R & R could not start on Vista SP1

Similar Questions

• VISTA: backup application could not start due to an internal error: (0 x 80080005) Server execution failed

  The backup application could not start due to an internal error:
  Server execution failed (0 x 80080005)

  Vista Ultimate - trying to COMPLETE the backup of a computer

  Hi people,

  I had a similar problem with Vista (64-bit edition complete edition) machine. I run automatic backups for more than a year. Suddenly, backups started fail with the following error code:

  "The file or directory is corrupted and unreadable 0 x 80070570.

  I thought it would be my external drive - so I tried an another one - same error. After a search of different topics around, I tried various fixes (similar to above), but none of them worked.

  I managed to find the problem though. The issue is not with the drive being written - it's the current backup disc that is the problem. If you want to save your primary drive (C:, for example), try to perform a check of the errors on this drive (right click on your drive home, you are trying to save, choose 'Properties' then go to 'tools' - click 'Check now' under the control of errors - and check both boxes). Since this is the current drive, you must stop and restart - the system then automatically checks the system files and windows files on the next boot.

  After doing this, my problem cleared up. Apparently, the backup software was crashing trying to read a corrupted file or a sector of the hard disk, that he was backing.

• Could not start the Windows Vista firewall

  Hi all

  I can't start the Windows Firewall service in anyway.
  I can't open it via Control Panel, as it is said simply: "the Windows Firewall settings cannot poster because the asscioated service is not running. You want to start the Windows Firewall service? »
  I click "Yes", then he said: 'Windows cannot start the Windows Firewall service. There is no error code indicated.
  I tried running "wf.msc" using the Microsoft Management Console. When this window appears, he says: "there was an error opening the Windows Firewall with advanced snap-in security.; The Windows Firewall with Advanced Security snap could not load. Restart the Windows Firewall service on the computer that you are managing. "Error code: 0x6D9.
  As it seems, I can not start it this way or the other.
  I pressed Ctrl + Alt + Delete and click on the Services tab, then click services on the bottom, and this opens the Services window.
  In the new Services window, I try to start the service "Windows Firewall". I get a message saying: "Windows could not start the Windows Firewall service on the Local computer.; Error 1068: the dependency service or group could start. »
  Therefore, it does not. The service is set to automatic.
  I found another process called 'Base filtering engine', which I discovered is related to the use of the Windows Firewall service. Then, that I try to start this service, and he said: "Windows has no start the engine service of filtering based on Local computer." Error 0 x 80320009: an object with this GUID or LUID already exists. »
  Still, I can't find a way to fix the problem. In addition, the service is set to automatic.
  So if someone could help me, give me ideas or tell me how to solve the problem, it would be greatly appreciated. Thanks in advance.
  P. S. sometimes, when I type things in the command prompt, I get a message saying that "the requested operation requires a rise." What it means
  ?
  EDIT:
  The base filtering engine
  IKE and AuthIPsec Keying Modules

  Internet Connection Sharing (ICS)

  IPsec policy agent

  Routing and remote access

  Windows event collector

  Windows Firewall

  All of these services don't work, with each saying "Windows did not start the * service * service on Local computer.; Error 1068: The dependency service or group could start. ", with the exception of the Base Filtering Engine service.

  EDIT:

  I believe that the motor of filter of Bae is the root cause of the problem, because when I try to start it, it says "Windows cannot start the engine service of filtering based on Local computer. Error 0 x 80320009: an object with this GUID or LUID already exists. ", so that all the other programs on this service, said depedent" Windows did not start the * service * service on Local computer. " ; Error 1068: The dependency service or group could start. ».

  EDIT:

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065

• Windows Vista: windows could not start error. is suspended from the "Microsoft Corporation" loading bar then black screen BIOS not acpi compliant

  After you have installed the driver for the zune hd, I was asked to restart my computer. After the reboot, start froze on a white screen. I've seen this before and it is usually because of some connected usb components. so I manually powered down the Tower, disconnected the cable from zune and restarted. This time a screen saying that windows could not start, "launch Startup Repair tool" was recommended. Select this habit makes the startup hang to the progress bar from Microsoft corporation, then to a completely white screen. Although strangely, once only a blue error screen appears which says that the BIOS is not acpi compatible. I can't restart with F8 to go into safe mode, "windows error recovery" still appears. "Start windows normally"produces the same results as the tool to restart launch system. " I have a drive to upgrade to windows 7 and a windows XP upgrade disk. the disc of windows 7 hangs at "starting windows" and the XP disc gives a blue screen error: stop: 0x0000007B (0xF78D2524, 0c 0000034, 0 x 00000000, 0 x 00000000)

  I think I have a BIOS problem, but I don't know how I could continue dealing with the repair. I have no success update the bios from usb flash. Any idea is appreciated.
  Update: managed to start with F8, choose to boot in safe mode and loading hangs after "load: \windows\system32\drivers\crcdisk.sys"***.
  the machine is a gateway LX6810-01 (friend motherboard)

  Hello

  1. What is the exact error message when Windows Vista does not start?

  2. you have the disk Installation of Windows Vista operating system?

