RAID 1 support on Dell PowerEdge R730 with SSD and Perc H730 discs

Similar Questions

• Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode.

  Hi Sir,

  Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode after upgrading the RAM to 64 GB.

  Arrangement of RAM is made 4 our 16 GB of RAM on 2 channels. I get no error message about the RAM configuration. It is booting in safe mode but not start in normal mode, his hanging during windows startup.

  Please give me guide to solve this problem.

  I thank & regards

  Ramanantsoa D

  Thanks for the reply.

  My version of windows is 32-bit Windows server 2003 Enterprise Edition Service Pack 2.

  Although I have not tried switching/EAP, I will try that and get back to you.

  And again something I have an idea of the installation of windows server 2008 R2 Standard version on this server, it will support? Please let me know Chris.

  Thank you.

• Dell PowerEdge R730 Rack Server

  Dear support team, I need urgent help here...

  I have to have to Open Dell Management CD to install windows and I installed windows server 2012R2 without using the disk operating system that lead that now lack of drivers.

  So my question now is how to update the missing drivers from the CD, avoiding reinstall OS again because I already have the full installer for my applications...

  Waiting for your answer...
  Kind regards

  Solved by going to dell driver > chose my product and download and installed (Drivers-for-OS-Deployment_Application)

• OK, I NEED someone TO HELP me INSTALL LESS ESXi 5.0 on my Dell PowerEdge 1950 Server! And of course, HE IS No. TUTORIAL on this SITE FOR ME HELP!

  As I said earlier:

  OK, I am trying to install vSpere on my Dell PowerEdge 1950.

  Hardware specifications:

  4 GB FB-DIMM DDR2 memory

  x 2 processor Intel Xeon, 2 carrots, 3.00 GHz

  There a RAID BIOS, so I had to create a Raid 0 virtual disk to install anything.

  Drive hard WD 1 TB, it's the one I use for the VD.

  When I choose which hard drive I use, I select the VD, I created, I select my keyboard language, then the configuration scan my material, then he asks me if if want to install, I pressed F11. Then, when it reached 5%, it throws an error: "partedUtil failed with the message: error: can not have a partition outside the disk!

  He says that it cannot install it on a virtual drive? My server is not compatible?

  Edit: There is another error that says: cannot read the partition table for device:

  /VMFS/devices/disks/NAA.60019b90bd8289001e62575a584731e0

  What is going on!!! Why vmware cannot have tutorials on "How to install Esxi on a server with RAID BIOS"?

  Check if the virtual HARD disk you packed is initialized. It seems that the installation is not written on this HARD drive. Back to the HARD Disk Manager (you probably PERC5 / I) to start the process I think is CTRL + R? find your virtual drive and launch. Take a look at the image as an attachment.

• Vista Service pack 2 install problem on Dell XPS M1330 with SSD hard drive

  Hello

  I have a DELL XPS M1330 with Solid State SDD drive. None of the solutions have solved my installation problem including run all the tools to clean up the intall. It restarts after installation, then crosses the restart process, then the States 'installation failed' and then back again.
  Vista Ultimate 32 bit, 24 GHz chip. Nothing else cannot simply install service pack 2.

  Thanks in advance for your help

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  =============================

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• (Redirected) Cannot boot from the HARD drive on dell n5010 with SSD and HARD drive installed

  I have my old dell n5010 (15R Inspiron) with SSD (Samsung EVO 840 120 G) installed on the main drive Bay and the HDD (Samsung HJJ 500 G) on the optical drive Bay.

  It is a typical way to add an SSD on such an old laptop (bought from dell.com.cn in 2011).

  My Windows 10 operating system has been installed on the SSD using Samsung Data Migration software, so the previous C drive was pointless. So I formatted and installed an operating system Ubuntu 14.04 on it, hoping the grub OSs double beginning located on the HARD disk.

  However, I find no the Dell bios boot option to boot from the HARD drive installed in my optical drive Bay. All the choices are 'Hard Drive', 'Network' and 'Diagnostic '.

  But I was definitely sure that my bios program has detected the SSD and HDD with information on the main menu of the bios.

