R61 stops when the VGA cable is inserted

Hello

I have not hooked my laptop to a projector for more than a year and now when I insert the cable into the VGA slot that the laptop stops! And even if it is still connected to power, ALL lights on the computer off. I have to remove the battery and reinsert it to restart the computer. It's probably an electrical problem right?

Any suggestions?

Thank you

try to remove the cable problem, you have another vga cable to try? Also, can you try plugging the vga of the notebook to another screen?

Tags: ThinkPad Notebooks

Similar Questions

  • Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.

    Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.   I need the laptop screen too.  It started just after years of correct use.

    Original title: VGA:

    In Panel > all items in the control panel > display > screen resolution you should be able to see the two devices / displays and be able to set options...

    http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  • Satellite U - Touchpad stops when the ethernet cable is pluged

    Currently I am facing problem with my touchpad. When my ethernet cable is pluged in my touchpad no longer works, and as soon as I remove my ethernet wire touchpad started working. Earlier when I plud in power with pluged wire ethernet cord in the touchpad used to work, but now the tht has also collapsed.

    Pease help me guys CIHI.

    Thank you

    > When my ethernet cable is pluged in my touchpad no longer works, and as soon as I remove my ethernet wire touchpad started working.

    Hmmm... strange question. Maybe, it's driver conflict problem. In any case, try reinstalling driver Lan and touchpad. Before you update, edition of lan and touchpad drivers (usb mouse may be necessary after edition touchpad driver). If there is still problem, restore the settings from the factory with a recovery disk...

  • When I connect my laptop to my TV via the "vga" cable, the color red does not appear on the TV screen.

    Color problem

    When I connect my laptop to my TV via the "vga" cable, the color red does not appear on the TV screen.

    Problem with the video card, cable or tv.  I will try to update the video driver first.

  • Plug the VGA cable causes the crash or black screen on my Thinkpad. Help!

    On my newly purchased W530, a cable VGA-causes a crash or a black screen on my Thinkpad.

    The foregoing happens whenever I have insert the cable VGA which is quite annoying, because I use it with my projector every day.

    Accidents seem to occur more often when I closed the lid and insert the VGA cable. If I open cover more often get a black screen (which remains black even when I leave the cable again).

    I could try to fix this problem?

    Which driver (or other) would be the most likely cause?

    Thanks Adam! :-)

    Yes, as I mentioned, accidents have disappeared after installing the latest driver Nvidias own site.

    Remaining problems are small problems which I can live with to what NVidia fixes if all goes well with an updated driver.

    But it was really great to see instructions on how to start in safe mode on Windows 8. I always wondered who. Thanks again Adam! :-)

  • Satellite Pro L500 - stops when the power cord removed

    Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

    Someone please help. I have not installed anything new.

    Hey,.

    For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

    I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

    You can find a list of all FSA here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    Good luck! :)

  • Of crashes/blue Equium A60 laptop screen when the LAN cable is in?

    Hi all
    I have a laptop Toshiba Equium A60 which now extends for less than a year.
    I am running WinXp Sp2

    Yesterday, my laptop started to plant flashing a blue screen (not the time to see what he says that the computer reboots too quickly).

    I found that only apparently failed when the network cable is connected for example if I start the laptop, it will be put in service as usual, but when it starts to communicate with the network/router (I see glancing at blue screens in the lower Task Bar to the right), it crashes. I tried another port on the router but no luck.

    Is my network card: Realtek RTL8139/810 x Family Fast Ethernet NIC

    It works well in Safe mode and doesn't crash.

    I updated the driver but and it's always the same.

    I then decided to restore my laptop to factory/day via the Toshiba Recovery DVD.

    When it worked fine all day restored (had internet access via the network) until I clicked on: set up a home network or small business in the control panel. He crashed again in the same way. Now it will crash repeatedly like above.

    This could be a problem with my cable?
    Help, please... Any ideas?

    Thank you for the charges,
    Shay

    Hello

    If the network connection works fine, it is not necessary to set it up again. I guess there are conflicts and the unit freezes. In my opinion there is no problem with the hardware or with your cable with the network settings.

  • Satellite Pro L10: CMOS clock stops when the OS is not running

    Hello

    We know a reason why the cmos clock would stop when the operating system does not (phone off), the laptop is 18 months old, I've updated the bios tries to give him a good boost, but no effect, he was also in charge for 24 hours.
    Any advice would be great.

