R7 hanging up on reboot

Similar Questions

• to hang GOLD continuous reboot on startup XP pro logo

  Windows XP Pro Edition - fully implemented to date.  Boot hangs after a few seconds of movement in the blue band activity of widows Logo.

  Disabled to re-boot automatically and cleaned and defragmented hard drive.  CHKDSK used to check/repair hard drive.

  Boot in safe mode works correctly in Safe Mode, Mode safe mode with networking Mode and safe mode with command prompt.

  When it is in Safe Mode, re - configure MS Config to "Diagnostic Setup" to try to identify the problem, start starts a continuous loop; He re - start immediately shows the Windows Logo screen.

  Search knowledge base, have looked at and tried these tips such as using Alt + Tab to hang it up to 'confirm the error message' - no result

  Insured graphics drivers are up to date.

  With the help of safe mode and the Device Manager to disable the adapter. restart and reinstall the display driver - no result

  Any advice will be appreciated.

  With that much crashing and now I know Mode without failure is also problematic, looks like you have a harware problem, maybe faulty RAM. Do you know how to solve hardware problems?

• My printer will no print only once, then hangs until I reboot

  I have Windows 7 and printer Dell V515w.  I have had this problem for a few months and have dealt with him by restarting the system, how the files in the queue than any print.  I have seen that some people have problems with Internet Explorer 11, but that happens with anything that I feel.  The 1st file I have print will work, but the following files get stuck in the queue until I reboot.  I know this printer worked on my XP computer and do not remember when this first became a problem (I rarely print at home).   I loaded the drivers updated from Dell, but that had no effect.

  Hello Edmacias,

  Glad to know that you were able to solve the problem with the printer.

  I appreciate really all your efforts towards the resolution of the problem.

  Since you have uninstalled Internet Explorer 11 and be left with Internet Explorer 8 in the system. I suggest you upgrade to Internet Explorer 10.

  Please follow the steps in the link provided below and check if that helps.

  Update for Internet Explorer 10 in Windows 7

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=39232

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Movies created with Windows DVD maker, hang up or restart

  I used DVD maker several times in the past without this problem.  Recently, I tried to burn a DVD, and a 10-minute clip that was just started.  I reburned the DVD, without this clip, and at around the same point in time, is the same thing, is not the file.  I tried to burn another DVD, with all the clips of orignial, without any other files or programs, and this time there were several hang ups or reboots.  No idea what is happening and how to fix it?

  Thank you for your comments.  I did not use Movie maker to make the DVD, I was using DVD maker and it has worked well in the past, with the same type of video files that I currently use. I don't think I did any changes since I modified a DVD burned, but it is possible.  I'll try to remove the filters and see what happens.
  Mary

• Bottom of workflow process Hang problem

  Product: EBS R12.0.4
  Platform: RHEL AS 4.6
  Instance: Production
  
  Description of the problem:
  1. I have schduled import program Auto Bill during the night there are 80000 lines. I have observed this hanged database node. I try to ping the node DB, but you answer is not at the level of the network. But the Application node was ok and you answer on network. Then I shutdwon Application Linux server node and manually restarted the node database of food touches because I wasn't capable connection node of the BONES of the DB. I restarted the database and the Application node. Auto invoice import program was completed in 5 Hours.Whole working fine application day and not observed any problems.
  
  2. the next day, I planned the process Workflow Backgroung night ø100 am. When observed in the morning node new DB hanged then I rebooted the Linux server and the DB and demand. State of the process Workflow Backgroung was Manager inactive. And started the workflow background process this time.
  
  I want to know
  
  1. why the database node is suspended with these processes, but all other processes are not the cause of the problem?
  2. why these processes take too long to complete?
  