  And the LED on the optical drive Bay was immediately once I pressed the Start button on my laptop.

  As a general rule, all things were right except for options of the bios boot.

  Is there a way I can boot from HDD (with installed Ubuntu) while remaining has my SSD on the main drive Bay? I don't want to swap their positions, because the SSD is super fast on the main drive Bay.

  I have alse won't migrate 10 Windows to the HARD drive and reinstall Ubuntu on the SSD, because I'd like my windows be loaded quickly.

  Someone at - it the same problem with me?

  Any suggestion is appreciated!

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• PowerEdge R710 and perc h700, disc not visible in OS

  Hey,.

  We have PowerEdge R710 with perc h700 raid 5 controller physical drives under raid6 running. We have recently added a sixth of the road which is much smaller (512 against 4 TBS) we want to just format and use it as a normal drive in the OS (Ubuntu 12.04.5).

  However, the drive is not visible in the operating system. When you enter the settings of the RAID controller that it says that the drive is READY but not configured and all the options to the title of operations are grayed out. How can we make this hard drive is visible in the operating system?

  See you soon

  The H700 does NOT support non RAID, so all records first must be configured on the controller, before its presentation to the BONE. You must configure (initialize) as a single drive RAID 0.

• 8 GB RAM with ssd and ram 12 GB without ssd cache cache

  We are looking to buy a laptop HP Envy 17 t j100 touchsmart for our son.  Which would be better:

  8 GB of RAM with SSD exceleration 24gig or 12 GB of ram without ssd cache memory?

  The cache of WSSD 24gig offers performance very similar to a full SSD drive for a much lower cost. I would buy the unit with the drive cache of the WSSD 24 concert and as little memory as they sell me and then increase the RAM me but 8 GB of RAM it's frankly more than many. In fact, it's probably better than 12 because there 2 identical modules allowing the functioning of memory dual channel. To summarize, the best option is clearly 8 GB RAm and the WSSD of 24 concert disk cache.

• HP probook 4540 s: dual boot 4540 with SSD and HDD

  Hello world

  Recently, I replaced my HDD with a SSD on my HP probook 4540 s

  Using a HARD drive enclosure, I installed the SSD on the slot of the hard drive and the HARD drive on the DVD drive SATA connector

  the two hard drives have win 7 professional 64 bit

  When I turn on the laptop, the OS on the SSD starts and I see the HARD drive as a storage drive

  Thus, from a material point of view, everything works fine

  now, I would like to use two hard drives with the ability to use win 7 times of SSD and HDD

  to boot from the HARD drive, I tried to change the boot order put the DVDrom before the hard drive, but it did not work

  any suggestion\software tool which may help?

  Thank you very much

  Giuseppe

  @Giuseppe1:

  To do this, you must choose a single installation as the default and change the BCD in this one to include starting in the installation of other.

  Installing Win7 on the internal HARD disk is the best choice because he will always be there.

  That change, download and install EasyBCD from Neosmart Technologies.  It is a tool on the menu to change the BCD.  It is safe to download and use, as I use it all the time.

  Once installed, follow these steps:

  (1) run EasyBCD

  2) click on the button Add a new entrance on the left

  (3) in the section on the right operating system, click the Windows tab, and then select the drive that contains the OTHER Windows startup

  4) click the button Add an entry

  Now when you reboot your machine, you should see a menu with two entries - one for each version of the windows OS.

  Good luck

  ========================================================================
  If you feel that my suggestions helped you, please click on the Thumbs-Up symbol; If they helped to solve your problem, please click "accept as a Solution.

  I'm a volunteer and I do not work for, or represent, HP.

• Initialization of the options in the system dell poweredge r610 with perc 6 / i raid controller

  Hello Sir,

  I have a new question on dell power edge, actually I wanted to know this server works on a raid configuration only and for the purpose of the security of the data, we are able to use a flash drive to object is initialized (os ex: esxi, linux, windows) server as well as data will be SAS and OS record store will be separated into a flash drive?

  Please clear my doubt... Thank you

  Thanks for the reply.

