R [52] Description of bad ram online?

Similar Questions

• Kernel Panic #2 and another batch of bad RAM?

  OKAY this is getting annoying. A few days ago, I posted about a previous kernel panic and if it linked to the bad RAM.

  My question has been answered by Illaass and Grant Bennet-Alder, the culprit in my kernel panic was bad RAM as Illaass noted

  The expression '6 banks to report errors' panic report almost always means bad RAM.

  The key is to several banks of error reports.

  Also the phrase "Machine Check" usually means a hardware problem

  I got the replacement RAM this morning and installed, the system showed as having 12 GB for about two hours. I got a Kernel Panic OTHER then when I rebooted my machine showed as having 8 GB of RAM once again, the two new modules have been installed would not be saved. -I opened the side of my machine to instept memory, I was surpised to find the error LED on one of the DIMMs I had installed just a few hours before.

  I have therefore three options in front of me.

  1. I received a second faulty module in the modules that I replaced, but what is the probability that I would get two modules of the 'bad' like this.

  2. the second is of course the DIMM location on riser from the Mac Pro RAM "kills" any module installed in it. (I don't know what is the probability of this)

  So I contacted the dealer that I bought the memory with a few basic troubleshooting I've been able to identify the faulty module and remove (and the other 'good' module of my system), with the deleted modules my system boots and behaves correctly, with replacement modules in my system boots (slower than normal) and new modules do not even register System Profiler , they show that slots "empty."

  I took my machine to my local provider of Apple and asked their opinion, they said that it is very unlikely that the slot is the question and I just received two faulty memory sticks.

  I contacted the retailer and they will send me another one module replacement, but I don't know what the probability of exactly the same thing repeats again and again.

  I also have the details of my second kernel panic which I attach to this message in a minute, I'm open to suggestions as to what can happen.

  Fri Jun 17 14:13:28 2016

  panic (cpu 0 0x8a1d1e8b appellant): "error memory Fbd incorrigible detected. FERR_NF = 0 x 00002000, NERR_NF is 0x02002021\n"@/SourceCache/AppleMCEDriver/AppleMCEDriver-119.4.0/AppleMCEDriver .cpp:947

  Backtrace (CPU 0), Frame: return address (4 potential args on stack)

  0x10bc58: 0x21b837 (0x5dd7fc 0x10bc8c 0x223ce1 0x0)

  0x10bca8: 0x8a1d1e8b (0x8a1d290c 0 x 2000 x 0 2002021 0x8100a4)

  0x10bd18: 0x8a1d215d (0 x 12654500 0 x 12654500 0 x 2 0 x 820044)

  0x10bd98: 0x7fda0a50 (0 x 12654500 0 0 0x117f1880 x 0 x 0)

  0x10bdc8: 0x7fd9fd09 (0x1141f200 0 x 0 0 x 0 0x1c)

  0x10bde8: 0x7fdaeebc (0x1c 0x10be5c 0 x 8 0x7fdac5f0)

  0x10be18: 0x7fdaf0be (0x117d391c 17 0x1141f53e 0 x 0 x 0)

  0x10be78: 0x7fdb662e (0x112ecd28 0x10bec8 0x10bef8 0x0)

  0x10be98: 0x56ac20 (0x112ecd28 0 0 0x112cad80 x 0 x 0)

  0x10bee8: 0x7ffad5bb (0x1141f280 0 0 0x1141f280 x 0 x 0)

  0x10bf18: 0x7fd93213 (0x117c8600 0 x 0 0 x 0 0 x 49)

  0x10bf38: 0x7fd9e911 (0 x 49 0 0 0x10bf78 x 0 x 0)

  0x10bf58: 0x580d96 (0x11329b80 0 x 0 0x11329f80 0 x 49)

  0x10bf78: 0x2ab432 (0 x 49 0x8941ba50 0x1c8db 0 x 1)

  0x10bfd8: 0x2a1c2e (0x8941ba50 0x2a2a00 0 x 0 0x2a2a5b)

  0x8941bae8: 0x225bba (0x84bf3c 0x2d6586f7 0x85c 0x84bf28)

  0x8941bb48: 0x22698c (0 x 1 0x141873d4 0x112c4c58 0x85c)

