Questions regarding the installation of key code

Similar Questions

• Two questions regarding the installation of Windows 2003 on UCS - C C220 M3

  Hi, I'm trying to do the same procedure as the video below to install a Windows 2003 server in UCS - C 220 M3 with UCSC 2008 M - 8i SAS RAID. This server is managed by the Manager of the UCS 2.2(3g)

  https://supportforums.Cisco.com/video/11927946/how-install-Windows-2003-...

  But the video quality is very bad.

  Can someone help me with 02 questions on this procedure?

  (01) this software has been used to simulate the floppy?
  (02) the image (.img) file that she used was extracted from the UCS DVD ISO Drivers or

  I can't find a direct .img file in the downloads of Cisco?

  Thanks in advance

  My best regards,

  André Lomonaco

  André,

  I think she just used any emulator floppy and .img file, I didn't have a change to watch the entire video, so I don't know what a .img can be useful for...

  Note that Windows 2003 is not supported on this server with this firmware, so you won't find the proper drivers everywhere in cisco.com and also Microsoft's support in his favor on July 14 this year so unless there is a laboratory where unexpected behaviors can be granted, I would not install on C220-M3.

  -Kenny

• Satellite Pro C650: Questions regarding the installation of recovery disk

  Hello

  can someone give me some help please?
  I will have to purchase and install a recovery for my C650 Pro Sat disc.
  When I get it I just plug and play. I also lost windows 7 which was preinstalled, or I can also to buy a new copy of windows 7 and install it too?

  It will then just go back to how it was when we brought.
  Or should I do something else after the recovery disk is installed.

  Thank you
  Tina

  Hi Tina

  You must boot from the recovery disk to put the laptop in the same State as on the first day of purchase.

  The Toshiba Recovery disk format the whole HARD drive and automatically installs Windows 7, Toshiba tools and utilities, drivers, therefore, boot from that disk and you will need to follow the instructions on the screen.

  Welcome them

• Windows 0 x 643 error code... regarding the installation of Microsoft Windows Update

  Get rror Code 0 x 643... regarding the installation of Microsoft Windows Update ===>>> update of security for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2833941).  Have tried to install several times with the same result.  Please NOTE... that every time I go to Windows Update (& execution 'check available updates') than post results this update (security for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2833941)) however indicates that the update is already downloaded on my machine & requires ONLY being installed.  (personally, it is my belief that there could be a problem with the download... what causes the installation to fail... However NO way to re - download is available?  I tried to delete my temporary Internet files & Cache + ran disk cleanup... niether have removed the download of my machine.  Also checked 'Add Remove Programs'... just to see if it was listed there... and it wasn't!  So certainly, the update is NOT installed, I can NOT delete the download that is perhaps corrupt... and preventing me to replace it with a NEW copy.)   ANYONE GOT SUGGESTIONS?   Help, please!  All other updates are installed on the machine... other than this one, & I'm off clues as to what to try next.   Thank you!

  information system: Microsoft Windows XP

  Media Center Edition

  Version 2002

  Service Pack 3 (w / all available updates installed) EXCEPT this one!

  HP Pavilion Notebook dv6120us

  Intel Core 2 CPU

  T7200 @ 2.00GHz

  2.00 GHz, 1.99 GB of Ram

  Internet Explorer Version: 8.0.6001.18702

  Build: 86001

  Uninstall the .NET Framework 1.1. Then download the .NET Framework Cleanup Tool
  In the drop-down list box, select 1.1 and clean.
  Reinstall .NET Framework 1.1
  Download and install. NET Framework 1.1 Service Pack 1
  Visit Windows Update or Microsoft Update and let it install the rest of the 1.1 updates, including KB2833941.

  Check if it is installed and report.

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Yes, another question regarding the freezing of Safari - EtreCheck report included

  Yes, another question regarding the freezing of Safari.

  From a little over a month (I think), Safari started freezing regularly whenever I want to open new tabs or switch between tabs. I found myself to leave the program several times per day / hour. I can't identify any specific common cause (other than my MacBook being old) or any new software or updates that might have initiated the question. At first I thought he might have many tabs, I tried to open, but recently it happens even with only a few tabs open.

  I worked through the steps I found in this forum and others: empty the cache, start in safe mode, etc nothing works.

