R8500: QOS is terrible on this router for $400
So before you get this router I was using a $20 off of eBay refurbished Linksys router E6500 running DD WRT (Yes, you can run it on this router if you know where to find the firmware for this). In any case, the flow was not the greatest, but I never had problems.
I have a ReadyNAS RN516 to my office and the backup on my Mac using the time machine office nas. I also have the Charter which gives single 4mbps upload (it's slow, but once he finished the initial and subsequent backup backups are fine). In real life, it's more like 4.75mbps. I have QOS value 3.75 to ensure that my modem is not bufferbloat and kill my connection.
My problem is however that often my devices slow to a crawl (if more than 5 Ghz wireless or wired) whenever I am downloading. On my other router I just put 4 Mbps as the download limit and all devices than 4mbps equally, and I never had no problem with slowdowns or high pings and lag. No matter what I put the download speed at... He accuses just out for no apparent reason on this router.
If someone can tell me why free DD WRT software works better than the software on a router for $400? Just curious?
The new firmware seems to have helped. I changed a few things as well, and it seems to work very well.
Regarding the comment of routers figure 3 and 4 routers in figure, there must be an improvement on the 2 figure routers and routers multi-3, otherwise what's the point?
I'm trying the test of the future a little, that's why I chose this router. It doesn't matter if I take it right back and stick with my $ 20 DDWRT router. I do not have the latest and greatest tech (2012 macbook air and several iPhone 6 more ' and a room above the router and I can not even through any speedtests 60mbps (run through the gigabit mac that is wired and I move 65mbps each time.)
I don't have a fast enough home nas box, but I'd be curious to see wireless local area network speeds. I wonder if I can break even 100 Mbps with this thing...
Tags: Netgear
Similar Questions
-
Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi
Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi
Superior...
After all, the chip is mainly a modem.
Wireless is there but not designed as the primary connection.
Wireless 802.11n 300Mbps AP with 2 x 2 MIMO Wireless bridge, WDS multiple SSID, including isolated invited SSID WiFi QoS (WMM) and PowerSave wireless security: • Wi - Fi Protected Access (WPA, WPA2) • AES, TKIP, WEP encryptio
It is the Wireless N standard.
The TC is dual-band simultaneous AC1750... even if in fact apple never leaves anything use 300mbit on the 2.4 GHz is more like AC1450... It is also 3 streams on both bands not 2 x 2.
The fact that aid.
The only thing to note is that a router from Apple can join never a router wireless not apple... so, there must always be plugged in by ethernet.
-
I have a MN700 router for my wireless. How to reset the password?
I have a MN700 router for my wireless. How to reset the password?
I contacted Microsoft via the phone, but because they no longer carry this point they couldn't help me.Hello
1. what operating system is installed on your computer?
2 did you change your computer, after which the issue started?Here is the manual for the device...
Reset the router and set it up as if it was the first time. Then, you can simply choose a new password and security settings.
-
Need to modernize the modem; How do I 'plan' relocation WRT54G Router for wired / wireless
I went late to upgrade my modem, and from what I've read in the comments, do a modem/router combo doesn't seem to be the best thing to do in what concerns the issues of reliability and range. So, I want to upgrade my modem & then use the same router/access point that I currently have. However, I've read other users with problems by accessing the control panel after you connect to a new modem... so want to know the information that I need to have before starting this project.
Is this to say that I'm going to basically start early and set up my home network all over again?
I'm pretty tech-savy... but I do not enough to really launch the project & see where it takes me... I don't have the TIME! Laughing out loud!
Thanks for any help/advice anyone can offer!
Jane
Really, it depends on the type of settings that your ISP would put on the new modem. If the configuration of the new modem would be the same with the old, so there is no need for you to make any changes on the router. Simply connect the new modem, perform a powercycle by unplugging the power cord from the modem and router and it should work. However, if it is not, what you can do is to reset the router and reconfigure. The following links help you reconfigure the router after a reset.
Setting up a Linksys router with cable Internet service
-
Suggestions for wireless router for a big house?
Hello.
