Queue after you have reinstalled the new MacBook Pro will not start SOUL
MacBookPro, 2.8 GHZ Intel Core i7, 16 GB of RAM
OSX 10.9.4
CC 2014
Hi, I used Migration Assistant to copy the data from my old machine to a new MacBookPro. At the launch of CC for the first time there was a lot of error messages, so I uninstalled all my Apps CC and began to resettle. PP and AE work perfectly but the SOUL doesn't "start queue" and hangs on exit. I tried different codecs. I tried to uninstall and reinstall SOUL. Short of a clean reinstall of OSX and to leave without using the Migration Wizard, anyone have any ideas? Thank you.
If you can take a look under My Documents > Adobe > Adobe Media Encoder > 8.0 > Presets? If you happen to see a link to alias for Presets, remove it and revive the SOUL.
Tags: Adobe Media Encoder
Similar Questions
-
After you have installed the new cartridge HP do not print black ink
HP Officejet 4620, Windows 7... installed new HP black ink cartridge and now it will not print black at all. I followed all the advice line in the help section, even cleaned the vents on the cartridge itself but shows only the white page. No error message is displayed. Diagnostic ran and says it all works correctly. Also cleaned printheads through 2 cycles still nothing. Any other suggestions? It was working fine before inserting the new black ink cartridge.
Hi Teresa1960,
Welcome to the Forums of HP Support! I see that you are facing some print quality problems on your HP Officejet 4620 you cannot print in black ink.
You have completed all THE steps listed here: printer does not print black ink or color of ink or prints blank Pages, without success.
Please note: there are three stages of print head cleaning. Three steps if necessary. If the print head is badly clogged, it may require another round of cleaning. If so, wait 30 minutes after the last step of cleaning (third) to start the first stage of the cleanup process.
If you are unable to print in black ink, I think that the issue may be the printer and not the cartridge. I highly recommend call you our technical support at the 800-474-6836, I'm sure they will be able to help you regardless of the status of the guarantee. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www.HP.com/cgi-bin/hpsupport/index.pl
Thank you
-
Why is my LAN is disabled after you have reinstalled the new windows 7 on laptop
I downloaded on my computer to the wireless network drivers, and still does not have my WiFi on laptop?
I have HP Pavilion 1047ej g6
It is wireless to all help me pls
I downloaded Hp Wireless Assistant, and my program says that my LAN is disabled in Device Manager
where should I go to activate the LAN?
NVM, I fixed it: D ty for the help anyway ^^
I downloaded a network driver and I forgot to update xD so now I have an internet connection:DDDDDDDDDDD
-
After you have reinstalled my Window 7 Professional is not activate with the product key, I received with my package & which I used for a long time. I tried to activate using automated phone system, but could not do. What is the solution. I know that this product key I used only on my current desktop & in past I had not faced any problem on reappattage. This time, I had deleted all the parks & reformatted all readers of my Win7 teacher reappattage. This can be a cause of failure of activation?
Direct activation number: (888) 725-1047
1-800-936-5700
-
APEX does not open after you have created the new Oracle listening port
Hi guys,.
I had to re register Oracle listener using "lsnrctl start". A new listening port has been created and I am able to connect user Apex by PL/SQL Developer. Port 8080 is open.
But if I try to open the application APEX of URL (http://localhost: 8080/apex/f? p = :::) 4550:1:0 its not opening not.) It was working fine until yesterday.
I use Oracle XE 11 g and APEX 4.2
C:\Windows\System32 > sqlplus sys as sysdba
SQL * more: Production of liberation 11.2.0.2.0 kills may 7 22:21:18-2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter the password:
Connected to:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
SQL > SELECT DBMS_XDB. GETHTTPPORT FROM DUAL;
GETHTTPPORT
-----------
8080
SQL >
so I do not know why APEX does not URL. What I have to put something at the TOP after you have created the new listening port. Can you please help?
Kind regards
Marie Claire
Published by: 1004608 on May 7, 2013 14:40Link to your thread to listen would have helped: Oracle XE 11g with Apex No problem of Listener (ORA-12541: listener TNS:no)
It seems that your listener uses the static instance via the listener.ora file registration and missing entries for the http service. Edit your listener.ora (F:\Apex_Installed\app\oracle\product\11.2.0\server\network\ADMIN\listener.ora) file and add the following entries in the listener.ora file DESCRIPTION_LIST. Then, restart the listenerer.
(DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=8080))(Presentation=HTTP)(Session=RAW) )
-
After you have uninstalled the trial version of Captivate on our shared computer, I signed up for try Adobe Captivate in my Adobe account. After the relocation of the trial version with my account it tells me there is 00days for me to try the product. Why?
If it is to be installed on the same machine that will explain why assuming you already exhausted the trial with the original installation.
-
I have reset my mozilla firefox. as I was in trouble, watch videos before you reset it, I downloaded mozilla but it had the same problem, so I reset it. the problem is after this new windos open in my default browser as shaadi.com etc... They annoy me a lot
please help to stop those windows from popping
Hello, this looks like a problem maybe caused by adware on your pc. Please go to firefox > addons > extensions and remove any suspicious entries (toolbars, the things that you have not installed intentionally, I don't know what purpose they serve, etc.). also, go to the windows control panel / programs and remove all toolbars or potentially unwanted software from there and run a full scan of your system with the security software you have in place and various other tools such as the free version of malwarebytes & adwcleaner.
Remove a toolbar that has supported your Firefox or the homepage search
Fix Firefox problems caused by malicious software -
Unable to start using training camp after you have created the new partition
Hello! I recently formatted my macintosh HD partition and reinstalled OS captain. After that, I am unable to boot using boot camp. I still see Bootcamp option in the start menu in the system preferences. All files are visible in the training camp in the finder. Please help restore the functionality of my bootcamp.
Missgugudu92-MacBook-Pro: ~ the vikasagarwal list $ diskutil
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 320,1 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_CoreStorage Macintosh HD 245.3 GB disk0s2
3: disk0s3 Apple_Boot Recovery 650.0 MB HD
4: Apple_HFS GOING 38.8 GB disk0s4
5: Microsoft database BOOTCAMP 35.0 GB disk0s5
/ dev/disk1 (internal, virtual):
#: NAME SIZE TYPE IDENTIFIER
0: Apple_HFS Macintosh HD GB + 245,0 disk1
Logical volume on disk0s2
6D491581-B7A8-4B09-A171-5344C897E32B
Unlocked encrypted
Missgugudu92-MacBook-Pro: ~ list of cs vikasagarwal$ diskutil
CoreStorage groups of logical volumes (1 found)
|
+ Logical Volume - Group C1E508BF-2029-4928-B5DA-BCC660B4390F
=========================================================
Name: Macintosh HD
Status: online
Dimensions: 245321461760 B (245.3 GB)
Free space: 18903040 B (18.9 MB)
|
+-Physical volume 790AA016-C654-48E8-BEA1-FB8377208BBF
| ----------------------------------------------------
| Index: 0
| Disc: disk0s2
| Status: online
| Dimensions: 245321461760 B (245.3 GB)
|
+--> Logical volume family AD745412-840D-45C8-8EBD-3300290AFDEE
----------------------------------------------------------
Type of encryption: AES - XTS
Encryption status: unlocked
The conversion status: complete
High level queries: secure
| Password required
| Accepts new users
| A visible users
| At the Volume key
|
+--> Logical volume 6D491581-B7A8-4B09-A171-5344C897E32B
---------------------------------------------------
Disc: disk1
Status: online
Size (Total): 244950237184 B (245,0 GB)
Exchange rates: full
Reversible: Yes (unlock and decryption required)
Name: Macintosh HD
Volume name: Macintosh HD
Content indicator: Apple_HFS
Missgugudu92-MacBook-Pro: ~ vikasagarwal$ sudo TPG - vv - r show/dev/disk0
Password:
See the TPG: / dev/disk0: mediasize = 320072933376; SectorSize = 512; blocks = 625142448
See the TPG: / dev/disk0: PMBR to sector 0
See the TPG: / dev/disk0: Pri GPT to sector 1
See the TPG: / dev/disk0: GPT Sec at sector 625142447
start index size summary
0 1 PMBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 479143480 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC
479553120 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
480822656 75698816 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC
556521472 262144
556783616 68358144 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
655 625141760
625142415 32 table dry GPT
625142447 1 dry GPT header
Missgugudu92-MacBook-Pro: ~ vikasagarwal$ sudo fdisk/dev/disk0
Disk: geometry / dev/disk0: 38913/255/63 [625142448 sectors]
Signature: 0xAA55
From end
#: cyl hd s - cyl hd s id [Start - size]
------------------------------------------------------------------------
1: EA 1023 254 63 - 1023 254 63 [1-625142447] < unknown ID >
02:00 0 0 0-0 0 0 [0-0] unused
03:00 0 0 0-0 0 0 [0-0] unused
04:00 0 0 0-0 0 0 [0-0] unused
-
Partition Windows 10 does not start after you have created the new internal drive
I'm running OS X 10.11.2.
