QuickWeb Probook 4420 to s

Similar Questions

• ProBook 4420 s - BIOS update failure - Windows 8.1

  Had a bad HDD then I've upgraded to a new SSD with Windows 8.1 after doing so. I decided to update the BIOS.  I've updated the BIOS through Windows and restart that the laptop would not start.  All I saw was a white wireless LED and LED power.

  I have tried the 'Windows key' + 'B' of the BIOS recovery method, but when I do that. I'm white power LED, amber and continuous wireless LED blinking LED white "Caps Lock".

  I used the steps here: http://forums.mydigitallife.info/threads/870-Bios-Recovery-Procedures/page79?p=398310&viewfull=1#pos... and the laptop go through the steps, but I am still living with a white screen.

  Any help would be appreciated!

  ProBook 4420 s

  Product #: WH291UT #ABA

  I was able to bring back the dead laptop computer by following the instructions in the link I posted and the version of the BIOS F.20.

  After the upgrade laptop computer and running; I've updated the BIOS F.21 using a USB key and it worked without a hitch!

• HP ProBook 4420 s: TouchPad disable indicator does not work

  Hi, I have a HP ProBook 4420 s-Core i5 laptop.

  My TouchPad indicator which located in the corner top left of touchpad & scroll is to the right of it, does not work after installing Windows7 operating system.

  Need to do to enable this feature?

  I desperately need to solution because I can't write anything in MS Word, Excel or etc. because, now, it is. When I write something, a part of my hand touched the pad and the cursor goes different places which creates difficulties.

  Would be grateful if you kindly give an easy solution for this.

  Thank you very much

  Thank you very much.

  Please note that my current operating system is windows 7, and is system type: 32-bit operating system.

  In this case, suggest you to install again to activate/solv my TouchPad disable indicator promlem?

  It will be good enough if you tell me, what is the problem of the current operating system.

  Also please tell me what is HP ProBook 4420 s Synaptics Touchpad Driver

  Waiting for your valuable advice.

  Thank you for you support.

• Problem of Ram 8 GB / 1333 Mhz with HP Probook 4420 s Core i3

  Recently, I bought a new module of memory 8 GB Transcend and installed in my laptop HP Probook 4420 s Core i3. The operating system does not start then. Tried to reinstall the operating system, but the installer crashes. Whenever I try to run a memory test, a few glimmers of strange color on my monitor test and memory freezes.

  I if the memory was faulty, and tried to install on an ACER Core 2 Duo laptop and it worked very well, ran different memory test and it passed.

  One last thing, when I install memory with my old 2 gb 1066 mhz ram, the system accepts it and the operating system starts. But when memory consumption exceeds 2 GB, the system hangs.

  Simply, the memory is not usable in my system. What's wrong!!

  I use Ubuntu 13.04. Tried with Microsoft Wiindows 8 and Windows 7, and the results are the same.

  @ Banhien

  This is not what the plug or the manual say.

  

• S HP QuickWeb ProBook 4530 on Setup

  Hi all

  I want to configure my HP QuickWeb ProBook, but I find everything 'Instant-On' or QuickWeb options on my system Bios Setup.

  I have my bios to the latest version in v2.1.

  I have a "Fast Boot" option, but it is disabled, with the message "seting Divelock password or enroll users... desactave Fast Boot.

  Wat can I do to configure my QuickWeb.

  Thank you

  "but I find"Instant-On"or QuickWeb options on my system Bios Setup.

  I guess I misunderstood your statement

  Your manual says there is a Quickweb button 

  Home page for your model

  http://h10025.www1.HP.com/ewfrf/wc/product?product=5060881&cc=us&DLC=en&LC=en&query=ProBook%204530s&tool=

  

  .

  Button n ° 2 or Quickweb Button

  .

  

• Administrator Bios password does not work on HP 4420 s XT940UT #ABA Windows 7 64-bit

  Someone please help me with this!

