queues the IMAQ image data type
I'm trying to run multiple queues in the same loop entering IMAQdx images from several cameras, and then save to AVI. After reading the site nor a little, I discovered that the reason why I get only the last image of each bucket, repeated on all frames in the AVI file, is that the IMAQ image data type stores only the memory location for the image, not the image itself data. However, I don't see a better solution for the queues of the actual image data. What conversion could be the fastest / are in charge of the processor the lowest?
For each image you must initial Image space.
You can use something like this:
You need to add initialization camera (s) and AVI. You must add the multicamera feature. Stop recording is missing.
!!! Don't forget to throw lines and Images!
Tags: NI Software
Similar Questions
-
ODI 12 - problem with missing data in the store column data types
Hello world
We have recently installed Studio 12 on Oracle RDBMS ODI. We have created some topologies, contexts and the logical architecture. We have created the necessary templates and made reverse engineering. The strange thing is when a model data store opening, we have noticed, the data types of its attributes are not displayed and cannot be selected in the drop-down list because they do not exist yet. You can see the image below.
So the mappings are not correctly executed because on the stage of the creation of work tables CREATE script was not generated correctly. (It's something like "CREATE TABLE < name > ()")
Anyone can give an idea what could be the reason for this and how might be solved?
Any ideas would be appreciated.
Thank you in advance.
Hello
Please see the links below this should help you.
http://gerardnico.com/doc/ODI/Webhelp/en/refmanual/topology/snpdt.htm
http://gerardnico.com/doc/ODI/Webhelp/en/UserManual/topology/topology/topo_reverse_datatypes.htm
http://odiexperts.com/data-types-creating-what-is-missing-for-any-technology/
-
Need help with treatment of the raw image data
I found that I can access the input raw through params [0]-> u.ld image and the output image I can write via the output in the rendering parameter works. I get most of the information required by the data, the width, the height and rowbytes members of these structures, but I can't understand how to determine the format or bit per pixel images. I would like the process, the data of params [0]-> u.ld.data and write directly to the output-> data, but I need to know the pixel format to correctly interpret image data.
How can I get the number of bits of the output images? Is there a way to make my plugin support only 128 bits per pixel floatin' fist data?
the best way to tell the depth of the incoming world is:
extra-> input-> bitdepth;
It gives all of the following values: 8, 16, 32.
the 'extra' is one of the parameters passed to your plugin in the smart_render call, and this is true for the worlds of entry and exit.
the second way is a little heavier, but you can check everyone with it:
PF_WorldSuite2 * wsP = NULL;
ERR (suites. Pica()-> AcquireSuite (kPFWorldSuite, kPFWorldSuiteVersion2, (const void *) &wsP));)
ERR (wsP-> PF_GetPixelFormat (inputP, pixelFormat));
ERR (suites. Pica()-> ReleaseSuite (kPFWorldSuite, kPFWorldSuiteVersion2));
the type of pixel AE uses always is ARGB.
-
Work with the first HP data types?
I'm trying to get a clear understanding of the data types of HP Premium so that I can better exploit feature internal rather than copy and paste, edit, or having to retype. However, I can't find a tutorial, guide to style "quick start" or comprehensive information on this subject anywhere. Finally, I would like to do things like the following:
(NOTE: I only list these questions in order to better explain what I'm looking for.) "There ARE no need to answer.)
- Pass a list of expressions (sometimes solve() returns a list) in a function such as unapply() and run it on each item, rather than interpret the list as parameters
- Precede the value of formula 1, "Y =" and then save the result in V1
- Understanding type (x), type (X) and ('X') - I understand that X is a floating point number; x and 'X' they return all two DOM_IDENT, but are in that they also treated the calls function? Or 'X' becomes X and then treated as a float value?
- Is there a better way than unapply(), to replace by X-> x to a function, a function of return?
- For example if: F1 = X-> Sin (x)
- NOT a function: the seizure of F1 (x) returns the expression: Sin (x)
- IS a function: unapply entry (F1 (x), x) returns the function: x-> Sin (x)
Is anyone know if such a guide or tutorial exist, and if so, could you please point me to it?
Hi!, ETH:
Try, with...
