RAID monitoring

Similar Questions

• With Toshiba Tecra S3 RAID hard drive temperature monitoring

  I wonder if there is a software (or a tweak for Toshiba RAID Utility/drivers) that would allow the monitoring of the temperature of the HARD drive.

  Utility known as SpeedFan, HDTune etc., I tried, and that work very well at least with IDE drives, either don't notice not the hard drive SATA RAID at all on my Tecra S3, or they can not access the S.M.A.R.T on the temperature information (possibly information can not pass through Toshiba RAID drivers...)

  Thnx for any comments.

  Hello

  I usedEveresthome edition.
  But I am an owner of the laptop with a disk IDE HDD and to tell the truth I don't know if it will support the feature m RAID.

  But you can test it.
  This utility reports the HARD drive and the temperature of the CPU and provides many useful and detailed information on the characteristics of portable equipment.

  I hope it's going to market

• Disappears from the main window of the activity monitor

  I'm under El Capitan 10.11.5, 15F34 build on an iMac (retina, 5K, 27 inch, mid-2015). If I open the activity monitor, I get the CPU usage, but the main window will briefly appear and disappear. If I minimize and restore, I also get it for a fraction of a second and then it seems to fall back on the dock. The history of CPU option (cmd 3) is grayed out, although I can get it as the icon in the dock.

  My question, then, is what caused this problem and how to restore to normal activity monitor?

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• Z210: Bad support/problem with recovery of an Z210 system when changing the RAID configuration backup

  My Z210 accompanies stripped Bay RAID-0, which currently consists of 2 x 1 TB HDD where the OS partition. I want to change that in RAID-1 mirror, but as the application of TSRI does no such RAID level migration, I thought I would try another approach.

  As a solution, I'd do a backup using the Windows backup and restore application. Then, I would change the table using the Boot ROM TSRI before restoring the backup to this new array. But obviously backup 1.9 TB in a table of 932GB will not

  So, to make a backup, I firstly disabled 'System Protection' and the file 'Page '. This allowed me to reduce the OS partition to about 50 GB using disk management. Then I re - activate 'System Protection' and the 'Page file' before making the backup and the creation of a system recovery disk. This resulted in a backup of 35 GB that I stocked up on a USB external drive. And now a backup of 35 GB can fit on my reconfigured 932GB RAID - 1 mirror

  As such, I cold booted my system and during the boot process, I pressed CTRL-I to get the State of mind RAID Intel Boot ROM. you, CTRL-I've worked only if I started cold and the HP USB keyboard directly connected the first USB slot at the back of the system. The first USB slot is at the top left when you look at the back with the portrait of the tower. Connect the HP USB keyboard in USB port or in the hub of my Dell monitor does not allow me to access the ROM to Boot Intel RAID!

  HP should really study this fault

  In any case, when I could access the Intel RAID Boot ROM, I deleted the RAID-0 stripped existing and created a new RAID-1 mirror. Obviously, the process is destructive and wipe the BONES of the table but that's what my backup was to

  Then I started on the Windows system recovery disk, plugged the USB external drive and proceeded to recover my system.

  Everything worked as expected with the operating system partition uses about 50 GB. A simple trip to disk management enabled me to extend the volume to occupy the space allocated, as presented by the RAID-1 array. As such, I find myself with about 932 GB partition that appear in the windows disk management tool. After a check disk and reboot (which fixed some minor issues) all seemed well.

  But no, everything was fine

  Well that ROM boot RAID Intel sees that a mirror RAID-1 about 932 GB and the operating system sees a partition about 932 GB, both as expected, demand for Intel RST in windows States the following:

  

  I don't seem to have indication of what type of table, it is, an options to change the name of the table or an option to check the integrity of the array through the TSRI application in windows. If something is screwed

  But after the update for the application of iRST version 10.6.0.1002 Intel (the newest HP of) version 11.2.0.1006 (version Intel got very practice), the question seems to correct itself. Now the RAID, Windows boot ROM and the request of TSRI in Windows all agree that the table is indeed a mirror RAID-1 932 GB.

  

  I don't know what caused the problem, if it's related to something that was wrong with the process that I used, if she is simply resolved by reinstalling driver, or if this is a fix for a known issue that Intel has included in their questions later from the pilot.

