R6400 after the firmware update, genius says WiFi connectivity not active... but I have wifi...?

Similar Questions

• Try to upgrade OS 10.6.8 to El Capitan on iMac. But the FREE update tells me it can not install but will not say why even when I click on learn more. Suggestions? Help?

  Try to upgrade OS 10.6.8 to El Capitan on iMac. But the FREE update tells me it can not install but will not say why even when I click on learn more. Suggestions? Help? Appreciate the assistance.

  More details on the iMac you have and how much RAM is installed would certainly contribute to answering your question.

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• After the major update W10, Acrobat 9 will not document "% [ProductName: distill] %% found Calibri, using Courier." %% [Error: invalidfont;] "[OffendingCommand: xshow] % '.

  After the major update W10, Acrobat 9 does not create a document not found 'Calibri '.

  It worked doesn't mean anything. 'Inconsistent' means that it was not tested, nor is it updated to work with this version, as it is updated, which can result in what you feel. You can try to run the application in Compatibility Mode, but the chances of work without problems are slim. The real solution is to upgrade to a compatible version.

• Satellite A200-23U - DVD - ROM problem after the firmware update

  Hello! I have A200-23U (TSSPcorp CDDVDW TS-L632H). I day first TO02, then TO03 firmare. No error has been shown. After the reboot, my device is locked (is not open / eject button or by any software) and ImgBurn (for example) can't find writers. In system devices now it is shown that:
  IDE\CDROMTSSTCORP_CDDVDW_TS-L632H___*boot*___\5&1AC5D6C0&0&0.0.0 (I think that there must be * TO03 * not * START *)

  What is the problem and how can I solve this problem?

  PS. sorry for my bad English)

  You can try to reflash the drive down to T02 OR you send the machine to an authorized service provider or they fix this problem.

  Could first check if the downgrade works?

  Welcome them

• Wan interrupts the connection after the firmware update

  Looks like the latest firmware upgrade is the source of the problems.

  I've just updated my timecapsule 1 TB of first generation version 7.6.7 and my 3 TB timecapsule new version 7.7.7

  Both are connected to the router of the provider of Internet services and extend the network even in my house.

  WiFi is stable until the upgrade, but now the connection is lost every few minutes or seconds.

  Both versions are later to the respective timecapsules.

  I end up having to downgrade if no solution is found.

  I powered the two market still nothing does not. Redefine the network and tried both hidden and not hidden, yet once nothing doesn't.

  Any ideas on what is causing the problem?

  Well, since nobody seems to have an explanation, and Apple are not out with firmware update after 7.7.7 and 7.6.7 I decided to downgrade the firmware to the previous version. I now run version 7.7.3 on the new 3 Tb Time Capsule and 7.6.3 on the 1st Gen Time Capsule. So far, the network is stable. Using WiFi Explorer Ii see that they use channel 6 and 8 respectively. Signal is strong and no dropouts have taken place so far. Hope the issue is resolved in the next firmware update.

  As I read in another post: firmware update does not solve a problem, you didn't. However, it can create a problem that you didn't.

• LaserJet Pro M1217nfw booting is not after the firmware update

  Hello

  My configuration:

  HP LaserJet Pro M1217nfw (USB connection)

  MacBook Pro (mid-2012) running OS X Lion 10.7.5

  My Odyssey:

  The HP scanning software included on the CD is rudimentary to say the least. In particular, it don't will not let me scan multiple pages and combine them into a single PDF file.

  Tried to scan printing & scanning with ImageCapture, an excerpt, and the pane in system preferences: they see any of the MFP.

  Uninstalled HP, reset printing system software, downloaded and installed http://support.apple.com/kb/DL907 according to the instructions on http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Mac-Lion-Scanning-Multiple-Docs/m-p/159... no luck.

  Downloaded and installed the latest HP software http://ftp.hp.com/pub/softlib/software12/COL32660/Im-80903-6/LJM1130_M1210_MFP_Full_Solution.dmg

  Installation goes OK, then asked the installer to update the firmware of the printer and I foolishly said yes.

  Result: the printer will not be in service longer. At the start, it displays "then to initialize... "with the Green (ready) and amber (caution) of fires, then LCD turns off, then"initializing... ". "all over again, to infinity. Needless to say that the HP software or the Firmware utility see the device more and in system preferences, it is listed as "offline". In a Word, it is bricked.

  Of course, I could use some good advice. Thanks in advance.

  Solution in another thread:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/LaserJet-Pro-M1217nfw-non-functional-after-firmware-upgrade/m-p/2323767#M36922

• Toshiba 40SL980G - the Youtube app after the firmware update.

  Hello

  So today, I've updated the firmware of my TV (40SL980G) and after the update of the youtube app is missing and also the social place of Toshiba places is not accessible.

