Quick Launch buttons work well after the upgrade to windows 7

Similar Questions

• AMD Rrdeon HD 7400 - models of HP pavilion G6 1117tx graphics card now works correctly after the upgrade of windows 8 Pro.

  Hello

  I have hp Pavilion G6 model 1117tx.  I have upgraded from windows 7 to windows 8 Pro. After the upgrade, I observed that on right click option, I didn't fine CCC and Configure with the graphic option switachable is missing. so please help me how can I solve DIF relationg AMD redeon 7400 grphic card and intel option hd switchable hd 3000 series grphic.

  Help, please...

  Patel Mounal

  (1) have you read full sheet of your Hp pavilion?

  (2) otherwise average, first downlaod read the documents at the bottom of link

  http://h10025.www1.HP.com/ewfrf/WC/manualCategory?CC=US&DLC=en&LC=en&Product=5118185&Query=HP%20pavilion%20G6%201117tx%20&Tool= &

  (3) these manuals may be contains details of compatible video graphics cards

  sufficient capacity

  (4) and check that your graphics card is compatible with the motherboard and current operating system

  (5) read the technical specifications of AMD Rrdeon HD 7400

  http://www.AMD.com/us/products/notebook/graphics/7000m/7400m/pages/Radeon-7400m.aspx#2

  (6) see amd graphics software drivers FAQ, see link below

  http://support.AMD.com/us/KbArticles/pages/AMDGraphicsSoftwareandDriversFAQ.aspx

  (7) downlaod and install AMD autopilot below link detection tool

  http://support.AMD.com/us/gpudownload/Windows/pages/auto_detect.aspx

  (8) download and install the latest drivers from AMD catalyst HD 7000 series, choose current

  operating system at the bottom of the link

  http://sites.AMD.com/us/game/downloads/pages/downloads.aspx

  Restart your system

  Guilbert

• Re: Satellite A500 - FN key does not work after the upgrade to Windows 7

  Hello
  The FN key does not work even if I have (Toshiba Value added Package) and (toshiba flash Cards help).
  Happened after the upgrade to Windows 7 and using the upgrade CD to retrieve all of the tools and utilities.

  Satellite A500 - 134

  Try restarting Flash cards.
  Start > all programs > Toshiba > utilities > restart Flash cards.
  After doing this press FN button several times.

• FN keys do not work after the upgrade to Windows 10

  Why the FN keyboard does not work after upgrade to Windows 10?

  FN keys are controlled by utilities and special tools of Toshiba. Usually after the upgrade to Windows 10, the parts of the pre-installed Toshiba software must be upgraded to version compatible and support Windows 10...

  You have not provided information on the laptop model so I can't say with certainty if your unit is 10 Windows supported or not...

• Satellite P855 - function keys do not work after the upgrade to Windows 10

  Function keys do not work after the upgrade to Windows 10
  I know that I need two drivers (Flash cards support utility) and (Toshiba function Key Utility), but on the page download Toshiba is not suitable for Windows 10.
  Anyone know when and if it will be available?
  Thank you

  I'm also waiting for Win10 of things and do not know with certainty how Toshiba will start with the support of Win10. I hope that will happen soon.

• Want to dv6 Notebook PC 7226nr: scan fingerprint hp simplepass does not work after the upgrade to windows 10

  My HP SimplePass fingerprint reader does not work after the upgrade to Windows 10.  Is there a fix for this yet?

  I thought about it.  The upgrade to Windows apparently damaged 10 HP SimplePass software.  Once I uninstalled and reloaded the program, everything started working.

• After the upgrade of windows (Pinball) 10, when working in Lightroom adjustment brush is not making changes, it is there but it does not work.

  After the upgrade of windows (Pinball) 10, when working in Lightroom adjustment brush is not making changes, it is there but it does not work. Also several times when I go to the library to develop fashionable mode, programs stops. I am really frustrated. Help, please.