  I bought this laptop from a friend (have receipt) who sell it to me because the screen was cracked and spidered all out when you the activated. And everywhere he went to ask to get the screen fixed it is very expensive ($250 - $350) and he said that it would be just a newer laptop. So he sold me this which is a model Probook of HP4420s XT940UT #ABA. About a week after I bought this Probook friend who sold it to died me suddenly. It was sudden and terrible. Some time later, I had the time of the purchase of the LCD for this model, replace it myself (was very easy actually) and booted up the laptop with a new installation of Windows 7 Professional 64-bit Edition. After installing all my software and using the laptop for a while now, I wanted to get into the Bios that I've never done. So when I started the laptop, click ESC, then F10 to enter the BIOS, there were two places to enter a password is different then all Dell I've ever owned. One was mine I guees I put in place using HP protect tools and the other says BIOS/administrator. Well I can do most of the changes with the one I put in place with my password but my password does not work, nor can I get in some very significant changes that I wanted to do using Bios/administrator, as kindling the LoJack, namely the blocking of the hard drive etc. , turning on turbo boost, fan, etc. Well, since the person I bought is no longer with us, there is no one to turn to the answer to this question of administrator/BIOS password / problem.  I tried to take battery Rtype and restore that way, didn't work. Several times, I called HP and they sent me to a BIOS page to download the same BIOS, I have already, would not let me install it. When I bring up the command prompt and do not put anything in BiosConfigureUtility.exe happens, said just a wrong command. When I try to enter the BIOS through the C: file in the files of the SSM, I reach the BiosConfigUtility.exe file, click on it to open it and it just flashes a way small order page to fast to read what it says. I would like to have complete control over my laptop thinking I have a lot of time and money invested in it now. The problem would have something to do with installing the 64 bit version of Windows 7 instead of the 32 bits I suppose initially that he came with? I have all the manuals and they say that this laptop is compatible with Windows 7 Ultimate 64 bit Pro is what I installed. I'm mixed responses from many different people on this and would like an answer from HP someone who has experience in dealing with the BIOS in the Probooks business models if possible please. I really like this Probook and have since become big fan of most HP, Dell and Lenovo.  I intend to buy two probooks, one for my wife and one for my daughter because this one is like a MacBook, but better.  Thank you for reading this and I hope someone can help.

  Model: HP Probook 4420 s

  Type: XT940UT #ABA

  Operating system: Windows 7 Ultimate

  BIOS version: 68AHHH Ver.F.20

  SM BIOS Version: 2.6

  Hardware Extraction layer: Version 6.1.7601.17514

  Once you open a session with the service the customer of HP one case of pension, they will provide once the utility you and steps to execute it. who can capture the UUID. BTW - UUID is a unique ID for each machine (16 digits or more) stored in the BIOS itself.

  Once the results of the utility (UUID and other info) in the log file, shared with HP, they can generate a key file (SMC) to reset.

  Well, depertment of technical support can help you in it, no need to ask for anyone in particular or the Department.

  It will be useful.

• After the upgrade 320 GB sata 7200 RPM to 256 GB transcend drive ssd

  my computer information are:-

  1 probook 4420 s (14 ')

  2 processor 2.27 ghz-core i5 430 m first generation (3 MB cach-64 bit)

  3 ram 8 GB 1333 bus (after upgrade)

  4.OS - windows 8.1 pro 64-bit.

  5.HDD - 256 GB transcend ssd after upgrade (after was Hitachi 320 GB 7200 RPM)

  _______________________

  My Question is...

  1. I used HP 3D guard player when use Hitachi 320 GB 7200 RPM HARD drive.

  NOW, I want to know to use 3D software guard drive after upgrade SSD HARD drive?

  3d can damage the SSD or custody of drive?

  because after upgrade windows 8.1 Pro, in Device Manager it show unknown device '? After installation 3d player it keeps show OK. !

  That's why I want to know is - this safe for the SSD or not?

  Hello

  There is no need in fact HP 3D DriveGuard for one SSD as there are no moving parts - this application is not relevant to a mechanical hard drive, where sudden movements, detected by the accelerometer cause the drive heads be "stored" in damage to storage media.

  However, as your machine has an "accelerometer" leaving this driver installed will not affect the function of your SSD and prevents the Device Manager appears an 'unknown device '.

  Kind regards

  DP - K

• internal 601 battery error

  I have a HP Probook 4420 s. I get error 601 internal battery, so Im ready to replace it. Can someone let me know where I can find one?

  Hello

  The 601 error relates to your main battery of notebooks (not the cmos cell as the message says) - there are many retailers, including HP, where you can buy a replacement as in the example on the following link.

  http://www.Amazon.com/Compaq-ProBook-battery-4400mAh-replacement/DP/B004Z6A8KM

  Kind regards

  DP - K

• Original image has disappeared I think off the hard drive and the BIOS password set up does not work?

  Someone please help me with this!

