[R] Intel PROSet/Wireless event log Service stopped working. What is c? Please help me.

What log the events ofIntel PROSet/Wireless Service has stopped working? Please help me.

Hi Tariq.khan,

·         Exactly when you receive this error message?

·         Did you do changes on the computer before the show?

Follow the suggestions below for a possible solution:

Method 1: I was able to find a link from the Intel site, where the question seems to be addressed, I recommend you to go through the link given below where a users seems to have found the solution.

[R] Intel PROSet/Wireless event log Service stopped working

http://communities.Intel.com/message/69976

 

Method 2: I suggest you to check and clean the boot if the problem persists.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

http://support.Microsoft.com/kb/929135

 

Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned at step 7 of the article mentioned above.

Let us know if that helps.

Tags: Windows

Similar Questions

  • Error - the Intel PROSet/Wireless event log Service stopped working andwas closed

    Whenever I am re-booting, I get this error window:

    "Error - Service of Intel PROSet/Wireless event log stopped working andwas closed."

    It started a month ago. I can't tell at all what I did--except that I installed a router Linksys Cisco Wireless (802.11 N), replacing an old Netgear device (802.11 G).  My wireless feature works well and I really do not notice the effects to receive this error message.  I don't remember having this error immediately after installation of Linksys.  I "think" some time elapsed before the error started - but I don't re-boot often, so it could be related.

    I'm on Vista Ultimate OS, with Service Pack 2.

    Intel (R) Core (TM) 2 DUO CPU T9400

    Hello

    I was able to find a link from the site intel, where the question seems to be addressed, I recommend you to go through the link given below where a users seems to have found the solution.

    http://communities.Intel.com/message/69976

    Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

    However you can make the boot which would help you to cut down on the service that is causing this problem.

    To perform a clean boot on a computer that is running Windows Vista, follow these steps.

    1. click on start, type msconfig in the search box and press ENTER.

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after starting the computer, reinstall and run the program and see if the problem is resolved.

    Check if you have the same problem... If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

    http://support.Microsoft.com/kb/331796

    To restore your computer to a Normal startup mode, follow these steps.

    1. click on start in the box start the search.

    2. type msconfig and press ENTER.

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    3. click on the general tab.

    4. click on Normal Startup - load all device drivers and services and then click OK.

    5. When you are prompted, click on restart to restart the computer.

    Let us know if this helps

    Concerning
    Anthony.

  • Intel ProSet/Wireless Services event log has stopped working

    I get this message at the start and ran the diagnostics and the hardware failure for the Intel PROSet / Wireless. Help! Thank you

    Hello amaas1982,

    You can try to reinstall the software for the Intel PROSet / Wireless and see if that will help the issue.
    Download from the link here. You can also update all drivers and see if that helps.

    If you're still having problems, then after, I suggest that contact manaufacter for support.
    Click here to post your question in the Intel community forums.

    I hope this helps.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • DV7-6b75nr: Intel PROSet/Wireless Zero Configuration Service. Stopped working

    In the last days, I started to see this error in the Action Center reliability monitor. If I check "msconfig" / Services tab, in my view, it is running and a tick the box on the left. A reboot does not see a new entry in the monitor. It seems to occur only on the first boot of the day.  Quick Compand "sfc" files are good. I am attaching a capture details

    Waiting for an answer... Thank you

    Hi @Stu2009 ,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked into your question your and the

    Intel PROSet/Wireless WiFi software works not properly on your laptop. Here is a link to Microsoft for help with the operating system of questions.

    If this is not enough, you can try in Device Manager, uninstall the Intel PRO/Wireless Network Connect, network adapters, right-click on the Intel PRO/Wireless adapter & select uninstall. Then in Add/Remove programs in the control panel select the Intel PROSet/Wireless WiFi software. Reboot the laptop.

    Here is a link to reinstall the Intel PROSet/Wireless WiFi software as it says this error could be in the software, not the laptop.

    I hope this helps.

