Radeon HD 6490 m and the completely gone my computer Pavilion DV6 Catalyst Control Center

Similar Questions

• Speed max and the capacity of RAM of Pavilion dv6

  Hi guys,.

  I don't know, you have been asked before, but each post I find little answers my question, but not exclusively:

  What is the maximum speed and the RAM capacity can put in my Pavilion dv6 (Beats edition)? Completely factory standard

  I want the fastest and most large amount of RAM I can get (I'll make heavy photo editing) and then I put a SSD in as well?

  HP Pavilion dv6 Notebook PC

  Windows 7 Home Premium 64-bit Service Pack 1

  Intel Core i3 - 2330 M CPU @ 2.20 GHz

  RAM:

  Slot 1: 2 GB SODIMM Hynix 1333 MHz

  Slolt 2: 4 GB SODIMM Samsung 1333 MHz

  Radeon (TM) HD 6490 M

  Motherboard: 17F9 10.5 A

  BIOS: F.1B

  Sincere greetings

  Justin

  You are the very welcome, Justin.

  Yes, that's correct. 2 x 8 GB PC3-10600 memory.

  Memory will not run any more quickly than the FSB of the processor. Your CPU FSB is 1333 MHz.

  For example: If you have installed 2 x 8 GB PC3-12600 (1666 MHz) memory, he would go only to 1333 MHz.

  I don't think that there is no outside but except DDR5 memory in video cards.

  But you can not mix DDR memory types, because they work with different voltages and the notches are cut at different places on DDR, DDR2, and DDR3 memory modules to prevent someone to install the bad memory in the PC and damage memory, motherboard or both because of the different voltages they run on.

  Best regards

  Paul

• What is the difference between Windows 7 starter edition and the complete software of Windows 7?

  I am considering buying my daughter a netbook, but the operating system is Windows 7 starter 32 bit SP1. What is the difference between that and the complete software of Windows 7?

  Have a look here...

  http://www.softwaretipsandtricks.com/windowsxp/articles/978/1/difference-between-Windows-7-Starter%2c-Windows-7-Home-Basic-and-Windows-7-Home-Premium

  There are fewer features because the machines that installed Starter tend to be low power devices...

• Microsoft Silverlight will / can send information about the people and the info on their computer. What are the plans for Firefox to protect its community of users of this?

  After reading the privacy statement from Microsoft regarding their Silverlight 5, it has troubling information about the loss of his privacy, under the "collection and use of information...". "the personal information and the information on my computer! In addition, information may be stored outside of the United States! (paragraph 4 under "collection and use of information... »). As part of the FireFox community, what other options do we have?

  P. S.
  I clicked on "Shared Data" on my Firefox browser, that means all average data? All good or bad I should know about?

  Hello 010matrix010, firefox will not run on the default Web sites, but only silverlight content when a user activates explicitly the plug-in through the icon in the address bar or click on the embedded content.
  also the support for plugins like silverlight in the browser will be dismantled at the end of next year: https://blog.mozilla.org/futurereleases/2015/10/08/npapi-plugins-in-firefox/

• I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center

  Original title:

  Virtualization server 2012

  I got too many answers to this question. I need the correct answer before buying any CALs galore.

  I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center. I have 25 computers that need to communicate with the server throughout the day, all the different machines. I want to know the best option without breaking the Bank. I permit the data center included in the package to my server.

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• How can I disable the Mappoint 2006 for the installation and the reactivation on new computer

  How can I disable the MapPoint 2006 for the installation and the reactivation on new computer

  This forum is for posting comments on the web site of Microsoft Answers, only not to ask questions of Mappoint.

  Mappoint forum is here: http://social.microsoft.com/Forums/en-US/streetsandtrips/threads

• The Start button and the taskbar on my computer has changed and I don't know how to get back to its original look, I have windows vista

  The Start button and the taskbar on my computer has changed and I don't know what to do to get back to its original state. I have windows Vista

  Hello

  Have you changed the desktop theme?

