Questions regarding the process of implementing container/control. How "parent of filling" and how to get the actual size of the control?
I'm writing some UI component custom waterfalls. I went if the document several times and still have two questions:
1. is it possible to adjust the width of the control to fill the container parent without specifying the number hardcoded in pixel? I see many example of code uses '768' as hardcoded width.
2. I understand that the 'preferred size' could be ignored in some cases. Is it possible that I can get the actual size of the control on the screen programmatically?
3. is there any signal was issued when a control container/finish covering all of its child nodes? How do I know what size of a control is finally decided?
Thank you
mdodd wrote:
(1) you can use (QML)
horizontalAlignment: HorizontalAlignment.Fillor (C++)
myControl->setHorizontalAlignment(HorizontalAlignment::Fill);This will cause control occupy the entire width available to its parent. However, keep in mind you may have to use this property on all containers of parent to the node root to get the width of the full screen.
As far as I KNOW simon_hain is located on the other two issues.
((2) & (3) I just dug around and you find LayoutUpdateHandler would do the job:
https://developer.BlackBerry.com/Cascades/reference/bb__cascades__layoutupdatehandler.html
mdodd answer on question 1) is correct.
I can't believe they made a separate category for such a common task. Framework of stunts have had some serious consistency problems, that's what I feel.
Thanks to all who have contributed to
Tags: BlackBerry Developers
Similar Questions
-
Yes, another question regarding the freezing of Safari - EtreCheck report included
Yes, another question regarding the freezing of Safari.
From a little over a month (I think), Safari started freezing regularly whenever I want to open new tabs or switch between tabs. I found myself to leave the program several times per day / hour. I can't identify any specific common cause (other than my MacBook being old) or any new software or updates that might have initiated the question. At first I thought he might have many tabs, I tried to open, but recently it happens even with only a few tabs open.
I worked through the steps I found in this forum and others: empty the cache, start in safe mode, etc nothing works.
Based on the previous suggestions, I have downloaded and run EntreReport which I included below. The note and maybe just a distraction, but EntreReport has crashed three times tonight, before he was able to produce the sub report. I ran the report after restarting my system with no other programs running.
Suggestions are welcome at this stage because I want to start using Chrome or Firefox because I like the transfer procedure between my devices.
Thank you in advance.
Ben
-----------
EtreCheck version: 2.9.11 (264)
Report generated 2016-04-28 22:48:58
Download EtreCheck from https://etrecheck.com
Time 05:45
Performance: Below average
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Click on the link [check files] help with unknown files.
Problem: Apps are broken
Description:
Safari freeze when opening new tabs / switching between the tabs.
MacBook Pro (15-inch, mid 2009)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro5, 3
1 2.66 GHz Intel Core 2 Duo CPU: 2 strands
4 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 2 GB DDR3 1067 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1067 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = battery check - Cycle count = 389
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1440 x 900
NVIDIA GeForce 9600M GT - VRAM: 256 MB
OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour
FUJITSU MJA2320BH FFS G1 disk0: (320,07 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Macintosh HD (disk0s2) /: 319,21 go-go (54,93 free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
HL-DT-ST DVD - RW GS23N)
Built-in ISight from Apple Inc..