    Thank you.

  • House-sharing has stopped working with all that, please help.

    Today is December 18, 2015. Sharing House had stopped working a few months ago. I called support and they went well a lot of things and finally said: "No, it will never work." I insisted on the conversation with someone else, they me connected. He does a lot of things, including starting in safe mode. We had disconnected from all off all the home sharing on all devices. Off all routers. Apple TV, etc. (Airport Extreme connect to a router from Verizon. Tried of Double and single mode NAT-bridge), I think that we have erased all cache files. Reinstalled iTunes several times. At a certain point in home from work sharing.

    Now, he stopped again and I tried to repeat what we have done. I looked in the Ports (using iNet) and did not notice anything running that uses a specific port "5353" which is supposed to be for home sharing. I saw "3689" appears twice, i.e. for 'iTunes Music Sharing, AirPlay. In any case 2 Apple TV and 1 iPhone cannot access home sharing. House sharing is enabled on all three devices and in iTunes on the Mac Book Pro.  In order to confirm that all 4 devices are connected to the network, I scanned the observation network all devices and their IP addresses. The two Apple TV are 3rd Gen iPhone is a 6s, the Mac is a "(retina, mid-2012) MacBook Pro" the router is an Airport Extreme tour. All devices have the latest Firmware, software, etc. Since I have an iTunes account before .mac, .me, iCloud came out I found myself with two pieces of identification of the Apple.  Why they did not automatically merge these, I have no idea. In any case I'm stuck with a Store, iTunes App Store for music, movies, applications, etc. and an iCloud for synchronization, calendar, contacts, ETC. account between devices. Without worrying only the same App store / iTunes store account Apple ID is used to connect to the iTunes Store on all three devices. I do not use family sharing!  I have the firewall turned off on the MacBook. I really expect not sharing never start to work at home. The file on this subject on 26/09/15 number has been '947596222 '.  What I have not tried, I'm ready to.

    Well the answer is: turn on home sharing in preferences does not work! It is now in the Menu file, it should be removed from preferences.

    Nobody ever says do me it otherwise, so I always had. So, if you didn't know that you do not use preferences to activate home sharing more. Go to your file menu in iTunes and turn there.

  • I'm enable to launch my CC of Muse Acrobat after I updated to 2015, it says adobe cc muse has stopped working. Can you please help me on this problem.

    Hello.

    I'm enable to launch my CC of Muse Acrobat after I updated 2014.3 for 2015, its says adobe cc muse has stopped working.

    Can you please help me on this problem.

    Thank you.

    Replied to your previous post on the same topic.

    Thank you

    Sanjit

  • I just download aa3 game without problem, uninitialized probs, but as soon as I start the game a window appears saying "error, windows has stopped working", what is wrong?

    I just download aa3 game without problem, uninitialized probs, but as soon as I start the game a window appears saying "error, windows has stopped working", what is happening, please help.

    Hello
     
    Follow the suggestions and see if it helps.
    Method 1
    You can check if the problem exists in a clean boot state.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: After a troubleshooting follow step 7: reset the computer to start as usual

    Method 2
    If the problem persists, you can uninstall and reinstall the game.
    Uninstall or change a program
    http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

    You can provide the event logs in Event Viewer.

    You can provide the exact error in the Event Viewer logs to find out what caused the problem.

    Open event viewer

    http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

    You can also see the article for more information.
    The problems of the game performance
    http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems

  • Windows 8.1 with Intel Proset wireless/bluetooth problem

    I own a dv6 HP Envy with Windows 8 and I just updated my laptop to Windows 8.1, and once I restarted my laptop, the center of the Action gave me this message: 'reinstall Intel Proset Wireless/Bluetooth' and I know exactly what Intel product I'm supposed to download because I found more than one Intel Proset software. If anyone can help, please do.

    water of bleach-eminem says:

    I own a dv6 HP Envy with Windows 8 and I just updated my laptop to Windows 8.1, and once I restarted my laptop, the center of the Action gave me this message: 'reinstall Intel Proset Wireless/Bluetooth' and I know exactly what Intel product I'm supposed to download because I found more than one Intel Proset software. If anyone can help, please do.

