R61i; audio device after loading sp2 May 30 problems

Similar Questions

• Tecra 9100 - no audio device after XP Pro install

  The audio device does not appear after installation of xp pro sp2 on Tecra 9100.
  I tried allsorts to research on forums and websites.

  I found install them drivers on this site but used to my laptop.
  I need to locate the audio device before get drivers?
  I know this is a very old problem but I tried for 12 months with no result.

  Any help appreciated.

  WOW!
  You are still using the good old classic? Surely she s or it was a nice laptop but maybe it's time for something faster? ;)

  Back to your question;
  On the European driver Toshiba page, you can find drivers Tecra 9100.
  You should look in the Archive (in product type click Archive instead of the laptop)

  There are two audio drivers for Win XP.
  She s Yamaha audio driver version
  -5.12.01.3141
  -6.13.10.2152

  I guess the 6.13.10.2152 is a more recent who is available and I think that you should use it!

• P6 2475 ea no audio device after update

  Hello, my desktop PC HP Pavilion P6-2475EA, AMD A8, 3.2 GHz running Win8 lost its audio after an IDT High Definition Audio Codec update failure. Look in the Control Panel, the IDT device is considered taken ok, if I check the audio devices - there is none. The speaker icon is red with a cross. I tried to reload the original device driver & that makes no difference, I also tried the latest driver - no change. It was working fine until I was invited to be updated - yuk.

  Any ideas - ciao Tom

  You are the very welcome, Tom.

  Sorry, that didn't work.

  Something does not seem just to get a system restore disk error, and now the checkdisk is frozen.

  Unfortunately, I don't have any other suggestions for you to try.

  If the checkdisk remains frozen, you won't the choice but to shut down the PC and see if it will reboot.

  I wonder if it is possible the hard drive failed on you.

• Satellite A200 - no audio device after the awakening of the mode 'sleep' or 'putting into hibernation'

  I own a Satellite A200 laptop computer with Windows Vista.

  Sometimes when I put my laptop in 'stand by' mode or 'Hibernate', he wakes up with no audio device. (Error - no installed audio device). The problem is solved by restarting my computer, or by placing it in the back to 'stand by' and turning it back on.

  I reinstalled my OS using the recovery cd - and the exsists yet problem.
  (Version 1.30, Audio bios driver ver. 6.0.1.5374)

  Is this a known problem or is it just my computer? I'm afraid that it is a hardware problem. (The laptop is less then 1 month).

  Thanks (and sorry for my "rusty" English :-()

  Tomer

  Hi guys

  Can you please check this Microsoft article? Maybe this will help.

  http://support.Microsoft.com/kb/929685/en-us

  By the way: is your A200 with or without built-in webcam?

• No audio device after re-installation of xp pro

  I just reinstalled xp pro on an old pc Tower, everything works fine apart from no sound device?, I read a number of responses to this topic here, but none of the solutions seem to work: (, downloaded and installed the driver ac97 and Realtek codec, but still shows don't not an audio device?, any help much appreciated) Thanks :)

  Hi Robert,.

  This all the troubleshooting steps you have done?

  The Fixit Audio running can help get the audio problem solved.

  Run the Fixit and check if it works.

  http://support.Microsoft.com/mats/AudioPlayback/

  Answer please if you have any questions.

• "No Audio device" after the on-board video uninstall

  "No Audio device" said "Sound and Audio Devices Properties" Windows XP Pro sp3.

  I think it started when I installed the first graphics card in the PCI-e slot of my Presario SR1913WM mother board.

  Before installing the video card drivers, I took some advice to uninstall integrated video card.

  Now I have no sound.  I have to re - install drivers NVIDIA GeForce 6150 for THE motherboard?

  I tell myself that if I do, I can re - install the Realtek drivers. I uninstalled them think today I could install as I did a few years ago (but now MS Update does not offer me all Realtek drivers).

  And do I have to uninstall the list in Device Manager for ' AMD high definition Audio Device "(I suspect it could be the video card drivers)?

  Here is the record of SR1913WM.

  Hello:

  I noticed on the specifications that you have validated your new video card, it has a HDMI port, correct?

  Well, what happened is that your PC think that you have installed not only a new video card, but also a new card audio and it disabled the embedded video and integrated audio system. Video card you have an audio chip embedded HDMI (AMD HD audio's HDMI).

  So, all you have to do is go into BIOS and find the onboard audio setting.

  It will have the value auto or off.

