Questions of Virtual VCS

Similar Questions

• REALLY stupid question about virtual machines and disks of cancellations.

  I'm a bit hesitant to ask this question because it might make me look stupid, but...

  When I'm done using Virtual PC and a virtual machine running Windows XP Pro with Vista 64 Home Premium because the host os, often I did not any significant changes to the hard disk of the virtual machine.

  What I save gets saved to a network share on my server for files and printing from Win98 and saved on a flash drive.

  Assuming that I do no configuration changes or anything else I want to keep, is there a reason barely stopping properly when I 'cancellations discs' enabled?

  Any reason, I can not save time by pressing the 'X' button and choose 'disable and remove changes '?

  I am aware of patches, but took me to inform me of the patches, and I can get patches when it's convenient for me and I always validate changes when I install the patches. I'm not using it for anything other than my classes of the school of the evening for the time being, so it is not much of a value of protection on the virtual machine, and I used to write papers on the host operating system. I just use the virtual machine to play with the admin tools in an environment where I can easily fix it a massive screw-up without spending hours to reinstall Windows.

  Hey SlickRCBD,.

  Not a stupid question at all! :)

  It's very well hit the X when you have activated the disks of cancellations. And corruption or problems with the active virtual machine will be resolved when using the drive to cancel it.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Questions of Virtual Private Network (VPN) connection

  OK I did some research on the private network connections, and I have a few questions:

  • Is it true that a connection to a vpn is possible thanks to a transport to a Wi - fi (I want to connect to a network non - bes)?
  • As far as I know, you can connect to a vpn only if create you a vpn manually account via the phone options menu. Is it possible to programmatically create the connection without having to manually create the profile?
  • This connection can be established via a proxy server?
  • Any article or the sample code will be really appreciated

  BlackBerry Smartphones have supported integrated to connect through a VPN using WiFi.  Other transport routes are not supported out of the box for this.

  There is no way to programmatically configure a VPN.  Virtual private networks can be configured on a BlackBerry Enterprise Server and pushed to users.

  BlackBerry Enterprise Server is able to connect through a proxy server.  All of the BlackBerry Java API does not include API to manage proxy communications.

• TMS and virtual VCS

  Hello

  I know that the VCS and TMS can be virtualized.

  On the documentation, I found that the VCS can be deployed on the same host as the other virtual machines (cohabitation) following some guidelines for sizing (resourses must be allocated 1:1, it means that there is no excess applications).

  I also read that MSDS can also be virtualized, following the same guidelines of resources:

  "Cisco TMS can be installed in a virtualized server environment as long as the virtual machine by a Cisco TMS is allocated sufficient resources dedicated to meet the requirements of server and hardware for installation. The resources allocated to the Cisco TMS server instance must be dedicated and not shared with other instances of server. ""

  What I do not know if the TMS accepst co-residensy with other applications. Which makes me doubt is:

  "Cisco TMS is resource intensive with specific server requirements, which increase with the level of activity and the size of the managed network video. With the help of a server that hosts other applications or Web sites for accommodation Cisco TMS is therefore not supported. "

  I don't know if this means that non-corresidensy is supported or that no other application in addition to TMS must be deployed on the same OS.

  What I really want to accomplish with it is to virtualize the TMS, the VCS Highway and control of the VCS on the same server of UCS. Would it be supported by TAC?

  Kind regards

  Hi, this means that the TMS server should be dedicated to the application of TMS. No other hosted applications should be present on the same OS.

  Hope that helps.

  Sent by Cisco Support technique iPhone App

• Question of syslog VCS

  Everything started working with VCS/TMS, group get our syslogs asks me a few questions.  The events are connected on the syslog seem to correspond to events since the events and Configuration logs, but do not seem network logs appears.

  Here are the specs:

  VCS - ver7.1

  Under system > Logging > Log level = 2

  Not sure if this is normal or not?

  Hi David,

  syslog on VCS only provides the event logs. He also noted the network logs but relating to SIP messages. see the Administrator's guide for x7.1 for more updates.