    Hello

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23169

    Windows 8.1 is probably 64-bit then download the e64. De64 version is a driver only...

    http://Downloadcenter.Intel.com/confirm.aspx?httpDown=http://downloadmirror.Intel.com/23169/Eng/wireless_16.1.5_e64.exe&lang=eng&DwnldID=23169

  • Tecra A7 - Intel PROSet / Wireless does not respond to the stop

    Hello

    during shutdown of my Tecra A7 the Intel PROSet/Wireless does not react, but must be completed manually.
    The last such Intel driver published by Toshiba download would help solve this problem?

    Thanks in advance for your support!

    Best regards
    ClausP

    Hello Christmas

    You can try to remove Inter PROSet and use the Windows settings for WLAN configuration.

    I don't have this problem, but you can also try installing the latest version of the Toshiba support page.

  • Cannot manually remove Intel PROSet / Wireless

    Attempt to upgrade to Windows 7 Windows 8.  Windows Upgrade Assistant is instructing manually uninstall me Intel PROSet / Wireless, because it is not compatible with Windows 8.  I'm unable to do so.

    This is how I fixed it:

    • Go to services.msc from RUN
    • Stop these 3 http://i.imgur.com/0QKnn.jpg services
    • Remove the bluetooth folder under http://i.imgur.com/mOChF.jpg
    • Remove services that are associated with them in the cmd (run as administrator):
      SC delete "Bluetooth Device Monitor"
      SC delete "Bluetooth support Service.
      SC delete "Bluetooth OBEX Service"
    That should do the trick, it worked for me at least!
  • Intel PROSet/Wireless Software unavailable for Win7 32 bit

    On this [page Toshiba | family = 2 http://www.toshiba.eu/innovation/windows7_drivers.jsp?service=EU&selCategory=2&selF & selSeries = 152 & selProduct = 7954 & selShortMod = null & language = 16 & selOS = 29 & selType = all & yearupload = & monthupload = & dayupload = & useDate = null & mode = nes allMachi & search = & action = search & macId = & country = all & page = 2] I downloaded the 'Intel PROSet/Wireless Software' for Win7 32 bit file, but when I try to install it it says 64-bit operating system is required.

    The driver of the Web site for intel does not work.

    It is a software Intel Wlan (not WLan driver)
    You can download it directly from the Intel page and it works since it worked on my laptop too.
    http://www.Intel.com/support/wireless/wtech/PROSet-WS/sb/CS-034041.htm

  • Intel PROSet/Wireless on Pro U300 does not recognize, WPA2 or SSID

    Hidden SSID) The Intel PROSet/Wireless client takes up more than an hour sometimes to recognize my wireless router, which is set to WPA2 security and has a hidden SSID. I share with a neighbor, who refused to resign from his security wireless. However, while simple clients such as Netstumbler can find the signal within seconds, the customer supported by Toshiba takes MUCH more time. Why Intel and Toshiba was so slow to update this client? Very simple (1 year) $30 Netgear Wireless USB stick my office connects immediately, without no questions, no problems.

    Windows Windows Update) has just published an "update" that installed itself without my request, which makes now so that the customer of Intel, windows and the system of "configfree" all declare "another wireless control system" when none of them work. Windows now automatically connects to a local wireless router on my street that is not listed on my profile, and who he can't get an IP address because, naturally, it has set up no password.

    True to my name,

    Annoyedman

    Published by: ADMIN

    First of all that this is a user to user forum and the question as why drivers update not faster is meaningless. What we can do is to provide some suggestions that may solve some problems

    Back to your question; I think you should just check the Intel page and need to install the driver WLan last, available for this minPCI wireless network card.
    In addition, you can choose between 2 different WLan configuration possibilities;
    (1) you can use the clean Windows configuration option
    (2) you can use a WLan configuration client as Intel ProSet utility

    If you use the Intel ProSet utility, then the windows own option should be disabled.
    In last but not least you should check if all the parameters of the Protocol TCP/IP LAN wireless are set to automatic.