Card reader Apple
Apple Inc. BRCM2046 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Mac App Store and identified developers
~/Library/LaunchAgents/com. GoodShop.updater.plist
~/Library/application support/GoodShop/updater
A unknown file found. [Check files]
/ Library/Application Support/Symantec/virus
[no charge] com.symantec.kext.SymAPComm (11.1.2f17 - 2015-05-23) [Support]
/ Library/Extensions
[no charge] expressvpn.tap (20150118 - 2016-04-12) [Support]
[loading] expressvpn.tun (20150118 - 2016-04-12) [Support]
/ System/Library/Extensions
[no charge] com.DYMO.usbprinterclassdriver.kext (1.1 - SDK 10.9-2016-04-12) [Support]
com.Silex.driver.sxuptp [no charge] (1.5.1 - 2016-04-12) [Support]
com.symantec.kext.internetSecurity [no charge] (1.3.2 - 2016-04-12) [Support]
com.Symantec.kext.IPS [no charge] (3.2 - 2016-04-12) [Support]
CMA: path: / Library/StartupItems/cma
RosettaStoneLtdDaemon: Path: / Library/StartupItems/RosettaStoneLtdDaemon
Startup items are obsolete in OS X Yosemite
[loaded] 8 tasks Apple
[loading] 165 tasks Apple
[operation] 65 tasks Apple
[loaded] 45 tasks Apple
[loading] 161 tasks Apple
[operation] 83 tasks Apple
[no charge] com.adobe.AAM.Updater - 1.0.plist (2016-04-28) [Support]
[failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-10-31) [Support]
[operation] com.epson.Epson_Low_Ink_Reminder.launcher.plist (2015-01-19) [Support]
[loading] com.epson.esua.launcher.plist (2015-06-29) [Support]
[operation] com.epson.eventmanager.agent.plist (2014-09-21) [Support]
[loading] com.google.keystone.agent.plist (2016-03-01) [Support]
[operation] com.mcafee.menulet.plist (2016-03-23) [Support]
[operation] com.mcafee.reporter.plist (2016-03-23) [Support]
[loading] com.oracle.java.Java - Updater.plist (2013-11-14) [Support]
[operation] com.symantec.uiagent.application.plist (2010-11-16) [Support]
[operation] com.trusteer.rapport.rapportd.plist (2016-03-19) [Support]
[loading] com.adobe.ARMDC.Communicator.plist (2015-10-31) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-10-31) [Support]
[loading] com.adobe.fpsaud.plist (2016-04-15) [Support]
com.DYMO.pnpd.plist [no charge] (2014-10-16) [Support]
[loading] com.expressvpn.tap.plist (2016-01-27) [Support]
[loading] com.expressvpn.tun.plist (2016-01-27) [Support]
[loading] com.google.keystone.daemon.plist (2016-03-01) [Support]
[loading] com.macpaw.CleanMyMac3.Agent.plist (2016-04-18) [Support]
[operation] com.mcafee.cspd.plist (2015-05-08) [Support]
com.mcafee.ssm.ScanFactory.plist [no charge] (2016-03-16) [Support]
com.mcafee.ssm.ScanManager.plist [no charge] (2016-03-16) [Support]
[operation] com.mcafee.virusscan.fmpd.plist (2016-03-22) [Support]
[loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]
[loading] com.oracle.java.Helper - Tool.plist (2013-11-14) [Support]
[loading] com.symantec.MissedTasks.plist (2009-11-10) [Support]
[loading] com.symantec.Sched501 - 1.plist (2014-08-27) [Support]
[loading] com.symantec.Sched501 - 4.plist (2015-01-08) [Support]
[loading] com.symantec.Sched501 - 5.plist (2015-01-08) [Support]
[loading] com.symantec.avscandaemon.plist (2009-10-10) [Support]
[operation] com.symantec.diskMountNotify.plist (2009-09-14) [Support]
[loading] com.symantec.navapd.plist (2009-09-14) [Support]
[loading] com.symantec.navapdaemonsl.plist (2009-11-14) [Support]
[operation] com.symantec.sharedsettings.plist (2009-07-22) [Support]
[operation] com.symantec.symSchedDaemon.plist (2009-11-10) [Support]
[operation] com.symantec.symdaemon.plist (2009-03-27) [Support]
[operation] com.trusteer.rooks.rooksd.plist (2016-03-19) [Support]
com [running]. GoodShop.updater.plist (2013-09-24) [Support]
[loading] com.adobe.AAM.Updater - 1.0.plist (2015-10-25) [Support]
[failure] com.facebook.videochat. [entrenched passage] .plist (2014-08-09) [Support]
[loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-04-25) [Support]