  Also several times when I go to the library to develop fashionable mode, programs stops.

  It is often a symptom of an incompatibility between LR and your video card.  If the other suggestions don't help you, go to System Preferences > performance and uncheck use Graphics Processor.

• After the upgrade to windows 10, my dreamweaver has stopped working. Could someone give me a solution for this? I really need DW!

  After the upgrade to windows 10, my dreamweaver has stopped working. It starst and lasts 30 seconds and never work again.

  Could someone give me a solution for this? I really need DW!

  Problems during the installation or opening Dreamweaver on Windows 10

• computer with windows 7 and cs4 will be cs 4 still work after the upgrade to windows 8

  computer with windows 7 and creative suite 4 will it still work after the upgrade to windows 8

  You can expect problems from not being able to install to the loss of some functionality.  the best you can do is to install using the mode of compatibility or upgrade to cs6.

• Laptop Compaq CQ58: LAN Ethernet does not work after the upgrade to windows 8.1

  After the upgrade of Windows 8 to 8.1, my Ethernet LAN is no longer in effect. Wireless LAN connectivity is OK. I run the HP Support Assistant and downloaded the drivers for 8.1. Hovever, I don't see a listed 8.1 for the LAN Ethernet driver.

  It seems that you encounter the same problem, I did when I ran the free preview of the W10. I had this error on the card reader.  I have no idea how to solve this problem.

  Is there is no ethernet controller needing drivers in Device Manager, then it is probably the realtek lan adapter that has the number 12 of the code, or it is part of the motherboard that controls the ethernet adapter.

  If you need Atheros bluetooth driver, then this is probably the one you need.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_127984_1

  Unfortunately, I won't be able to help you with question 12 code or ethernet.

  IMO, they are insoluble.

• After the upgrade of Windows Windows 7 10, could not recover my product key.

  Original title: windows 7

  After the upgrade to windows 10 windows 7, could not recover my product key. When I connect my system am get notification that you may be victim of software counterfeiting and copy of windows is not genuine. you do me too much this error code. 0xC004F057. Please help me to recover my product key. my windows does not work after the upgrade as well.

  I suggest that you run the diagnostic tool Microsoft Genuine Advantage in normal mode and copy and paste the results into a response for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012

  Run the tool and when it ends, click the copy button, open a text such as Word or Notepad file and select Edit, paste. You can paste directly into an answer here. Open a response, right click and select Paste.

• Volume controls on the keyboard after the upgrade to Windows 8

  I have a Touchsmart 520-1070 with the mouse and keyboard without wire factory.  After the upgrade to WIndows 8, the volume controls no longer work.  I tried the Recovery Manager to reinstall the keyboard drivers, but there is no driver keyboard under hardware drivers.

  In the following device manager are listed under keyboards:

  HID keyboard device

  Keyboard 109 MCIR Microsoft eHome

  Keyboard MCIR Microsoft eHome

  Microsoft eHome key remove control Keayboard

  PS/2 standard keyboard

  Any report that they are installed and are working correctly and that the drivers are up to date.

  Has anyone else seen or solved this problem with a Touchsmart computer?

  The instructions below were provided by HP support.  This has restored the function on the keyboard volume controls.  The referenced below drivers are drivers IDT high definition Audio Device.  I am not sure that it was necessary to reinstall the audio drivers.  It can only had to remove the USB dongle and back to restore the functionality of the button.  Note: the USB dongle is located behind the VESA Panel to the back of the PC.  No tools are required and the dongle can be removed and replaced without shutting down the PC.  VESA panel removal requires a bit of a steady hand, pulling the lip which is close to the connections on the rear panel.