    By the way; If you are using XP then you must install this fix;

    + Wi - Fi Protected Access 2 (WPA2) / Wireless Provisioning Services Information Element (WPS IE element) update for Windows XP with Service Pack 2 is available.
    http://support.Microsoft.com/kb/893357/en-us/

  • My Wi - Fi Protected Setup Wizard connection dialog box in the Intel PROSet /Wireless connection utility won't let me get caught in the password for my BigPond router.

    Dialog box of connection Wi - Fi Protected Setup Wizard in the Intel PROSet /Wireless connection utility

    My Wi - Fi Protected Setup Wizard connection dialog box in the Intel PROSet /Wireless connection utility won't let me get caught in the password for my BigPond router. He let me just plug in numbers not letters. Can someone tell me how to work around this problem?

    Hello

    This can happen if the configuration of the router is configured to accept the password in numbers. You can get in touch with Bigpond support for more information on this.

    Technical assistance to BigPond

  • How can I enable Intel PROSet / Wireless?

    I just bought a Netgear N600 router. In the implementation process, the adapter Intel PROSet / Wireless is down switch.  How do I turn it back on?

    Hi GreggWeiler,
     
    For more information on the configuration of the router, refer to the manual of the manufacturer. Visit the following link to do the same thing:
     
    Additional reference on:
  • Vista upgrade - > Windows 7. Cannot uninstall Intel Proset wireless WiFi Software

    Computer: Computer laptop Toshiba Satellite A305

    I got the upgrade disc for Windows Vista, upgrade to Windows 7. During installation, the message appears that Windows 7 can not finish the episode, and I need to uninstall the Intel Proset Wireless WiFi software.

    I use the utility for uninstalling programs of the control panel. When I select "Intel Proset wireless WiFi Software", there is no option to uninstall the program. I tried to use the repair feature, but the Windows 7 upgrade hangs at this point, insisting on the fact that I have to uninstall the Intel Proset Wireless WiFi software. I'm so stuck. Thank you for your suggestions. It's late here now. I'll check back tomorrow.

    Update: problem solved by a local computer expert. He connected to Intel and later that the visit was able to uninstall the Intel Proset Wireless software. Then the upgrade Windows 7 complete installation and is very good. The new wireless software program included in Windows 7. That's why Windows 7 wanted the Intel program deleted.

Maybe you are looking for

  • I have the version 4.0 beta 2, I need to be able to enlarge the type on a web page (not all web pages) how can I do this?

    need to enlarge the type on a page (I do not do this by default on all pages.) I play some games, they should not be expanded. How can I go simply enlarge the type on the pages that I need a web page This has happened Each time Firefox opened is if a

  • Satellite U940 - SSD drive shows only 11.22 GB

    Hello I had a new Satellite U940 - B484 Ultrabook.The first thing I did was finishing the wizard, then I created the recovery media (using external DVD drive) on three discs 4.7 GB DVD We have Windows 8 Pro license, so my friend formatted the system

  • Satellite 1410/2410 - need to product recovery CD

    Hello I need to reformat my laptop but I can not find my product recovery cd. I don't remember if I've ever had or not to be honest. Can I get one sent to me? Or I can download recovery stuff from anywhere? I have the cd tools & utilities, is the stu

  • Op amp has no gain

    It takes a very simple test circuit, but I just can't understand why in the attached circuit op amp has no gain to the exit. Please advise. Thank you! K. Kwan

  • Computer laptop Pavilion dv6 will not work

    Hello, I have a computer laptop Pavilion dv6 with product number QE023UA #ABA. It works under windows 7. So I was just playing and my laptop turns off suddenly as if he had run out of battery life. But he is in CHARGE. I didn't know what happened, so