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Application of Google Reader (Google Drive.app/Applications /)
Dropbox application (/ Applications/Dropbox.app)
ExpressVPN application (/ Applications/ExpressVPN.app)
CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 4.app/Contents/MacOS/CleanMyMac 3 Menu.app)
[ongoing] com.DYMO.pnpd
[ongoing] com.getdropbox.dropbox.83552
[ongoing] com.google.GoogleDrive.81632
[ongoing] com.macpaw.CleanMyMac3.Menu.80672
[ongoing] com.mcafee.ssm.ScanManager
[ongoing] com.mcafee.virusscan.ssm.ScanFactory
[loading] 420 tasks Apple
[operation] 193 tasks Apple
o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]
Default browser: 601 - SDK 10.11 (2016-04-18)
Flip4Mac WMV Plugin: 2.4.4.2 (2012-12-25) [Support]
DYMO Safari Addin: Unknown - SDK 10.9 (2014-10-26) [Support]
AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]
FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]
Silverlight: 5.1.30514.0 - SDK 10.6 (2015-09-16) [Support]
QuickTime Plugin: 7.7.3 (2016-04-12)
Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]
googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]
iPhotoPhotocast: 7.0 (2010-11-15)
AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]
SharePointBrowserPlugin: 14.3.0 - SDK 10.6 (2013-02-09) [Support]
SiteAdvisor: 2.0 - 10.1 SDK (2015-03-30) [Support]
JavaAppletPlugin: Java 8 updated 77 03 (2016-04-18) check the version of build
AdBlock - BetaFish, Inc. - https://getadblock.com (2016-03-30)
Add to wishlist Amazon - Amazon.com - http://www.amazon.com/wishlist?ref=cm_wl_saf_ext (2011-07-09)
GoodShop - GOODSEARCH LLC - http://www.GoodSearch.com (2013-09-24)
SiteAdvisor - McAfee - http://www.siteadvisor.com (2015-09-28)
PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2015-07-03)
Flash Player (2016-04-15) [Support]
Flip4Mac WMV (2012-05-15) [Support]
Growl (2015-09-16) [Support]
Java (2016-04-18) [Support]
Norton\nQuickMenu (2010-11-16) [Support]
Trusteer Endpoint Protection (2016-04-18) [Support]
Time Machine not configured!
5% WindowServer
1% kernel_task
0% fontd
0% SymDaemon
Top of page process of memory: ⓘ
445 MB kernel_task
Mdworker (18) 430 MB
164 MB Google Reader
Dropbox 123 MB
VShieldScanner (4) 66 MB
106 MB free RAM
4.15 GB used RAM (770 MB cache)
6 MB used Swap
April 28, 2016, 22:42:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-224212_[redacted].crash
com.etresoft.EtreCheck - /Applications/EtreCheck.app/Contents/MacOS/EtreCheck
28 April 2016, 22:21:42 self-test - spent
April 28, 2016, 19:49:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194912_[redacted].crash
April 28, 2016, 19:47:10 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194710_[redacted].crash
April 28, 2016, 19:38:58 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-193858_[redacted].crash
April 28, 2016, 19:04:58 ~/Library/Logs/DiagnosticReports/rapportd_2016-04-28-190458_[redacted].crash
/Library/rapport/*/rapportd.app/Contents/MacOS/rapportd
April 28, 2016, 06:06:59 /Library/Logs/DiagnosticReports/Safari_2016-04-28-060659_[redacted].hang
/Applications/Safari.app/Contents/MacOS/Safari
April 28, 2016, 12:48:04 AM /Library/Logs/DiagnosticReports/SubmitDiagInfo_2016-04-28-004804_[redacted].cpu _resource.diag [details]
/ System/Library/CoreServices/SubmitDiagInfo
April 27, 2016, 22:01:10 /Library/Logs/DiagnosticReports/Safari_2016-04-27-220110_[redacted].hang
April 27, 2016, 21:57:37 /Library/Logs/DiagnosticReports/Safari_2016-04-27-215737_[redacted].hang
April 27, 2016, 19:05:50 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-27-190550_[redacted].crash
April 27, 2016, 06:57:28 ~/Library/Logs/DiagnosticReports/Airmail 2_2016-04-27-065728_ .crash [deleted]
/ Applications/Airmail 2.app/Contents/MacOS/Airmail 2
26 April 2016, 19:48:11 /Library/Logs/DiagnosticReports/Safari_2016-04-26-194811_[redacted].hang
Remove all apps viruses you have
Symantec, McAfee, Norton...