  0x8941bbb8: 0x2275b0 (0x141873f0 0x141873f0 0x8941bc18 0 x 233203)

  0x8941bc28: 0 x 227654 (0 x 0 0 x 0 0 x 0 0 x 0)

  0x8941bc48: 0x2a1422 (0 x 0 0 x 0 0xdd 0 x 80000002)

  0x8941bcd8: 0x260c62 (0x2199ede8 0 0 0x2a45e3 x 0 x 0)

  0x8941bde8: 0x25847e (0x8941bf40 0x63e14000 0xd2a 0 x 3)

  0x8941bf38: 0x2ab83c (0x121d5d74 0x63e14000 0xd2a 0 x 3)

  0x8941bfc8: 0x2a18da (14184204 x 0 0 x 0 0 x 10 0 x 0)

  Extensions of kernel in trace (with dependencies):

  com.apple.driver.AppleMCEDriver (1.1.9) @0x8a1ce000-> 0x8a1d3fff

  dependency: com.apple.iokit.IOACPIFamily (1.3.0) @0x7fad4000

  com.apple.driver.AppleAPIC (1.4) @0x7ffac000-> 0x7ffaefff

  com.apple.driver.AppleACPIPlatform (1.3.6) @0x7fd91000-> 0x7fdd3fff

  dependency: com.apple.iokit.IOACPIFamily (1.3.0) @0x7fad4000

  dependency: com.apple.iokit.IOPCIFamily (2.6.5) @0x7fcda000

• Blue screen and bad RAM memory?

  My MBP 2011 early all just stopped working yesterday, it worked very well without any problem of performance for the last 5 years, and then suddenly a blue screen (of death) and it has problems starting.

  He will ring the Bell to start, display the bar loading and Apple, and then there will be a glitch on the big screen (horizontally) 1 inch above the Apple, after that, the fans speed up and all that I see a gray screen, not user interface.

  I zapped the PRAM/MSC and tried the unique memory sticks, I have no spare RAM on hand, but who will order soon.

  Tips to solve this problem?

  AHT says this - 65/4MEM/4000000000: 0x84f6f918

  Google says it is bad memory

  Here is the BSoD:

  

  I think you have a problem of memory, although if your MacBook Pro 15 or 17 inch, you should consider video issue as well now.

  http://www.Apple.com/support/MacBookPro-videoissues/

• How will I know if I have a bad RAM or bad treatment or a bad hard drive?

  Hi guys I recently opened my laptop for cleaning fan and so I disassembled it and I just noticed that the thermal paste is pretty bad, so I replace and apply a new thermal compound can clean the vents, then I put the laptop back together, then what happens is that when I copy the files it takes me a lot of time I reinstalled windows , then what is happening is that it's always the same thing how do you know and what are the factors which makes it slow during the copying thanks for help

  Here is my card

  Intel pentium dual-core [email protected]

  toshibamk3255gsx ata hdd

  2 x 1 GB ddr2 800 mhz ram

  test of Windows 7 ultimate 32 bit

  Yep

  We need a willing participant :/

  Not that she'll show us everything that isn't in the original post, but can at least help the op get a new version :)

  http://www.CPUID.com/softwares/CPU-z.html

  He may have followed the instructions of shots image download and screen well :)

• Ubuntu reports bad RAM?

  Yesterday, I upgraded my Netbook to 2 GB of RAM. Windows XP recognizes all the new RAM.
  Today, I restored to Ubuntu - Ubuntu shows only 883 MB of RAM in the system monitor.
  Is this a bug in Ubuntu, or is there something else I need to change to recognize all the 2 GB?

  Resolved - after that updates installed the correct now shows RAM.

• Satellite A100-250: A value of bad RAM

  Hello

  I have a Toshiba a100-250.
  In addition to the 512 MB ram module, I bought a 1 024 MB module to boost it up a little bit. They are running and DDR2 at 533 mhz. Now the problem is that my computer laptop doesn´t recognizes the two modules.

  I was just curious and exchanging modules and put them separately or together in different locations, but it doesn´t find 1 024 MB module if both are put in place or module 512 if I do not put one inside.
  I updated my bios 2.10 BU he doesn´t solve the problem. Can please help me because now I have a 512 MB module which is useless.

  Thanks in advance!

  Hello

  Are you sure you bought a 1 024 MB module at 100%?
  Because it sounds like the new module of memory has only 512 MB.