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/admin_guide/Cisco_VCS_Administrator_Guide_X7-1.PDF

  Assigned level events

  Level

  1

  High-level events such as registration and attempts to call. Easily human-readable. For example:

  call n attempt/connected/disconnected

  n record attempt/accepted/rejected

  Level

  2

  All level 1 events, more:

  n logs of sent and received messages Protocol (SIP, H.323, LDAP, etc.) excluding loud messages

  as H.460.18 KeepAlive and video H.245 fast-updates

  Level

  3

  All level 1 and level 2 Events, more:

  Protocol n KeepAlive

  n SIP calls and signaling messages

  Level

  4

  The more detailed level: all level 1, level 2 and level 3 events, more:

  SIP n network level messages

  You can control which events are logged by the VCS by setting the log level. All events with a level

  numerically equal to and below that the specified logging level are recorded in the event log. Thus, at level 1,

  Only level 1 events are recorded; at level 2, level 1 and level 2 events are recorded and so on. The default journal

  level is 1.

  Note that:

  n logging at level 3 or 4 is usually not recommended because the event log may contain a maximum of 2 GB of data

  and logging at these levels on a busy system can cause the event log be recycled too quickly.

  Thank you

  Alok

• Question about virtual disk

  I have a qustion about virtual disks

  I assigned 5 GB on a virtual disk. Then I realized that I need more space, so I changed to 20 GB.

  When I have energised the VM, it always complained not enough space. Even if I 'clearpart-set' in the startup script.
  I ended up remove the virtual disk and create a new one to solve the problem.

  "It seems that this partition table/information is always on the disc and kickstart' cleartpart all ' did not clean.

  How to solve the problem? instead of creating a new virtual disk?

  Thank you!

  curiousmind999

  I'll answer my own question

  If DD \u003d/dev/zero of = path/to/file bs = 512 count = 1

  to clear the boot on the VD partition

• Question about virtual cores

  Sorry if this has been asked somewhere else.  I tried to find the answer but am still confused.

  If I have a virtual host 24 hearts with 3 under VMs.

  I guess the best way to ask my question by describing two hypothetical scenarios.

  Scenario 1: I assign 1 virtual kernel for each machine.

  Scenario 2: I assign 8 Virtual cores for each machine.

  Each VM will have more CPU power in scenario 2?   Now, my assumption is that each virtual machine will be allocated 33% of the CPU in both scenarios, but I fear that scenario #1 will leave a lot of unused CPU power.

  Thank you.

  If I understand correctly, in other words, the amount of GHz... MHz... etc available to VMS is based on the value of the shares, so, based on your two scenarios, each will have 33 percent of the shares. Performance of virtual machines depends on how applications behave in MP. VMs CPU scheduling also changes with the number of vCPUs configured.

  Testing is the best way to answer this question.

• Questions of virtual volume B3

  When you select any virtual B3 organ in a channel strip and reading via a midi keyboard/controller, backing tracks I brought playback channel strips extreme excessive power of the volume on the band of B3. The backing tracks are usually files AIF of GarageBand, band in a box or iTunes songs.

  I tried setting the volume max on support of securities in half but still volume of bodies is low at best in comparison.

  As recommended (somewhere), my max allowed on the bands B3 volume is + 6.0db. I don't know if I should push this superior way or what.

  What is an expected result of a midi instrument? I don't notice it on Pianos, synths or some other instrument channels I tried.

  Thank you.

  You can increase the volume in the B3 plugin. The default volume is set at-6.

  

• Question of virtual operating system Windows Server 2012

  You can install and run an operating system of virtual 32-bit on a 64 bit Windows Server 2012 or 2012 R2?  This work through Hyper-V? What is the latest version of Windows Server that can run the 32-bit operating system?  This is necessary for the execution of 32-bit legacy systems that do not work on 64 bit computers.  Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Question about Virtual Machine learning repositories

  Hello everyone,
  
  I am interested in learning repositories OBIEE. Anyone know a virtual machine to learn repositories, I learn of dashboards and reports with Oracle Business Intelligence 11 g (11 g OBIEE) image EE virtual v107. Where could I research training on the repositories?
  
  Kind regards
  
  Carlota Viña Sirgo

  Check this box

  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/bi/bi11115/biadmin11g_02/biadmin11g.htm

  Mark as correct if it is useful

  Thank you.

• Questions of virtual switch VMware ESX 4.0

  I have two vmnic that I use for the service console, I have a current value and the other on the eve.  On the collection of NETWORK Adapters tab, I settled on 'Route based on the original virtual port code' load balancing.

  I have six vmnic used for a network of Virtual Machine, I have all of them the value active.  On the collection of NETWORK Adapters tab I I settled on "Route based on ip hash" load balancing.

