R7000 reset questions

Long story but we are... This morning I wanted to test the latest beta firmware on my R7000. I unplugged all connect my Wired except the one that I would use to communcate with the router. then I have connected and click on the button "reset to factory settings". After a reboot, I was not able to connect to the router to "192.168.1.1" or "'www.routerlogin.com". " I'll double check my IP address (192.168.1.2 fine) even to restart my computer to find the same problem. The computer says it connected but I could not the internet or the router. Then I grabbed my phone and have a WIFI fast scan. I see wireless routers by default (channel 1) and my unique network 2.4 comments listed (Channel 6). Huh? Why my guest network would fall after a reset? If I connect to WIFI via my phone and Netgear engineering applying to go on the router. According to the app my guest network is disabled, so I turn it on and do a scan. Now, I have 4 WIFI networks showing... by default the SSID for 2.4 g, 5 g, 2.4 guest (channel 1) and my 2.4 uniqe comments SSID it shows still (Channel 6). If I connect to this... I can still use the Netgear engineering soft but no internet. OK that's nuts so I have a 30-30-30 of preforms reset... The only one that has changed is now my wired computer can connect to the internet but still cannot connect to the router.

IM out of ideas on what to do next the only ones I can get invole with a hammer.

Yes everything works fine now.

Tags: Netgear

Similar Questions

  • T510 factory reset question

    Windows 7 64 bit on my T510 is dead. When you connect, it hangs on the forever login screen. Windows Recovery failed too. It lasted eight hours and reported an error (something like error to restore a file and the disk is full, although my C drive is half empty). After that, all the Windows restore points have disappeared. So I guess I need to factory reset.

    My question is, I made two other partitions on my hard drive using external tools, that store all my data. So when I do the factory reset, these two partitions are replaced? Any suggestions so I can recover the system while keeping all my data? Thank you.

    The resumption of the plant will remove all partitions on the disk. Faced with a similar problem, here is what I do:
    First of all, I have remove all hard drive passwords. Then, I suggest Vibrio hard drive test in BIOS to see if the drive is the root of the problem. Buy a new hard drive, then install the OS on the new drive. The old disk can be mounted in a USB enclosure or an Ultrabay adapter to access the data. I tend to keep the old drive for 3-6 months in case I've missed or forgotten something, so I sell or reuse the old disk, after the failure of it.

  • C20 TC5.0 FACTORY RESET QUESTION

    Need help please.

    I have a C20 of the TC5.0 running software.

    Using the document quick set c20 for factory reset... I turned off the system.  Just press on and hold power and get the flashing of the LED (GRN).

    Problem is that when I press and hold button LED GRN light never comes to the top.  After about 8 to 10 seconds, I have the RED Led.  When I release the button of the normal commenses system starts.  ?????

    All the ideas that I need to get the password reset on the thing.

    E-mail: [email protected] / * /

    VR

    Chet

    The factory reset procedure was changed in software version TC5.1, so anything before that has a different procedure than newer versions.

    As has been mentioned by Jens - factory reset procedure is different on the version of the software you are using, so, in your case, with the TC5.0 software, you will need to use the "old way".

    There are a description of the methods in the jrandby post in the thread c20-factory - default - power button .

    As mentioned in the Troubleshooting Guide (pages 22-25), the physical method of performing a factory reset is one of the last options resort - there are other methods, first of all, you should try.

    Wayne
    --
    Remember the frequency responses and mark your question as answered as appropriate.

  • Factory reset question

    I have reset to factory my AE this morning and he automatically joins the network. The next time I did it, the amber light remains flashing. I have to connect it via Ethernet for the initial Setup? Thank you for your help.

    Cheers, Peter

    I have reset to factory my AE this morning and he automatically joins the network.

    She could not do this if the reset was a success, given that the network settings on the Express would have been totally erased in a successful reset.

    Next time that I did, the amber light is still flashing

    This indicates that the reset was successful.

    I have to connect it via Ethernet for the initial Setup?