  Kind regards
  pzdba

  PL see MOS Doc 752533.1 (R12: Workflow Background process performance: RA_CUSTOMER_TRX_LINES_ALL)-this seems to be a known issue on 12.0.4

  HTH
  Srini

• iMac in suspension after restoring from Time Machine

  Sorry - closed my previous thread by mistake then publish again for assistance:

  Hi - I had a late 2012 27 "IMac El Capitan 10.11.4

  A few days ago a reboot is required after (I think) an upgrade of the El Capitan, but the machine hanging after the reboot, showing a gray screen, a small circle in the middle with a grey diagonal line in the circle. Under the circle turning another circular graph which gives the feeling that I have to wait for the machine to do something.

  In any case, the machine was stuck in this mode then after a lot of messing around, I went for a full restore from Time Machine (which is held on a NAS). Everything seems to be going smoothly, taking 20hours. He said full restoration and did a restart, but I am now stuck on the circle of greg with the diagonal line through it again that does not heal a re-boot. Utility disk V13 (450) shows on the left:

  • Drive internal
    • Macintosh HD. I can select Macintosh HD disc and verify and repair run correctly. It shows 852 MB free space of 1.11 TB of capacity
  • Disk2
    • System basis of Mac OS x, check disk is fine. It shows 38.3 MB available 1.19 GB capacity

  Maybe some sort of thing disk permissions?

  Thank you

  Try to start in Safe Mode, as in > try safe mode if your Mac does not commissioning - Apple Support

• Firefox will open 4 or 5 thin legs, but then do not load any other sites after the first 4 or 5 or you can update one of these first tabs - including: config and the addon page

  Firefox 5 worked well. I installed Firefox 7, and when I ran, tabs just say «connecting to...» "and hang up. Rebooting did not help. Sites Web open correctly in IE and Chrome. Disabled all firewalls and antivirus, nothing helped. Uninstalled and reinstalled Firefox 5, everything has worked again. It was using Vista 64-bit.

  Upgrading to Windows 7, uninstalled Firefox 5, installed Firefox 7, had the same problem. Uninstalled Firefox 7 completely (including profile information, I saved this information in another file), restarted the computer and installed Firefox 7 using a clean profile. Do not install add-ons, checked to make sure that all plug-ins were updated and updated plugins up-to-date.

  Now when I run Firefox, I can load 3 or 4 or 5 tabs very well - after these first tabs bit are open, I can not open or refresh all other tabs - with about: config and the add-on Manager - I have to restart Firefox. The hangup does not appear to be associated with what websites I try to open, but it seems that the number is the problem. I ran through all the procedures of the FAQ, including changing the maximum number of connections to 48, and the problem does not seem to go away.

  As a side note, I had this same problem when I tried to go from version 5 to version 6 more. Version 5 is the latest version which worked on my system.

  The default value of the pref Network.http.Max - connections has been increased from 30 up to 256 in versions of Firefox 6 +.

  Try to decrease the value of the pref Network.http.Max - connections from 255 to a setting like 30 such as used in versions of Firefox 3.

  • https://support.Mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

  See also:

  • http://blog.bonardo.NET/2011/09/30/is-your-firefor-freezing-at-regular-intervals
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

• Satellite L350 restarts on the Vista installation

  Hey, my friend gave me his L350-145 (PSLD0E-00U00YGR) to reinstall Vista, because the system was full of Ad - and malware. He bought it on Ebay so there was no CD/DVD and booklet included and Partition Recovery is already deleted. I'm a veteran Windows so I reinstalled systems 100 times, but this one gives me the shiver.

  I created a 32-bit Vista installation DVD, following a Step - by Step Guide without any problem and formatted the drive using "Partition Wizard". 80 GB primary NTFS 'SYSTEM' and 2 logical NTFS. I reboot the system with the Vista DVD in the drive and "Windows loading files...". "- the screen apears. Installation of Vista starts propper and I select the country and language. Insert-Windows-key-screen appears and I start to type in the key. The screen turns to black and colored stripes and the system hangs or suddenly reboots without any promt somewhere on the way. It does the same thing after a few moments, if I not touch anything after the "Windows loading files...". ' - screen.

  I checked the BIOS settings, everything seems to be in order.
  I took the DVD from the drive and waited for the "no boot device" - screen for a gel or a reset... nothing.
  I started "Partition Wizard" and waited... nothing.
  This only happens after you start the installation of Vista... sooner or later.

