Quicken willnot print to my new HP Photosmart Premium printer

Similar Questions

• Notice of failure of the printhead on all new HP photosmart c310a.

  I have a new HP Photosmart Premium c310a printer. Every day I get a message saying «failed to printhead...» The print head seems to be missing or damaged. Printing cannot happen without the print head or the installed cartridge. "I even ran the printer via the print head cleaning and I always get the notice.

  The printer works and large prints, but I keep getting the message box. Can I do to stop the notice? I'm under the it on Mac OS X.

  Hello

  As you have already cleaned the print head I suggest that contact the HP support by phone a replacement, because it is a completely new product.

  See the link below for the Support phone numbers

  http://welcome.HP.com/country/us/en/wwcontact_us.html

  Hope this helps

  Ciara

• New HP Photosmart 7520 e-all-in-one printer from the box, removed the tape and cartridge access

  

  I have a new HP Photosmart 7520 e-all-in-one printer just out the box. I removed the tape and cartridge access door does not open more than 40 degrees. The figure represents about 80 degrees. I'm afraid to force it. I can't put new cartridges in the printer. Very frustrated trying to get help. It doesn't seem to be a phone number or Web site for direct assistance. HP has really gone down hill. Help!

  Hello

  Mine is about 45 degrees, sufficient space to install the ink cartridges.

  Kind regards.

• HP Photosmart Premium C309: printer cannot print black ink (it's a new cartridge).

  Hi everyone, I hope someone can help me troubleshoot my printer.

  yesterday, I installed a brand new authentic ink cartridge of HP for printer HP C309 photosmart premium.

  The ink level for black on the printer is full, my other levels of color ink is low, but that should not affect something because I never print in black and white for the documents from the school.

  I tried to print black-and-white documents and the printer is fading the black in and out and sometimes not black at all, despite the fact that I have installed a new black ink cartridge.

  I tried:

  (1) align the printer cartridges through the tool on printer settings (this alignment failed 2 times, always without success)

  (2) cleaning of the print head through tool on printer settings (tried this 3 times and still no improvement)

  Any other suggestions?

  Hi @plutolover2011

  I want to help you to be able to print again. I understand your color cartridges work, but it's not black ink.  Please start with the procedure described in the following document; Printer prints a blank Page or does not print black or color ink for HP Photosmart Premium C309a the C309c all-in-One

  If you have performed all the steps in the document above and the problem persists, not one of HPs, my personal recommendation is to use the solution put forward in the next video.  I suggest that if the printhead and the printer he are out of warranty.  Hot water rinse printhead - HP ink printers of the series with removable head.

  I have recommended this solution to others and have been successful, but I can't guarantee that this will solve the problem, it is a term of type line of effort. I hope it helps.

  PaganC wrote:

• How can I get windows XP to talk to my new HP photosmart C410 series printer all in one? -Thank you

  When I try to install my new HP Photosmart C410 series, it gives me an error message: HKEY_CLASSES_ROOT\CLSID\ {000C101C-0000-0000-C000-00000000006}.    I tried to install several times with the installation CD and the HP Web site.

  I contacted HP technical support, but they were not able to help me.  If this is not resolved, I will run the new printer to the store.

  Thank you

  Please provide the full error message.  Also, make sure that you typed correctly - are you sure that the CLSID does not stop with "46" rather than simply "6"?

  You can also follow the steps in the following article to clean things up and try again: One Article

  • Make sure that you install the printer by using a user account with "computer administrator" privileges (if you are not sure, click Start > Control Panel > accounts of users, under the name of each account will be "Computer administrator" or "Limited account").
  • Do not connect the printer to the computer until you are prompted to do so.

• New HP Photosmart D110 do not print wireless

  I have a new HP Photosmart D110a and have successfully set up and everything seems OK to print until I have try to disconnect from the computer to move.  It says it is connected wireless: the blue light is on, the wireless says wireless network test report is on and working, she carries the correct network name (ssid), Network Setup page indicates an active connection Wi - Fi ready.  However, it does not print if I disconnect the wired USB connection.  I paid extra for the wireless printer so I could place away from the computer so I would really like to get this matter resolved.  Other data that may be useful: computer HP m91000t with Vista 32, which is also connected to a cable modem comcast through a new netgear router wireless.  I tried to turn off the Norton firewall and it will still not print wireless.  All software provided with the printer appear to install correctly.  I tried to use Vista 'add printer' now there's a second printer in printers in Control Panel, one that says "series of HP Photosmart D110 and added one that says: ' HP78EF1A (series of HP Photosmart D110);" " I would like to delete any printer is not necessary.  I can print wired form or printer.