    Use an Ethernet cable during installation only if you plan to have the Express connected permanently to your router using a wired Ethernet connection.

    Use wireless during installation of the Express, if you plan to have the Express connect wireless to your existing wireless network.

    In other words, you set up the Express the way it will be used with your network.

  • reset question and encryption Time capsule

    I have reset my Time Capsule with a hard reset (power off and the reset button on TC).  I've reset with the same password but do not know if my TC drive is always encrypted with the same password as before the hard reset.

    I lost control of my time Capsule when I changed to "DHCP and NAT" bridge mode  My TC works in an existing network with an Ethernet connection to the modem router modem/router for the broadband (Comcast) data and a separate wireless network.  I was watching my TC and noticed a few unidentified wireless clients. Without thinking carefully, I asked myself why I was in Bridge mode and past my TC bridge DHCP/NAT form.  Oops.

    I believe me who put in a double NAT situation and I have lost visibility and control my TC - I couldn't see or effect framework with Airport utility, running on a client computer wireless.  I tried several things but finally reset the TC and the same password of TC and set mode Bridge (the default value).  The backup disks safe when I look into TimeCapsule, I still show want to ensure that they have the same password as before I have not reset or tenant an encryption password.

    Reset a Time Capsule will not change the format of the disc. This requires the use of disk utility with the time Capsule disk tab Airport utility. The drive isn't yet sure unless you also reformatted it. It does not read like you did.

    If the Capsule worked properly in bridge mode, then be sure to return to this mode if you connect to another, not Apple, router or modem/router. If the Capsule is your only connection to a cable or DSL modem device, you can use normal DHCP.

  • PALM TX - Factory Reset question - need help

    I have a PALM TX. The green power button on top seems the PALM TX turns on but not turn off the power. The home on the PALM TX button will literally reset the PALM TX by it turn off and save as a PC. The soft reset by clicking on the reset at the back button works. The hard reset never works it just of upward loads data and time to change initially. I tried a reset which apparently does not apply to the PALM TX zero. I'm doing gift of this device, but I want to make sure that all my information is a first. I think I'll just keep it if I can't find a way to do a factory reset.

    When all else failed, I tried to remove only randomly all the softare or memory on the primary server, but at some point it resets and it won't let me do this etiher. A knowledge of any software I can add to make a factory reset?

    Tara

    Is this your first Palm?  It sounds like from an older older device file system have been sent to this TX.

    A Hard Reset is recommended.  If your power switch is in effect unusable, I have another solution.

    To perform a hard reset: (Palm Knowledgebase article #887)

    By now the power down button, press on and release the Reset button on the back and continue to press the Power button. When the gray Palm logo is displayed, you can release the Power button.

    You should now see the warning in 5 languages page. Press the direction upward on the 5-way keypad to perform the task. The Palm restarts several times as it re - install the original programs and erases all data from your previous.

    If you are unable to do the above, download and install the "Hard Reset" here:

    http://www.palmpowerups.com/downloads.php?cat_id=2

    The program will run immediately reset when it runs.

    WyreNut

  • Re: Satellite T130 - 11H - Factory Reset questions

    Hello

    I had to reset my Satellite T130 - 11 H to factory settings to try to stop the issues with my internet and computer in very slow summer and unresponsive, but now when it starts it states that it is "complete the installation may take several minutes" then restarts on its own starts again, then restart again and again!

    Now it is tell ing, the same message but just hangs and does not go on my counter top?

    Help

    Thank you

    Hello

    I know during a recovery procedure you laptop will restart several times. So, don't interrupt and wait. If it restarts always for a long time, you can restore the settings to factory using recovery media, you did

  • Reset questions

    I bought my new (unlocked) MB511 on Ebay and did not know that it is the 'Orange' on her network United Kingdom. That said, the phone works fine on text messages and call with no attachments. However, if I do not receive a text with an attachment I can't download, at least not on my Go-phone account. AT & T said even if I signed up with data, it may not work because it is not an AT & T phone.