  Based on the previous suggestions, I have downloaded and run EntreReport which I included below. The note and maybe just a distraction, but EntreReport has crashed three times tonight, before he was able to produce the sub report. I ran the report after restarting my system with no other programs running.

  Suggestions are welcome at this stage because I want to start using Chrome or Firefox because I like the transfer procedure between my devices.

  Thank you in advance.

  Ben

  -----------

  EtreCheck version: 2.9.11 (264)

  Report generated 2016-04-28 22:48:58

  Download EtreCheck from https://etrecheck.com

  Time 05:45

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click on the link [check files] help with unknown files.

  Problem: Apps are broken

  Description:

  Safari freeze when opening new tabs / switching between the tabs.

  Hardware Information: ⓘ

  MacBook Pro (15-inch, mid 2009)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro5, 3

  1 2.66 GHz Intel Core 2 Duo CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = battery check - Cycle count = 389

  Video information: ⓘ

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1440 x 900

  NVIDIA GeForce 9600M GT - VRAM: 256 MB

  Software: ⓘ

  OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

  Disc information: ⓘ

  FUJITSU MJA2320BH FFS G1 disk0: (320,07 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 319,21 go-go (54,93 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  HL-DT-ST DVD - RW GS23N)

  USB information: ⓘ

  Built-in ISight from Apple Inc..

  Card reader Apple

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  ~/Library/LaunchAgents/com. GoodShop.updater.plist

  ~/Library/application support/GoodShop/updater

  A unknown file found. [Check files]

  Kernel extensions: ⓘ

  / Library/Application Support/Symantec/virus

  [no charge] com.symantec.kext.SymAPComm (11.1.2f17 - 2015-05-23) [Support]

  / Library/Extensions

  [no charge] expressvpn.tap (20150118 - 2016-04-12) [Support]

  [loading] expressvpn.tun (20150118 - 2016-04-12) [Support]

  / System/Library/Extensions

  [no charge] com.DYMO.usbprinterclassdriver.kext (1.1 - SDK 10.9-2016-04-12) [Support]

  com.Silex.driver.sxuptp [no charge] (1.5.1 - 2016-04-12) [Support]

  com.symantec.kext.internetSecurity [no charge] (1.3.2 - 2016-04-12) [Support]

  com.Symantec.kext.IPS [no charge] (3.2 - 2016-04-12) [Support]

  Startup items: ⓘ

  CMA: path: / Library/StartupItems/cma

  RosettaStoneLtdDaemon: Path: / Library/StartupItems/RosettaStoneLtdDaemon

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 165 tasks Apple

  [operation] 65 tasks Apple

  Launch system demons: ⓘ

  [loaded] 45 tasks Apple

  [loading] 161 tasks Apple

  [operation] 83 tasks Apple

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-04-28) [Support]

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-10-31) [Support]

  [operation] com.epson.Epson_Low_Ink_Reminder.launcher.plist (2015-01-19) [Support]

  [loading] com.epson.esua.launcher.plist (2015-06-29) [Support]

  [operation] com.epson.eventmanager.agent.plist (2014-09-21) [Support]

  [loading] com.google.keystone.agent.plist (2016-03-01) [Support]

  [operation] com.mcafee.menulet.plist (2016-03-23) [Support]

  [operation] com.mcafee.reporter.plist (2016-03-23) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2013-11-14) [Support]

  [operation] com.symantec.uiagent.application.plist (2010-11-16) [Support]

  [operation] com.trusteer.rapport.rapportd.plist (2016-03-19) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2015-10-31) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-10-31) [Support]

  [loading] com.adobe.fpsaud.plist (2016-04-15) [Support]

  com.DYMO.pnpd.plist [no charge] (2014-10-16) [Support]

  [loading] com.expressvpn.tap.plist (2016-01-27) [Support]

  [loading] com.expressvpn.tun.plist (2016-01-27) [Support]

  [loading] com.google.keystone.daemon.plist (2016-03-01) [Support]

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-04-18) [Support]

  [operation] com.mcafee.cspd.plist (2015-05-08) [Support]

  com.mcafee.ssm.ScanFactory.plist [no charge] (2016-03-16) [Support]

  com.mcafee.ssm.ScanManager.plist [no charge] (2016-03-16) [Support]