• I have a Macbook Pro, with Yosemite.  I want to buy desktop software but so many bad reviews online.  Should I buy 2011 version instead?

  I have a Macbook Pro 2014 and I use OS 10.10.5 (Yosemite).  I have an older version of Office (2008) and you want to upgrade.  But I saw a lot of bad reviews of the version of 2016.  Should I buy the 2011 version or the version of 2016?  I mainly use Word and Excel sometimes.

  Initially, there are problems with Office for Mac 2016 and El Capitan, but those who seem to be resolved.

  I myself would get 2016 later if I wanted an Office for Mac.

• Photoshop cs 5 bad RAM memory

  No happy feeling on my new PC and how to behave (LeRiz) plugins I decided to add another memory to 8 Gig RAM to my totaaling 4 12G. I thought it would make things got super speed but to my surprise it actually slower fel.

  I went to-> Preferences-> performance and checked my meory usage and my problem seems obvious. That Photoshop does not show that I added memeory and think that I only have 4 Gigs. How can this be? How can I let Photoshop know that I have more memory than what he thinks I have?

  Thanks in advance

  Mich

  OS: Windows 7 Home Premium 64-bit

  Photoshop CS5 32/64-bit

  32-bit applications are unable to use more then 4 gigabytes of ram, so if you use the 32-bit version you can only see the possible 4 gigs max ram, like the poster above, use the 64-bit version of Photoshop and you get more ram available for use.

• HP Pavilion - 15-ab101ax: HP Pavilion 15-ab101ax Ram Max

  Hello I'm new to the forum.

  Im not a genius when it comes to computers, but I know a reasonable amount.

  OK so here's some info on my system that should help:

  HP Pavilion - 15-ab101ax

  Product ID: p3c85pa #abg

  Processor: AMD A8 - 7410 APU with AMD radeon r5 2.20 ghz graphics card

  Currently 8 GB of Ram

  Windows 10 / 64-bit (not that it's important)

  Basically, I want to upgrade my ram and I was wondering:

  1 - What is the maximum amount of ram can be installed.

  2 - what kind of ram (I could understand this by integrating the stick existing an it specialist?)

  3 - How many ram slots in my machine (of course I'll know when I install the new ram)

  I know 3 is not particularly important but just so I can judge how bad pass on one or 2 sticks of RAM.

  (I would rather order RAM online and receive it befor my laptop I SEPARATE.)

  Hello

  1 & 3:

  Two SODIMM slots - NOT customer accessible / expandable
  Support for the Single Channel DDR3L-1600 (Carrizo-L)
  The DDR3L-1600 Dual Channel (Carrizo) support
  Supports up to 16 GB of RAM in the following configurations:
  ● 16384 MB total system memory (8192 × 2)
  ● total system 12288 MB memory (8192 × 1) + (4096 × 1)
  ● System total of 8192 MB memory (8192 × 1.) or (4096 x 2)
  ● total system 6144 MB memory (4096 x 1) + (2 048 × 1)
  ● System total of 4096 MB memory (4096 × 1.) or (2048 x 2)

  2 as indicated above, it is better to get a Pro to do it for you. If it is still under warranty, you need an HP authorized service provider parts

  Kind regards.

• HP 15-r084ng Notebook PC: ECC or non - ECC RAM?

  Hello.

  It is my information of product here.

  I searched but I can't find the information online anywhere, including at HP. I am eager to increase the RAM of 4 GB to 8 GB.

  Could someone please inform me if this product has ECC or non - ECC RAM?

  I don't want to just buy the bad RAM or mingle ECC non ECC.

  Thank you.

  Concerning

  Hello

  You must use NON-ECC Unbuffered 1.35v

  Computer memory upgrades for HP - Compaq HP 15 SSD series HP 15-r084ng crucial

• Bad Pool Caller error (Windows 8) - including the link to my Minidump file

  Hello!

  I recently received 4 blue screens; the first three were probably related to Avast, so I uninstalled ( Memory_managementerror)

  Later, says error Bad_Pool_Caller

  I have already travelled through further discussion, so here is the link to my Minidump file

  https://www.dropbox.com/s/sinr1qwyjjj43qw/dump.zip

  Also, here are the results of WhoCrashed

  
  

  Thank you very much!