    In any case, I want to try to sell it on Ebay, I did a reset. Are all my installed app, photos, contact and account information MotoBlur wiped out?

    Yes, all the personal data is now gone from the phone.

    The phone did not work properly for you it is that Orange (as with most UK cellular providers) use a different AT & T data frequency (and most other U.S. suppliers). Radio frequencies are integrated into the OS, so there is no way to change this without resorting to the guarantee cancellation of activities.

  • The password for user of APEX ADMIN Reset question

    Hi all

    I'm trying to reset the password for the ADMIN user by using the following script (taken from apxchpwd.sql) from SQL Developer. I've connected to the database as a user with DBA privileges.
    alter session set current_schema = APEX_040000;
    begin
    
        wwv_flow_security.g_security_group_id := 10;
        wwv_flow_security.g_user := 'ADMIN';
        wwv_flow_security.g_import_in_progress := true;
    
        for c1 in (select user_id
                     from wwv_flow_fnd_user
                    where security_group_id = wwv_flow_security.g_security_group_id
                      and user_name = wwv_flow_security.g_user) loop
    
            wwv_flow_fnd_user_api.edit_fnd_user(
                p_user_id       => c1.user_id,
                p_user_name     => wwv_flow_security.g_user,
                p_web_password  => 'newPassword',
                p_new_password  => 'newPassword');
        end loop;
    
        wwv_flow_security.g_import_in_progress := false;
    
    end;
    /
    Commit;
    But I am getting following error.
    session SET altered.
    
    Error starting at line 2 in command:
    begin
    
        wwv_flow_security.g_security_group_id := 10;
        wwv_flow_security.g_user := 'ADMIN';
        wwv_flow_security.g_import_in_progress := true;
    
        for c1 in (select user_id
                     from wwv_flow_fnd_user
                    where security_group_id = wwv_flow_security.g_security_group_id
                      and user_name = wwv_flow_security.g_user) loop
    
            wwv_flow_fnd_user_api.edit_fnd_user(
                p_user_id       => c1.user_id,
                p_user_name     => wwv_flow_security.g_user,
                p_web_password  => 'newPassword',
                p_new_password  => 'newPassword');
        end loop;
    
        wwv_flow_security.g_import_in_progress := false;
    end;
    Error report:
    ORA-20001: Unauthorized access (security group package variable not set).
    ORA-06512: at "APEX_040000.WWV_FLOW_FND_USER_API", line 22
    ORA-06512: at "APEX_040000.WWV_FLOW_FND_USER_API", line 1625
    ORA-06512: at line 12
    
    commited.
    The Version of database: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
    APEX Version: 4.0.2.00.07

    Can someone let me know what is the problem?

    Kind regards
    Hari

    If I send the APEX_040000 script to our s/n, he ran the old writing that is on the server, thinking that the two should be the same, since the file name is the same.

    Thank you!

  • Reset question slides

    Hello

    I have a few question slides in my classes which are not scored.  After the questions have been answered or ignored and the learner clicks on rewind button to re start the course that the question slides are grayed out.

    How can I activate again the questions and keep being active each time someone clicks on rewind to re start the course.

    Help!

    Do you have "Allow backward" in the Quiz settings?

  • WNR3500Lv2 reset question

    Hello.

    I bricked my WNR3500Lv2 when tried to install the firmware "openwrt".

    Now, I can't restore default or router by method "30-30-30" "7 s".

    Everyone can do tips on the issue?

    Hi @HH78

    Welcome to the community!

    See if this article would help.

  • Force10 S60 Factory Reset question

    Hi all

    As the title says, I have a S60 Force10 that I need to restore factory settings, but none to the documentation I found so far has worked.  When I tension, rather than get the menu "Select an option" normal, it messages "submarine 1.3.4" and run the boot sequence instead.  At a time given in the process, it gives me the ability to stop Auto-start sequence, but not the choice if I do.  Call the help file to the moment there does not offer much either...