  [operation] com.mcafee.virusscan.fmpd.plist (2016-03-22) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2013-11-14) [Support]

  [loading] com.symantec.MissedTasks.plist (2009-11-10) [Support]

  [loading] com.symantec.Sched501 - 1.plist (2014-08-27) [Support]

  [loading] com.symantec.Sched501 - 4.plist (2015-01-08) [Support]

  [loading] com.symantec.Sched501 - 5.plist (2015-01-08) [Support]

  [loading] com.symantec.avscandaemon.plist (2009-10-10) [Support]

  [operation] com.symantec.diskMountNotify.plist (2009-09-14) [Support]

  [loading] com.symantec.navapd.plist (2009-09-14) [Support]

  [loading] com.symantec.navapdaemonsl.plist (2009-11-14) [Support]

  [operation] com.symantec.sharedsettings.plist (2009-07-22) [Support]

  [operation] com.symantec.symSchedDaemon.plist (2009-11-10) [Support]

  [operation] com.symantec.symdaemon.plist (2009-03-27) [Support]

  [operation] com.trusteer.rooks.rooksd.plist (2016-03-19) [Support]

  User launch officers: ⓘ

  com [running]. GoodShop.updater.plist (2013-09-24) [Support]

  [loading] com.adobe.AAM.Updater - 1.0.plist (2015-10-25) [Support]

  [failure] com.facebook.videochat. [entrenched passage] .plist (2014-08-09) [Support]

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-04-25) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Application of Google Reader (Google Drive.app/Applications /)

  Dropbox application (/ Applications/Dropbox.app)

  ExpressVPN application (/ Applications/ExpressVPN.app)

  CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 4.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Other applications: ⓘ

  [ongoing] com.DYMO.pnpd

  [ongoing] com.getdropbox.dropbox.83552

  [ongoing] com.google.GoogleDrive.81632

  [ongoing] com.macpaw.CleanMyMac3.Menu.80672

  [ongoing] com.mcafee.ssm.ScanManager

  [ongoing] com.mcafee.virusscan.ssm.ScanFactory

  [loading] 420 tasks Apple

  [operation] 193 tasks Apple

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]

  Default browser: 601 - SDK 10.11 (2016-04-18)

  Flip4Mac WMV Plugin: 2.4.4.2 (2012-12-25) [Support]

  DYMO Safari Addin: Unknown - SDK 10.9 (2014-10-26) [Support]

  AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]

  Silverlight: 5.1.30514.0 - SDK 10.6 (2015-09-16) [Support]

  QuickTime Plugin: 7.7.3 (2016-04-12)

  Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  iPhotoPhotocast: 7.0 (2010-11-15)

  AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  SharePointBrowserPlugin: 14.3.0 - SDK 10.6 (2013-02-09) [Support]

  SiteAdvisor: 2.0 - 10.1 SDK (2015-03-30) [Support]

  JavaAppletPlugin: Java 8 updated 77 03 (2016-04-18) check the version of build

  Safari extensions: ⓘ

  AdBlock - BetaFish, Inc. - https://getadblock.com (2016-03-30)

  Add to wishlist Amazon - Amazon.com - http://www.amazon.com/wishlist?ref=cm_wl_saf_ext (2011-07-09)

  GoodShop - GOODSEARCH LLC - http://www.GoodSearch.com (2013-09-24)

  SiteAdvisor - McAfee - http://www.siteadvisor.com (2015-09-28)

  PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2015-07-03)

  3rd party preference panes: ⓘ

  Flash Player (2016-04-15) [Support]

  Flip4Mac WMV (2012-05-15) [Support]

  Growl (2015-09-16) [Support]

  Java (2016-04-18) [Support]

  Norton\nQuickMenu (2010-11-16) [Support]

  Trusteer Endpoint Protection (2016-04-18) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  5% WindowServer