  I did reset TV after the update.
  I checked the firmware download page, but this model is not which are listed there.

  Someone here could help me on how to solve this problem I would really appreciate it.

  They are probably going to change something in the places of Toshiba.

  If a new firmware update is available, try to install the latest version.
  Otherwise I recommend the service Toshiba Places in the next few days again.

• Frozen opening control and shutter button after the firmware update.

  I've updated my sony nex 6 to the latest version of the firmware 1.01. After that, I noticed sometimes my camera froze. The opening is indicated as - and the shutter button does nothing. I have to remove the battery and put it back to make it work again. Sometimes with my zeiss lens and more often with my goal of 18200LE. Not sure how to work around this problem and what is the problem. I've reached a point of almost fed up with my camera. Need help!

  The exact model is SEL24F18 zeiss 24mm f1.8 on the latest firmware. Camera and the lens are on the latest firmware. Sometimes, the camera shows the f-stop and I have to remove and replace the battery to operate.

• IX2 - dl does not start after the firmware update

  I bought my ix2 - dl last three days ago and then she starting with 2 new readers just to test it worked using Mac and Windows then a firmware update version 4.0.8.23976 appeared available via the web interface.

  After the update and reboot, it no longer starts with white LED blinking forever. I waited for 20 hours.

  The reset and power keys doen't work until the device starts as I suspect.

  Is it possible to install the old version of work or reset the dx2 another way?

  # The upgrade was successfully without interruption of power supply and interface asked to restart.

  I contacted the local support for RMA.

• After the firmware update, cannot add new reading lists

  I updated from 1.01.29 to 1.01.32 and noticed some changes.

  1. the layout of the directory of the Clip is a little different.  It allows to view the Clip in this framework, "Internal memory" and in this framework, records.  Now it's just the Clip, in this setting, files.

  2. all the songs in the video for the upgrade are not visible in the music folder or any other folder.  They are on the device, because I can play them, and they take place on the Clip.

  3. with the help of WMP11, I added a new reading list for the clip.  The finer transferred playlist songs I can see in the music folder, and the reading list does not appear in the playlists of the music (even if all the playlists of the firware update see the place very well).

  When you upgrade your firmware, the Clip reset USB mode (under settings).  Back to what you had before (PSG?) and you will probably be fine again.

  Note that now, from your description, have a few transferred to your Clip in each of the MTP and MSC modes (before and after the upgrade).  There is nothing wrong with that, except that your computer can only see what's on your Clip the content transferred under USB mode you are currently connected to your computer under.  And so he can that you want to remove your hardware update, redefine your USB mode on what she was before and then transfer to the back matter to your Clip.

• Rocket of freezing to rebuild the database after the firmware update

  Hello

  I used a Sansa Fuze since May this year, and so far I'm happy with it. If it were not for the updates of the firmware works do not somehow. I don't know what I'm doing wrong, but every time after you have installed the firmware newest, the player crashes to rebuild its database. So I'm stuck with what version of the firmware was updated in May 2009. Fortunately, I discovered the trick to read data from the player despite his messy state (in other words, put on 'Hold' and plug it into the computer by pressing on |)<), so="" that="" i="" could="" reinstall="" the="" old="" firmware's="" .bin="" file="" manually.="" removing="" the="" extra="" 8="" gig="" microsdhc="" card="" i="" bought="" with="" the="" player="" didn't="" change="" anything="" either.="" however="" this="" shouldn't="" be="" i="" think,="" and="" frankly,="" it's="" been="" annoying="" the="" heck="" out="" of="" me="" since="" the="" first="" time="" i="" tried="" updating="" my="" player's="" firmware.="" first="" i="" thought="" it="" was="" just="" because="" i="" didn't="" use="" sansa's="" updater="" tool,="" but="" instead="" downloaded="" the="" zipped="" update="" installer="" manually.="" but="" even="" when="" i="" installed="" the="" official="" program="" on="" my="" windows="" machine="" yesterday="" and="" updated="" my="" player's="" firmware="" through="" it,="" the="" player="" gets="" stuck.="" interestingly="" however,="" prior="" to="" updating="" the="" firmware,="" i="" formatted="" the="" player,="" and="" when="" i="" switched="" it="" on="" the="" first="" time="" after="" the="" update,="" while="" still="" not="" carrying="" any="" data,="" the="" rebuilding="" of="" the="" (empty)="" playlist="" worked="" fine.="" only="" when="" i="" copied="" my="" songs="" back="" on="" it="" today,="" i="" ran="" into="" the="" same="" difficulties="" as="" before.="" so="" what="" i'm="" going="" to="" do="" now="" is="" what="" i've="" done="" before,="" and="" manually="" reinstall="" the="" old="">

  Frustratedly yours

  carbeck

  OK, so I got another idea just half an hour ago and plugged in my drive. My computer would easily display the files it contains, without having to resort to tricks like the one described in my previous post above. I thought that since I read that the "rocket" is a bit picky about the format of the tags, I look to those of mp3tag. I went and spent all the tags to ID3v2.3 (iso-8859-1, how backward ), delete all the comments in the files and also adjusted the number of tag to include leading zeros instead of the format "1/n. Indeed, my drive didn't have the hiccups more after the reboot. Files that were previously listed as 'Unknown' is classified in their good artist and album and probably all of the tags appear in the correct order. Yay!