  Change the setting to "Enabled". Save it by pressing the F10 key at this time here and again when you exit the BIOS (save settings and exit).

  On reboot, everything will be fine again.

  Paul

• "No audio device" after reinstalling Windows XP

  I recently reinstalled Windows XP on my laptop Dell Inspiron 9400.  This laptop has Sound Blaster Audigy Advanced HD Audio integrated.  The sound worked fine before the reinstall.

  Now I have no sound (other than the boring system beeps) and I get an error message that there is no audio device whenever I try to play an audio file.

  I tried to reinstall the drivers from the CD of origin and on the dell download site.  For both, to Midway through the installation it stops and tells me that there is no audio device.

  When I look in Device Manager there is no audio device listed and when I go to the components section of system of information there is no audio device.

  Any ideas of what I can do to force the computer to recognize the processor integrated?

  I ended up resolving this issue.  It is not enough to reinstall the Sound Blaster disc.  There was another driver who had to be downloaded from the Dell website before Sound Blaster could even see the audio device.

  SIGMATEL - pilot - applies to the STAC 92XX C-Major HD Audio

  The Dell Web site lists this driver option, but it obviously wasn't.  As soon as it was installed my audio device has been found, and I was able to install the Sound Blaster CD.

  I hope this helps someone else.

• Windows does not recognize tv as audio device after it has been turned off and turned back on.

  I have my computer hooked up to a HD TV with the HDMI cable.  The sound also pretended on television.  The HDMI cable is connected to my Radeon HD 6950.  I use Realtek HD Audio Manager with the ATI HMDI default Audio device.  All records are up-to-date.

  When I put my TV off and leave the computer running, I go back and turn on the TV and the computer behaves as the TV is not plugged, but only for audio.  The video is still there.  In the audio playback window, I noticed that Windows would go to the optical audio device, even though there is nothing plugged into this Jack.  I disabled all other devices and left only the HDMI device, so it will not move on.  Now when I turn on the TV it is just like nothing is plugged in at all for the audio.
  Any help is greatly appreciated!

  Hello
   
  1. What is the brand and model of your computer?
   
  2. which edition of Windows are you running?
   
  Example: Windows 7 Professional 32 bit.
   
  It could also be a possibility that a manual entry is required from your TV to the HDMI connection, please check your Menu\setting where the HDMI and PC connection is checked once it is connected to options to switch the Audio and TV screens.
   
  Please follow the steps mentioned below to help solve the problem.
   
  To disable improvements audio speaker

   
  a. open sound by clicking on the Start button, then Control Panel. In the search box, type soundand then click on sound.
   
  b. on the playback tab, click speakers, and then click Properties.
   
  c. click the enhancements tab and then select the check box turn off all the improvements .
   
  If you do not see the enhancements tab in the speakers Properties dialog box, these features are not available for your speakers, and this procedure is not applicable to your computer.
   
  If disabling audio enhancements solves the audio problem you are having, this indicates usually that your audio driver needs to be updated.
  
  Reference:- why don't I hear audio when I connect my computer to a HDTV?
   
  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions
   
  I hope this helps.

• No audio device after you install windows 8 in dell latitude d610 how can I fix

  Just installed Windows 8 in Latitude D610... no audio device comes silent... y at - it an easy fix?

  You have posted a question of Windows 8 in a forum for Windows 7 .

  Repost in Windows 8 here forums

• Laptop crashes after loading SP2 for Vista - stuck at 0%

  I downloaded the SP2 for Vista and now my phone is blocked 3 of 3 update after reboot. It is stuck at 0% complete. How to spend it?

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Windows XP Home, black screen after loading screen (seemingly unique problem)

  Hi all

  I am trying to upgrade to service pack 3 Windows XP home on my old computer from eMachines T2838 and experiences a @# *! a time to do it. This is the third time in 2 days I had to wipe my HD and re - install XP, because of some problem installing updates which has damaged the operating system.

  Here's my current situation.

  Yesterday, after the failure of the HD for the second time (computer got stuck "performing cleanup" on SP2, forced a reboot, got a restart loop after, would not load Windows) I installed XP, update to SP2, then downloaded the service pack real itself. He has installed fine and asked me to restart.  I respected that, and the computer restarted. As soon as the "Loading" screen popped up, I knew that something had gone wrong.  When I started on the desk, I was stuck in 640 x 480 w / 4 - bit color graphics mode. Could not be set. So, I thought, okay, let me reboot Windows and see if he "rediscovered" the integrated video card. Well, I restarted, and the "loading screen jumped into the appropriate color mode / resolution, so I thought that I was in the green."  Well, after that, all I get is a black screen. No message 'No signal!' or anything like that.  Even tried a few instructors that I have. Looked around online, has seen the references to "Last known good Configuration" 'safe Mode' etc etc.