CleanMyMac3
-
A few questions regarding the audit
Hi all
Greetings. I have a few questions regarding the audit.
1. how to enable auditing for create table and truncate table by a user?
Fact the knowledge of the above: http://psoug.org/reference/auditing.htmlSQL> audit table by schema_name; Audit succeeded.
This succeeded. But when I actually created a table, it does not reflect in the dba_audit_trail;
Do I have to use the number of action by and then combine it with another table to populate the create table/truncate table?
2. How can I check what all auditing has been activated so far?
Please suggest me. I am unable to follow the audit to create and truncate.
Concerning
KKIn the above article that I mentioned earlier it said check the dba_audit_trail table.
COLUMN username FORMAT A10 COLUMN owner FORMAT A10 COLUMN obj_name FORMAT A10 COLUMN extended_timestamp FORMAT A35 SELECT username, extended_timestamp, owner, obj_name, action_name FROM dba_audit_trail WHERE owner = 'AUDIT_TEST' ORDER BY timestamp; USERNAME EXTENDED_TIMESTAMP OWNER OBJ_NAME ACTION_NAME ---------- ----------------------------------- ---------- ---------- ---------------------------- AUDIT_TEST 16-FEB-2006 14:16:55.435000 +00:00 AUDIT_TEST TEST_TAB CREATE TABLE AUDIT_TEST 16-FEB-2006 14:16:55.514000 +00:00 AUDIT_TEST TEST_TAB INSERT AUDIT_TEST 16-FEB-2006 14:16:55.545000 +00:00 AUDIT_TEST TEST_TAB UPDATE AUDIT_TEST 16-FEB-2006 14:16:55.592000 +00:00 AUDIT_TEST TEST_TAB SELECT AUDIT_TEST 16-FEB-2006 14:16:55.670000 +00:00 AUDIT_TEST TEST_TAB DELETE AUDIT_TEST 16-FEB-2006 14:17:00.045000 +00:00 AUDIT_TEST TEST_TAB DROP TABLE 6 rows selected. SQL>Have you reviewed this table?
Alternatively, you can consult the table of dba_stmt_audit_opts.
DBA_STMT_AUDIT_OPTSPublished by: Kerri_Robberts on July 15, 2011 15:11
-
The question regarding the positioning (differences between Design view and live view)
I don't know how to perform the same search to see if this has been asked, nor how to properly ask the question... but here goes...
I have a div id "container" which is limited to large 968px. Inside that I want to have 2 columns (one containing nothing else than a background image) next to each other.
I called a left_column and other right_column.
The background image will be in the left column and is high by wide 290px 550px.
I used CSS to define the following:
{#left_column}
background-color: #FFF;
background-image: url (.. / images/waterfall.jpg);
background-repeat: no-repeat;
position: relative;
height: 550px;
Width: 290px;
margin-right: 10px;
float: left;
}
{#right_column}
height: 550px;
Width: 650px;
margin-left: 10px;
padding-left: 12px;
position: relative;
left: 10px;
}
In "design mode" everything seems wonderful. When I go to the live view (and/or browserlab) the text in the right-hand column shows the usable space is only 300px.
If I change the width of the right_column to 'auto' can live view (and/or browserlab) everything seems all I want, but in the view design right_column width is closer to 900px and goes the WAY out of the container (which makes it very difficult to see the text as I type).
No idea what I messed up? What other details do you need?
Thanks in advance.
mikemendo wrote:
I wanted the left and right columns to be the same height, so the footer doesn't look like it has been 'floating' lower from one side to the other. The width is controlled by the banner image 968px.
Columns of Google to 'false '. It is a technique that requires a background image set to "container".
. The image is repeated behind the "right columnto fill the depth and give the impression that the two columns are of equal height.mikemendo wrote:
In the left column photos is a background image, so if I put the height and width, then the image is not of appropriate size. The reason why I did a background image was to follow the advice of David Powers in his article on "your first site.
