R40 - Volume keys on the internal keyboard do not work



Tags: ThinkPad Notebooks

Similar Questions

  • Satellite C660 - new internal keyboard does not work

    Hello

    I'm completely stuck I have a portable satellite c660 keyboard did not work.
    So I bought a replacement keyboard and installed and checked in the Device Manager and it says it is there and works correctly, but the replacement keyboard still does not work.

    I updated the bios and uninstalled the keyboard drivers and reinstalled them that I've done everything I can think off to try and get this new keyboard working but I am having no luck and could so with some assistance.

    Have you ever checked if the USN external keyboard works properly?

    I ask because in the case where the external keyboard does not work properly, the internal keyboard problem could be related to faulty keyboard controller (motherboard) or a problem of system m.

    In case the external keyboard would work properly, you had any luck with the new keyboard. It might be possible that the new keyboard is malfunctioning.

  • Have key but the installation media does not work

    OS came with the laptop, now the recovery disk does not work so I just the key but not the medium to install it. Please tell me what to do? Really need my laptop!

    Contact the vendor for a replacement drive.

    Why do you think you need to re - install Windows?

    If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
    My Blog

  • Multimedia keys on Dell USB keyboard does not work.

    I have a Dell Studio XPS 9000 with keyboard Dell USB connected.  All of a sudden the shortcut keys of those (top-right on the keyboard) stopped working.
    What may have caused this?  What can I do to make them work again?

    Original title: Dell USB keyboard

    More often when a device does not work, it's because of a driver.  Try to reinstall your.

    It works for win 7 & 8

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

    http://captaindbg.com/how-to-update-drivers-on-Windows-7/

  • Z830 - pad digital satellite on the external keyboard does not work

    Hello

    I tried to get an external keyboard (USB) to work with my Z830 running Win 7 (64-bit). I've tried three different keyboards to USB in ports and also a wireless keyboard.

    The keyboard works fine, but I can't the numeric keypad right of the keyboard to work.
    It allows me to move the screen IE when the NUMLOCK is turned off but when the NUMLOCK is turned on, it does nothing.

    I looked in the bios and changed the parameters relating to the features of legact and also the numlock option, but to no avail. The numeric keypad on the keyboard worked on other machines.

    Any suggestions greatly appreciated.

    Thank you

    Ash

    Hello

    I'm not quite sure that all this, but my hypothesis is code KBC m is missing in the BIOS.
    Satellite/Portege Z830 keyboard does not support keypad so maybe that's the reason why the numeric keypad on the keyboard can not be activated.

  • I have the same problem. When I do a system restore, I get an error message. The service of shadow copy of Volume used by the system restore does not work. Error 0 x 81000202

    My security service center cannot be started too.

    Hello

    Malware scan

    malware stops normally you use the system restore protect themselves remove you

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
    7.  

    and try to do a restore mode safe

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
    7.  

    and if using norton disable product anti-forgery protection

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  • Windows 8 - zero key on the numeric keypad does not work

    I have Windows 8 on a laptop Samsung.

    When the NUMLOCK is turned on, all the numbers to work, EXCEPT the button zero (0).

    When you press on, it opens the small menu "undo" in the upper left corner of the screen.  It's as if the function-0 key is stuck.

    All ideas of difficulty would be appreciated.

    Jan

    My Samsung laptop has a "Fn lock" keys just above of the + key.  I pressed it and it solved the problem you describe.

    I finally found it after a day or two to deal with 0 menu key.

  • I'm trying to change the registry key, but the value change does not work correctly.

    Original title: HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\kernel\ DWORD Does't work on Windows XP

    OS version:

    WindowsXP_x86_English_Professional_SP2

    I put
    HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\kernel\ DWORD
    to 0 and reboot the system.
    But the system is still in the case.
    I can't create A.txt and a.txt in the same folder.
    Why?
    And how I can config XP SP2 as case sensitive?
    Thank you very much!

    Hello

    The steps of troubleshooting from the following link and check if that helps.

