r mi pc're window vista pack 2 y tiene an eroor en el update of 80044e error continued igual.

Similar Questions

• Update cumulative security for Internet Explorer 8 for Windows Vista for x 64-based systems (KB2618444) is NOT updated successfully. 8007371 C error code. Windows Vista Edition Home Premium Service Pack 2

  Update cumulative security for Internet Explorer 8 for Windows Vista for x 64-based systems (KB2618444) is NOT updated successfully.

  Other updates DO not seem to be successful.

  Error code is 8007371 C.

  How can I get this update successfully.

  Windows Vista Home Premium Service Pack 2, 64-bit system.

  Thank you

  Hello

  You can view these methods:

  Method 1: Temporarily disable the security software

  I suggest you to disable temporarily any them program of security on your computer and check if it solves the problem.
  After reviewing the question you must reactivate the security on your computer program.

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2: Reset the Windows Update components

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.
  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  Method 3: Clean boot

  I suggest to clean boot and try to install the update.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  Once you make these methods try to install the update and check if it works.

  See the following links:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  http://social.technet.Microsoft.com/forums/en-us/itprovistasp/thread/20fa3032-Cdc6-4FF5-aea4-fd31a65e883d/

  It will be useful.

• during the windows vista pack 2 update my antivirus will become obsolete?

  during the windows vista pack 2 update my antivirus will become obsolete?

  Hi victor,

  It would be useful to know the name and the version of the antivirus program that you use. However, in general (and frankly I can't think an exception) upgrade Vista SP1 to SP2 will not make your out-of-date antivirus.  In fact, it will improve the overall security of your system.  But just to be on the good side, I suggest that you update your AV software once you have completed the upgrade to SP2 and installed all the additional Windows updates which will become available once you do this (and you may need to run a few times to get everything as some may be presented until others have been installed).

  If you want suggestions of security software, please post your version of Vista (e.g., 32-bit Vista Business) as well as the names and versions of any software security you are currently using or have used or had installed even if you've never used (and when the definitions for the software in use have been updated).  These suggestions will be excellent and work well together (even if you can not install two AV programs at the same time, these are not all the AV programs but still aid in the detection and removal of malware, viruses and spyware.  And they are all completely FREE - nothing we suggest will not cost you even a penny and that they will be as good if not better that people pay money to get the bits.

  I hope this helps.

  Good luck!

• My pc is now using windows vista pack 1. Windows Vista ask updates your windows vista pack2. I would like to know when I update this Pack 2 vista how fees?

  My pc is now using windows vista pack 1. Windows Vista ask updates your windows vista pack2. I would like to know when I update this Pack 2 vista how fees?

  There is no cost.

• A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)

  A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)  I can't find answers and I'm not tech saavy.  Every day for a month updates failed to install

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  In the following article from Microsoft Fixit to reset Windows Update components and check if the problem persists, run the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 2:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  Hope the information is useful.

• I am unable to back up windows Vista on an external drive that I am cant get full backup - error 0 x 80070005

  original title: error message

  I am unable to back up windows Vista on an external drive that I am cant get full backup - error 0 x 80070005. How to overcome this please? Thanks for your help. Kay Alexander

  Hello

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  "This forum supports questions for the default backup utility in Windows Vista, Server 2008 and beyond."

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• It cannot install windows vista pack 1. tried several times but not able to.

  Remember - this is a public forum so never publish information such as email or phone naked

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

  Download link for the 32-bit version of Vista SP1.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=874a414b-32b2-41CC-bd8b-d71eda5ec07c&displaylang=en

  Windows Vista Service Pack 1 five language standalone for x 64 (Kb936330)

  If the above does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• Failed to update Windows Vista pack 2 error 0 x 80041010

  I tried several times the Windows Vista Service Pack 2 update (KB948465), but accepting after the benefits, etc. the said engine: Instalattion has not been successful. An unknown error has occurred error code: 0 x 80041010.
  Could you please help me with this problem?

  Other info:
  Fab: HP
  Model: HP dv 6700 notebook pc clubhouse
  Processor: AMD Athlon (tm) 64 x 2 Dual Core TK-57 processor - 1.90 GHz
  RAM: 2 GB
  System type: 32-bit operating system

  Thank you

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Click on the link below and follow the instructions to download and install Service pack 2 manually.

  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx#EFH

  If this does not work, follow the instructions in the link below which will help you solve the problem.

  This problem may occur if one of the following conditions is true:

  • A program on your computer interfered with the installation of the service pack.
  • There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  If this does not work, follow the instructions in the link below.

  1. click on start.