  Change windows to Classic view

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-to-Classic-view

  Refer: Change Desktop Theme

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme

  Why are some Visual elements will automatically turn off?
  http://Windows.Microsoft.com/en-us/Windows-Vista/why-are-some-Visual-elements-being-automatically-turned-off

  Thank you

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How to place my following the last version adobe software if I have the serial number and the CD, but my computer (Macbook Pro) lacks a CD player?

  How to place my following the last version adobe software if I have the serial number and the CD, but my computer (Macbook Pro) lacks a CD player?

  You can download the installation files and use the serial number of the drive.

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

• Tried to update the graphics drivers, everything broken (pavilion dv6 6135)

  My laptop is HP Pavilion dv6 6135

  (windows 7 Home premium 64-bit)

  I tried to update the graphics drivers 8.882.2.3000

  I found the drivers on the hp site, it said that it contains the drivers for the two

  GPU (switchable graphics) and control catalyst center, but when I downloaded and installed

  and rebooted catalyst control center was gone, says dxdiag also "ati card (0xsomething).

  After the update instead of Radeon HD6770M

  I even tried to install versions more old driver and removing the drivers before installing

  Journal: link

  (noticed the Setup log indicates it has detected the gpu as 0 x 6740 (even he says in dxdiag after the update of the driver))

  so there may be something about driver installation program does not detect not not my 6770 M?)

  ALSO when I go to the custom installation, nothing but "intel driver hd graphics" though even the file desc indicates that it contains new drivers for the two GPUs.

  link to the driver package thing: link=

  How can I fix? I really don't want to use the hp recovery thing.

  Hello

  good to see that you are in the right forum!

  Left click anywhere on your desktop and go back! You should see the CCC.

  If it was a rattler...

• Satellite A100-237: I don't have the Catalyst Control Center after the installation of the driver

  Hello

  I use a laptop Satellite A100-237. 1.83 GHz Core Duo, Ati Mobility Radeon X 1600 512 MB Hypermemory, 1.5 GB of RAM DDR2.
  My laptop seems to now use only the own 256 MB RAM (own RAM graphics card).
  I bought Need for Speed Carbon and installed on my laptop.

  When I tried to open the game, a blue screen appeared for less than 1 second and the system rebooted. Windows said it was a critical mistake and a stopped driver Windows XP for work, so the system is restarted.
  I searched on the net for this problem, and the people said that when they pilot updated the problem is resolved.

  I downloaded the 8.241 display driver (download file name: display_xp - 8241.zip) Toshiba - Europe.com.
  Driver installed, but when installing ATI Catalyst Control Center, at one time installation process continuing collapsed. I had to end the task after a while.
  He said that the driver is installed and system must be rebooted.

  Now the game works, which is not the problem, but I do not have the Catalyst Control Center. (Where I recently use to connect other screens to my laptop)
  How can I solve this problem?

  Sorry for the long letter,
  Thanks for the help.

  Hello

  As suggested above, you can try to restart the installation but I guess that you will not be able to install the graphics driver of ATI origin on the manufacturing site.
  You can try to use the omega site ot driver drivers Toshiba orginal...

  @aportakal
  Anyway, the ATI MOBILITY RADEON X 1600 is not a memory sheared graphics card and this is why this card does not use the part of the main memory. It supports a 256 MB own memory.

• Where can I download the latest graphic driver HP Pavilion dv6 6051?

  Hello! Where can I download the latest graphic driver HP Pavilion dv6 6051? Graphics card is the Radeon HD6770M and integrated into Core i5 graphics. Support AMD told me for him ask the laptop manufacturer.

  Hello:

  It is the latest version of the driver that HP has for your laptop.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102011-1&CC=US&DLC=en&LC=en&os=4063&Product=5081020&sw_lang=

  He most recent are not available.