  Yes we do, the real problem is I want to start my server with flash drive, I don't want to use the hard drive for OS, HARD drive for storage and the flash drive for OS.

• DELL PowerEdge R730 (Gen 13) always 100% fan (16000 RPM +)

  Hello

  I have a brand new R730 DELL.  Since the time I first started the box, the beginning of fans out to what I consider normal speed, halfway through start, then for as long as the box is enabled, the fans are strong and spinning to their maximum rate 100% or about 16000 RPM.  There are 6 fans in this area.

  I have updated the BIOS to the latest firmware 2.2.25, I also updated the firmware from LifeCycleController to the last 2.40.40.40.

  Dell technician has been there twice to replace 1) all motherboard (motherboard) and the other 2) maps PCI riser (who had the button intrusion).

  The server fans still spin 100%.

  I did:

  -the flea power drain

  -the IPMI command to turn off cooling for PCIe

  -remove all memory but 1 chip in A1 and deleted 8 SSDS.

  Turning always to 100%.

  When you look at the installation of the fan to the iDRAC, I can't even set a custom value because the beach is stuck at 100-100%.

  There is no additional PCI or PCIe cards installed.

  Does anyone have an idea what is happening here.  It does not seem right that this fan run at 100% all the time.

  Looking at the configuration of the system, the server was shipped with 2 processors Intel Xeon E5-2689 V4. These processors have additional thermal requirements and so RPM fans' will operate 100% as a trade off. Based on this information, the fans run according to the needs.

• Dell PowerEdge R730 + ESXi 6 U2: licensing problem bought

  Hello

  I am trying to assign vSphere Standard licenses, I bought via Dell (and saved).

  Whenever I try to license, I get an error message:

  "The entered license key has no sufficient capacity for this entity.

  Has anyone ever had this problem?

  I have dual CPU servers (so I bought 4 licenses) that they are by CPU.

  VmWare does not seem to understand my problem.

  Kind regards

  Hello

  What model CPU do you have? https://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1019695

• Dell PowerEdge T110 with internal RD1000

  Anyone know why the server backup doesn't let you choose the RD1000 as a location for the backup on. It is not yet listed. I see it in the list of files in the drive 'e '. but will not appear in the backup software.

  Hello ttcmartin,

  What is the operating system that you are running?  If it is windows 2008, 2008R2, or 2012, you will need to use a 3rd party software backup to get the player seen.  Since windows 2008 if you want to use a tape as your backup target device you must either get Microsoft DPM or a 3rd party backup software.

  Please let us know if you have any other questions.

• Suggested Drive setup for new h8 - 1360t with SSD and Raid-1 array

  All,

  I need some advice on how to configure the drives in my new system (waiting for construction and delivery, sigh).

  I bought a plan to replace the 1 TB drive with a new drive SSD that I start from and H8 - 1360T (Win 7 Pro).

  I also have a Raid-1 array in an old HP 4999 T system (Vista) disks Western Digital Caviar Black 2x2TB

  By looking at the motherboard plug appear to be only SATA0/1 6 GB/s, the others are 3GBPS.

  http://support.HP.com/us-en/document/c03132942

  I was a little surprised by that and need some advice.

  1. If I put the SSD on SATA0 or SATA1, the quickest way?

  2 or do I put the drives Raid-1 array and move the SSD to path of 3 Gbps?

  I think this last (option 2), but wanted to get your entry in case missed me something.

  Thank you

  Joel

  Ruette,

  Thanks for your comments. Looks like I should start with Option 1 as a better starting point.

  Joel

• I have a laptop Dell Inspiron 1501 with Vista and I would like to change it to XP. Is this possible.

  I was wondering if I could replace Vista by XP on my Dell Inspiron 1501 laptop. It is already installed a few years ago and I hate it. Any help would be wonderful. Thank you all.

  Hello

  There is not much to buy windows 7 for this laptop Dell Inspiron 1501.

  Dell has NO Windows 7 drivers available for him.

  There are XP drivers available from Dell for your model laptop

  Use this link to follow through for more information of your laptop:

  http://www.Dell.com/support/drivers/us/en/19

  See you soon.