I have a client's family who will be in a large walk-in (but on a hill giant hill as if she had two floors) House. About 88 feet seems to be the longest distance a small room with the new cable modem. This is based on the aerial shooting of Google Maps: http://zimage.com/~ant/temp/88ftLongestDistanceFromACableModemRoom.jpg (on the right/east side is a huge Hill with trees).
An old Linksys WRT54GL router will be able to manage this far distance at high speeds and stability? If this isn't the case, then what wireless routers can do? It would be nice to have options of third-party firmware like the Linksys WRT54GL routers. Rapid speed Gigabit / fast local file also, transfers between the computers in the House! 100 Mbps is slow these days! Stability and support are too important. The routers didn't need to be later also.
Thank you in advance.
The maximum distance of this router is 100feet provided that there is no interference between the router and the computer. If you want to transfer local gigabit speed, so it is not possible with this router because it has port etherne is only 10/100. You may need to consider getting a Wireless N gigabit router (make sure that the wired adapter of the computer also is gigabit). For wireless connectivity make sure that the computer's wireless network adapter is dual-band N adapter.
-
Adding a laptop computer to this router
I'm not at all techminded and need help. We have a BESFR41 router and want to add our laptop (wireless). Can it be added to this router?
Thank you!
Yes, you have two choices for the BEFSR41 has no built-in support for wireless.
(1) If you want to connect your laptop's wireless the BEFSR41 and on the Internet, you must purchase a "access point" wireless network that will carry out the connection of your wired LAN (ports on the BEFSR41) and your wireless laptop. Consider a Linksys WAP54G, relatively cheap and easy to hang your BEFSR41 was. This is what I have at home (a wired router, two WAP54G).
or,
(2) connect to your laptop through a wired connection (ethernet). Get a cable, connect a LAN to the laptop and the BEFSR41 port. Not as convenient and you will be tied by the length of the cable, but it will be faster than a wireless G connection.
Or you could the BEFSR41 of pit and get a router that took both wired and wireless support.
Hope this helps,
Russ
-
I want to talk about WIRED computers, do not speak of wireless.
I have 3 PC:
-2 are connected via Modem directly to the PC.
-1 is connected through router, and the router is connected to the modem.
The problem, this is it, it cannot detect the homegroup that I created on the computer that is directly connected by modem.
The 2 PC via modem are perfectly detected and connected to the homegroup, so I want to know what I would do to another PC (which is connected to the router via modem) detects the homegroup, I had already created?
Help, please.
A Modem can have only two ports, connect to the internet (Wide Area Network) and the second to a SINGLE local device. In most cases the internet Service Pwill provide with only an IP address so itself cannot connect to more than one at a time. In current solutions, it is very rare for a Modem to use. If as you say, you have several devices connected to this unit then he himself is a router but possibly with the Modem built in if you have ADSL ISP.
If your second unit is also a router then that explains why you cannot connect all devices in the same residential group.
Router 1 has created a Local Area Network including both PC and the WAN port on the Router 2. Router 2 has created another independent local network with the 3rd PC. It is very likely that the two local networks will be IPv4 and traffic can be routed between them correctly in both directions according to the two local networks subnet ranges.
Even if they are properly configured to allow traffic that HomeGroup requires IPv6 that some home routers support fully and every Member of the residential group must be on the same LAN anyway, he will not support a routed connection.
Remove the 3rd PC of the 2nd router and plug it into the direct 1 router, remove the router 2nd the 1st in order to free the port. 3 all PCs are now on the same local network and communicate both IPv4 and IPv6, and homegroup should work.
If you need additional ports provided by the 2nd router for other devices is not part of this problem then consider replacing it with a switch. If you use Router 2 for other devices Wi - Fi irrelevant then you need a wireless access Point.
-
Original title: router Question.
Hi all
not sure if this is the right place to post but I was looking for some information about routers. specifically, I want to know what I need to look at when buying a router for 50 concurrent users, 1 server connection information. specifications, etc.
Thanks :)
Some routers will define a limited number of simultaneous connections. Domestic routers rarely do because the assumption is that the environment will not include such a high number.
Ideally in a commercial environment you would separate on the hardware connection since the hardware firewall. It depends on the type of connection (ADSL?).
-
Why no implicit route for traffic from IPSec-L2L tunnel?
In a hub-and-spoke IPSec environment, it is not difficult to implement routing by spoke to the hub.