(1) www-fourier.ujf-grenoble.fr/ ~parisse/calc/hprime.pdf
(2) www-fourier.ujf-grenoble.fr/ ~parisse/calc/hprime2.pdf
-
Initialize the cluster with data types different (lots of data)
Hello
I have data, which are composed of different data types. First of all, I have initialize cluster with these types of data and then "print" to light (photo). In case of photo data carries 8 characters than ja 4 floats. It was easy to initialize, but here's the question: How can I do this even if I have data that look like this (interpreter):
floating point number
name char [32]
Short value [16]
What I create loooong cluster which have a fleet of 32 characters, 16 short films? Or I can create these 'paintings' in a different way?
THX once again
-Aa-
I suggest using the table-cluster and configuration of the cluster size to match the size of your berries, then package these groups together. In terms of storage of LabVIEW, there is no difference between a group of
floating point number
Name1 tank
name2 tank
...
short value1
short value2
...
and a bunch of
floating point number
-> cluster shipped from
Name1 tank
name2 tank
...
-> cluster shipped from
short value1
short value2
So you can use the cluster table to get the right sizes rather than individually create all these values in a single giant cluster.
-
Resolve the conflict of data type of TestStand pragmatically in CVI
Hello
I'm porting a UI for the 2010 ICB/TestStand. My problem with the badly planned spread data types defined custom. While I can handle the MyTypes.ini and StationGlobals definitions, sequences that we are loading are originally the dialog box 'Type to the Type of conflict'. The sequences that are loading have been created in previous versions of TestStand (3.1 and 4.0 for the most part). The main reason why a 'conflict' is detected because the data types of the sequences can either have different indicators (for example, "modified") or updated dates. The structure of the types are ALWAYS the same, so there is no danger by choosing the "wrong" data type However, given that the "currently loaded" Type is one that "must" always be used, it would be great if the resolution could be resolved so that the operator never has to see the dialog box. In our environment of manufacturing of these dialog boxes are considered errors.
There are hundreds of files in sequence that could be affected. The process to go through each of them individually and setting data types would be impractical (really, out of the question).
I use TSUI_ApplicationMgrOpenSequenceFile() to open the sequence and can not find a way to settle the conflict resolution to automatically choose the "currently loaded. Please let me know if there is a way to do it, and if so, provide an example. Any other suggestions you might have would be welcome.
Thank you
JF
(Either by the way - I meant "programmatically", not "pragmatic" in the subject heading)
I tried your suggestion and I still get the dialog box when
-
function to change the names of data type members
I was wondering if (TestStand 4.2) contains the ability to call all referrences to a Data Type member used in a sequence will be replaced by the new name if this member DataType is renamed in the MyTypes.ini file?
The answer is no, and it's a difficult problem, if you speak code modules written in different programming languages different sources including files and always a problem semi-difficile if you're not because of the possibility of lookupstrings appearing in places unusual or used in an unusual way.
However, there are 2 features that exist in TestStand 4.2 which should help with this.
(1) search/replace in files - if the old name is quite unique, it should be easy, if it is not then maybe with a clever use of regular expressions in the search string, it should still be feasible.
(Monitor 2) - this should help you find the places that need fixing or you might have missed to make 1) above.
Hope this helps,
-Doug
-
I really want to get the IMAQ Image IMAQ Arry case to Image.vi files
Hello!
Although already, I installed LabVIEW8.2 and NOR-IMAQ, I don't have IMAQ Image cases and IMAQ Arry Image.vi files.
To use the infrared camera, I need them.
I really want to get the case Image IMAQ Arry Image.vi files IMAQ.
How can I get these files?
Please, let me know the methods.
Sincerely!
Thank you very much for your explanation.
Solve the problem.
Have a nice day ^ ^
-
Exclude because of the non supported data type DATE.
I use SQL Developer with Oracle Data Miner GUI.
All models excludes the data types DATE and TIMESTAMP as not supported.
How to build time series forecast in workflow Data Miner?
MDGS does not provide a time series algorithm, but you can try the following blog by Marcos Campos to see a technique that uses the SVM to see if it works for you.
THX, mark
-
Add/change the columns of data type (scripting)
Hello
I am writing a script to add default columns and their values in tables. So far, for me, it is possible to add columns to an existing table in the model.
Then, I want to add value to the data type. I discovered there is a method called getDataType(). So far, I have not found the "setter; for this property.
Like other scripts, I started by creating a table with columns, and then using the API to read the values.