  I suggest you change the mode of RAMA to IDE in the BIOS. You can contact the PC manufacturer for assistance.

  Note: BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  In addition, perform a check disk in Windows Recovery Mode.

  (a) Insert the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD".

  (c) select a language, an hour and the currencyand a keyboard or an input method, and then click Next.

  (d) click on check drive for errors.

  (e) in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

  (f) to the System Recovery Options dialog box, click on check Drive for errors.

  (g) use the switch/r to run the disk check.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  It will be useful.

• Windows could not start. A recent hardware or software change might be the cause. (vista)

  I've updated pctools free and there was a mistake by because it came when the computer restarts,

  Windows could not start. A recent Ministry of hardware or software may be the cause. To solve the problem.

  1. Insert the windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "repair your computer".

  File: \windows\system\drivers\PCTCore.sys

  status: 0xc0000098

  Info: windows could not load a critical system driver is missing or corrupt.

  I tried I went to my computers startup options advanced and tried to run in safe mode, but the same previous screen came. Each option in my boot options is the same screen. I realize that to solve this problem, I might have to reload my OS together.  I tried to put what I believe to be the installation disc in and restart but it starts and says the same message. I don't know how to start from the DVD.

  Someone at - it solutions?

  Change the boot order in the BIOS to boot from the CD drive first.
  How to change the boot sequence in the BIOS
  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  C:\windows\system32\drivers\pctcore.sys file information
  http://www.file.NET/process/PCTCore.sys.html

• Widows could not start. A recent hardware or software change might be the case. Pre-installed vista so NO CD.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: widows could not start.  A recent hardware or software change might be the case.  Pre-installed vista so NO CD.  SAFE MODE AND ALL THE OPTIONS (LAST KNOWN CONFIGURATION, SAFE MODE WITH COMMAND PROMPT, ETC.) ALL DO NOT WORK.  Help, please

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You can't have a cd, but the PC manufacturer if they did not provide recovery disc, there is a hidden restore partition which should be accessed to make recovery disks.

  There the diagnostic utilities provided by the manufacturer of the PC that you can access from the start screen to test your hardware? Access your site from PC manufacturers for help on how to access these if avilable

• Could not start vista windows firewall

  When you try to start the services program through windows firewall I get this error message: windows could not start the service on the local computer's windows firewall.
  Error 1068: the dependency service or group could start.  I need help...

  In addition to that maverick said... Follow the steps below...

  1. run "netsh winsock reset " starting from an elevated command prompt and reboot...

  2. go to the again elevated command prompt, and then run 'netsh firewall set opmode enable' in the command window... that should do the trick...
  Best regards, H.M. KOWSHAL a.k.a W@R10CK

• Windows Vista - could not start 0xc00000f

  I have the Dell Studio laptop.

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click Next.
  3. click on "repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  Status: 0xc000000f

  Info: The boot selection failed because a required device is not accessible

  There is a problem, I don't have any CD for her.

  I am an academic and I want at the end of the work, until school starts again. Please can someone answer my question as soon as POSSIBLE? I'm not a computer genius, but I'd like to have someone who can help. Thank you!

  With respect,
  Lam

  Hello

  I suggest you to contact the system manufacturer for assistance.

• Qosmio G45-AV680 - Windows could not start

  My cousin has this laptop and could not start the system. It displays the message:

  "Unable to start Windows. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you don't have this disk, contact your system administrator or computer manufacturer for assistance. Status: 0xc000000f

  "Info: the boot selection failed because a required device is not accessible.

  I tried to go into safe MODE, but it cannot do so. It starts to load the drivers, but it stops at some point and will not continue...
  The problem is that she did not have any DVD with laptop. I guess that the Vista operating system, that comes with it is the special partition on the hard drive, but how can I access it? How can I reinstall the system? I don't mind if I lose data, I used just to make it work...

  If DVD recovery is not assured that means installation of recovery can be started from the HARD drive. I don't know how it works exactly on cell phones in the United States. Try pressing zero button after starting upwards to see if HARD drive recovery option can be started.

  By the way: check the Toshiba U.S. support under http://laptopforums.toshiba.com/tshb/ forum
  Maybe someone there can explain how it works to start the installation of the OS on the HARD drive.

• Windows could not start. Winload.exe corrupted

  Been having some problems with my Equius has therefore decide to start, F8 and do a system restore toshiba.

  Started and started to format the drive. All of a sudden he projected blue.

  The problem is now I can not even start until now to get the recovery/restore option. I get: -.

  Windows could not start. A recent hardware or software change might be the
  cause...

  File: \Windows\system32\winload.exe
  Status: 0xc000000f
  Info: The selected entry could not be loaded because the application is
  missing or damaged.