  But what I know is that Intel has resolved a number of issues in the version 12.9.0.1001 driver (which is the latest version for the Cougar Point chipsets) compared to the old driver version 10.6.0.1002 HP has on its support page for the Z210.

  And HP seems unwavering in his lack of interest in the Intels 12.9.0.1001 test pilot and then make it available on its support page for what is a product still under warranty

  It is a mediocre service if you ask me...

  Some HP forum administrator or HP support person hide these forums should impose it in the HP management station and get it looked at. The Z210 is still under warranty for some customers and HP needs to pick up the latest drivers available to all suppliers, test them and then release them to their customers via the support page for this product. All the rest is little change us all.

  I was able to resolve the application problem Intel RST by updating to the latest v11.2.0.1006 Intel driver but it has highlighted a few points that HP should address, see linked post above.

  PS: Add this post so I can mark the thread as solved.

• Monitor only works in safe mode now.

  Hello!

  I got my self in a bit of a mess, trying to change my screen after I broke my tv, I had to dig my old vision pro 700 p. Now I have to change the settings for that monitor and now it says on the monitor "Display Mode not compatale! Now every time you start it toward the top of the screen just black remains with this post about that. Can't see windows, unless you put it in safe mode! I tried restoring the sysem on twice, I uninstalled the graphics driver software, and then reinstall just tried than raid drivers and it says that you can only intall these if you have an account administrator in vista, what I'm doing. against because safe mode? I have a compaq presario sr5129uk with a raid hd 6450. Thanks for any help.

  I suggest to remove the video card temporarily. Connect one screen to video output to uninstall MSI overdrive.

  While you're there, you should try to connect two displays to the output video DVI - I and VGA) with cables and converters without the card installed.

• Connect two HD monitors and two readers of L_g33?

  I have two external drives from G-Technology (G-RAID and G-Drive). I have two HD monitors, each of which has a HDMI port. I want to connect each one to my new Macbook Pro 15 (MJLT2LLA), which has two thunderbolt ports and a HDMI port. I want to get the most out of sight to ensure a rapid transfer of data to external drives, where I store my images (G-Drive) and store my video editing and make files (G-RAID). Of course, I want the best use out of the HD monitors.   How can I better connect this mess and get my best video and graphics editing facility?

  These docking stations have many additional ports: http://eshop.macsales.com/item/OWC/TB2DOCK12P/.  Not portable, but functional.

  TB monitors can be connected in Garland... just don't expect readers after the string of monitor to be accessible.

• SCSI/RAID Host Controller, reports "tv_ConfigMgrErr39".

  I ran the reliability and performance monitor on my laptop and the SCSI/RAID Host Controller has been highlighted that does not properly.

  The information contained in the diagnostic reliability monitor results and performance are:

  * Symptom: * _Device drivers marked as corrupt. _
  * Cause: * a device has a configuration issue preventing it from working correctly.
  * Details: * the device, the SCSI/RAID host controller, reports
  'tv_ConfigMgrErr39 '. This device won't be available before the question
  is resolved. The Plug and Play ID for this device is
  ACPI\PNPA000\4-4D18F2DF-1.

  When I check the SCIS/RAID Host Controller Properties, it says under device status:
  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  To search for solutions, nothing is found. There is also no driver software to be updated.

  Would it be the result of some kind of change due to an update or
  something, I ran the monitor first getting the computer (a little
  For more than a year) and has not been advised of any errors. I posted this information in the Microsoft forum and was advised that submit a post here can find me an answer and also to check the appropriate driver downloads. My computer is telling me to contact the manufacturer of your device to download the software, but in its properties, there is no listed manufacturer. I can't get the Toshiba site for a download of driver that I have no idea what this component is and have no idea where to start!

  I would be grateful for any advice (relatively uncomplicated!) and a gentle nudge in the right direction of a appropriate driver.

  Thank you very much
  Sarah

  Hello

  To be honest I don t know what you re talking. It would help if you could post some information like your laptop model.

  39 error code usually means that there is a driver problem so I updated the driver. You can find the latest version on the Toshiba site.

  Sorry mate, but that s all I can say at the moment.