• WRT54G2 problem appears after the firmware update

  Hi everyone, a newbie here. Nice to meet you all and thank you in advance for your help.

  Here's my problem. I have updated the firmware on my router for 1.0.04)is Sunday, and then there are problems on my router.

  1 have a weaker signal.

  2. the router cannot detect my internet just as it has been in the past. I have to type in my PPPoE setting for example my user name and password in 192.168.1.1. Furthermore, I use AT & T DSL.

  3. my internet will totally drop off after several hours. I have to reopen it and the modem power on & off switch.

  So I want to know if I can downgrade the firmware back to 1.0.01 or is there any other setting that may help me get but it? A list of steps is better.

  Thanks again in advance and have a nice day.

  If you haven't already done so, try to do a hard reset, hold reset button of the router for at least 30 seconds with the power connected to the router, and then reconfigure as needed.

  Since I use your & AT T DSL, you can reconfigure the DSL modem, so it don't the PPPoE connection and then reconfigure Type Automatic Configuration - DHCP Internet connection router.

  There is another question that may arise with an AT & T DSL modem. My Speedstream 4100 & AT T DSL modem put the IP address 192.168.1.1 for the router WAN/Internet port. If the router is configured to the default settings, there will be a conflict between the modem and the router and none of router devices connected will be able to access the internet. The solution is to change the IP Address of the router to the router on 192.168. 2.1. Restart all router connected devices after you have made this correction.

  Also with some model WRT54G2 (happens on my router WRT54G2 V1) the wireless signal will go offline when a wired computer is started. When this happens, the work around is the power cycle that the router once the wired computer has started, or log in to the router, go to basic wireless settings page and click on the button Save the settings. Then the wireless signal comes back to the top and wireless devices will resume their connection.

• LifeCam Studio has stopped working after the firmware update?

  Hi all.

  I bought one of the new LifecamStudio 2 days ago. I installed the camera, following the instructions of course. At the end of installation, I was able to get my self in the window of the Lifecam software, up to now, no problem, the device worked. Suddenly, a pop-up message will appear, telling me that the firmware of the device should be upgraded, then I pressed OK. The update of the firmware started but was abandoned shortly with an errormessage, saying the upgrade was not successful. I tried to reinstall the firmware, but now he tells me Hat I have the latest firmware installed. The nproblem is therefore now that, when I instert my camera in USB port windows find the camera, but as soon as I start any program it uses the camera he's leaving a Lifecam icon (in the hardware Manager that is) to an unknown unit. Software Lifecam studio told me that there is no camera installed. I installed the camera on other computers without a bit of luck.

  / Stefan

  Fixed it :)
  In the Device Manager under imaging devices I've seen "Webcam" - before the botched fw update, it said 'Microsoft LifeCam Studio' and was a diff driver.  I rolled back the driver (or if it does not work you can force it to use one of the program files \ lifecam) then reinstalled lifecam - my cam works now.  Now - what's the problem with this update utility and why it changes what is driving the camera uses?

• 6921 IPPhone does not register after the firmware update

  Hi all

  We try to update the firmware 6921 phones.

  We have CUCM system version: 8.0.3.20000 - 2

  Current firmware on the phones of SCCPS 6921 is SCCP69xx.9 - 0-3-0.

  We tried to upgrade to SCCP69xx.9 - 4-1-3 SR 1, but the phone will not register with this firmware.

  As we modernize cucm to 10.5 (1), we woud would have all put phones upgraded to the version of the firmware shipped with cucm 10.5 (1) before the cut above miniimize downtime.

  Any suggestions will be helpful on how to solve this problem.

  Thanks in advance

  Hi Ravi,

  I guess you have to download the Pack of the device if you want to use 9.4 (1) SR1

  9.4 release notes (1) SR1 say that

  Before installing the version, check that the device Package Cisco Unified Communications Manager is installed

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/cuipph/6900_series/firmware/9-4-1-SR1/Release_Notes/P690_BK_6AA8901D_00_6900-series-release-notes-9_4_1sr1.PDF

  Now if I see the Compatibility Pack device matrix, it's for CUCM 8.5 (1), but in your case, call Manager version is 8.0.3.20000 - 2

  http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/compat/matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix_chapter_00.html#CMDP_RF_C6E2BC42_00

  regds,

  Aman