  Paul

• WARNING: The Catalyst Control Center is not supported by the version of the graphics adapter driver you activated. If you please update your ATI graphics driver or enable your ATI card using the display manager.

  Original title:  Install the new NVIDIA GeForce GT 240 graphics card but now gets error message regarding the necessary to the old card drivers ATI Radeon.

  I just bought a new computer from AMD PHenom II quad core Dell Inspiron with Windows 7 installed. For the graphics card, an ATI RAdeon 4200 on it there but I wanted a more powerful card and installed a NVIDIA GeForce GT 240 graphics card. The ATI Radeon is not delete because honestly, I could not recognize what it should look like and thought that maybe it was incorporated. The fine installed NVIDIA card and now shows as the graphics card used by the computer Information System.

  My problem is that whenever I start my computer, I get an error message saying that the drivers for the ATI card are not compatible with the Catalyst Control Center. I think I need to disable the ATI card, but don't know how. Can you help me?

  Dell Inspiron 570 is a desktop computer, the ATI Radeon 4200 is an integrated graphics card chipset usually equipped with laptops. Something is not here.

  Go to dell support, enter your tag # and get the origonal system specifications.

  You can uninstall anything about ATI through Add/Remove dialog

• Catalyst Control Center will not be open, with the error

  Hello

  I have a HP Pavilion dv4-3030TX laptop with Windows 7 x 64 and I'm trying to access my video card settings in the Catalyst Control Center. Whenever I try to start the program I get the error message: could not load file or assembly ' CLI. Implementation ' or one of its dependencies. The system cannot find the specified file. »

  I have erased all traces of the completely with Driver Sweeper, in Mode safe driver and then reinstalled with the SoftPaq, but I still get the same error later. A note: when I finished the installation of the graphics driver, the Installer gives me a warning that there is at least an error during the installation of the driver and gives me a button "View log", but this button doesn't appear to do anything. I searched for the newspaper myself but I have not found one.  I hope someone can help.

  Try to uninstall the fomr Catalyst Control Center and driver within programs and have section of the control panel. Once you have done this, restart your computer and try to reinstall it

  

• I need a download link or a name of a version of any compatible with amd radeon hd M 7670 amd catalyst control center

  I had a few mistakes with the latest amd control center so I suppose to download a newer version, I can't find anything on amd as amd mobility auto detect tool does not work for toshiba and the other amd catalyst control center are not compatible with my card. I tried toshiba Middle East and uk after I have entered the details of my laptop and had the link to download but kept interrupting, been a week amd display driver or tho attempts to solve the problem of catalyst... I have a toshiba satellite L855-B511. Vendor reference number: PSKFWV-00C004AR. I got it from the Middle East, that well I find hwen I type my serial number, but stillt he download getting interrupted and my friend of france tried its getting interrupted too! I need MICROSOFT HELP, im a gamer and I need CCC

  Hello

  It is both the latest drivers available from Toshiba specifically for your machine...

  I think the Win 8 2012, and pilots Win 8.1 are 2013...

  I'm sure there are newer drivers, but which are not compatible with your machine...

  Type M chips and drivers are different from those of a desktop machine where it is not really important who built the computer because the driver and catalyst for the chip...

  Laptops are different, because manufacturers sometimes customize drivers to their specific models.

  That's why you have problems. You posted a list previously of three manufacturers which are not compatible with the AMD drivers, one of them being Toshiba...

  That's because Toshiba has changed the drivers or the material in such a way that the normal drivers do not work...

  You can try to update the drivers for the newer versions through windows or Windows Updates... you might get lucky and they will work OK or maybe even better...

  There have been problems with graphs of type AMD M since Win 8 came out, so I can't say with certainty what will happen.

  Drivers AMD come as a complete package now... CCC and all drivers. They tend to be available separately, but may not be. I saw a couple of times where you can just get CCC, but it's very rare...

  Sometimes you will get just the driver of Windows updates even if...