  Instructions received from HP:

  Please go to the following link and check the "return of the system", article #7 is the USB dongle:

  http://support.HP.com/us-en/document/c03026390

  After you have reinstalled the receiver, please download and install the following driver:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-110499-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

  Then install the following update:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-112060-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

• DVD player not recognized after the upgrade to windows 8

  I write this to document some odd behavior, that I lived after the upgrade to Windows 8 in the hope that it might save some grief for others.  Of course, if someone could explain why this problem occurs, I'd be very interested/grateful for an answer.

  I recently updated my computer from Vista Ultimate to Windows 8.  I did a clean install of Windows 8, because there is nothing special about the machine I wanted to preserve.  In all cases, the upgrade went without a hitch and I was soon back up with Windows 8 as my OS (I really like, btw).

  The only oddity I noticed after the upgrade is that my DVD drive was not recognized by the operating system.  Remember, this is the same DVD player that was used to install the OS, so I found it rather peculiar.  After a bit of lost time, try software solutions theoretical I started to play with the equipment.

  My motherboard is an ASUS M3A78-EM.  My hard drive is attached to the SATA1 port and my DVD player is plugged into the SATA2 port.  I removed the DVD drive from SATA2, plugged into SATA3, restart Windows 8 (from HDD on SATA1) and Windows 8 now recognizes the drive!

  I thought it was really weird, so I stop, put the DVD on SATA2 drive, rebooted, and the drive was no longer available in Windows 8.

  OK, so I thought that maybe the SATA2 channel was bad (even if he had worked at the Windows 8 DVD installation, just an hour or two before), so I put my HDD on SATA2 and the DVD drive on SATA1.  After doing this, Windows 8 start very well (so there is nothing wrong with SATA2), and it recognizes the DVD on the SATA1 drive.

  OK, so I did that for a while, and virtually all combinations I tried worked as long as the DVD player is not plugged in SATA2.

  I cannot live with that, but thought it was really strange.  Also, I note that the old operating system (Vista) was acknowledging the same DVD player while it was plugged on SATA2.  This leads me to believe that the problem has something to do with Windows 8, but I can't imagine what could be the cause.

  Thanks dude.  After you create this registry key/value and restart Windows 8 was able to finally see my DVD drive on SATA2.  =)

• Lightroom does not start after the upgrade to Windows 10, Version 1511, 10586

  Hi all

  After the upgrade to Windows 10, 1511 Version, lightroom 10586 CC can't be launched. Adobe cloud nor any link office or file system path to the files directly program. Lightroom.exe can be seen in the Task Manager for a second and then disappears to nirvana. No answer, no trace.

  What should do?

  standard things as uninstall - re - install, stop between the two, log out of the clouds - connect to the cloud, register of audit were made in several variants without success!

  Kind regards

  Robert

  Thank you hipolitorodrigues,

  your answer showed me the way. I found a solution more simple in a parallel thread, whose response brought back LR to life.

  CU, Robert

  8  re: does not start Lightroom CC

    

     Tanuj Sandal   14.12.2015 19:41 (als Antwort auf: antonk97314826)

  Go to the Panel, then programs and features.

  Please select Microsoft Visual C++ 2012, 2013, and fix it.

  Restart the computer and then let me know if the application works.

• Could not find photos after the upgrade to Windows 7

  Bridge worked very well under Vista, but after the upgrade to Windows 7, I can't find one of my photos with bridge files.  Photoshop CS4 find them OK and made Lightroom, but for some reason Bridge does not list the sub folders.  If I click on libraries, he says "no file".  It does not list the pictures or my pictures.  I'm totally stumped.

  AlAugustine wrote:

  I tried all combinations of ctrl-click, click and ctrl, etc, I can think of but nothing reveals the reset box.  When I double click on the desktop icon, it loads almost instantly leaving no time to press ctrl before loading.

  One thing I did not mention, is that you must check that the bridge is already done in the background.  Open the Task Manager and click the processes tab and see if bridge.exe is listed.  If program so quit smoking.

  If you have the possibility of automatically loading at startup deck, I recommend that deactivate you in the Advanced preferences file.  It causes more problems than it solves.