.1.177.0 worm installed.  Since this update the scrolling behavior does not work correctly.  In a particular program (a simulation game), scrolling works much too fast.  If I go into the centre of keyboard and mouse and adjust the scrolling speed, it works well.  But when I restart the previous settings seem to be lost, so I have to put once again.  I use Win 7-64 bit.  The mouse worked fine before the 2.1.177.0 version.  Any suggestions?  TIA

  PS I vaguely recall a default update but can find no trace of that.  Running MS Mouse and keyboard Center seems normal.  There is no obvious command 'save settings', so I guess it does it automatically.

  Paul

  Hi Paul,.

  Thanks for posting your question on the Forums of community of Microsoft.

  Check out the link and follow the steps in the article:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398#appliesTo

  See also:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/is-is/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab05

  Check out the link and check the number of the update has failed.

  See the Windows updates are installed

  http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed

  If you are able to get the number of the update failed, try to install the updates manually.
  Reference:
  http://www.Microsoft.com/en-us/download/default.aspx

  Hope this solves the problem.

• Windows 7 take too long to the mouse and keyboard anable.

  Hello

  I have replace my SSD HARD drive (2 hard drives 120 GB each RAID 0) w / Windows 7 Pro 64 bit. After the replacement windows take longer time to activate the mouse and the keyboard - 5/10 seconds.
  I've updated the drivers for the two, but still have the same question. The boot is faster, but the mouse and keyboard take longer to wake up.

  Any help?

  Thank you

  M. Vilela

  Hi MVilela,

  Thanks for asking this question to Microsoft Community!

  I understand that after the replacement of the hard disk of the computer takes too long to turn on the mouse and the keyboard.

  Your Windows 7 is better suited in the TechNet forums. I suggest you to send your query there.

  Here is the link: http://social.technet.microsoft.com/Forums/en-us/w7itproperf/threads

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Microsoft Mouse and keyboard Center recognizes not Microsoft Wireless Notebook Optical Mouse 3000 says no device detected

  Original title: Microsoft Mouse and keyboard Center does not recognize my Microsoft Wireless Notebook Optical Mouse 3000'

  My Microsoft Wireless Notebook Optical Mouse 3000 works fine but when I click on it in the devices section and printers on Panel, Microsoft Mouse and keyboard Center does not recognize. It displays the text "No Device detected". Here is a screenshot of what I see:

  

  Hi faignard,

  Thanks for the reply. It is regrettable that uninstall the existing mouse device manager drivers did not help to solve the problem.

  I suggest that you go to the program and features under programs installed and check if there are any associated with IntelliPoint software or any software application related to the mouse installed. In the affirmative, please go ahead and uninstall them and then try to install the driver software IntelliPoint 8.2 in compatibility mode as stated in my previous post dated 22 December 2014. See the following link on how to uninstall program:

  http://Windows.Microsoft.com/en-us/Windows-8/uninstall-change-program

  Please answer us on the State of the question to help you further.

• Sculpt the Touch Mouse: mouse and keyboard not fully functional Center

  I bought and installed a Microsoft Sculpt Touch mouse. The Strip in the center of the mouse has three buttons by default assigned to the previous Page, click Middle and Page Down. I installed the mouse and the keyboard Center (v 2.3.188.0) to reassign these buttons but it allows to assign the button in the middle of the band. How can I redirect the other two buttons?

  Documentation for the mouse and the keyboard and mouse Center also says that I can assign macros to keys, but the mouse and keyboard Centre does not appear to include these options. How can I assign macros to my mouse keys?

  Thank you
  Tony.

  Hi Tony,.

  Thank you for the update on the question and sorry for a delayed response.

  If after reading the article you don't how how to reallocate the PageUp and PageDown button on the median strip, then in this case I suggest you get in touch with support of Microsoft Hardware team.

  Keep us updated on the issue.

  Kind regards.

• Mouse and keyboard using derivation

  I bought a diversion so that I can use my keyboard and the mouse in another room. I use a PC Compaq Presario SR2038X Media Edition. My question is which PS/2 port on the back of my desktop PC I plug, mouse or keyboard? My PC supports this separator with 1 cable to carry both mouse and keyboard, if not what can I do?

  Thank you

  Wall-e, as far as I know, the separator should work.  Try plugging in the keyboard first, port if this does not work, change it around.  When connected properly, it may report the keyboard on the wrong port, or vice versa.

• Mouse and keyboard Microsoft Wireless Comfort 5050

  Mouse and keyboard Microsoft Wireless Comfort 5050 will work with my MAC

  With due respect, look at the configuration required for the keyboard and the mouse and see if your iMac has the bare. You can find this information by clicking on https://www.microsoft.com/accessories/en-us/products/keyboards/wireless-comfort-Bureau-5050/pp4-00001 #specsColumns - testCarousel

  My guess is Yes, but you were not specific about which iMac you have so I can't say for sure.

• 23-1000 all-in-one Pavilion: mouse and keyboard stop working

  I had my all-in-one since end of February 2016 - bought at Best Buy local - touch screen pc works still but don't do me any good because the mouse and keyboard do not work after 3 months of excellent performance.  Both have new batteries.  Can be signal problem because I've set up wireless.

  Help - frustrated and have no idea what to do.

  Thank you

  Terry Anderson

  Hello @MaggiesMimi,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post on the issue of the keyboard and the mouse.  I understand that they both stop working recently, and you have already replaced the batteries.  I can certainly help you with this!

  First of all, try to review the following document and let me know how it goes:

  HP PC - keyboard and wireless mouse troubleshooting

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!