  1% kernel_task

  0% fontd

  0% SymDaemon

  Top of page process of memory: ⓘ

  445 MB kernel_task

  Mdworker (18) 430 MB

  164 MB Google Reader

  Dropbox 123 MB

  VShieldScanner (4) 66 MB

  Virtual memory information: ⓘ

  106 MB free RAM

  4.15 GB used RAM (770 MB cache)

  6 MB used Swap

  Diagnostic information: ⓘ

  April 28, 2016, 22:42:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-224212_[redacted].crash

  com.etresoft.EtreCheck - /Applications/EtreCheck.app/Contents/MacOS/EtreCheck

  28 April 2016, 22:21:42 self-test - spent

  April 28, 2016, 19:49:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194912_[redacted].crash

  April 28, 2016, 19:47:10 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194710_[redacted].crash

  April 28, 2016, 19:38:58 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-193858_[redacted].crash

  April 28, 2016, 19:04:58 ~/Library/Logs/DiagnosticReports/rapportd_2016-04-28-190458_[redacted].crash

  /Library/rapport/*/rapportd.app/Contents/MacOS/rapportd

  April 28, 2016, 06:06:59 /Library/Logs/DiagnosticReports/Safari_2016-04-28-060659_[redacted].hang

  /Applications/Safari.app/Contents/MacOS/Safari

  April 28, 2016, 12:48:04 AM /Library/Logs/DiagnosticReports/SubmitDiagInfo_2016-04-28-004804_[redacted].cpu _resource.diag [details]

  / System/Library/CoreServices/SubmitDiagInfo

  April 27, 2016, 22:01:10 /Library/Logs/DiagnosticReports/Safari_2016-04-27-220110_[redacted].hang

  April 27, 2016, 21:57:37 /Library/Logs/DiagnosticReports/Safari_2016-04-27-215737_[redacted].hang

  April 27, 2016, 19:05:50 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-27-190550_[redacted].crash

  April 27, 2016, 06:57:28 ~/Library/Logs/DiagnosticReports/Airmail 2_2016-04-27-065728_ .crash [deleted]

  / Applications/Airmail 2.app/Contents/MacOS/Airmail 2

  26 April 2016, 19:48:11 /Library/Logs/DiagnosticReports/Safari_2016-04-26-194811_[redacted].hang

  Remove all apps viruses you have

  Symantec, McAfee, Norton...

  CleanMyMac3

• Windows 8 upgrade retains fault make sure all files required for installation are available, and restart the installation. Error code: 0x8007025D

  Hello

  Like so many others, I am fighting to get 8 upgraded windows. I have tried all the methods mentioned upgrade

  on the forums without success. I have greated iso dvd, tried to use the USB and the installation of office.

  Error: Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. [Error code: 0x8007025D]

  The error logs:

  Setupact.txt

  2012-11-04 01:02:27, MoveOldOSFiles IBS Info [0x0600a6]: got through [C:\Windows\] to [C:\Windows.old\Windows\]
  2012-11-04 01:02:27, info [0x06412c] IBSLIB SetCheckpoint: Checkpoint ("WinPEArchiveOldWindowsFoldersDoneCheckpoint") current...
  2012-11-04 01:02:27, info [0x06412e] IBSLIB SetCheckpoint: Checkpoint 'WinPEArchiveOldWindowsFoldersDoneCheckpoint' have been correctly set up.
  2012-11-04 01:02:27, info [0x06412c] IBSLIB SetCheckpoint: Checkpoint ("WinPEImageApplyReadyCheckpoint") current...
  2012-11-04 01:02:28, info [0x06412e] IBSLIB SetCheckpoint: Checkpoint 'WinPEImageApplyReadyCheckpoint' have been correctly set up.
  2012-11-04 01:02:28, info [0x06009e] IBS DeployWIMImage:Calling IDepWIMImageResolved::Apply...
  2012-11-04 01:02:28, info [0x0606cc] IBS calling WIMApplyImage (flags = 0 x 180)...
  2012-11-04 01:08:36, ApplyWIMCallback IBS Info [0x0600ae]: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:36, ApplyWIMCallback IBS Info [0x0600ae]: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:37, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the file [C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys] RULE is [605]
  2012-11-04 01:08:41, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:41, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:41, IBS error [0x0600af] ApplyWIMCallback: error application C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys. RULE [605] [gle = 0x0000025d]
  2012-11-04 01:08:41, error [0x0606cc] IBS WIMApplyImage failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0x0600a1] IBS DeployImage:Image request failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0 x 060082] IBS Callback_ImageTransfer: unable to set the OS image. HR = 0x8007025d [gle = 0x0000025d]
  2012-11-04 01:08:42, PublishCriticalError IBSLIB Info: publish error message critical [Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. [Error code: 0x8007025D]
  2012-11-04 01:08:42, info [0x0a013d] UI accept Cancel. Leaving the Page's progress.
  2012-11-04 01:08:42, info UI entering Page Cancel.