  I bought this laptop from a friend (have receipt) who sell it to me because the screen was cracked and spidered all out when you the activated. And everywhere he went to ask to get the screen fixed it is very expensive ($250 - $350) and he said that it would be just a newer laptop. So he sold me this which is a model Probook of HP4420s XT940UT #ABA. About a week after I bought this Probook friend who sold it to died me suddenly. It was sudden and terrible. Some time later, I had the time of the purchase of the LCD for this model, replace it myself (was very easy actually) and booted up the laptop with a new installation of Windows 7 Professional 64-bit Edition. After installing all my software and using the laptop for a while now, I wanted to get into the Bios that I've never done. So when I started the laptop, click ESC, then F10 to enter the BIOS, there were two places to enter a password is different then all Dell I've ever owned. One was mine I guees I put in place using HP protect tools and the other says BIOS/administrator. Well I can do most of the changes with the one I put in place with my password but my password does not work, nor can I get in some very significant changes that I wanted to do using Bios/administrator, as kindling the LoJack, namely the blocking of the hard drive etc. , turning on turbo boost, fan, etc. Well, since the person I bought is no longer with us, there is no one to turn to the answer to this question of administrator/BIOS password / problem.  I tried to take battery Rtype and restore that way, didn't work. Several times, I called HP and they sent me to a BIOS page to download the same BIOS, I have already, would not let me install it. When I bring up the command prompt and do not put anything in BiosConfigureUtility.exe happens, said just a wrong command. When I try to enter the BIOS through the C: file in the files of the SSM, I reach the BiosConfigUtility.exe file, click on it to open it and it just flashes a way small order page to fast to read what it says. I would like to have complete control over my laptop thinking I have a lot of time and money invested in it now. The problem would have something to do with installing the 64 bit version of Windows 7 instead of the 32 bits guess what it initially provided with?  Where can I find the UUID and what tech Department I would ask because if I have to call HP again and what other information should I have ready for them if you know? I have all the manuals and they say that this laptop is compatible with Windows 7 Ultimate 64 bit Pro is what I installed. I'm mixed responses from many different people on this and would like an answer from HP someone who has experience in dealing with the BIOS in the Probooks business models if possible please. I really like this Probook and have since become a big fan of most HP, Dell and Lenovo.  I intend to buy two probooks, one for my wife and one for my daughter because this one is like a MacBook, but better.  Thank you for reading this and I hope someone can help with more than one answer then GET AHOLD OF HP TECHNICAL TEAM. As I said, I did it.

  Model: HP Probook 4420 s

  Type: XT940UT #ABA

  Operating system: Windows 7 Ultimate

  BIOS version: 68AHHH Ver.F.20

  SM BIOS Version: 2.6

  Hardware Extraction layer: Version 6.1.7601.17514

  Jason,

  Sorry to hear about your friend and your problem.  The BIOS password cannot be reset without the help of HP.  They will need some information from your PC and increase your case.  I recommend you give them a call.

  -wes

• Installation of Windows 7 Boot from sd card

  So, I want to install 64-bit x on my hp probook 4420 s after all is to copy the windows setup files. and then start from an sd card.

  but after "windows is loading files" it stuck at windows startup

  can you guys help me with this problem

  :(

  Post proposed by the facilitator for the appropriate forum placed

  As in the ghost of the OS to another HD... Or boot HD option, if the latest, simply open the BIOS at startup the pc.

  reset the boot priority, set option HD as 1st boot priority. If you are attempting to clone C: another HD, then in

  Windows, go to run, type: diskmgt.msc in msc, R.click on the hard disk, delete the partition, the value to create one.

  format. Once through, out msc, go to run, type: XCOPY C:\*.* D:\/c/h/e/k/r

  fits all in the DOS window, if the reader is given another letter D: can use instead

• Turning on bitlocker issues.

  Problems with BitLocker.

  What I've done so far is activated using a USB key by running GPEdit.msc. From here on, I'm went to models of administration-> components-> BitLocker Drive Encryption-> operating system Windows readers-> require additional authentication at startup, which enabled and allow it BitLocker without a compatible TPM was already checked. Press OK and you leave.

  I used the windows Explorer, click with the right button on the system drive and chose to shoot to "Turn on BitLocker" and I get an error that says "a compatible trusted Platform Module (TPM) security device must be present on this computer, but a TPM module was not found."

  I've already prepared some suggestions for a very old post back in and by checking disable them on the template rebooted and then reactivated it but I still get the same error.

  I use Windows 7 64-bit volume license business on a domain.

  I used BitLocker successfully on many laptops so far, but no case of this model.

  USB devices are enabled at startup upward in the BIOS.