  I'm at the end of my know how.

  Any idea?... pleeeaaase.

  welcome them
  Georg

  > The screen turns to black and colored stripes and the system hangs or suddenly it restarts > without any promt somewhere on the way. It does the same thing after a few moments, if I don't touch > anything after the "Windows loading files...". ' - screen.
  For me, this looks like hardware problem. Something like GPU overheating or something like that.
  Of course I can't say it for sure.
  All you can do is make some small tests to see what happens and try to find out what could be the reason for this.
  > This only happens after you start the installation of Vista... sooner or later.
  Windows-old fighter you can test with, for example from another version of Windows. Try to install Windows7.
  If possible try to speak with your friend and get another HARD drive. You can try to swap the HDD and check if the same thing will happen again.

  I installed different versions of Windows on different machines and I've never noticed anything like that. Some hardware, it must be related issue.

• Desktop computer drive HARD problems, won't load after the splash screen only in black

  Hi, I hope someone here can help me. I have HP Pavilion dv2000 laptop I had for nearly 4 years. These last 4-6 months I get questions such as getting the BSOD (usually unmountable_boot_volume) and excessive delay/hanging while working. I was able to fix these with chkdsk and sfc since no virus was detected. But I couldn't make the successful restore points as they always disappear.

  But last night I forced him to close due to the hanging again and rebooted, it upward to get "a disk read error has occurred. Press ctrl + alt + del to restart"only to receive the same message again. Not far enough, he won't do a chkdsk or sfc. So I went to use my bootable usb key with a recovery console to run chkdsk, startup repair and sfc. He managed to get through the bios and was able to connect to my computer, but it would not load the office. It's just a black screen with my cursor. Going even in safe mode it will appoint the task bar, but soon, to get an error "windows Explorer has stopped working".

  I don't know what to do anymore. It would be great if I can just get into my HARD drive one last time. I've saved most of my files knowing he would die on me, except a few files and just need to run once more to save them. Would appreciate any help, please!

  Hello

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-boot-disk-startup-disk-and-why-would-I-need-one

  Method 2:

  If the previous step fails, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Start-Windows-from-a-CD-or-DVD

  You may be able to save files if you are able to use system restore tools. Follow the steps in the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  If you can not view files by using System Restore hard drive is dead

• Windows with DC5100 Desktop problem

  I have a HP DC5100 with Windows 7 installed, before I did the format I am using XP. The problem I have is that the computer does not restart with the restart button of Windows7 or when you install a software that needs to restart. I had no problem with xp, doing so, do not know what is the problem?. I did a bios update to 1.08. Has anyone seen this problem or any suggestions on fixing this. When I hit the button reboot stops the computer ok but hangs up on reboot, looks like the drive is rotating and the fans are running, but don't do anything?

  Thank you

  You are the very welcome.

  Sorry, it has not worked. You could try to reinstall W7 and see if you get a different result the second time around.

  Paul

• BlackBerry 9780 stuck in RESTART smartphones!

  help... I've updated the mail set up the software and now it won't restart... I got an app error... but nothing since... it hangs just to reboot...

  It is a software problem with the update.

  Please try this:

  Remove the battery, reinsert the battery and keep the ESC button for 1 minute. It is used the phone in safe mode. Please try this and see if the phone boots. Please try to connect to Desktop Manager and data backup.

  If not, follow this (it is most likely that your data will be lost)

  Connect your phone to the Fund Manager while it is set to zero. Desktop Manager will not be able to connect and give you the option to update. Click on update and install the recommended or current versions that which is better.

  Have you installed BB Protect, it backs up your critical data so its never lost because of problems like these.

  Please post as to how it goes.

• Satellite M40: Recovery Procedure hangs on reboot after using the recovery CD

  Hi all

  I have a clients Sat M40-197, which was badly marred by malware that I did a full restore using the supplied disc that has the number of product PMR400490EN0. After the reboot, the system hangs just in normal mode and safe mode, I noticed that the last connected line is Mup.sys, but even in this mode the system always starts. I tried to use Ghost in advanced mode do not resize the partition, but not matter what I try, I can't start.