  Setuperr.txt

  2012-11-04 01:08:41, IBS error [0x0600af] ApplyWIMCallback: error application C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys. RULE [605] [gle = 0x0000025d]
  2012-11-04 01:08:41, error [0x0606cc] IBS WIMApplyImage failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0x0600a1] IBS DeployImage:Image request failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0 x 060082] IBS Callback_ImageTransfer: unable to set the OS image. HR = 0x8007025d [gle = 0x0000025d]

  Any help will be greatly appreciated.

  Thank you for all the answers. Finally managed to get installed it. Download 4 times. Whenever he stopped at different percentages, so I expected the download is corrupt. Finally in the format of my other readers, installed windows 7 on it and then downloaded windows 8. Finally, it worked. Had to be something with my player.

  Thanks again.

• Got a legal question about the installation of Adobe Photoshop Elements.  How to get help from Adobe using a chat session?

  Got a legal question about the installation of Adobe Photoshop Elements.  How to get help from Adobe using a chat session?

  AdobeTomFaith

  If your program is Photoshop Elements, then you have posted in the wrong forum. Some how your son got posted in the Forum Adobe Premiere elements (video editing). Please re-post your thread in the Adobe Photoshop elements Forum.

  Photoshop Elements

  Wherever your son is, please include Adobe Photoshop Elements version and operating system and the description of the installation problem (error messages, stage of failure, etc.)

  Support Adobe seems to be limited to Adobe cat and is classically limited to the current version which is 13. Then, you the best avenue to success is likely to be through the Adobe Photoshop elements Forum. But that shouldn't stop you trying to determine what kind of support you can get from Adobe cat on your question.

  I would offer this link that is specific for Adobe Chat download and installation

  Contact the customer service (this is not the same destination as shown in a previous post in your thread)

  This link is specifically designed for

  Photoshop Elements

  Download, installation, setting up

  Download and installation

  Panel discussion

  (18:00 - Friday 7 pm Sunday)

  Thank you.

  RTA

• Setup could not access a critical file. Please retry the installation. Error code: 49

  Despite several attempts I still got the message:

  Setup could not access a critical file. Please retry the installation. Error code: 49

  Thanks for your help

  If os win, right click on the Setup file and click "Run as Administrator".

• Im trying to download the creative cloud on my Mac but its gives me the error "Installation on case-sensitive volumes is not supported. Please choose a different volume for the installation. (Error code: 22) "can you help me with this please?

  Im trying to download the creative cloud on my Mac but its gives me the error "Installation on case-sensitive volumes is not supported. Please choose a different volume for the installation. (Error code: 22) "can you help me with this please?

  Try error "Unsupported of disks case-sensitive" or similar install error | Mac OS

• A few questions regarding the audit

  Hi all
  
  
  
  Greetings. I have a few questions regarding the audit.
  
  
  1. how to enable auditing for create table and truncate table by a user?
  
  

  SQL> audit table by schema_name;
  
  Audit succeeded.

  Fact the knowledge of the above: http://psoug.org/reference/auditing.html
  
  This succeeded. But when I actually created a table, it does not reflect in the dba_audit_trail;
  
  
  Do I have to use the number of action by and then combine it with another table to populate the create table/truncate table?
  
  
  2. How can I check what all auditing has been activated so far?
  
  
  Please suggest me. I am unable to follow the audit to create and truncate.
  
  
  Concerning
  KK

  In the above article that I mentioned earlier it said check the dba_audit_trail table.