This technique is good to use.
At present the total width of all your elements adds to 982px that is wider than your container attached to 968px. Margin and padding ARE added to the width of a 'container' if:
290px + 10px = 300px
650px + 12px 10px 10px plus 682px
TOTAL = 982px
You can adjust the math for the total width does not exceed the width of your "container".
Use this css and everything should work:
#container {}
overflow: hidden;
margin: 0 auto;
Width: 968px;
background-image: url (.. / images/rightColBg.gif)
background-repeat: repeat-y;
}
{#left_column}
background-color: #FFF;
background-image: url (.. / images/waterfall.jpg);
background-repeat: no-repeat;
Width: 290px;
margin-right: 10px;
float: left;
}
{#right_column}
Width: 656px;
padding-left: 12px;
float: left;
}
#footer {}
Clear: both;
}
-
Another Question regarding the IPC in the BB platform (secure process for RuntimeStore)
In my scenario,.
Process one will constantly be voicemails from somewhere and put it in a table in a RuntimeStore, named _store.
B process, there is a thread T will waitFor the ID of the table in the _store. If succeeds, then copy to another location, i.e.,.
persisting an object and then eaten after this, the thread will remove the ID of the table in the _store.
I wonder if it is safe for both processes simultaneously access the _store.
Wrote in the store. B is read and write to the store.
If someone could help? Very well appreciated.
I am a bear with very little brain and can never remember the right way of doing things. I'm sure that someone will take the holes in what follows and suggest the best ways and it would be fantastic.
I think there are two issues here:
(a) simultaneous access
(b) persistence
(a) the simultaneous access to an object in the persistent store are no different from any object, they are located in PersistentStore, RuntimeStore or RAM.
Thus, for example, let's say we have a vector in PersistentStore, we use just like a queue to a single server (then only add to the tail and remove the head), with a separate 'lock' in RuntimeStore object. Synchronize us on the lock object before we add an element, or remove an item, our access is perfectly safe
(b) persistence
Yes I agree, this aspect is not clear. I always thought I want to commit an object placed partially updated, so in this example, would make the validation in the context of add or remove the treatment.
Of course, things become a little more complicated if you start to talk about data updated in the queue, but I do not think that these problems are related to PersistentStore as a result, I think that these are issues of a general nature and there is probably many places on the web where are discussed different mechanisms to make sure that it works well.
A few other points:
(1) I understand that the treatment of validation is "atomic" on the BlackBerry and the "wound", so if you make an object you will persist all changes to this object. Usually, I maintain a collection that is associated with an Application for validation, points specific in the treatment of requests to ensure that the data associated with an application conform to the battery be fired immediately after a commit.
(2) you can see updates of persistent objects, even if they are not posted. These changes will be lost if they are not posted. So if you have a line like the one above, and two Clients add entries in the queue without committing, the server see the two entries in the queue until the battery is removed. When the server restarts, the two went.
Does that answer the question?
-
Question regarding: the correlation ID of reading in the Oracle SOA Suite BPEL process
Hello
How to read a Message of MQ, which has put in place with a BPEL correlation ID STRING and
invoke the corresponding adapter JCA FTP put with this correlation ID in SOA Suite.
Can someone let me know how to do this?Thank you
KKYou can use the below properties on the activity of reception of the MQ adapter and map it to a string variable.
jca.mq.MQMD.CorrelIdInbound/outbound. The message to retrieve correlation identifier / to. Accepts a string encoded in hexadecimal.
jca.mq.Inbound.MQMD.CorrelIdOutgoing. Correlation identifier of the message recovered in the asynchronous req-response scenario. Accepts a hexadecimal encoded string
-
officejetpro 6978: two questions regarding the purchase of a new
(1) when you use my usb connection, double face printing option is grayed out. When you use the network driver, it is available.
The problem is that each program with which I want to print from must be the default usb to network driver network. I don't have several drivers to confuse all programs. Why the usb driver would double-sided printing?