  2 type one in the start menu search, and click Ok.

  wmiadap/f
  winmgmt /clearadap

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Windows Vista Home Prem x 86 has stopped doing the updates and update history disappeared C0000022 error code

  It happened about 10 days ago, and about 2 days ago popped up validation error w / error OxC0000022 code, can not find these codes anywhere. I have a black desktop. This computer was my daughters before she settled in the West, and I know that she had problems with the validation before I remember to tell him something about this, it was a bear, she had to get help from MS to help. But it is very difficult to get in touch with him and I don't want her to think that old dad don't know what hes doing. I installed the virus and malware and a few budget programs the wife play WOW on it but, despite this, it is working long hours. My daughter had updated Automatic, disabled, looks than year and a half she had it when I turned on updates it took several days to catch up.but which was about three months ago. Like I said that happened about 10 days before he gave not me all the problems of the six months that I got it. Any help would be appreciated.

  I installed [anti-virus and anti-malware application?]... My daughter had updated Automatic, off, looks like a year and a half...

  Naughty, naughty girl! See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista Home Premium - stuck at 0 on 3 loop update Windows at startup. Can you boot without startup disk and bypass this?

  Does not open in either safe mode. Courses in this loop. I don't have a boot disk. I ordered a year ago by Tiger Direct. An ASUS desktop PCs. Can you help me? Or do I need boot disk?

  CrystalBall © SEZ...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP G70-111EM - Windows Vista 32-bit (Trying to set at the factory and keep getting error 1002)

  Dear HP support and users,

  Model: HP G70-111EM

  I've had this laptop since December 26, 2008.  Last week something was wrong on the laptop, I think managed to install the Vista program 2011 Anti Spyware of viruses on the laptop by mistake and I was not able to remove it with anti-spyware or anti-malware.  So decided to return the computer as long as factory setting by using the HP RESTORE DVD that I created in the past of the laptop.

  Then inserted the DVD and the beginning of the process until I got error 1002.  Now I can't do anything.  The hard drive seems to have been formatted so all the information was deleted, but I start the process of reinstalling VISTA.

  I am really lost do - what I need to do to solve this problem.  I have a laptop £450.00, which has an operating system that is hidden in a partition, but how can I reinstall it when the DVD of RESTORATION HP continues giving error 1002.

  

  Thank you all for your support but no luck.  I decided to buy windows 7 32 bit and install on the laptop.  I had some problem with wifi work only not with Windows 7 32 bit.  But guys on the forum helped me with that.

  So no more Windows Vista for me.

  Thanks to all and no thank you HP, as it cost me £150 for the copy of Windows 7.

• I have Windows Vista Home Basic Edition. I can't install updates - error message A 80071, 30

  Almost all the updates do not settle.  The only one installed is updated security essentials.

  Try to install the updates in a clean boot state:

  http://support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Other suggestions:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

• 53 updates to Windows Vista and now screen keeps saying that it configures updates, then it restarts and the wont do anything else

  After using no not my laptop for some time, I turned on and 53 updates to Windows Vista. Went through the whole process, then got to the updates configuration screen and the laptop keeps restarting and it won't do anything else.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  ___________________________________________________________________

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Windows Vista hanging on "Please do not feed off - installation updates.

  I went to bed, woke up this morning. The windows install updates screen is there and it won't go away. Tried hard reboot and take out the battery and let the battery die. Again, he goes to the same page and will not go back on the desktop.

  Hello

  Follow the steps below:

  
  Method 1:

  I suggest to manually restart the computer and try to start in safe mode and perform a system restore.

  Refer to this link for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  
  Method 2: restore the computer to ean point earlier in time.

  a. Click Start, type system restore in the search box and then in the list click on the system restore program. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  b. in the System Restore dialog box, click on choose a different restore point and then click Next.
  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  d. click Finish.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Once the computer is restored to the earlier date, try to install the updates manually.

  
  NOTE: you will not lose your data stored in the hard disk by performing a system restore.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Platform update Supplement for Windows Vista for x 64 (KB2117917-french) systems does not update.

  The answer is provided by:
  Ronnie Vernon MVP, moderator
  Date: December 18, 2008

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/70a484f7-fca5-4d6b-BAFF-805160380a86/

  This solution does not work in order for the update to install. Ronnie Vernon's instructions have been followed to the letter, from #1 to #5, but the update of the platform still has not installed. After restarting the computer, the update tries to configure the update and to step 3 of 3 steps, the computer screen indicates that the update is not properly configured, and need to reconfigure. Help, please.

  Try to perform an InPlace upgrade.  This process should not affect your files and personal settings, however, it is always advisable to back up your important files before making any changes to the system.  The steps are below:

  How to perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer.

  To perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2, follow these steps:

  1. close all running applications.

  2. Insert the Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2 DVD into the DVD drive of the computer.

  3. in the settings window, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  Click on start and type Drive: \setup.exe in the box to start the search.

  Note The placeholder drive is the drive letter of the computer's DVD.

  List programs, click Setup.exe.

  In the settings window, click install now.

  1. click on connect to get the latest updates for installation (recommended).

  2. type the CD key if you are prompted to do so.

  3. Select the operating system in the "Windows Installer" page you want to update or Inplace.

  4. click Yes to accept the Microsoft software license agreement.

  5. on the which type of installation you want? of the screen, click upgrade.

  6. when the installation is complete, restart your computer and try to reinstall SP1.

  Please see: How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  See you soon