  COLUMN username FORMAT A10
  COLUMN owner    FORMAT A10
  COLUMN obj_name FORMAT A10
  COLUMN extended_timestamp FORMAT A35
  
  SELECT username,
         extended_timestamp,
         owner,
         obj_name,
         action_name
  FROM   dba_audit_trail
  WHERE  owner = 'AUDIT_TEST'
  ORDER BY timestamp;
  
  USERNAME   EXTENDED_TIMESTAMP                  OWNER      OBJ_NAME   ACTION_NAME
  ---------- ----------------------------------- ---------- ---------- ----------------------------
  AUDIT_TEST 16-FEB-2006 14:16:55.435000 +00:00  AUDIT_TEST TEST_TAB   CREATE TABLE
  AUDIT_TEST 16-FEB-2006 14:16:55.514000 +00:00  AUDIT_TEST TEST_TAB   INSERT
  AUDIT_TEST 16-FEB-2006 14:16:55.545000 +00:00  AUDIT_TEST TEST_TAB   UPDATE
  AUDIT_TEST 16-FEB-2006 14:16:55.592000 +00:00  AUDIT_TEST TEST_TAB   SELECT
  AUDIT_TEST 16-FEB-2006 14:16:55.670000 +00:00  AUDIT_TEST TEST_TAB   DELETE
  AUDIT_TEST 16-FEB-2006 14:17:00.045000 +00:00  AUDIT_TEST TEST_TAB   DROP TABLE
  
  6 rows selected.
  
  SQL>
  

  Have you reviewed this table?

  Alternatively, you can consult the table of dba_stmt_audit_opts.
  DBA_STMT_AUDIT_OPTS

  Published by: Kerri_Robberts on July 15, 2011 15:11

• Question about the Installation of Windows XP on Portege 3500 home

  I have a second hand Portege 3500 with WXP tablet 2005 Server Pack 2 market version, but without the original disks. However, recently had a virus that did something to Prime the area on the hard disk. I have removed the virus but now get unexpected core dumps memory and system restarts when you try to connect to the internet.

  Question: can I go down a level and safely install ordinary WXP software to work around the problem or the acquisition of new version of WXP Tablet and reinstall the software to circumvent the problem of core dump?

  Installation of an operating system on this laptop, it's the hardest thing I have ever tried to do. Once start you, you will notice that there is no device boot attached to this pc. To install windows, yourself, the only options are to buy the cdrom drive for this laptop toshiba external or install via a network.

  The toshiba cdrom drive is now quite obsolete, more expensive and the external device only that the laptop starts from (I tried with the other external cdroms, DVDs, disks usb keys and hard). It seems extremely difficult to boot from lan unless you already manage it infrastructure of the company. It is possible in theory, but after 3 weeks I still hadn't thought about her.

  My solution at the end of the day was to send it to my local toshiba support center and ask them to re - install for me (he happened to have one in stock toshiba cdrom burners). I got the installation cd, so I guess you will need get these images from toshiba as well (or buy another os).

  Good luck!

• NI-VISA DURATION 5.4.1 questions about the installer.

  All,

  I have a question that I hope you can help me with. I have a user that I am trying to run an installer for Labview 2012 with Runtime OR 5.4.1. When I run the installer with the driver NI-VISA of Runtime 5.4.1 checked, I get an error that says this:

  "Unsupported version of NI-detected VISA" a version of NI-VISA, which is not supported on this operating system were found. You must cancel this installation and uninstall the old version before continuing. Visit ni.com/frinfo and enter the Info Code CleanVista for more information.

  I went, but I don't see a problem with the problem I have. All other computers that have installed with VISA Installer installed very well without any problems. When I do not select the VISA duration, the installer works correctly. I need this part of Setup so that I can communicate with the COM port on a laptop that is Windows 7 32-bit system. My PC is also Win7 32 bit.

  I thought that to download the VISA_540runtime.exe as a storage facility, but it indicates that it is an unsupported Win32 application?

  I created a log file, but I don't know what I'm looking for. Can you help or shrink the cause?

  Solved my problem. I didn't know that Labview had already been installed, and a previous version of VISA was also installed. I removed it and the version of Labview and re-directed the installer without a hiccup.

• 0x8004FE2C - question to the windows activation key

  Hello

  I have error

  Please let know us how we can solve this problem.

  Thank you.

  Below you will find the details on the system.