  Not sure how it all works, but I guess that recovery stuff are stored on a separate partition. Problem is I guess you must be able to start to load windows before you even get to do this?

  I downloaded and tried a boot with no joy, and of course vista recovery disk, toshiba provide a vista disk. How the hell can I recover from this situation?

  Hello!

  If you are not able to get in the boot menu for HARD drive recovery, you must use a Microsoft Vista disc to reinstall the OS.
  Or you use the Toshiba recovery disc but I think you forgot to burn the disk because normally you get a message (recovery point) you want to burn the disc.

  However, you can order a Toshiba Toshiba recovery disc directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Satellite L300D-11 a - do not start Windows vista

  Hello

  When I turn on my computer, I get the following error message:

  Error recovery for Windows

  Windows cannot start up. A change of equipment or software that has been recently achieved may be the cause.

  If the windows files are damaged or misconfigured, you can start the repair tool to help you diagnose and fix the problem. If the power was interrupted during startup, choose start windows normally.

  Start the (recommended) Startup Repair tool
  Start windows normally.
  After a while windows automatically selects the first option and try to load windows in recovery mode, but then, I get the following error:

  "The installed software could not start. Click ok to shut down the computer.

  When it stops and I start the computer again, I get the same error message when I started with the 2 options of recovery mode or start windows normally.
  When I select 2. option (start windows normally), it loads windows and after some time restarts and then I get the same error with two options.

  I tried to boot from the CD (recovery disk, vista bootable cd) and computer attempts a while but then he gave up and start again starting from the HARD disk. (I changed to boot from the CD first in the BIOS).

  Anyone know how to fix this?

  I have laptop Toshiba model nr: L300D-11

  Hello

  If I understand your message, you tried to boot from recovery and MS Vista CD disc and no recovery disk worked not the Vista CD.

  Is this good?

  Hmm that's very strange... Perhaps you could remove the laptop HARD drive and could put it into a USB external HDD enclosure.
  Then you could format the HARD drive using another computer.
  After that, you could try to reinstall new OS

  Please also enter the BIOS and set it to the default settings the compatible SATA mode value and try to boot from the Vista CD again

  Good luck

• Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

  Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

  Hello

  1. what application or antivirus security suite is installed and your current subscription?

  2 Norton (another) or a McAfee application ever installed on this machine?

  3. What are the fix applications that you used so far to try to fix this problem?

  Try the next method and check if that helps you with the question of the 127 error you receive.

  Method 1: Rdding the DLL file by doing the following:

  1. Click Start and click Run, in the search box type CMD and press to enter.
  2. right click on CMD in the list and click "Run as Administrator".
  3. type the following command and press ENTER. Regsvr32 msvcp71.dll
  4. close the command prompt window.

  Method 2: run the file system (CFS) Checker:

  (Note: you need an XP installation disk to start the System File Checker search.)

  The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

  1. click on start, and in the box to start, search type CMD
  2. right click on CMD in the list and click "Run as Administrator"
  3. type the following command and press ENTER. Sfc/scannow
  4. close the command prompt window.

  For more information on scan SFC (System File Checker), please look in the link mentioned below.

  http://support.Microsoft.com/kb/310747

  I hope this helps.

• Windows error recovery. Windows could not start... _

  My Dell laptop I have from 10th July indicates the following:

  Windows error recovery

  Windows could not start.  A recent hardware or software change might be the cause.

  If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.  If the power was interrupted during startup, chose to start windows normall7

  Start the reboot system (recommended)

  Start Windows normally

  The two options to return to the same screen.

  I tried the menu under the F keys, but all options listed do not seem to do anything.  I talked to Dell who ran a diagnostic test on the portable equipment and everything was ok.  They wanted then £70 the issue above which I am unhappy that have not had the laptop for a year yet!

  I would be very grateful if you could help!

  Thank you

  Mark

  Hello mtb123,

  1. have you tried the steps suggested by Srinivas R in the previous post to make a startup on your computer repair using the Windows installation disc?

  2. you remember what changes you made to the computer before you start this error?

  I suggest that you access the system recovery options using a Windows Vista installation disc and do a startup repair and if this fails, you can do a restore of the system from the Windows recovery environment.

  You can see the previous post of Srinivas R to verify the information on the system restore.

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Cannot open Windows mail, WinMail.exe - Unable to locate component, could not start because SHELD32.dll was not found

  Original title: my Windows Mail program and shortened, will not open.

  My Windows Mail program and shortened, will not open.  I get a box of popup titled WinMail.exe - impossible to component locat.  Inside it is said he "could not start because SHELD32.dll was not found."  Reinstalling the application may fix this problem. "When I click OK another box opens with"MSOE.dll is not found. »

  Hello

  I moved your post to the forum Windows Vista under programs category. They are experts in the field of your request and would be in a better position to answer your concerns.

  Thank you.