R7000 can't access admin page and IP DHCP address range changed on its own

Similar Questions

• Cannot access Admin page, nor showing in Explorer after update to Firmware #26923836

  Hi, I just upgraded to 6.4.2 to 6.5.0

  Before I reboot:

  Cannot access admin page, became a loading bar with the NetGear logo, to receive a connection error message.

  I could see my SIN in Solution Explorer and browse the files.

  I rebooted and now it is happening:

  I get the connection error when tring to access the admin page. -Failure error as if he had nothing to this address. Same thing when I use the IP address.

  I ping the Ip and get an immediate response.

  I found some indications that I should be able to connect in SSH with putty, but it does not work for me.

  The LCD display indicating the right host name and version. I also got a message for the encryption to the startup key.

  Don't know what I can do at this point...

  We have tried to reinstall OS and nothing has changed.

  We have tried to unplug an ethernet, nothing has changed.

  The question has been reassigned to lvl 3. They came into tech mode.

  They discover that one of my 2 hard drives is a not synchronize properly and some corrupted system files. Simply, I removed the HDD and restarted normally. Everything was fine.

  I put the HARD drive bad and resynchronization.

  hope this helps someone else.

  PS, The Netgear Customer Service is good and fast - recommended!

• My laptop connects is more to the internet, either hard wired or wireless. When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.

  My laptop connects is more to the internet, either hard wired or wireless.  When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.  My other computer has service very well (or I wouldn't send this message) I checked everything, what to do?

  original title: internet connection.

  Hi vonhatten,

  1. Did you the latest changes on the computer?
  2. You receive an error message when you try to connect to the internet?
  3. You have security software installed on the computer?

  Refer to the article below and try the steps mentioned, check if it helps.

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

• My old MSN e-mail account was hacked and blocked. I created a new Windows Live Hotmail account. How can I access the emails and blocked my old account contact information?

  My old MSN e-mail account was hacked and blocked. I created a new hotmail account. How can I access the emails and blocked my old account contact information?  Thanks for any help!

  original title: hacked E-mail

  Hi BigByrd,

  I'm afraid it's almost impossible to access the old MSN your Hotmail account is newly created account.
  See you soon ~

• I can't access drive "D" and remove some content to make more room.

  * Original title: upgrade.

  Hello. I'm trying to reinstall my own copy of windows 7 Ultimate on my laptop for a clean start.

  My problem is that, because I only did this for a while the "D" partition is completely filled. The bar that shows the ability is red instead of green and because there is no place, I can't reinstall the O/P.

  For some reason, I can't access drive "D" and remove some content to make more room. It does not appear on Device Manager, and when I try to access it through my computer it shows "D" drive must be empty.

  I also tried to add and remove programs, but they all seem to be on the C"" drive.

  How do I enter "D" drive to remove enough information for me to finish a reinstall?

  Start the custom installation, it will ask you where store system.  Click Advanced.  Delete all partitions.  The installation process will create the partitions, that he needs and format.  I recommend strongly against any other that what Windows 7 install really wants partitioning.

• How can I copy 2 pages and turn them into a new pdf document? I can highlight pages, export and then combine files into new pdf, but it's very heavy. Acrobat DC, I cannot open 2 files acrobat side by side.

  I have a 600-page adobe document. How can I copy 2 pages and turn them into a new document? I can highlight pages, export and then combine files into new pdf, but it's very heavy. Acrobat DC, I cannot open 2 files acrobat side by side. In the past, I could take two pages and copy and insert into the document opened adjacent... Thank you

  I'm not what you mean... Start by describing what tools or methods that you use to extract these pages.

  What you write in the first sentence is not true, however. In the dialogue window extract Pages, you can choose whether or not to delete the extracted pages of the original file and extract them as individual pages or not. If you UN-select both options, you will get a single file that contains the pages you have checked out, and they will not be deleted from the original file.

• Dear Adobe, I've updated my account, my payment charged 2 times 1 EUR and still I can't access the PS and LR! Pls help me to find a contact in the customer service! Much thanks! Rita Frei

  Dear Adobe, I've updated my account, my payment charged 2 times 1 EUR and still I can't access the PS and LR! Pls help me to find a contact in the customer service! Much thanks! Rita Frei

  Go to Adobe Creative Cloud

  
  

  Hi Rita,.