(2) in the initial configuration, I implemented the instant option of ink start at the lowest. Generally, I think that the first or second option would shape me, but sometimes I have to print a guide of the device of a few hundred pages, as this manual of the printer. If I buy a set of inks retail, can I mix them with instant inks? How would this work?
Thank you.
Hello
Thank you for using the HP Forums.
Interesting questions!
1. using the FULL featue software? If you're not, you can download and install the FULL features software?
This resource would be useful;
Download and install the software for series Officejet Pro 6970
2. it's a sensitive issue. If you change ALL 4 inks to those of the retail and then return the instant ink after printing, it could continue from where you left it last (the number of pages to subscription)
However, if you change only some retailers and a few instant ink crtridges inks, it would be still charged according to normal instant ink subscriptions.
Hope that helps!
-
Two questions regarding the installation of Windows 2003 on UCS - C C220 M3
Hi, I'm trying to do the same procedure as the video below to install a Windows 2003 server in UCS - C 220 M3 with UCSC 2008 M - 8i SAS RAID. This server is managed by the Manager of the UCS 2.2(3g)
https://supportforums.Cisco.com/video/11927946/how-install-Windows-2003-...
But the video quality is very bad.
Can someone help me with 02 questions on this procedure?
(01) this software has been used to simulate the floppy?
(02) the image (.img) file that she used was extracted from the UCS DVD ISO Drivers orI can't find a direct .img file in the downloads of Cisco?
Thanks in advance
My best regards,
André Lomonaco
André,
I think she just used any emulator floppy and .img file, I didn't have a change to watch the entire video, so I don't know what a .img can be useful for...
Note that Windows 2003 is not supported on this server with this firmware, so you won't find the proper drivers everywhere in cisco.com and also Microsoft's support in his favor on July 14 this year so unless there is a laboratory where unexpected behaviors can be granted, I would not install on C220-M3.
-Kenny
-
Question regarding the purchase of laptop wireless
Everything I've ever owned have been HP desktop computers. I need (well Yes, not desire) to buy a new laptop wireless. My intention to buy staples as I experience such great service in the past. Here are my questions:
1 at the present time, I have high speed internet, but not wireless. Can I have both wireless and material "no wireless" goes on the same connection?
2 will I be able to print on my existing (from my wireless laptop) printer if my desktop computer and printer are 'wired '?
3. when I get out of the store, what do I need in my hands? I live 50 miles away and don't want to go home and find out that I'm missing something.
I teach online classes will therefore could go 'on-line' no matter where I'm travelling. I guess my wireless connection works in the House of my daughter in Arizona as far as I know their password? As I have not worked with wireless, I am a little confused how it will work.
I'd appreciate recommendations on routers and laptop computers, if you have a preference. I'll use camtasia in my class so will need microphone and camera possible.
In advance thanks.
Padraig
1. Yes. This is called a hybrid network. With a wireless router that comes with LAN ports (4) which is easy to do. I use a Netgear WNR834B 802.11n router that has a LAN port. Easy to set up.
(2) you will need to set up a simple home network and share the printer on the network from thePC to which it is connected. You can also install a print server connected to your network and it will have its own network address and be available for all the PCs on your network.
(3) you need a wireless router (my preference is Netgear 802.11n because of the reliability, range and throughput of 300 kbs).
I have exxplained the answers to your questions only in simple terms. I have no idea what your level of knowledge is in terms of networking (i.e. the subnets)
My home network is a cable modem which is connected to netgear powerline devices (2)
(via a CAT5 cable) which uses the wiring domestic (115 v) to provide an internet connection to my wireless router that offers a wireless for my laptop and a second office. My server at home and the box of FreeNAS are connected to the network via the router's LAN ports using a CAT5 cable
.
-
Questions regarding the management of windows server data.
my master wants me to describe me the entire windows server 2012 secondary storage system, but as I've mentioned in this regard him now he wants me to write about data for windows server management. can someone expalain me a little on this subject and where can I find information about it.
SF
I suspect that your teacher wants you to discover by yourself by reading (or Googling) it.