    See you soon
    Paul

    Hello

    Usually if the BIOS date/time is wrong and always changes, the RTC battery which is mounted on the motherboard fails.
    In this case the CMOS battery needs to be changed or maybe only removed for awhile

    If your laptop is 18 months, the guarantee must be valid.
    Generally if you have registered on the page of Toshiba notebook the warranty covers all repairs for about 2 years (24 months).

    In this case, I would recommend contacting ASP in your country, because the technician must be able to solve this problem very easily.

    Good bye

  • MacBook Pro stops when the lid closes, loses the open tabs and background image...

    Hi all

    I recently had a new hard drive installed in my 2012 13-inch MacBook Pro. I am running El Capitan 10.11.2. Since then, my computer cuts automatically to the bottom when the lid is closed, losing all Web pages, and for some reason, some background, I've saved. (My browser is Mozilla Firefox and it prompts you to restore me the tabs lost, which he will).

    The led standby does not blink or light up when the computer is turned on, it will turn on only at startup. At startup, the login page is displayed, and after that I entered my password it takes about 15 to 25 seconds to load and open my account. What is going on?!

    Summary:

    Stop when the lid is closed,

    Loses the background image & open Web pages.

    Standby blinks only when starting,

    Time of loading extended after logging into my account.

    Any help would be greatly appreciated! Thanks a lot for reading.

    uhlexia wrote:

    Hi all

    I recently had a new hard drive installed in my 2012 13-inch MacBook Pro. I am running El Capitan 10.11.2. Since then, my computer turns off automatically when the lid is closed.

    Take it back to the repair as well as your receipt of repair shop.  Apple has a 90 day warranty on all repairs.

  • Satellite A200 doesn't stop when the power is connected

    The Satellite A200 just stops, if the power cable is unplugged before you stop. If the laptop off and immediately restarts (max 5 seconds between stop and restart).

    Anyone has the same strange problem?

    Hi Thomas

    You should definitely contact the ASP in your country. It is maybe something wrong with the electronic power supply on the motherboard of s specifications.

    As said John replacement must be done for free because the A200 is a new series and of the guarantee must be valid.

    Good luck

  • New Yoga 14 stops when the lid closes

    I just got a new series of Yoga 14. Sometimes, but not always, the laptop stops when I close the lid, even when it is plugged. I already looked at the option to 'choose what happens when the lid is closed' and it is set to sleep, no downtime.

    Any ideas on how to solve this problem.

    Hi Nickajeglin,

    Welcome to the Forums

    According to the request, we understand that you are facing problem with the system stops when the lid is closed in your Lenovo 14 yoga.

    As you mentioned that you have changed the setting to sleep, try changing to do nothing option and check also the question, if still the issue persists then uninstall and reinstall the power management and check the issue.

    Click here to for 10 windows power management.

    Let us know the result.

    Best regards

    Ashwin.S

  • While the loop does not stop when the two values are equal using equal to comparitor

    Hello world

    I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

    However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

    It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

    I am very confused!

    See you soon!

    Search on: comparison of floating-point numbers

    The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

    Mike...

  • Explorer.exe stops when the computer is shut down

    Explorer.exe stops when the computer is shut down

    Hi DickKimberley,

    ·         What exactly happens when you try to shut down the computer?

    ·         You receive an error message error code?

    ·         Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check.

    Advanced Troubleshooting for shutdown problems in Windows XP

    http://support.Microsoft.com/kb/308029

     

    Method 2: If the method above doesn't follow the article mentioned below.

     

    Windows stops responding during Windows XP shut down

    http://support.Microsoft.com/kb/307274

    Let us know if that helps.

  • computer Vista laptop does not stop when the lid is closed

    I have all the correct power settings. mode when the lid is closed, I tried setting Hibernate and sleep. It just keeps running and running, I'm afraid it will overheat. but it should stop when the lid is closed, correct? Thank you sissy

    Hello banditpunpun2,

    Thanks for the return of the response.  I also go to your manufactures website and confirm you are updated with the lates drivers, updates the firmware and BIOS.  I even watch the forums on the manufacturer's Web site to see if others have experinced the same question.

    Please let us know status.

  • Should I connect to the display, the vga cable and dvi cable at the same time. HP 1110 FP7

    Should I connect to the display, the vga cable and Dvi cable at the same time. I have a FP7 1110

    UNUSED - a connection only (from the source of the same cylinder head box) - always!
    DVI has better quality.

    C.

Maybe you are looking for