• HP w2207 fails each update HP (monitor works perfectly)

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  Purchased in 2008, the computer and the monitor purchased separately... Monitor has never had a successful update, works perfectly except Corel Win DVD 2010 will not play any DVD. message reads as follows: your display environment doesn't support protected content I thought that if I could update the drivers of HP my DVD would work. Maybe it's 2 problems, would be very grateful if someone could point me in the right direction... Thank you HP-Pavilion, GG056AAR - ABA a6157c System serial number: [text removed for privacy] Case type: Desktop Monitor: HP w2207 Windows Vista Home Premium Service Pack 2 (build 6002) Install language: English (United States) Local system: English (United States)
  Processor		Circuit main b
  2.00 gigahertz Intel Core 2 Duo cache of 64 kilobytes main memory secondary memory 2048 k-cached 64-bit ready Multi-core (2 total) Not hyper-thread		Map: ASUSTek Computer Inc. Leonite2 6.00 Serial number: MS1C76S00402276 The bus clock: 200 MHz BIOS: Phoenix Technologies, LTD 5.17 20/04/2007
  Readers		C and d memory modules
  320.07 capacity disk hard usable GB 226.52 gigabytes of free disk space HL-DT-ST DVDRRW GSA - H30L [scanner] Generic - Compact Flash USB Device [hard drive]--drive 1 Generic-MS/MS-Pro USB Device [hard drive] - disc 4 Generic-SD/MMC USB Device [hard drive] - 3 drive Generic - SM/xD-Picture USB Device [hard drive] - Player 2 SAMSUNG HD320KJ [hard drive] (320,07 GB) - disk 0, SMART location: healthy		Usable 3574 megabytes installed memory Slot 'A0' has 1024 MB Slot 'A1' has 1024 MB Slot 'A2' has 1024 MB Slot 'A3' has 1024 MB
  Controllers of		Display
  Channel [Controller] Intel (r) 82801G (ICH7 Family) Ultra ATA Storage Controllers - 27DF		Intel (r) 82945G Express Chipset Family [graphics card]
  HBAs		Multimedia
  Intel (r) 82801 GR/GH SATA RAID Controller Microsoft iSCSI initiator Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27 8 Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27 9 Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27CA Intel (r) 82801G (ICH7 Family) USB Universal Host Controller - 27CB Intel (r) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC		Hauppauge WinTV HVR-1600 NTSC/ATSC Combo Realtek High Definition Audio

  The protected content message could be caused by a number of elements.  Your monitor must be connected with a DVI cable that is HDCP. Your video card must support HDCP, and finally the video card driver must support HDCP.  The PC may need to be required to manage the video stream protected content.

  I see that the motherboardof your PC has only VGA, so if that's how your monitor is connected, then this is probably the issue.  Install a discreet video with a DVI card and then use a DVI cable would probably solve the HDCP issue.

  Install a discrete video card could also mean that you need to supply. Unplug your computer and open it. Read the label on the power supply unit (PSU).  What is the total power and amperage on the bus + 12 volt?  The amount of amperage + 12 volts is important when choosing a video card.

• Hardware monitoring TD340

  I have a TD340 server running Windows Server R2 2012. It's the first ThinkServer I put in place. I want to know what Lenovo is equivalent to manage Open from Dell or HP Management Homepage. I depend on application of Dell OpenManage so that I can monitor hardware health remotely. However, I can't find which utility will allow me to monitor all of the material in my thinserver. I have download the RAID utility so that I can at least see the health of disks. However, I have a yellow explamation lit on the front of my server and I can not even determine what it is because I don't have the applications or utilities to tell me. Any help would be greatly appreciated.

  You can monitor the hardware using the Management Module integrated Thinkserver.

  Here is the user guide:

  https://download.Lenovo.com/ibmdl/pub/PC/pccbbs/ThinkServers/td340tmmug_en.PDF

  M.

• Use the Apple Cinema Display Monitor on iMac 5K?

  I think the upgrade from my old 'tour' Mac Pro to an iMac of 5K.  It still basically works, but seems inexplicably slow and the two is soft RAID and the system as a whole is more in more not supported.

  Anyway, he has a gorgeous, fully working 30 '' Apple Cinema Display (apparently A1083 model number), which I believe connects via DVI.  I wish you to continue to use this monitor with a new iMac, in addition to the 5 K monitor integrated, of course.

  Does anyone know a Thunderbolt/DVI adapter?  I searched a bit, but so far have not found anything...

  Having found nothing on Apple's site, I thought, what the devil and checked Amazon.  I found that something called "J & D Mini DisplayPort (Thunderbolt) to DVI adapter cable converter.