  For 1 EUR costs please see Adobe Store | Order FAQ and your online payment

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• Cannot access admin page

  Hello

  I have a unit of the RN102 running v6.2.5 firmware. The problem I have is that after a day or so of the unit in place, I'm more able to access the admin page - it just expires. Everything else still works well, I can still access the Web user interface for other applications on the device (for example. BitTorrent Sync, Plex) then the device has completely locked up to drop off the network.

  By turning the NAS and the new solves the problem for another day or two, and then I lose access to the admin again page. In addition, he shut down using the power button on the front of the unit does not work, I have to pull the power cord to get it to turn off.

  Anyone have any suggestions for how to fix this?

  Thank you

  Sounds like Plex used too much memory and the system has met a low-memory condition.

  You might try rebooting the NAS. Then you should find access to the administration web page.

  The 100 series is storage economic and designed to work both in a limited quantity.

  If you do not use an application for example Transmission then I would turn off.

  There is a newer build ARM of Plex 6.x to plex.tv/downloads that I guess you can try if you want.

• Linksys E3000 - connectivity - can't access Admin setup, etc.

  I had some connectivity issues. I have Cox and a cable modem connected to an E3000 wireless router. Both wireless and direct connections are normally working on my Windows XP computer.

  This morning there was no internet connectivityt. I decided to try to access my router admin page. I couldn't get him. I'm positive, I entered the correct DNS number because it works now. I even turned off wireless to make sure she's trying to connect by ethernet b/c admin wireless access is disabled. This is my main question. What possible reason could I login on my admin page. The router is o. It is plugged it. I even restarted and I still couldn't connect to it? I did an ipconfig/release and / renew and which did not.

  Ok. So I connect my computer directly to the cable modem. My internet is now. It is still a little buggy, but. (In other words, as soon as I open my browser, my google.com homepage says the same thing... without connecttivity. Ok. So, I'm trying to update... It says the same thing. Ok. Then I try another link. It works now. I try google again. It works now. I repeat again and again close and reopen my browser and it's like he's not only the first page you are trying to open.)

  But, I digress. It's the router. So I set about how it was - Internet through the router to the computer. Now, magically, it works, and I can access the Web page and admin?

  So, why couldn't access my router page before. Cox is this coming Tuesday? Does this sound like something is wrong on their end or is it the router.

  Router about a basic configuration, but I don't change the IP start and the range of IP addresses to include only 6 possible connections.

  Yes. I tried everything but now the buttong reset for 30 seconds. Instead, I just unplugged. Nevertheless, there is STILL NO REASON I wouldn't be able to connect to my router a minute and the next minute I can? And the only thing that changes is that I disconnected 1 Ethernet and then plugged it back it later. Unless it was a bad connection or a cable, but I checked that already.

  Forgotten. No help here.

• Can't access web page

  I can't access any web page. But wifi works. Mail works too. Sometimes I get a message telling me that my laptop could treat Google as an "intruder".

  What can I do?

  Hello

  In this case, the first suggestion I'd make is to completelt uninstall Norton as follows.

  Before doing so, make sure that you have a way to reinstall Norton and all required activation code.

  On another PC, downloaded and Save the Norton Removal Tool from the link below.

  FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  When you have finished, copy this file to a usb flash drive and transfer it to your portable computer - just stick to the desktop.

  Run the removal tool Norton and when it is finished, restart the laptop.

  Check if your browser (s) have now access to the internet - if necessary, reinstall Norton and restart the computer again.

  Kind regards

  DP - K

• I can't access the page 2 of my hotmail emails

  How can I access page 2 of my emails (the arrows went)

  Hello JohnBunce,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Hotmail and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/

  Best regards

  Matthew_Ha

• Can't access Admin account

  At the time, my computer (Dell Studio XPS) restarted itself. When I tried to reconnect, he told me that he was unable to connect to my admin account and me and not logged in a default, the temporary account. On this account by default, I can't save anything, even if I still have access to all my original files.

  Try this:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• After Anyconnect I can't access to asa and LAN

  Dear all,

  My office use ASA 5505 and I use anyconnect from outside (sometimes overseas), I can connect to my network and business by ASA, internet access, but I can't access ASA and LAN (network of my client). WHY?

  Office 192.168.10.0/24

  192.168.11.0/24 VPN

  How can I solve this problem?