    A file system case-insensitive which becomes case insensitive after installing an update for .NET 2.0 Framework

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry

  • Satellite keyboard is not working and flashes the command prompts

    Hello world. I hope someone can help... my laptop has suddenly decided to some how turn off the keyboard. No key does not work. The touchpad mouse seems to work very well. Started once w7, a lot of windows boxes flickers between them. Command prompts to do the same thing and I cannot click on any admin agrees with the cursor ect.

    He will not simply accept. I tried the system restore ect but cannot place orders, when similar probs in Device Manager. For example, the cursor jumps oddly at the bottom of any list that I pull up and I can't ride him. The same things happen with another hard drive in the laptop. I scanned with several brands of security too... clear at all. IM wondering if its hardware, not software.

    I even re formatted the hard drive of w7 since another laptop and started again but still the same thing. I have also attached another keyboard to the live system with the same problem. USB keyboards work but still control problems. USB mouse even.

    Thanx

    I understand your question, the internal keyboard does not work, but you can use the external USB keyboard properly... don't you?

    Well, in this case, the question is clear to me: the problem is caused by the fault of the internal keyboard.
    From my point of view of the few he has no alternative option but in order to replace the internal keyboard.

  • EliteBook 1020: External keyboard does not work in the form of Bitlocker

    We had a few HP 1020 and 1040: models recently, and all have the same question. When the laptop is connected, the external keyboard does not work in the form of Bitlocker. It works in the BIOS and in Windows itself, but not in Bitlocker. This means that we must open the laptop screen to enter the Bitlocker pin, then let it open and GPO that dictates the computer into hibernation when the lid is closed. We have twisted the GPO, but in vain. Anyone else seen elsewhere or a solution?

    If the bios is up to date, I would look at the BIOS settings. I think that Fast Boot is enabled in your case, this may cause usb devices not to see in the stadium that BitLocker requires

  • Satellite L500 - keyboard does not work

    Hello

    I have Vista L500 with a dead keyboard. This machine has not been abandoned or anything it is spilled on it. I plugged USB keyboard external that works. The laptop keyboard does not work. I flashed the BIOS, update drivers, held shift for 10 sec (read on another forum), reset computer, check the updates of Windows Vista and ran 3 checks of Virus.
    Everything is perfect, just no keyboard?

    What should I check? What is a motherboard problem?

    Thanks for any help :)

    Hello

    Can enter you the BIOS (F2 key) with internal keyboard?
    If it isn't the internal keyboard seems to be defective and must be replaced

    I don t think you can do more. I mean you've tried everything what is possible and if an external keyboard works the installation of the OS should be ok.

    The keyboard can be ordered and replaced from an authorized service provider. Do you know how to contact the guys?

  • Re: Satellite Pro L500-1PU - internal microphone does not work

    I have a Toshiba L500-1PU, running on 32 bit Windows 7,
    The webcam works perfectly, but the internal microphone does not work correctly.

    I had an external microphone, so I had not noticed this problem when I am on Skype, but I recently discovered that when using the webcam of the person at the other end can hear weak my computer noises when I play music or watch a video clip.

    How can I fix this and get my microphone working properly I can control the volume and actually get a full service my laptop otherwise decent?

    Thank you

    Hello

    Perhaps this Toshiba FAQ might help you:

    + Hissing on the Satellite L500 +.
    http://APS2.toshiba-tro.de/KB0/TSB0402UB0001R01.htm

    It s are the parameters.
    This problem occurs if the volume of the microphone in the speakers properties is enabled.
    After you turn off this point the issue with Larsen is no longer in effect.

    I hope this helps!

  • Satellite Pro P300 PSPCDE - internal microphone does not work

    Win7 Professional 64 bit German

    Helllo Forum,
    The problem seems simple but its delicate. The internal microfone is not working.
    I cannot find any topic in the deivce Manager.

    Is there perhaps a way to activate the Mikro as FN + X?
    "I've tried the standards such as ' Start +" Mikro ", right click on the speaker icon...

    Is there someone who had solved the same problem?

    IAM running low on ideas...

    Thank you

    How did you test the internal mic?