A simplified version of my code:
get the columns of table
myTab var = model.getTableSet () .getByName ("T_POSITIONS");
colArray = myTab.getElementsCollection () .toArray ();
loop through columns
for (i = 0; i < colArray.length; i ++) {}
the type of var data = colArray [i] .getDataType ();
model.getAppView () .log (colArray [i] + "a datatype" + dataType);
colArray [i] .setDataType ("VARCHAR2 (1)");
}
An error occurs when I want to run this script: could not find setDataType function in the object ID.
I can't find the right method to add/change the datatype property.
Any information would be appreciated.
Hi Bart,.
Here's what's in the column in the XML file:
FDB11R21 EMPLOYEES FIRST_NAME 2015-01-13 12:45:08 UTC First name of the employee. A not null column. HR_870 true false LOGDT024 20 BYTE false 20 BYTES If you need set the size in "20 BYTE" or "20 CHAR".
Philippe
-
using a column having the nvl char data type...
The entity table has 4 records with 'X' account status and 42 records with account_status with null.
Select * entity where nvl (account_status, 'X') = 'X '.
When I run the query above, must be extracted all 46 records but only 42 records with only statement null is read.
Also when I run the query below
Select * entity where nvl(account_status,'T') = 'X '. No line is fethced.
The account_status column is char data type.
When I use the same type of query with a number data type column it works correctly.
NVL work differently for the char data will type column? Could someone help me on this? I don't know if I am wrong anywhere.
vesrion of Oracle that I use here is Oracle 10 g.Hello
SELECT * ENTITY WHERE NVL (UPPER (TRIM (ACCOUNT_STATUS)), 'X') = 'X '.
Check the empty space in the field you are trying to cut.
Thank you
-
selection column of the table xml data type
Hello.
I tried the following example with xml as column name data type
So, after that I tried this query to retrieve the State of an attribute data.create table emp_detail( empno number,ename varchar2(32),empdetails sys.xmltype) Insert into EMP_DETAIL (EMPNO, ENAME, EMPDETAILS) Values (1, 'satya', XMLTYPE('<NAME> <FIRSTNAME>SATYA</FIRSTNAME> <LASTNAME>SREE</LASTNAME> <LOC>SECBAD</LOC> </NAME> ')); Insert into EMP_DETAIL (EMPNO, ENAME, EMPDETAILS) Values (2, 'jo', XMLTYPE('<NAME> <FIRSTNAME>JO</FIRSTNAME> <LASTNAME>REDDY</LASTNAME> <LOC>MYPR</LOC> </NAME> '));
But those who above indicates no record...SELECT a.empdetails.extract('//NAME/text()').getStringVal() AS "Table Name" FROM emp_detail a WHERE a.empdetails.existsNode('/NAME') = 1;
Why?
Thank youSQL> SELECT a.empdetails.extract('//NAME/FIRSTNAME/text()').getStringVal() AS "first_name", 2 a.empdetails.extract('//NAME/LASTNAME/text()').getStringVal() AS "last_name", 3 a.empdetails.extract('//NAME/LOC/text()').getStringVal() AS "loc" 4 FROM emp_detail a 5 WHERE a.empdetails.existsNode('/NAME') = 1; first_name last_name loc -------------------- -------------------- -------------------- SATYA SREE SECBAD JO REDDY MYPR
-
Help with the problem of data type...
Hi friends,
I have a requirement. I have a warrant 2 guests (from and to). The data contained in the guests are like "Fall 2006", "spring 2006", "full of 2006", "Academic 2006"for a given year. " I have data from the year 2000 to 2008. The data type of the column duration in varchar. I have a report corresponding to this prompt. This report works well if it is not linked with the guests. If I have this tie with guests, its giving me results because in the report I gave filter as term is greater than or equal to ' fisrt_pv "(où first_pv est la variable de présentation j'ai utilisé pour mon d'invite de terme... comme second_pv sage est pour à terme rapide) and the term is less than or equal to"second_pv"."» So, if I put my guest (and) fall 2007 and (spring 2008 to) and run the report, its sends a fall 2007, Full 2000... Full2008, spring 2000... Spring 2008. It is because it is comparing the term based on letter of departure with all the other term. We know that the fall 2007 and spring 2008 are next to next semesters, is expected to see just a 2-column output. How do oracle know that?