  ASA Version 9.2 (3)
  !
  ciscoasa hostname
  activate the encrypted password of XXXXXXXXXX
  volatile xlate deny tcp any4 any4
  volatile xlate deny tcp any4 any6
  volatile xlate deny tcp any6 any4
  volatile xlate deny tcp any6 any6
  volatile xlate deny udp any4 any4 eq field
  volatile xlate deny udp any4 any6 eq field
  volatile xlate deny udp any6 any4 eq field
  volatile xlate deny udp any6 any6 eq field
  passwd encrypted XXXXXXXXXX
  names of
  192.168.11.1 mask - 192.168.11.10 local pool Pool VPN IP 255.255.255.0
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP address 192.168.10.254 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  address IP AAA. BBB. CCC DDD EEE. FFF. GGG. HHH
  !
  boot system Disk0: / asa923 - k8.bin
  passive FTP mode
  clock timezone 8 HKST
  DNS domain-lookup outside
  DNS server-group DefaultDNS
  Name-Server 8.8.8.8
  Server name 8.8.4.4
  permit same-security-traffic intra-interface
  network of the VPN_Pool object
  subnet 192.168.11.0 255.255.255.240
  network of the NETWORK_OBJ_192.168.10.0_24 object
  192.168.10.0 subnet 255.255.255.0
  inside_access_in of access allowed any ip an extended list
  outside_access_in list extended access permit icmp any one
  DefaultRAGroup_splitTunnelAcl_1 list standard access allowed 192.168.10.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm-731 - 101.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  interface NAT (outside, outside) dynamic source VPN_Pool
  NAT (inside, outside) static source any any static destination VPN_Pool VPN_Pool non-proxy-arp-search to itinerary
  !
  !
  NAT source auto after (indoor, outdoor) dynamic one interface
  inside_access_in access to the interface inside group
  Access-group outside_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 AAA. BBB. CCC DDD. 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  Activate Server http XXXXX
  http 192.168.10.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-192-SHA ESP-AES-256-SHA SHA-ESP-3DES ESP-DES-SHA ESP-AES-128-SHA-TRANS ESP-AES-192-SHA-TRANS ESP-AES-256-SHA-ESP ESP-3DES-SHA-TRANS TRANS-DES-SHA-TRANS
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  Crypto ca trustpoint ASDM_TrustPoint0
  Terminal registration
  name of the object CN = ciscoasa
  Configure CRL
  Crypto ca trustpoint Anyconnect_Self_Signed_Cert
  registration auto
  name of the object CN = ciscoasa
  Configure CRL
  Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
  registration auto
  name of the object CN = 115.160.145.114, CN = ciscoasa
  Configure CRL
  trustpool crypto ca policy
  string encryption ca Anyconnect_Self_Signed_Cert certificates
  certificate 5c7d4156
  308202d 4 308201bc a0030201 0202045c 415630 0d06092a 864886f7 0d 010105 7 d
  0500302c 3111300f 06035504 03130863 6973636f 61736131 17301506 092a 8648
  09021608 63697363 6f617361 31353131 31303131 31363231 301e170d 86f70d01
  5a170d32 35313130 37313131 3632315a 302 c 3111 55040313 08636973 300f0603
  636f6173 61311730 1506092a 864886f7 0d 010902 16086369 73636f61 73613082
  0122300d 06092 has 86 01010105 00038201 0f003082 010a 0282 010100cc 4886f70d
  af43a895 8c2c3f49 ad16c4b9 a855b47b 773f4245 1954c 728 7 c 568245 6ddc02ab
  78 c 45473 eb4073f6 401d1dca 050dc53f cfb93f58 68087f6d 03334fc 1 53f41daa
  454ff4bb 691235ab 34e21d98 4cfecef4 204e9c95 76b1b417 b5cf746c 830788b 4
  60063e89 0ffe5381 42694cf8 d1be20d4 4c95d9c6 93041af2 94783de0 fe93cf67
  4ad8954f 5392790b 4ded225c c3128cba 8d3ee07b f9fd2208 34b1956c be0a774a
  d054a290 14316cc0 1670bdea f04c828b 7f9483fb 409fa707 fbe5a257 33597fed
  ca790881 b1d4d3dc b0e1095e bf04014e 19c5cfeb f74aac57 ee39cd6e 7389cdd1
  8b9421fa ee2b99ae df07fba1 0b506cd8 ea9f64c5 dd9169ad 157fcdb7 f6cfff02
  03010001 300 d 0609 2a 864886 05050003 82010100 c8719770 1305bd9c f70d0101
  2608f039 0dc6b058 0dfe3d88 76793 has 18 8f601dda b 8553, 893 d95e3b25 30ef7354
  772f7d0b 772869d 7 372f8f5c f32992af fa2c8b6e 0f0ae4ce 4e068b8d b7916af2