  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation code: 0

  Validation caching Code online: n/a, hr = 0xc004f012

  Windows product key: *-* - 7TM6M - TK7G2-KJCV4

  The Windows Product Key hash: jgLVn4dddzkRDJXmBqIAOzkETa0 =

  Windows product ID: 00371-OEM-9326314-78090

  Windows product ID type: 8

  Windows license type: COA SLP

  The Windows OS version: 6.1.7601.2.00010100.1.0.048

  ID: {05618D2D-81DC-41FA-BC57-D12CD886A7C6} (3)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows 7 Professional

  Architecture: 0 x 00000009

  Build lab: 7601.win7sp1_gdr.130828 - 1532

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  OGAExec.exe signed by: n/a, hr = 0 x 80070002

  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->

  Office status: 100 authentic

  Microsoft Office Standard Edition 2003 - 100 authentic

  OGA Version: N/a, 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->

  Office details: {05618D2D-81DC-41FA-BC57-D12CD886A7C6}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-KJCV400371-OEM-9326314-780908S-1-5-21-3664050279-3824183996-724141515Hewlett-PackardHP EliteDesk 705 G1 SFFHewlett-PackardL06 v02.1720141211000000.000000 + 0007C133A07018400F60407,0409Romance Standard Time(GMT+01:00)13HPQOEMSLIC PCB100100Microsoft Office Standard Edition 200311B94028611BF1D06g2u7I/EeO5gtmI5X2Zy5MismkM0 = 70141-643-4507543-5755314

  Content Spsys.log: 0 x 80070002

  License data-->

  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition

  Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP

  Activation ID: da22eadd-46dc-4056-a287-f5041c852470

  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f

  Extended PID: 00371-00186-263-178090-02-1031-7601.0000-2372015

  Installation ID: 013603004956603436238542102751618104265946479032789741

  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338

  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339

  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341

  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340

  Partial product key: KJCV4

  License status: initial grace period

  Time remaining: 43200 minute (30 day (s))

  Remaining Windows rearm count: 0

  Time to trust: 25.08.2015 15:39:09

  Windows Activation Technologies-->

  HrOffline: 0x00000000

  HrOnline: 0x00000000

  Beyond: 0 x 0000000000000000

  Event timestamp: 8:24:2015 11:48

  ActiveX: Registered, Version: 7.1.7600.16395

  The admin service: recorded, Version: 7.1.7600.16395

  Output beyond bitmask:

  --> HWID data

  Current Hash HWID: MAAAAAEAAQABAAEAAQADAAAAAQABAAEA6GGOyiT + hNtkLhAxiqmKmzoBDddW4/AB

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes

  Windows marker version: 0 x 20001

  OEMID and OEMTableID consistent: Yes

  BIOS information:

  ACPI Table name OEMID value OEMTableID value

  HPQOEM APIC-SLIC PCBS

  SLIC FACP HPQOEM PCB

  HPQOEM HPET SLIC PCBS

  MCFG HPQOEM SLIC PCBS

  FPDT HPQOEM SLIC PCBS

  FIDT HPQOEM SLIC PCBS

  SSDT COMPAQ WMI

  SLIC SLIC PCB HPQOEM

  UEFI HPQOEM SLIC PCBS

  IVRS AMD BANTRY

  SSDT COMPAQ WMI

  SSDT COMPAQ WMI

  ARCT AMD BANTRY

  SSDT COMPAQ WMI

  SSDT COMPAQ WMI

  Is there a COA sticker on the case - or a sticker to Windows 8?

  Sticker even like all the other 705 Elitedesk have been ordered.

  Yes - but is it a Windows 7 sticker, or a sticker to Windows 8?

  Assuming it's a sticker of WIndows 7, all you have to do is to use activation by phone-

  activation by telephone (call of the operator)
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• Question about the installation of Windows 7

  Regarding Windows 7 Home Premium... Say that I buy the commercial version that comes with "the" 32-bit and 64-bit versions. I can install the 32-bit version on my current 32-bit PC and then 'later' to install the 64-bit on a 64-bit newly purchased PC version? I know I have to disable the 32-bit version out of the old PC.

  As long as you remove or disable the 32-bit version, yes you can install 64-bit on your new PC.  Note: A "Full" version does not require that an earlier version of Windows (XP, Vista or Windows 7). If your PC has Windows installed 8 look in "Downgrade rights" before making your purchase.

  Anyway, given that the key was already used once only once, you'll need to enable 64-bit by phone.

  =========================================================

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com