  
  

  (Local) information system
  computer name: KISS
  Windows version: Windows 8, 6.2, build: 9200
  Windows dir: C:\Windows
  CPU: GenuineIntel Intel (r) Core i7-3630QM CPU @ 2.40 GHz Intel586, level: 6
  8 logical processors, active mask: 255
  RAM: 21425922048 total
  VM: 2147352576, free: 1917325312

  Crash Dump Analysis
  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Wednesday, October 29, 13 16:57:33 this computer crashed
  crash dump file: C:\Windows\Minidump\102913-8937-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7A040)
  Bugcheck code: 0xC2 (0x7, 0x11C1, 0x11AC6DA0, 0xFFFFFA8011AC6DB0)
  Error: BAD_POOL_CALLER
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that the current thread is doing a bad pool request.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, October 29, 13 16:57:33 this computer crashed
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: gdi32.sys (GDI32! D3DKMTPresent + 0xA)
  Bugcheck code: 0xC2 (0x7, 0x11C1, 0x11AC6DA0, 0xFFFFFA8011AC6DB0)
  Error: BAD_POOL_CALLER
  Bug control description: This indicates that the current thread is doing a bad pool request.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: gdi32.sys.
  Google search: gdi32.sys BAD_POOL_CALLER

  Wednesday, October 29, 13 12:15:41 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\102913-13828-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7A040)
  Bugcheck code: 0x1A (0xFFFFF70001080000, 0x1C03, 0 x 5003, 0x1C0400003846)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.

  
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, October 29, 13 11:42:59 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\102913-23578-01.dmp
  This was probably caused by the following module: ntfs.sys (Ntfs + 0x40C90)
  Verification of error code: 0 x 24 (0xFFFFF8800ACAE0C8, 0xFFFFF8800ACAD900, 0xB50019060B, 0xFFFFF8800197C552)
  Error: NTFS_FILE_SYSTEM
  file path: C:\Windows\system32\drivers\ntfs.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT file system driver
  Bug control description: This indicates there is a problem in the NTFS file system.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Tuesday, October 28, 13 18:22:31 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\102813-13562-01.dmp
  This was probably caused by the following module: dxgmms1.sys (dxgmms1 + 0x263E7)
  Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF880049B53E7, 0xFFFFF8800975A4E8, 0xFFFFF88009759D20)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
  file path: C:\Windows\system32\drivers\dxgmms1.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: DirectX Graphics MMS
  Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Conclusion
  5 dumps were found and analysed. A third-party driver has been designated to be the cause of breakdowns of the system on your computer. It is strongly recommended that you check the updates for these drivers on their corporate Web sites. Click on the links below to search with Google for updates these drivers:

  Gdi32.sys

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP!  
  If you don't know what it means that you're probably not

  1-Memtest. (You can learn more about running memtest here)
  Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Get it here
  Boot from the CD and let it run at least 5 or 6 passes.
  Remember, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  Test the sticks individually and if you find a good, test it in all slots.

  If a well-known stick fails in a card mother slot but not an another is probably the slot.
  
  
  2-Driver Verifier (for full instructions, see our wiki here)
  Using Driver Verifier is a dubious proposition.
  Most of the time it will crash and it will tell you what is the driver, but sometimes, it will crash and will not tell you the driver.
  Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.

  I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems.
  Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
  
  Here is the procedure:
  Go to Start and type "auditor" (without the quotes) and press enter
  Select "create of the custom settings (for code developers)" and click "Next".

  Select "Select individual settings from the list complete" and click "next".
  Select all elements EXCEPT FOR "Low Resource Simulation"
  Do not check to win 8 Concurrency stress test and the verification of the conformity of DDI, click "next".
  Select "Select the driver names from a list", then click on "next".
  Select all drivers NOT supplied by Microsoft, and then click "Next".
  Select 'Finish' on the next page.
  