On another note server should consider the Technet site
(http://social.technet.microsoft.com/Forums/en-us/home) -
Questions regarding the installation of key code
I was helping a friend with his computer. She bought a computer to measure with Widows XP installed on it, a store of the local computer, about three months ago. She got big virus on his computer. If she needs to format and reinstall Windows XP.
She did not have a sticker with a code on his computer from the store of the local computer. She won't pay hundreds of dollars just to get xp installed.Question #1: Must the machine store provide stickers key code when window selling?
Question # 2, she had the sticker with a code, it could install it with a normal drive in Widows XP Home Edition using his key code?
I was helping a friend with his computer. She bought a computer to measure with Widows XP installed on it, a store of the local computer, about three months ago. She got big virus on his computer. If she needs to format and reinstall Windows XP.
She did not have a sticker with a code on his computer from the store of the local computer. She won't pay hundreds of dollars just to get xp installed.Question #1: Must the machine store provide stickers key code when window selling?
Question # 2, she had the sticker with a code, it could install it with a normal drive in Widows XP Home Edition using his key code?
I'd be very suspicious of any Windows installation where the seller has NOT provided a product key.
There are utilities that will tell you what the product key is a copy installed Windows.
This is what I use:
http://www.Belarc.com/free_download.html
You must go back to the store and query why there was no product key... -
Two questions regarding the restoration of the system.
If you restore a computer to the factoy setting, it should get rid of any virus or spyware that is on this computer?
Is it normal that the text and graphics to appear a bit odd during the restoration of the system, it seems that the resolution is not terrible.
Thanks in advance.
Hello
There are some malicious programs that can survive even a format and a facility so if your restoration or
Recovery has been infected certainly the malware might still be in the game. Did you use a Restore Point
who she returned to a shortwhile ago, or do a restore to the new factory
installation? A restoration is most likely still infected only once.The video driver may need to be updated.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================
If you need to search for malware:
No one program cannot be used to detect and remove any malware. Added that often easy to
detect malware is often accompanied by a much more difficult to detect and remove the payload. If its
better to be too full now than to pay the price much later. Check with these extreme
Overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
UnHackMe execution)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download
It's here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
How to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp <-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
taken (such as the anti-virus software, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://OneCare.live.com/site/en-us/default.htm
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Questions regarding the formatting and using 2013 Office on the computer.
Hi all
Currently I have problems with my camera on Windows 8 app (I have an Asus laptop).
The camera does not work and every time I tried to open the app, he says: "CONNECT a camera".
My webcam is not found on the computer. I even downloaded the VitualCamera sent to me by the seller.
The provider said I have to re - format and reset my computer for the app to work.
1. WHAT CAN I DO FOR THE APPLICATION OF CAM TO WORK AGAIN?
2. IF I HAVE TO REFORMAT, I LOSE THE RIGHTS TO MICROSOFT OFFICE PACK 2013, THAT I JUST BOUGHT AND INSTALLED ON MY LAPTOP?
OR CAN IT BE INSTALLED WITH THE ACCESS CODE THAT I HAVE WITH MY PURCHASE?
Thank you very much
(I'm desperate for a solution).
Ayesha
Response to question number 1:
The provider will know best. But if the camera just recently stopped working, you might be able to fix it using the option #1 on this page, any necessary format.
Answer to question No. 2:
However, if a formula is really needed, you will still be able to re - install Office 2013 by using the source code for your purchase. This code is yours forever, and you can use it as many times as you need, even if you get a new computer (but you can use the code on a single computer at a time, so you should first remove it from your old computer).