  I have two vmnic used for a VMkernel network, I have all of them the value active.  On the collection of NETWORK Adapters tab I I settled on "Route based on ip hash" load balancing.

  I have the service console cables dating back to a Cisco Catalyst 3560 G, I don't have something special with these ports installation.

  I have the cables of the VM network dating back to a Cisco Catalyst 3560 G, I'm recommendations on this article: http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1004048

  I configured 3 groups of channels on the Cisco for each ESX Server (with 6 ports each in each group). What should I do for the configuration of load balancing. In the best practices guide, it shows src-dst-ip. CBC - mac is set to by default etherchannel. If I turn it on to src-dst-ip I have to configure any IP address on the Cisco as the dst - ip or etherchannel takes care of that. What is the best practice for blaance of etherchannel load config?

  I have the VMkernel network goes to the two HP ProCurve 2910al switch.  I would like to divide one of each vmnic between two switches.  Not configure anything at the level of the switch for this?

  I would be grateful the help, thanks again.

  Although each ESX Server will require its own port-channel group independently. So you will have at least the same number of channel groups of port you have esx servers.

  There isn't any problem with not not using circuits.  If you are ending in expansion and maybe a different subnet for your virtual machine to access the creation, then channels will be required to spend more than one vlan to the port-channel group.

  Hope that helps!

  LB

• Question about virtual private networks on 5510

  Hello

  I have a client who is migrating to a Cisco VPN 3000 Concentrator to an ASA 5510 for VPN connections.

  All users connect to a group name currently on the 3000, which has a space in it.  On the ASA when I'm doing this am the ASA accepts only a group without spaces in there name.  Is there a solution that will allow us to use spaces in the name of the Group on the SAA?

  Can I get some advice on why it is not possible to have a space in the name of the Group?  Why Cisco have removed this feature?

  Thank you

  Rob

  Rob

  have you tried to put the name in double quotes?

  i.e.

  dial type tunnel-group "my group".

  Herbert

• Need help with these questions of virtual machine?

  HI GUYS I NEED SOME HELP WITH THIS MATCH THE FOLLOWING

  EVERYTHING IS POSSIBLE! POST RESPONSES FROM RITE?

  Thank you

  

  Answers are

  A

  D

  B

  F

  Post edited by: Vikas

• VCS Virtual X 8 / Root access

  Hello world

  Just a quick question.

  Since the last update of x7.2 to x8.1, virtual VCS in a cluster is not accessible with root login.

  The strange thing is that a fast track (device), within the same infrastructure is accessible via the root.

  It does even more on the vmware console.

  Any suspicion or have you seen this problem yet?

  Bravo and thank you for your answers,

  See you soon,.

  Jul

  I can't really interpret your last message.

  You said 'connections series' where do you use it on a virtual serial ports of vcs - c?

  Do you have pwrec command to run and reset the password?

  Please see the guide to the administrator for more entries!

  The needs of VCS be restarted just to re - define the password password through pwrec, please follow the Administrator's guide.

  pwrec should be done via the virtual console in ESXi.

  (guess a virtual serial port might also work, but I've never tried and also why make it more complicated).

  Try something simple, like 8 characters containing A - X characters and 0-9 to rule out the possibility of keyboard problems.

  BTW, if you have the key to the strengthening of security, root access is disabled.

  Please remember useful frequency responses and identify useful or correct answers.

• License VCS\VCSE of virtual machine hardware migration.

  Hi all

  I want to migrate my hardware to virtual VCS\VCSE.

  Both servers are covered by the active maintenance contract.

  How licenses work in this case? What is the procedure of transfer?

  Any cost?

  Thank you.

  Hello

  About Cisco VCS, you want to migrate virtual machine hardware, you will need to purchase a new license to make the transfer. These are the partnumbers you need:

  R-VMVCS-C-M-K9

  HW migration to E - Delivery Virtual VCS only controls

  R-VMVCS-E-M-K9

  HW migration to E - Delivery Virtual VCS Highway only

  Please contact your Cisco representative for more information.

  After purchasing the license, the license of the VM device rehost will be made by a specific Cisco team, not the team of global license, it is a process different rehost. You will need to send your request to [email protected] / * /, this team will provide instructions to rehost your VCS license correctly.

  I hope this helps.

  Concerning

  Paulo Souza

  Please note the answers and mark it as "answered" as appropriate.