  I tried all the options on the list of F8. Either she freezes at Mup.sys xxxxxx or boots up to the loading screen and then goes black after. I can hear the HDD does it's thing for a bit, so I don't know it is loading this screen "check to activate the automatic updates" which appears after SP2 is installed, but I can't.

  Use the recovery console, (did the repair option the first time after it kept restarting, Windows took 5 minutes to start an IE6 get locked every opening, so had to wipe and re-install) typed "chkdsk/p/r" and he did his thing for about 30 minutes, rebooted and still have the same problem.

  I don't know what else to do. I REALLY want to redo everything this a fourth time, only to to have screw it up once again, and I don't know how many times I can use the key I have on the back of the computer.  (Using a retail disk and an OEM key, Finder product key changer.) -A Microsoft Support Officer showed me that one. Quite handy.

  People do you have any suggestions?  I would really appreciate it.

  Hello

  Try the steps listed in the link below and check if it will help: computer stops responding with a black screen when you start Windows XP: http://support.microsoft.com/kb/314503

• error codeC00D4EF4 can not play, no audio device, how can I solve this problem?

  I have no sound. the speakers are plugged a work but no sound. HELP!!!!!!!!!!!!!!!!!!

  Hello

  1. when exactly you get this error message?

  2. what operating system is installed on the computer?

  3. What is the brand and model of the computer?

  4. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps from the link below and check if they help to resolve the issue.

  No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Hope this information is useful.

• Audio device problem on Windows 8 64 Y510

  Hello dear readers. I have a lot of problems with my audio devices after the operating system upgrade to windows 8 on my lenovo y510. First of all default settings and drivers that I am working as any other failure, are evidence of each pair of speakers (this particular machine has 2 x 2 speakers and a subwoofer) as different devices on my audio settings. This of course means that I can only listen to one channel which is frankly frustrating...

  I tried to update the realtek drivers, and after restarting, I as a single device. With the help of those who suggested on lead lenovo horrible failure page, so I don't even bother. I think that this may be connected to the lack of software Dolby Home Theater, but all attempts to install it gave rise to a message "pceee is not installed.

  Did anyone of you had similar problems on this laptop in particular?

  TL; DR I would spend devices 5 speakers 3 in peripheral location 5 1 speakers

  TIL: I'm a fool.

  Well, turns out I found that my original drivers for Vista work like a charm.

• No Audio device listed on a reinstallation of Windows XP

  Audio device

  My computer crashed the other day, and we had to re-installed in the plant, or any.

  Under the heading sounds & devices Audio, he says no. Audio Device?

  Large.

  Your eMachine T6520 has a built-in audio device Realtek, unless you added another separate audio card (did you?).  I don't know if you do something in the BIOS to enable the integrated audio system.   It's a good machine.

  If XP is not seen the audio device, it could be a hardware problem and I know that eMachines has now a good technical support, e-mail and chat.  You must discuss and get an incident number will make reference to the case where/when you are disconnected while you restart your machine to test.

  If you tell them that you have no audio listed in msinfo32 or Device Manager, they should be able to help you.

  These other guys here can have some ideas to see if you can help XP 'discover', but at least now you know what you have.

  You can see if the driver Realtek download and installation will help to "discover":

  http://support.gateway.com/us/en/EMAC/product/default.aspx?tab=1&modelId=1645

  If not, discuss with the eMachine people, tell them that you have audio, you reinstalled it, now you don't have no sound, nothing listed and please help.  If you don't get help, unplug and chat with someone else who's going to help you (it may take a few tries on Friday night).

  If you poke around this area on their website, you will also see that your MSI Radeon driver is also a bit out of date (they have a newer version).

• How can I get the USB Audio device in option audio device for Windows XP?

  USB Audio will not appear as an option. However, the Audio USB headset is an option. Help. Thank you

  Hi VincentMr,

  ·         What is the brand and model of the USB audio device?

  You may need to install the device drivers on the device manufacturing site, or else you must have received the CD of the software with the device.

  See the following article for more information on the update of drivers:

   

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Let us know the results.