But on the side of the hub of a tunnel, where the gateway of last resort for traffic by spoke it, it seems almost counterintuitive than the ACL instructions and even cryptographic doesn't implicitly create a route for the traffic of the station in the tunnel at the end (talk). It could always be replaced with a static if necessary.
There is probably a good reason for this, but I can't think of it. Or am I the only person who thinks it is strange... or maybe an opportunity to feature?
Hello
This feature exists and is called reverse road injection. The route is created dynamically (based on ACL Cryptography) and is only available when the SA is up.
http://www.Cisco.com/en/us/docs/iOS/12_3t/12_3t14/feature/guide/gt_rrie.html
HTH
Laurent.
-
ACL logging on router for syslog
ACL logging on router for syslog
I need to monitor ports on the router to a particular host to a destination. I have an ACL as shown below
permit log host 192.168.0.10 ip host 10.0.0.1
allow an ip
I have server syslog configuration, I see on the syslog server log messages, but there is no port information.
Log message looks like
"% S-6-acl IPACCESSLOGP:list permits 10.0.0.1 (0)-> 192.168.0.10 (0), xx packages.
I need to know which ports are host 10.0.0.1 uses the server 192.168.0.10
What is the best way to get this information.
Thank you
Dominic provides a creative solution. And according to the requirements of the original post, it could be a very satisfactory solution.
But we can also provide an explanation of the problem and a solution for this. A very simple access list that allows traffic between a specific pair of guests receive the original message and then allow all ip traffic. The access list does not cover all the values for the Protocol ports. And it is the reason for the log messages do not have port information. If the access list does not review the port numbers the message cannot report port numbers. If you want the log message to include port numbers, then you must consider the port numbers in the access list. This version of the list is slightly more complex, but it will provide the port numbers you want:
permit udp host 10.0.0.1 host 192.168.0.10 between 0 65535 Journal
permit tcp host 10.0.0.1 host 192.168.0.10 between 0 65535 Journal
permit log host 192.168.0.10 ip host 10.0.0.1
allow an ip
HTH
Rick
-
Different routes for interfaces VXLAN?
Hi guys,.
According to the NSX v2.1 Design Guide:
The need for static routing is due to the fact that ESXi support only two TCP/IP stacks:
-VXLAN: This is dedicated to the VMkernel VTEP interface traffic. A dedicated-default route 0.0.0.0/0 can then be configured on the stack for each ESXi pointing the gateway deployed on the local of ToR, and this allows to communicate with the VTEPs deployed in different subnets of Transport distance.
-By default: This battery is used for all other types of traffic (vMotion, management, storage). It is typical to use a default for purposes of management route (given that the connection to the management interface of vmk0 could be from several remote IP subnets). This means that the static routing configuration is necessary to support communication inter-sous for other types of traffic.
Sounds good, but is this special VXLAN stack added by default? Or do I need to create and configure? I configured a host with a separate management and VXLAN VMkernel interfaces. I see my traffic VXLAN hustled through the default gateway on the management network.
I use static IP pools on the direction and the VXLAN interfaces. Does anyone know how to add this route dedicated by default under the battery VXLAN?
Released of one of my hosts of calculation:
vmk0 = management
vmk1 = VXLAN
~ # esxcfg - road - l
VMkernel itineraries:
Interface of network gateway subnet mask
172.16.100.0 255.255.255.128 subnet local vmk0
by default 0.0.0.0 172.16.100.1 vmk0
~ # esxcfg - vmknic - l
Interface Port Group/DVPort IP IP family address Netmask Broadcast MAC address MTU TSO MSS active Type
0 IPv4 172.16.100.100 vmk0 255.255.255.128 172.16.100.127 00: 0C: true 29:ab:31:c9 1500 65535 vmk0 STATIC IPv6 fe80::20c:29ff:feab:31 0c 00 64 9:0 c: true 1500 65535 STATIC 29:ab:31:c9.
FAVORITE
vmk1 2 IPv4 172.16.200.100 255.255.255.128 172.16.200.127 00:50:56:64:0e:f3 1600 65535 true vmk1 STATIC IPv6 fe80::250:56ff:fe64:ef3 64 00:50:56:64:0e:f3 1600 65535 true STATIC 2.