  Before taking what I think, this is my only option to use a standard OEM XP Home disk and the installation using the supplied product key I was wondering if anyone had solutions to this?

  Thanks in advance.

  Hello

  First looks like a mistake to restore CD. I mean it s possible that the CD is damaged or whatever and then some data is maybe damaged.

  If this isn't the case, then I guess that the following reasons:

  -HARD disk no is not correctly formatted-> reformat it completely and create a LARGE partition
  -HARD disk is defective-> check the HARD drive with a special HARD drive tool of the manufacturer (in most cases you can download it from the manufacturer's Web site)
  You can also download "UBCD4WIN" (just google for it) and check your HARD disk with built-in tools
  -Memory could be faulty-> use the "UBCD4WIN" and check the memory with "PI" or "SuperPI".

  She's...
  ;)

  Welcome them

• Windows 7 hangs after reboot (after "Sensor HP Mobile Data Protection" updated)

  My Windows 7 Home Premium hangs (blue screen) to the 'Starting Windows' screen after reboot. And the reason for the rebate to zero (and crash) is updated to Windows "HP Mobile Data Protection Sensor" . I did hidden, but now I need to install drivers for my webcam and every time that I turn on "automatic driver installation" update of windows server, it installs not only the WebCam drivers, but also this «HP Mobile Data Protection Sensor» update Which brings me to the crash at the next restart of Windows. The only way is to return to the system restore point.

  I use a laptop "HP Compaq 6715 b" . I had Vista prior to this (it was preinstalled with HP all the "stuff"), but after upgrade (reinstallation) of windows 7, upgrading from windows found all the drivers (and graphics and sound and even the biometric device drivers), but is now something wrong after every update "HP Mobile Data Protection Sensor" . Why? Or at least I can make him 'banned '?

  P.S. I had and have the 32-bit version of Windows.

  ny6uctblu,
  Have you checked with HP on any problems with this software?  Here is a link for download of HP for the software.  You should also check that your BIOS is up to date.  I found some info on a wire of HP on the Data Protection sensor Mobile works is not propely.  This thread can also give you some other ideas.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• KB980182 problem (hang on reboot)

  Pro

  Description of the problem: there is a new update which requires me to download an important update on Internet Explorer 8 recently. The download is successful, but the only problem is that the next time I turn on my computer, the computer hangs when loading the Windows loading bar and I have to restore to before the update.
  In this case everything that the update is installed, and whenever I update the same thing, its crashes again.
  It hangs at the loading bar Windows Vista after a reboot, if the update is not installed

  The update is Cumulative Security Update for Internet Explorer 8 for Windows Vista (KB980182)
  Operating system: Windows Vista Home Premium Service Pack 2 32-bit operating system

  .. .after KB980182 systems begins to run as usual and after a few minutes that slows down a lot of things that I need to turn off the PC. The VA runs with 99% of system resources usage. After return to the last restore point, the problem goes away.

  KB980182 covers a minimum of 5 five critical security vulnerabilities, which are widely used as I type this response. If KB980182 is not installed, your computer should NOT be connected to the internet or local area network (i.e. other computers)!

  Contact the Support of Kaspersky, post your topic in the appropriate Forum of community Kaspersky, or...

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• During the upgrade of vista 64 bit, 7 64 bit process hangs about 2/3 of the way through the last part and I have to reboot that restores Vista.

  7 Windows vista upgrade problem

  During the upgrade of vista 64 bit, 7 64 bit process hangs about 2/3 of the way through the last part and I have to reboot that restores Vista. No idea what could be the cause of the crash?

  Hello

  I suggest you perform the steps in troubleshooting from the following link and check how it works.

  Upgrade stops responding (hangs) at 62% when you upgrade to Windows 7

  Check out the following link for more information about how to upgrade Windows Vista to Windows 7

  Upgrade Windows Vista to Windows 7