  affa1953 5bfd01a6 1a3c147d 75d95d8c 1122fa85 3905f27b 2474aff4 11fff24f
  c305b648 b4c9d8d4 9dcf444b 9326cda3 0c4635d0 90ff8dd8 9444726c 82e002ec
  be120937 0414c20a 39df72fb 76cd9c38 cde9afda 019e9230 66e5dba8 ed208eae
  5faabb85 ff04f8f2 c36b724b 62ec52cc f967ee1d 1a6458fc 507a 2377 45 c 20635
  2c14c431 baac678a dcc20329 4db7aa51 02c 36904 75b5f307 f1cc056d 726bc436
  597a 3814 4ccd421d cb77d8f5 46a8ae69 2d617ac8 2160d7af
  quit smoking
  string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
  certificate 5d7d4156
  308201f0 30820308 a0030201 0202045d 415630 0d06092a 864886f7 0d 010105 7 d
  05003046 06035504 03130863 61736131 18301606 03550403 6973636f 3111300f
  130f3131 352e3136 302e3134 352e3131 1506092a 34311730 864886f7 0d 010902
  73636f61 16086369 7361301e 170d 0d 323531 3135 31313130 31323136 35395a 17
  3111300f 06035504 03130863 6973636f 61736131 a 31303731 32313635 395, 3046
  18301606 03550403 130f3131 352e3136 302e3134 352e3131 1506092's 34311730
  864886f7 0d 010902 16086369 73636f61 73613082 0122300d 06092 has 86 4886f70d
  01010105 00038201 0f003082 010 has 0282 010100cc af43a895 8c2c3f49 ad16c4b9
  a855b47b 773f4245 1954c 728 7 c 78 45473 eb4073f6 401d1dca 568245 6ddc02ab
  050dc53f cfb93f58 68087f6d 03334fc 1 53f41daa 454ff4bb 691235ab 34e21d98
  b 830788 4 4cfecef4 204e9c95 76b1b417 b5cf746c 60063e89 0ffe5381 42694cf8
  d1be20d4 4c95d9c6 93041af2 94783de0 fe93cf67 4ad8954f 5392790b 4ded225c
  c3128cba 8d3ee07b f9fd2208 34b1956c be0a774a d054a290 14316cc0 1670bdea
  f04c828b 7f9483fb 409fa707 fbe5a257 33597fed ca790881 b1d4d3dc b0e1095e
  bf04014e 19c5cfeb f74aac57 ee39cd6e 7389cdd1 8b9421fa ee2b99ae df07fba1
  0b506cd8 ea9f64c5 dd9169ad 157fcdb7 f6cfff02 03010001 300 d 0609 2a 864886
  05050003 82010100 00089cd 3 d0f65c5e 91f7ee15 bbd98446 35639ef9 f70d0101
  45b 64956 f146234c 472b52e6 f2647ced a109cb6b 52bf5f5d 92471cb7 a3a30b63
  052ac212 c6027535 16e42908 ea37c39a 4d203be9 8c4ed8cd 40935057 3fe8a537
  a837c75c feff4dcc 1b2fd276 257f0b46 8fcd2a5c cbdcacec cd14ee46 be136ae7
  7cd4ae0d aace54fe 5187ea57 40d2af87 cded3085 27d6f5d8 1c15ef98 f95cc90e
  a 485049 4 805efa8f 63406609 a663db53 06b94e53 07c1c808 61eadcdb 2c952bee
  74a0b3dd ae262d84 40b85ec5 a89179b2 7e41648e 93f0e419 3c482b29 e482d344
  d756d450 8f0d9302 d023ac43 a31469a4 105c8a0c b1418907 693c558c 08f499ef
  364bc8ba 4543297a a17735a0
  quit smoking
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  Crypto ikev2 activate out of service the customer port 443
  Crypto ikev2 access remote trustpoint Anyconnect_Self_Signed_Cert
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10
  authentication crack
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 20
  authentication rsa - sig
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 30
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 40
  authentication crack
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 50
  authentication rsa - sig
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 60
  preshared authentication
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 70
  authentication crack
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 80
  authentication rsa - sig
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 90
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 100
  authentication crack
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 110
  authentication rsa - sig
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 120
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 130
  authentication crack
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 140
  authentication rsa - sig
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 150
  preshared authentication
  the Encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH stricthostkeycheck
  SSH timeout 5
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  No ipv6-vpn-addr-assign aaa
  no local ipv6-vpn-addr-assign