  Restart the system and wait as he crashed to blue screen.
  Continue to use your system normally and if you know what are the causes of the crash, do it several times.
  The objective here is to get the system crash because Driver Verifier is stressing out the drivers.
  If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  
  If you are unable to Windows because it crashes too early, try safe mode.
  If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

• Mac Pro RAM, Audio, Bluetooth mouse problems

  I recently bought an Apple factory refurbished Mac Pro (end 2013) and replaced the three-chip RAM of 4 GB with 16 GB of Crucial two chips. Everything was great for the first two weeks. Then I started having a strange audio problem. Audio would become suddenly agitated. I disconnected and reconnected the speaker output and it would start working again. Finally, unplug the unit and plug the unit has stopped working (audio would eventually just stop working completely... zero sound with or without the speaker plugged in...) and I had to restart the computer.

  Then one day I noticed that only 16 GB of RAM showed up (I run own memory, so he's in my toolbar). I opened the machine and moved the two chips on the other side and when I rebooted, I got 32GB again.

  Then I noticed that when the audio problem came once again (he seems to be after the computer has been for a few hours or more) my Apple bluetooth mouse would disconnect and reconnect intermittently... ONLY when the audio starts to get restless again.

  I zapped the PRAM several times and now I get the 32 GB of RAM only after disconnecting the chips and MOVING them to another location, but not all the time. The audio port will begin to spoil, I reboot and I'm back to 16 GB.

  So, is it bad RAM? I removed a single chip and the audio problem still happens.

  Anyone have this problem? Apple Care suggested I bring it in the Apple Store, but I thought that I ask here before go this road, just in case there is a known issue.

  Thank you!!

  Rick...

  To establish if it is a RAM problem, remove 16Bb sticks and replace the original 4 GB sticks.

• 1333 RAM in a MacBook 1066?

  Hey all,.

  Last week, I got 8 GB 1333 RAM someonei Elpida to upgrade 2GB 1066 in my white 2010 MB. However, when I put in, the computer issues only with the standby light flashes (RAM error (I think). I have seen on several other places that will RAM down the clock to your bus speed, and the RAM is certainly not defective (I took it out of the friend said 2009 MBP 13 "with a screen recently broken, and there he had worked perfectly for a while). Anyone know what is happening or how to fix it?

  Thank you!

  What is going on? It's the bad ram.

  How to fix? Get the right ram.

  Sorry to be so blunt but Mac need exact ram spec, yours is not close. It might work using a single original chip of 1066 MHz and 1333 MHz but a chip it is doubtful, and it can be unstable. It will not work using the modules faster ram, no way, no how.

• Upgrade of RAM for Satellite A30 213

  After buying my satellite second hand I immediately found why it was for sale, the dreaded overheating.
  I cleaned the fans with compressed air and it worked fine, then my error fatal, flushed with success, I bought the RAM online and installed. It was recgonised by the system and I thought all was well until it has proved defective and crashed my operating system, no recovery was possible.

  An operating system later new XP (and £50 poorer), I'm ready to have another go, but I can't open the user manual on the Toshiba site.

  I want to get right to the RAM of a reputable suplier, but the specifications I have indicates only DDR RAM, does anyone know the full specification (pins etc) because I don't want to lose it all again?

  Hello

  Have a look here:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=7249&ft=m&St=3

  You need the PC2100 200 pin SODIMM (266 MHz) DDR modules.
  You can upgrade the Satellite A30 Ram up to 2 GB. This means that you can use the 2 x 1 GB module.

  I had a good experience using modules from Kingston.

  Welcome them

• Portege Z930 cannot start with installed RAM module

  My laptop Toshiba Portege Z930-108 has stopped booting with any module of RAM installed in the support.

  If I remove RAM module, laptop computer starts and works fine, but if I install any module of RAM (4 GB 1600 original or a new 4 1600 CL9 or 1600 8 CL11) the computer cannot start.

  The screen stays black and power led flashing two green and two orange and a few seconds later, 3G indicator also on blue.

  This is the only problem I have with this computer, but it's strange.

  I updated the BIOS to the latest version and the problem is not resolved.

  I tried to reset the hardware (http://aps2.toshiba-tro.de/kb0/TSB3B03J90000R01.htm), also I tried to reset the equipment with power button 30 seconds without battery but button without success.

  Any idea on this problem of strage?

  Kind regards
  Lito.

  I guess you used bad RAM or not fully compatible modules.
  It's the only plausible explanation.

  I recommend you to order the RAM modules recommended by Toshiba that are:

  4 GB DDR3 - 1600 PA5037U-1M4G

  2 GB DDR3 - 1600 PA5037U-1M2G