I have set up a training camp 10 Windows on my Macbook Pro sometime ago, but today I realized that I need more storage. I watched how do so online and came across this thread:How to resize my bootcamp partition without deleting chtol. I followed the instructions, but could not know how do I find my Windows partition.
So I think that I have the problem described here: repair Boot Camp after having created the new partition. I did what Christopher Murphy described on the first page and this error message appeared when I pressed "w
": "Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Writing of abandonment! »
I deleted from the extra without internal hard drive name in the hope that he'll fix it, but it didn't.
I would like to enlarge my Windows partition, but at this point, as long as I can access my Windows Bootcamp partition, that would be great!
EDIT: I unfortunately do not back to the time Machine.
Resizing Windows partitions is not officially supported by Apple - Boot Camp: resize the Windows partition .
Please after the release of
diskutil list
Cs diskutil list
sudo TPG - vv - r see the/dev/disk0
sudo fdisk/dev/disk0
-
After you have reinstalled a new hard drive, my system is slower than before
I have a dv6000 HP Pavilion with Windows vista 32 bit. My hard drive crashed and we bought and upgraded to a 500 GB. I reinstalled all my software and update everything, but it seems that it has not been installed correctly (vista). This is my 2nd hard drive and the 1st time, we have not had any problems. This time it does not appear that correctly reinstalled Vista. None of my previous icons came back, I had to do these myself. My system is "slower" than ever. Commissioning is slow, clicking in IE is slow. My system seems to freeze and lock up a lot now then that on the internet or turned off. Sometimes just clicking on IE or even one of my programs, it takes a very long time to come. No information has no reinstall my external hard drive, everything here is new and fresh. I'm just uninstall everything and try everything again. I am completely frustrated.
Hi Jan,
Do you have more details on the hard disk that you purchased? These can be signs that the drive is defective and fails.Usually, if a car goes to the failure of your computer behaves strangely. This could be anything to take time abnormally long starting or opening programs to receive errors trying to save files.Since how long have you bought the new drive? If he was recently, which means the last month or so, I think it would be better to return it to the store that you bought it and exchange it for a scratch disk. -
Slow performance after you have reinstalled the computer
Original title: PC Performence question
Hi, I reinstalled Windows 7 Home Premium 64 - bit a week ago and for some reason any when I installed this time, it made my PC slow for some reason any. My PC is mainly a PC game and while playing games my FPS is so low that the PC is designed for. My specs of my PC is: Intel Core i5 4670, 8 GB of Ram 1600 Mhz, ASUS B85M-E / CSM Motherboard, EVGA GeForce GTX 960 FTW 4 GB, 128 GB SSD SP600 ADATA, 2 TB Western Digital Caviar Green, Cooler Master eXtreme Power Plus 600W. This question has never happened before, I have owned this PC for 2 years now and never stumbled upon something like that. When I run something like Windows Update my PC returns to the State, it should be, but after its been check updates and my PC is back to having problems. I use a program called "Razer Cortex' for my PC back to what it was before all these problems began to occur. I think some thing in the process systems are realize these questions, but I'm not sure. I would really like to have a fix for this problem to my PC that she had a few weeks back.
Hello
Please contact Microsoft Community. I've surely you will help solve this problem.
This problem might have occurred because of these reasons:
1 conflict between third-party applications.
2. for many programs that are configured to start automatically when Windows starts.
Try the steps listed here:
Method 1:
I suggest you to run System Maintenance troubleshooting and check if it helps. Resolution of the problems of System Maintenance are looking for unused files and shortcuts you can clean or remove so that your computer can run faster.