  dhcpd 192.168.10.254 dns 8.8.8.8
  dhcpd rental 43200
  !
  dhcpd address 192.168.10.1 - 192.168.10.100 inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  NTP AAA server. BBB. CCC. Source DDD outside prefer
  SSL-point of approval ASDM_Launcher_Access_TrustPoint_0 outside vpnlb-ip
  SSL-trust outside ASDM_Launcher_Access_TrustPoint_0 point
  WebVPN
  allow outside
  AnyConnect image disk0:/anyconnect-win-4.2.00096-k9.pkg 1
  AnyConnect profiles Anyconnect_client_profile disk0: / Anyconnect_client_profile.xml
  AnyConnect enable
  tunnel-group-list activate
  internal DefaultRAGroup_2 group strategy
  attributes of Group Policy DefaultRAGroup_2
  DNS-server AAA value. BBB. CCC AAA DDD. BBB. CCC DDD.
  Ikev2 VPN-tunnel-Protocol
  Split-tunnel-policy tunnelspecified
  internal GroupPolicy_Anyconnect group strategy
  attributes of Group Policy GroupPolicy_Anyconnect
  WINS server no
  value of server DNS 8.8.8.8 8.8.4.4
  Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
  Split-tunnel-policy tunnelall
  IPv6-split-tunnel-policy excludespecified
  value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl_1
  by default no
  activate dns split-tunnel-all
  IPv6 address pools no
  WebVPN
  AnyConnect value Anyconnect_client_profile type user profiles
  username password XXXXXXX XXXXXXXXXXXXXXX encrypted privilege 15
  username password XXXXXXX XXXXXXXXXXXXXXX encrypted privilege 15
  attributes of username XXXXXXX
  Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
  attributes global-tunnel-group DefaultRAGroup
  address pool VPN-pool
  Group Policy - by default-DefaultRAGroup_2
  IPSec-attributes tunnel-group DefaultRAGroup
  IKEv1 pre-shared key XXXXXXXXX
  tunnel-group DefaultRAGroup ppp-attributes
  ms-chap-v2 authentication
  tunnel-group Anyconnect type remote access
  tunnel-group Anyconnect General attributes
  address pool VPN-pool
  Group Policy - by default-GroupPolicy_Anyconnect
  NAT - to-public-ip assigned inside
  tunnel-group Anyconnect webvpn-attributes
  enable Anyconnect group-alias
  tunnel-group Anyconnect ppp-attributes
  ms-chap-v2 authentication
  !
  Global class-card class
  match default-inspection-traffic
  !
  !
  World-Policy policy-map
  Global category
  inspect the dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  service-policy-international policy global
  context of prompt hostname
  no remote anonymous reporting call
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:24991680b66624113beb31d230c593bb
  : end

  Hi cwhlaw2009,

  You must configure a policy Split-tunnel, if you want to be able to access the internal and local network at the same time.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-next-generation-firewalls/100936-asa8x-split-tunnel-AnyConnect-config.html

  It may be useful

  -Randy-

• 5.4 Lightroom can't access the page import: "internal error - could not find namespace: AgCreativeCloudUtils".

  I just installed Lightroom 5.4 (I use OS 10.10.2), and now I can't access the import page.

  The error message says: internal error - namespace was not found: AgCreativeCloudUtils

  Does anyone know how to fix this?

  Thank you.

  I thought about it. I used 5.4 but installed 5.7.1 so a simple reboot fixed it.

• Without a password how can I access the computer and make my own?

  I inherited a Mac Mini (2012, but do not have the password to the owner (departed).) How can I access and make my own?

  Follow the steps here:

  What to do before you sell or give away your Mac - Apple Support

  To restore to a factory State, set up like yours.