    Usually, the internal mic belongs to the internal webcam. So have you tested this in relation to the internal webcam?
    Pre-installed webcam software allows you to create movies and pictures. The film can be recorded with the sound and the internal MIC is used for this

    In addition the internal microphone should appear in Control Panel-> sound-> recording tab
    If it s not visible, then you must right-click and must check the options; Show hidden devices, see the disabled devices. You could activate the internal microphone and this could make as default device.

  • Satellite S50T-B - internal microphone does not work

    I have never attempted to use the microphone before today, so I don't know if it's a question that has always existed or barely took place recently.

    I have Windows 8.

    The internal microphone is not working I have a microphone with my recording devices menu. There are currently enabled, and another one that says that it is not plugged. This second microphone appeared after that I uninstalled the driver Conexant Smart Audio that was suggested on another forum.

    Currently, I use Microsoft windows HD audio device and outside this second pilot disconnected microphone in the sound menu. When you use the registered sound software sometimes I hear a click and when I click on the menu of the bar beside the microphone fills.

    I can't take the laptop where I brought what I moved the country after purchase.

    Hello

    As I m not wrong not the internal mic belongs to the internal webcam.
    From my understanding, you need to activate the webcam in Windows settings

    Open the camera app Point to the lower-right corner of the screen, move the pointer of the mouse to the top and then click settings. Click on Options. Here, you can adjust the settings for each option.

    As I m not wrong there, you should be able activate the microphone on or off.
    Finally if you want to use this microphone, you must set its default value in the sound? recording device tab.

  • HP Pavilion g7-1365dx: wireless keyboard does not work.

    I have a combination and connected mouse microsoft wireless keyboard to my laptop.  The mouse recently 'died' and replace the batteries with new Energizer batteries did not help.  I bought a new Logitech mouse and installed the new USB connector and the mouse worked flawlessly.  However, the wireless keyboard does not work now.  If I reinstall the 'old' or the original USB, the wireless keyboard connector works fine.  The new mouse does not work with the original USB connector.  So now I have two USB connectors that are connected to the computer to make the functional keyboard and mouse.  Is there a solution to eliminate one of the USB connectors?  I realize that the brand of the mouse and keyboard are different.  This is the problem and if so can it be fixed?

    CJB - 10 wrote:

    I have a combination of microsoft wireless keyboard and mouse connected to my laptop.  The mouse recently 'died' and replace the batteries with new Energizer batteries did not help. I bought a new Logitech mouse and installed the new USB connector and the mouse works perfectly.  However, the wireless keyboard does not work now.  If I reinstall the 'old' or the original USB, the wireless keyboard connector works fine.  The new mouse does not work with the original USBConnector.  So now I have two USB connectors that are connected to the computer to make the functional keyboard and mouse.  Is there a solution to eliminate one of the USB connectors?  I realize that the brand of the mouse and keyboard are different.  This is the problem and if so can it be fixed?

    Hi ECJ-10,

    Well, you answered your question yourself. They are different products, so you need 2 USB receivers.

    The alternative is to get a replacement of microsoft mouse if it is still under warranty, they usually do.

    Hope this helps.

Maybe you are looking for

  • Is no longer able to follow links to local files.

    In previous versions of firefox (28 and earlier) I was able to follow the links of local file with white list in the preferences of the user of the file as described here: http://kb.mozillazine.org/Links_to_local_pages_do_not_work This feature has st

  • Carrier of ink does not work; stop the printer.

    Printer is new; Model is 7520; Serial number: {Private Information Removed}. New XL Black ink.  The ink cartridge seems to be sitting on the right; However, the printer stops and I don't know how to start.

  • If you open/view display the colors that you see a color-block how to change you the choice

    You want to bring a region a color for you the view menu and choose Show colors.  You see the color of each box.  How to change the color of which is in color?  If you want a piano black how can I change one of the other colors to black?

  • no disc

    How is it that I don't have a copy of my system opating (windows 7 Home premium sp1) disk? I don't have to buy another copy of the disk to use.

  • BlackBerry Z10 can import contacts from Mac address book

    Hi, just bought a Z10 and try to put up with my contacts, calendar, music etc from my Mac. Downloaded the latest version of the link (1.1.1 build 35) and have successfully syc had my music. However, synchronization of calendar and contacts does nothi