Open the troubleshooting of System Maintenance Utility
http://Windows.Microsoft.com/en-in/Windows7/open-the-system-maintenance-TroubleshooterMethod 2:
If the problem persists, I suggest to start the computer using safe mode and check if it helps. If so, the value of the computer in a clean boot state and check if it helps.Step 1:
To start the computer in Mode safe following the procedure described in the link. At the start of the computer Mode safe with the minimum set of drivers and files.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7Step 2:
We will define the computer in a clean boot, if the issue occur not in Mode without failure. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.
How to perform a clean boot in Windows
https://support.Microsoft.com/en-us/KB/929135Warning: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.
Method 3:
If the problem persists, I suggest to try the procedure described in the article that willoptimize Windows 7 to speed up performance optimize Windows 7 to speed up performance optimize Windows 7 to speed up performance optimize Windows 7 to speed up performance. Check if it helps.
Optimize Windows performance
http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7Caution:
- Disk Cleanup cleans the files associated with your user account. You can also use Disk Cleanup to clean all the files on your computer.
- The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you more.
-
No signal after you have unlocked the new iPhone 4S
Just got my brand new (sealed box) Vodafone 4S managed to unlock via iTunes, put my existing (of work) O2 Sim in and waited for 24 hours to see that I have NO signal. 3G (internet) and everything works fine but impossible to send or receive calls, messages, etc. Have tried every conceivable reset and restore anything will do. Were informed by O2 customer service that the issue is now with the phone... So, what the * is happening and how to fix this?
There is no such thing as a 'new' iPhone 4S. He was suspended for years.
If you think This is new, check the warranty here: https://www.apple.com/legal/warranty/?cid=acs:applesearch
If it is defective, have it replaced.
-
The configuration of the fax fails after you have reinstalled the software
I have an Officejet J4680 AIO and for some reason the pilots disappered? then I reinstalled the drivers using the full software download. Now, the fax configuration will not say that the cordis phone connected to the "EXT 2" which is the way it works for years and it's that way because it is connected to a DSL modem and because the phone has an answering machine on it. That's how I was told to connect to HP tech and the cable operator. Now that I have re-installed the software, he spends more fax test. The telephone cable from the modem is connected to line 1 and the phone is connected from 2 - EXT because it has an answering machine. Can someone explain to me why this is happening?
Hello pwforever
I have a few articles that can help you. You receive specific errors or codes?
Fax on a PBX, ISDN or ADSL product or assistance with an HP all-in-one phone system
-
After you have reinstalled the family system, xp, can't update to sp1?
Re installed OS, now can't update all sp1. Help
Hello
SP3 - download from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=24
Don't worry about the bit of network installation in the text, it does the job for all environments.
Also, if you have already tried Windows Update, you pourrait have need to follow this link after installing SP for windows update to work
Tricky
-
body in title...
Hi gettaclue2002,
· What is the service pack installed on your computer?
· You have another outside Norton Security software?
Try the methods below:
1. I would say that you stop and start the service on the computer Security Center.
a. Click Start, click Run, type services.msc in the Open box and then click OK.
b. in the list of Services (Local), click on Security Center and then click Properties.
Make sure that you stop and start the service, then check if the problem persists.
2. you can also uninstall and reinstall Norton Security software, and check the results.
Link, please refer to: download and run the Norton removal tool to uninstall your Norton product:http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN&ln=en_US
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Cannot add my Google account in iOS
I want to synchronize my Google calendars with iCal on my iPhone. When I add my Google account in settings-> Mail/Contacts/calendar, I click on 'Google', enter my Google account email and password then and for a split second the screen to select wha
-
Cannot install microsoft fix - it Center... is not a valid directory name
-
Errors SCSI sense in Event Viewer
Once an hour, I get a handful of warning message in my event viewer. They are all the same except change that denotes a different physical disk (7-14). There is a mix of SATA and SAS in a MD1000. The SATA drives did not produce the error. A so-ca
-
Windows display driver does not
On my lap top Toshiba Satellite I get the above message when I try to watch videos or play games. Whites out screen, the message and the tap of the Tower takes over. Sometimes the video player will work ok. Can anyone suggest anything? but please kee
-
BlackBerry Smartphones Portuguese and the French, is that the same? -HELP PLEASE
Hello I'm Portuguese and I have a doubt, do you know if the software in french and Portuguese phones comes back exactly? and if I buy a french that I'll be able to use it in perfectly here? The phone has been unlocked by its true owner french so I gu