I have a term_number associated with this table numbered 1 to the spring of 2000, 2 Full, 3 for autumn 2000 2000, 4 for academic 2000... all the way up to academic 2008. I used this area to the command prompt to order because I want the guest to show as the spring of 2000, Full 2000, fall 2000 etc. instead of 2000 academic, University 2001... hope this field will be useful for you to analyze... I need your help to do this... If you need other info let me know... Thanks for your time n help...
Kind regards...Yes. The problem is that your guests are CHAR, so the calculation "superior to" is done alphabetically rather than numerically. This digital keys.
Create two columns to contain the term_number that match the values selected in your guests. Then the BETWEEN operator do not filter on numeric values. You can still view the CHAR values in your report, but now they will be in the range that you would expect.
-
The format of data type in xml editor desktop?
Hi all..
<G_CUSTOMER_TRX_ID>
< INVOICE_NUM> 001201200120< /INVOICE_NUM>
<INVOICE_DATE> 10 May 12< /INVOICE_DATE>
<CUST_NUM> 45532< /CUST_NUM>
BILL <TYPE_NAME>< /TYPE_NAME>
< /G_CUSTOMER_TRX_ID>
<G_CUSTOMER_TRX_ID>
< INVOICE_NUM> 00120 - 1200120 - ABC< /INVOICE_NUM>
<INVOICE_DATE> 10 May 12< /INVOICE_DATE>
<CUST_NUM> 45578< /CUST_NUM>
BILL <TYPE_NAME>< /TYPE_NAME>
< / G_CUSTOMER_TRX_ID >
It's my .xml.
I create template for domain Invoice_Num, Invoice_Date, Cust_Num, Type_Name.
Invoice_Num in the table using type Varchar2 and with the help of ordinary text .rtf.
But, if I try an excerpt with Excel, for invoice_num, I get data - > 1201200120 and 1200120-00120-ABC.
Why not show '0'? I want to Excel output I get data 001201200120 and 1200120-00120-ABC.
Please help me.
Thank you all...
Hello
"Where evere your form invoice_num field is it in rtf just before which form fields simply use =".
and after the use of this form field.
Let me know the status
-
Primary key on the attributes of data type
Production data Modeler 3.0 is really nice! Kudos to the development team.
Now for a question. Any idea when the Data Modeler will support (generate after modeling) the following SQL statements?
CREATE or REPLACE TYPE x_flags_t
AS AN OBJECT
(
ID NUMBER,
has_note NUMBER,
has_image NUMBER,
created_on DATE,
created_by VARCHAR2 (30 CHAR),
modified_on DATE,
Modified_By VARCHAR2 (30 CHAR),
FINAL
X_flags_t FUNCTION CONSTRUCTOR
(
GITES x_flags_t IN OUT NOCOPY
)
RETURN SELF AS RESULT
,
FUNCTION MEMBER update_row
(
X_flags_t COTTAGES
)
RETURN x_flags_t,
FUNCTION MEMBER update_note_flag
(
X_flags_t COTTAGES
p_note_flag in NUMBERS
)
RETURN x_flags_t
) NOT FINAL
;
/
CREATE TABLE x_flags
(
indicators x_flags_t
)
/
ALTER TABLE x_flags
ADD (CONSTRAINT x_flags_pk PRIMARY KEY * (flags.id)) *.
/Hi Scott,.
Thanks for your comments.
I logged an enhancement request to enable a primary key for a Table containing columns of structured Type to refer to attributes of structured Type.David
Maybe you are looking for
-
Bootcamp: Installation of Windows 10 USB cannot find bootcamp partition
Hello I deleted the old partition 10 windows using bootcamp, upgrade of the space itself. I ran BootCamp again to set up windows 10 pro, as I had already installed on my end 2012 21.5 "iMac and the wizard successfully install on a USB stick, my Windo
-
I use TWC (Time Warner Cable) as my server e-mail and Firefox as my browser. I went to my emails and has attempted to open an attachment and got an error message stating "security settings prevent the download file. Well, I contacted TWC, Norton and
-
I lose my tab groups, once I close Firefox. Is this normal?
Several times I have created groups of tabs, named and worked with them successfully. But every time after that I closed the session of Firefox and signed out of the browser, and then later started new session of Firefox (Firefox turned on again), I
-
Hello is there a problem with huge data volumes in a global functional to carry the values from a single loop tp the other (perhaps a producer to consumer)? I'm talking about a volume of about 8K of data of the doubles pairs. Currently, this is no pr
-
Where to download the bios?
Where can I get bios updates? I don't find any bios file in the section support and driver.