  Your computer thinks that the printer is connected via USB.  You must add a version of it for wireless printing.  Here's how:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the host name of the printer (found on the network printer configuration report the generated above). Click Next.
  If you get a message about required additional Port information, then the printer is not found using the host name. You can go back and start over or using the IP address of the printer instead of the host name.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file that begins with hp and ends with ".inf". Click Open, and then click OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Make a choice and click Next.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• My new HP Photosmart Plus printer will not recognize my AT & T U-Verse router wireless

  I am trying to connect my new HP Photosmart Plus printer to my wireless router.  The router works fine with my IPhone and two portable and had no problem of wireless connection to them.  I can't solve the problem.

  Sometimes Internet service providers have more control over the router like the printer.

  -Unplug the Internet line, which runs between the router and the wall
  -Cut the power to the router, wait 30 seconds, then turn on the power.
  -Go through the normal process of the printer connected to the router.
  -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
  -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you do not know, use the current IP address.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter IP router (on the self-test printout) for the bridge and the first DNS.
  -Let the second white.
  -Click 'apply '.
  -Finally, plug the Internet line, restart the router and the test.

• HP Photosmart Premium C309g do not print black ink

  Hello

  My HP Photosmart Premium C309g (CD055A) will not print black ink even if the cartridge is full. He's going through the motions of printing but the pages come out blank. It prints colors, they are not as dark as before, so I know that black is not working. I have cleaned the print heads, turned off the printer, unplug the printer, restarted the computer, but nothing works. I get colors on the report of the print quality, but the printer status report comes out blank. I bought a new black ink cartridge (564XL) think the previous one was defective (levels showed a 75% ink) but I still have the same problem. Any suggestion would be appreciated. Thank you.

  Hey,.

  I see you have done some troubleshooting on the issue of the print quality that you are experiencing.  I would make sure you did all the troubleshooting steps available for your research problem in the document following the link.

  Print colors are the colors should not when the C309 Photosmart Premium printing.

  If you have completed all these steps, then I check the status of your printer warranty.  If it is out of warranty, you should consider the solution provided by Bob_Headrick in the thread found here.

  Hope this helps,

  Jason

• Extremely slow printing wireless with HP Photosmart Premium C309g-m

  I see extremely slow print speeds when printing from a Mac or a Windows XP system on a new printer HP Photosmart Premium C309g-m wireless. The printer starts printing immediately when I request a print, but it only prints one line. It will take about 15 minutes then to print the rest of the page, each print after a very long break line. Print demo page doesn't exhibit this problem, only documents of programs such as Word 2008, Safari, and Firefox (I tried firefox on PC and Mac) are affected.
  
  If I connect to the printer via a USB connection it prints very well, so this problem seems to be the only wireless printing.
  
  Printer: HP Photosmart Premium C309g-m
  Computer: Mac mini (late 2009 model) (also tried a Windows XP laptop, by comparison using the latest drivers from the HP website)
  OS: Mac OS X 10.6.2 with all available updates installed
  Method of connection: cable Ethernet connection to the router wireless
  Printer drivers: version 2.2.1 (Apple provided, drivers HP never installed as system comes with 10.6)
  Wireless router: Apple TimeCapsule (early 2009) 1 TB, honing a/d and modes of b/g on 2.4 and 5 GHz. TimeCapsule is in transition as the DSL modem handles DHCP service mode
  Encryption: WPA2 Personal, no MAC filtering or hide the SSID.

  IP addressing scheme: all addresses are distributed by the server DHCP without reservation of any kind

  The TimeCapsule is sitting three inches from the printer and the printer indicates the complete signal. Connecting the printer to the wireless network and setup of the printer on the Mac went off without a hitch. Only when you print a test document discover us the problem. The wireless network will behave as expected when you access Internet from Mac and Windows devices (tested with a laptop computer Dell XP and a MacBook with OS X 10.6.2), so I don't see any problem with the wireless network together.
  
  Attempt to use:
  1 reboot and power off, wait, restart the computer
  2 reset the print subsystem, the printer off and on again and reinstall the printer

  3. disconnect the power to the printer and let it sit for several minutes before trying to print wireless.
  
  None of them worked.

  I don't know exactly what is happening... I'll have to think about.

  Looks like you're running with the current configuration.

  Can we call this resolved?

• Photosmart Premium 309 a won't print black

  My Photosmart Premium 309 a printer will not print black text. Just imagined colors.

  I tried new cartridges (twice - at great expense!) head cleaning, cleaning deep head, aligning the head and tried to soak the printhead in hot water several times now and then cleaning and deep cleaning again and then yet another new series of cartridges, still no black - not a pinch!

  Would it be a mistake to electrical connection with the contacts? Or is the print head itself a goner - seems such a simple plastic device, ok electronics in contacts can be more complex, but not much to go wrong.