    I know, it cannot be that hard, so I must be missing something simple.  Someone at - it was otherwise here?  I don't need to keep all the settings, I want to just configure the switch from scratch.

    Thanks in advance,

    -Michael

    After entering the commands

    -Online setenv stconfigignore true

    -Online saveenv

    Allow the system to boot completely, without pressing any key during the boot process. Don't worry not about entering default settings restore. Once it is done booting, what status is the switch then in? It is operational and accepting orders? Or another status?

  • I forgot Security Question and cannot reset it

    I would like to know about reset on the security issue, because I can't click on this menu "use rescue Email Address? I just guess my security questions then this thing happen.

    Return to zero link only shows if you have a verified account backup e-mail address, use the section "If you can't reset your security questions" at the bottom of the page that you have posted to contact technical support in the country where you are (and therefore the country on your account) to get the reset questions : If you forgot your Apple ID - Apple Support security questions answered

    You cannot send an e-mail to reset, if not an alternate email address, or cannot access the e-mail to your e-mail address of rescue, call us for help. When you call, you may need to create a temporary support PIN to verify your identity. After resetting your security questions, you can update your email address for help.

    If your country is not on this page "ask us for help" then try this form to contact Support: https://www.apple.com/emea/support/itunes/contact.html

  • why I do not have a link to reset my security questions

    why I do not have a link to reset my security questions

    If you have not then you don't have a spare checked on your account e-mail address (an additional/alternate e-mail address is different) - you need to contact Support in the country where you are (and therefore the country on your account) for reset questions: Contact Apple for the Apple ID account security support

    If your country is not on this page, then try this form to contact Support: https://www.apple.com/emea/support/itunes/contact.html

    When they have been reset you can then add a backup for possible future use email address: on your Apple ID - Apple Support email addresses

    Or if it is available in your country, you can substitute 2-step verification: frequently asked questions about two-step for Apple ID verification

  • Don't remember security questions

    Cannot reset or change the security questions on my AppleID to use the credit I have on my account because I do not remember the answers I put in 8 years there is something to do with my favorite and least favorite school teacher. They have the Icelandic letters, and I don't even know if I had those in or he writes with normal letters instead. A way to work around this problem and reset questions or submit a ticket to Apple supports because when I choose Apple and AppleID support he said: I'm in Iceland and has no solutions.

    Thanks in advance.

    Sincerely,

    Einar Þ

    Hello

    What you need to do is follow the instructions in this article to support > If you forgot the answers to your security questions Apple - ID Apple supported

    A suggestion would be to write your security questions and answers and store this information and store it somewhere safe.

Maybe you are looking for

  • Wireless switch doesn't seem to work on the Satellite M35X-S114

    I have a Satellite M35X-S114. OS is XP SP2. I use wireless at home for years. Yesterday, my laptop started telling me that it couldn't find my router and my wireless radio switch was not turned on. As it's turned on and orange glowing like always. I

  • Rear chassis fan Z400 always runs at high SPEED

    I have several Z400 workstations. One of them is much noisier than the rest: the rear system (case fan) fan is almost always running at high RPM. On the normal Z400s, the BIOS Setup. File | Speed of about 1 600 rpm of fan reports of temperatures of t

  • Agilent 33250 has synchronized with DT9812

    Hello everyone, I'm trying to control two devices (Agilent 33250 A and card DAQ DT9812) synchronizedly using LabVIEW.I need excite a transducer using an arbitrary waveform generated by 33250 A burst mode with its frequency swept KHz x to Y KHz with a

  • File downloads - how to remove several unwanted files?

    I have stupidly amassed 429 points, some I want to keep, and one load I want to erase. Having this 429, a back up takes more time to do. Please, what is the best way to untangle this mess. Thank you. Nicholas Barnard 31.12.2014

  • Printer HP 5610 stopped printing from Vista

    A printer driver can simply disappear.  I am trying to download one, but I get a message from HP that the computer already has the driver. I don't have the disk. * original title - HP 5610 printer stopped printing. Showed the paper jam first, but he