-
Question regarding the application of ad hoc patches
Hello
We have plans in the following way:
Upgrade databases to 10.2.0.5.0
Apply the PSU 3 10.2.0.5
Apply a list of one-time fixes identified for our environment (which do not appear in 10.2.0.5.3)
Query:
If the unique patches identified to be applied in our environment are available only up 10.2.0.5.0 and not 10.2.0.5.3 then which of the below mentioned solutions should be proceed to consider:
To upgrade the database to 10.2.0.5.0, apply the unique patches available on 10.2.0.5.0 and then apply the PSU3 10.2.0.5.0
or
Upgrade the database to 10.2.0.5.0, apply the PSU3 10.2.0.5.0, request specific spots on the top of 10.2.0.5.3 and appy the same
Thank you and best regards,
DavidYou will need to check if one-offs comes into conflict with the blocks of POWER 3 in the 10.2.0.5. If this is not contradictory, so I suggest that you can install the one-time 10.2.0.5 on top of 10.2.0.5.3.
I suggest you go with option 2 you listed.
-
A few questions regarding the hardware upgrade and the games on Satellite Pro 2100
Hey,.
I thought that posting this here because it's more about the lines for the games I could think on another topic.
I'll get to the point... Basically, I bought a laptop from a guy that my friend knew. He barely used this laptop and didn't know anything about computers, and he tried to avoid as much as possible. So he got rid of this laptop for me for real cheap.
Now I got it, I had expected either of two things with the laptop.
(1) what I'll use it so I can sit in his bed and travel a little bit while having files, movies, music and internet access. (it wasn't my main idea)
Or
(2) it allows to play video games on it, or to update, so I have a better chance to do so.
I was hoping to get for video games, mainly for my brother to use because his computer is lagging a lot while playing world of Warcraft. I was hoping that this notebook would give him a better experience for a while.
But as I was installing the game on this, I noticed that the disk space is low, so I'm going to buy an external hard drive, so I can send files between the PC and the laptop, and I got an error message saying that the RAM was under "minimum requirements" for WoW.
So I know that I got to level it with something big, but I know not what, so I'm not quite sure that this laptop will run the game at a decent rate. So I thought that I turn to a computer forum and ask.
It's my laptop;
[Satellite Pro 2100 PS210E | http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook = Yes & PRODUCT_ID = 45659 ie]This laptop will do the job don't you think?
Or it will be better for simpler things, or less if I had the ram to 1gig?I don't know much on the laptop, and I'm not really willing to spend too much on fixing, if it's just a change of the ram, then it wouldn't cost much for than to upgrade around 1gig.
Hello
First of all, I must say that this notebook belongs to an older series laptop.
It was equipped with the 1.8 Celeron CPU, 256 MB RAM, 20 GB or 30 GB HARD drive and a 16MB graphics card internal.What you can do is upgrade the RAM up to 1 GB (2 x 512 MB) and the HARD drive. But I think that the maximum size of HARD drive that would be recognized by the BIOS is 120 GB.
I think that the laptop supports one IDE controller and it limited because of the 28-bit LBA HARD drive size.So finally, it is important to mention that you can not pass the graphics card because it s soldered onto the motherboard. Upgrading the CPU is not possible or very difficult.
I come to the conclusion that you will not be able to play games of new generation on this machine. The hardware specs are maybe too low a few simple games would run on this laptop but I'm sure that other newer games will not run smoothly.
Welcome them
Maybe you are looking for
-
HP Envy 17: No HDMI out Audio Option on laptop, brand new HP Envy 17
I'm watching youtube and other video streaming on my TV. I have a receiver that has 5 hdmi that I use to run my appliances. When I plug my cable HDMI video playback on my tv but not audio, and I hear the external device disconnect sound. I opened the
-
Acer Aspire E1-572-6477 Fn key does not!
I use Windows 7. When I first got this laptop the Fn key would work with other keys (for example the brightness), but does not change the volume. The place that I bought someone a fix, I have moved since then. He was worked for about three months now
-
I tried to install upgrades for my toshiba which remained some time and it will not service pack 2 for a reason, what and how do I?
-
one of such custom of norton of the tip allow the system restore work. tried to uninstall norton online and it locksup after, uninstall the type selection screen. neither work. also it locksup in normal mode, please wait screen after logo & carillon.
-
Muse of the options for your shopping cart
People,I recently signed up for ECWID over the weekend after researching on Muse forums so that watching videos. Here is the quick summary...ECWID is impressive right online store into your website and works great with Muse. Here's the good news... E