  The laptop is a HP ProBook 4420 s with 2 GB of RAM if it's important.

  Any help would be appreciated the employee wants his laptop in return.

  NCSP-Drew

  Hello!

  After changing the setting, you applied the GPO with gpupdate/force, and then disconnect & connect again?

  You can check the status of this setting with the set of resulting policies snap-in of MMC or see the group applied with gpresult/h report.html GPOs

• The upgrade of the wireless in my 4320 s card

  I live in England and have a probook 4320 portable s, product code XX826EA #ABU with a wireless card not compatible with my new network running Wireless N to 5 GHz.

  my network card is Ralink RT3090 802.11 b/g/n WiFi Adapter.

  Is it possible to replace my current card with one that would allow me to connect to my network at full speed instead of 54mbs and if so where specifically do I need?

  Hi, Kenny:

  Upgrade of a card in a HP laptop wireless, it's nothing less than a nightmare. It's a little easier on the business models, then you have chance but not completely safe...

  Here is the link to the service manual. I couldn't do that to download support and driver page.

  http://www.manualowl.com/m/Hewlett-Packard/ProBook-4420s/manual/105970

  Wireless cards supported with HP part numbers are in Chapter 3 begins on page 3-26 of the manual.

  Cards dual band...

  Intel Centrino Advanced N 6200, HP part # 572510-001. (40,66 GBP)

  Intel WiFi LInk 6200, HP part # 572509-001. (43,52 GBP)

  You can purchase a card online from HP on the link below:

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=EBF60ADD3B4D4DF2B5DF89B85B9D824A

  You can buy only one card in the maintenance manual and it MUST have the HP part # on it, or it won't work.

  So, if you decide to go around, check to the map you get is made specifically for HP with this number of the piece on the subject, or your laptop will not RELEASE yet.

  Paul

• HP ProBook 4530 s Quickweb does not

  HP ProBook 4530 s

  Windows 7 Edition Home Premium 64-bit

  The BIOS 501 error

  I have Installled Windows 7 on drive C: (NTFS)

  then installed QuickWeb.

  Tried to use QuickWeb gives error BIOS 501

  then installed on drive (FAT32) tools Hp QuickWeb

  Once again same error Bios 501

  Can't understand the problem can someone help me...

  Thank you very much in advance.

  Welcome to the HP Forum!

  dbk3110 wrote:

  HP ProBook 4530 s

  Windows 7 Edition Home Premium 64-bit

  The BIOS 501 error

  I have Installled Windows 7 on drive C: (NTFS)

  then installed QuickWeb.

  Tried to use QuickWeb gives error BIOS 501

  then installed on drive (FAT32) tools Hp QuickWeb

  Once again same error Bios 501

  Can't understand the problem can someone help me...

  Thank you very much in advance.

  You said that you have installed Windows 7 in the C: partition

  Was that a factory image install via the Recovery Manager, or was it a facility own fom a Microsoft dvd installation?

  The error you are getting means that the UEFI system partition problems. Can still call you the Diagnostic tools to the power upward with the F2 key? If this isn't the case, you must reinstall UEFI. Follow the installation instructions.

  The software is available here at the web support portal users for your ProBook s 4530..

  Kind regards
  ERICO

• Reset bios password on probook 6555 b

  works fine but can not access bios if necessary

  Wig.

  There is no main password for ProBooks or EliteBook generators.

  You will need to contact HP.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html?JumpID=reg_r1002_usen_c-001_title_r0003

  Or look at this link.

  http://forums.mydigitallife.info/threads/49497-HP-ProBook-EliteBook-BIOS-password-reset-utility

  Or replace the BIOS chip.

  http://www.eBay.com/ITM/HP-ProBook-4320s-4420s-4520s-4525s-4720s-6450b-6550b-6555b-BIOS-chip-no-password-/251583737868?PT=US_Motherboard_Components&hash=item3a938f300c

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  The error you mentioned does not match the description of the usual Windows blue screen errors. When I put this error for a web-search, it has proved to be a common problem with some HP computers. I was able to get my hands on the following link for a thread in HP communities that contains information about this error. Have a read of the content in this link and see if this applies to your situation:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/HP-6730b-quot-BIOS-application-error-501-quot/TD-p/1075640

  Windows errors blue screen looks something like this. If you receive these errors, let us know about it as well as the complete info you see on the screen. And the error you mentioned in your initial post, I guess that the HP support forums would be a better place to discuss. Here is the link to the HP support forums:

  http://h30434.www3.HP.com/