FAVORITE
Kind regards
Bobby
VTEP interface is created by NSX during the preparation of the host.
You can see this step the NSX Getting Started Guide - "step 3: prepare the ESXi NSX hosts" (Getting Started Guide for vSphere NSX).
Once you have your VXLAN battery in ESXi, you can see its stack via vCenter UI (as usual).
Or if you like CLI:
. Directions:
root@Lab1_ESXi1: ~ # esxcli ip network route ipv4 list n vxlan
Interface Source network gateway subnet mask
------------ ------------- ------------ --------- ------
by default 0.0.0.0 192.168.20.1 vmk1 MANUAL
192.168.20.0 255.255.255.0 0.0.0.0 vmk1 MANUAL
. Ping
root@Lab1_ESXi1: ~ # ping ++ netstack = vxlan 192.168.20.22
PING 192.168.20.22 (192.168.20.22): 56 data bytes
64 bytes from 192.168.20.22: icmp_seq = 0 ttl = 64 time = 0,616 ms
Dimitri
-
My Apple Watch shows that I'm up-to-date 2.2.2. Today 3.0 is available. Is this only for new watches?
No - watch OS 3 is available for all models of Apple Watch.
Be patient in waiting for the watch OS update 3 to become available, but start by updating your iPhone on iOS 10:
Update the software on your iPhone, iPad or iPod touch - Apple Support iOS
-
Gmail and all the others crash in "Oops!" Google cannot load this page for some reason any
I am running 10.10.5 and Firefox 41.0.2. Sophos said me no problem.
In case of Gmail or any other program running in Firefox, the program stops to the message of the screen;
"Oops!""Google can not load this page for some reason any."
The box Try Again has no effect.
However the use of "Most visited" (top of the line LH of Firefox screen) returns to place that quit, without loss of data
Clear the cache and delete cookies only from Web sites that cause problems.
"Clear the Cache":
- Firefox > Preferences > advanced > network > content caching Web: 'clear now '.
'Delete Cookies' sites causing problems:
- Firefox > Preferences > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".
If the deletion of cookies did not help, then it is possible that the cookies.sqlite file that stores the cookies has been corrupted.
- Rename (or delete) cookies.sqlite (cookies.sqlite.old) and if present remove cookies.sqlite - shm and cookies.sqlite - wal in the Firefox profile folder in the cookies.sqlite case has been corrupted.
You can use this button to go to the current Firefox profile folder:
- Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
- http://KB.mozillazine.org/Profile_folder_-_Firefox
-
When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?
Disable the iMessage?
-
Firefox opens automatically even when files 'This automatically for files like this' is checked
http://i.imgur.com/xbcCI97.PNG
I ticked the box of "do this automatically" for Word document files (and other types of files) a long time ago, but Firefox still displays this dialog box asking what I want to do with the file.
How can I fix?
Thank you.
Sometimes, the site sends erroneous information about a file.
InlineDisposition 2 {web link}
InlineDisposition 2 amends the provision of Content-Disposition
the response of the Inline attachment headers.
Maybe you are looking for
-
Hello I have a retina display 13 inch. I was just curious to know if the keyboard cover could melt or produce hazardous fumes when the mac has heated up. This is because sometimes the mac feels very hot to the touch and the cover of the keyboard stil
-
How will I know if my laptop has a bluetooth circuit
I recently bought a HP Pavilion Notebook g7. I thought it was the circuit bluetooth inside, but I can't access anything of this nature. How will I know whether or not she has this circuit? netzherm
-
Vista installed windows ultimate promotion dvd kit. Site to register is no longer available. How can I get a product key? Provided site is www.registerwindowsvistasp1.com
-
I want to disable all firewall windows & advocate!
I had blocked the Defender & firewall and it worked effectively. When I try to connect to messenger/email I get the message cannot send or receive e-mail. When I try to sign in it stop me even if I used the procedures of 'help '. I can't do anything!
-
I can't listen to spellings online.
Original title:listen to the audio by clicking one the small sound control own embedded in the Web page instead of download I take an online course and I can listen to spelling: usually I click on the small triangle and the sound starts, since a few