  I don't think I have done something to damage the print head when the occurreed first problem, but with all the plug and put back and soaking in hot water (let dry naturally) I can't guarantee that it is not damaged because, although I was careful and everything seems ok.

  I am also puzzled as to where ink is going on because the black cartridges I used trying to solve this problem have certainly been empty but the ink is not reaching the paper - looks like the blooming thing could swim ink now but it seems pretty clean!

  Any advice welcome.

  Hi @StuartG48UK,

  Welcome to the Forums of HP Support! I read your post and see that the black is not printing. I want to help you.

• HP C410a Photosmart Premium: bad printing quality on the picture

  Printer HP Photosmart Premium C410a, just replaced all THE cartridges (genuine HP) - he always tells me cyan and magenta are weak, but the test page printed fine and I cleaned the print heads. When I print a picture (of the program Apple Photos) the ink begins to blurr and run. It is a new problem, all worked well.

  Hello and welcome to the community of HP @BevA1,

  I understand that you encounter some problems print quality when you print pictures of your HP Photosmart Premium C410a. I will do my best to help.

  Below, I've posted a link to a document that offers solutions of troubleshooting on this issue. Please try all the steps in order and get back to me with the results.

  Problems with print quality setting for the HP Photosmart Premium Fax all-in-One Printer Series (C410a C410b, C410c, C410d, C410e)

  If this help will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• Photosmart Premium c309g-m: cannot print from word and excel files

  Hello

  My question previous (25/02/2016 09:44) problems with the HP Solution Center has been resolved today - I can open the program and I can scan.

  But now I can not print word and excel files - the paper is completely empty. I can print emails from google, but they are difficult to read.

  In Control Panel, devices and printers, I have until now had a HP printer: HP0BAC44 (HP Photosmart Premium C309g-m) but now I also have the printer: HP Photosmart Premium C309g-m (Standard). Who would have something to do with the problem? I tried printing from two of them, but the result is the same as mentioned above.

  Can you help me please?

  Thank you

  Peter S.

  Hello

  Bought a new printer (Envy 5646), and all my problems are solved.

  Thank you

  Peter S.

• printer photosmart premium c309g set up failed

  My HP photosmart premium c309g (wireless connected to the network) is visible on my laptop but not on my computer by cable with windows xp, at least not by the HP software I have installed. When I enter the ip address of the printer in my browser on the xp machine, it opens the Web page, and everything seems fine.

  When I add a new device with the HP software it saids "printer is detected", but after a while, I get the message: in Dutch: het instellen van printer is mislukt, translated into English (I Think) "the implementation failed.

  The printer used to work on the computer. I don't know what I did so that it stops working. To solve the problem, I uninstalled the software and installed it again. The problem still exists.

  I tried the hp doctor. The printer does not appear. (The software showed a usb printer which was not connected at all)

  Is there a solution?

  Thank you

  Hi adst.

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-73652-3&cc=US&DLC=en&LC=en&os=228&Product=3793676&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-73652-3&cc=US&DLC=en&LC=en&os=228&Product=3793676&sw_lang=

  10. run the download to reinstall the printer

• Impossible to print a Web page using photosmart premium c309a using Internet Explorer 9.

  I just installed Internet Explorer 9. Now, I can't print a Web page using my network photosmart premium c309a. I also have a Photosmart c6250 networked and I peut print for her. What gives? Am I missing something? I know that this is a known problem by searching the problem and Windows solution does not help.  I have no problem with the c309a print when I go to the internet, it's just a problem of Web page with IE9.  All/any help would be appreciated.

  HP helped me by making me install a different driver. Download and install the printer driver 6980. After installation, go to the printer properties and add a new Standard TCP/IP port and use IP address for the c309a.  I don't think I'm missing something, but I received the information from their chat support.  Then, when you want to print from IE9, choose the 6980 printer (which is actually the c309a printer).  This HP support doesn't help.  You must talk to a living person who knows something about printers.

  I hope this helps.  In fact, I switched to Mozilla Firefox as my default long ago, and it works very well with the c309a printer.  I only got this solution because I could be chatting with them on another printer and I mentioned that I could not print from IE9.

• compatible product for printer / photosmart premium to individual ink colors

  Can someone suggest and similar for the best as a replacement for my printer photosmart/premium.

  Also is there all of the printers that use individual inks as I believe that these new lights to be expensive cartridges.

  Thank you

  Hi @morrisminor

  What Photosmart model did you have before? There are different printers IIC (individual ink cartridges) at the present time, all depends on what additional features you are looking for.

  Mainly interested in photo printing, or a mixture? Many of the new printers Officejet IIC are very good. Check out the Decisionator...

  No matter what q to all please come back and I'd be happy to help you

  Ciara

  http://WWW8.HP.com/us/en/ads/ink-decisionator/overview.html