  Does this mean that the Thunderbolt is identical to what PCs call mini-Display port?

• Using Open manage replace Raid 5 HD

  Everyone,

  I must say first that I'm not a person of software.  However, no one in my company has no experience in the Raid arrays, despite having inherited several systems.  I apologize if my questions and follow-ups are unclear.  I turn a little in the darkest of time.

  I have a Server System 2003 with a Raid 5 array.  One of my hard drives die on me.  I had two identical disks removed from another computer with its own table.

  Using Open manage, I stumbled my way through to get the foreign configuration off this drive and have even allowed.  Now, it's ready state, with the rest of the degraded Raid.  I went to the Virtual Drive section.  For this record, I expect something like rebuild or reconfigure the table or something like that.  Here are the options I see:

  Delete

  Re-branded/decommission dedicated rescue

  Blink

  Unblink

  Change of name

  Change policy

  Replace the drive Member

  My question is, how to make the table to add this record and they start using it?  I want to get the table and running and the degraded state.  I thought it was hot, so should I just pull out and push again?

  Sorry to be a fool this inexperienced.  Any help would be appreciated.  Unfortunately, I was a little thrown to the Wolves of my group on this one.

  Thank you

  Hello.

  It was OK for you to clear the foreign configuration in order to get rid of existing metadata on the drive. Under the selection of available tasks. Assign as dedicated hot spare disk. This will allow the drive to rebuild the table. You can monitor the progress of the reconstruction in the OpenManage Server Administrator (OMSA).

• What type of Raid and disk offline

  Hello world

  Thanks for reading this.

  I have a Dell Poweredge T6300 with a Perc H730.

  It has 8 drives 1 TB 7.2 k.

  It has a C drive and a D drive.

  Looking at the Server Manager / file C and D Storage Services seem to be Raids but I'm not sure what kind.  One of the disks in the set of 4 seems to be flashing orange offline.

  Server seems to work very well.

  Seems that I can't find a way to check the type of Raid without stopping and running Perc H730 map (CTRL + R) software.

  Is this true?
  I think I can hot swap according to the Type of Raid, and I believe that the hardware supports that.

  I was wondering if I think in the right direction.

  Thanks in advance.

  Hi DLOJ333,

  Did you mean you have a T630 instead of T6300 model?

  You can install Open Manage Server Administrator, who will monitor your condition storage and server real-time hardware. Just make sure that you check to install Storage Administrator. This may require a reboot of the server for the registry and the service is running.

  Additionally, make sure that you are running Windows Server.

  Here is the link, it's an ISO: http://dell.to/1ObcpO5

• Updated full M610/620 PERC H310 Mini RAID 1 disk

  I have 8 servers in my M1000e chassis.  They have all two drives 146 GB in Raid-1.  Just got in a boat load of 600GO drives gently used off PE R630 servers who are re-designed in a laboratory.

  I would like to replace all the records with the largest, with minimal downtime and no data loss.

  Advice? Tips? Advice?  Everything would be extremely appreciated before I mess up and make + 400 users very angry with me...

  Hello.

  It is possible to perform this operation with minimal downtime. Ensure that you have a backup validates your data just to be safe. You can do this by deleting every old hard drive and replacing with 600 GB disk, one at a time. Let the new drive to rebuild completely before replacing the other. You can monitor the progress of the reconstruction in OpenManage Server Administrator (OMSA) if installed. Clear the foreign configuration if it appears on the disc, if the drive rebuilt and state LOAN ; assign as a Global hot spare.

  You will notice that the total capacity of the virtual disk (VD) will not 600GO, because there will be unused space on the disks. You will use the property capacity expansion (OCE) online from your controller to claim unused space. In OMSA, GB storage-> PERC H310-> virtual disk-> available-> Reconfigure tasks-> capacity and continue. Under RAID level, select RAID 1 and enter 100 to recover any space unused on the disks and continue. See schematic illustration below:

  

  

  Let me know if you need additional assistance.

• Change a failing drive - RAID Dell Poweredge H310 - RAID 1

  Hi guys,.

  Thank you for everything that support you in these forums. I'm new here.

  We have a Dell PowerEdge T320 server on my new place of work. It is Dell Poweredge H310 RAID controller on it. It is configured in RAID-1, with 2 discs.

  Now my question is: in the event that one of the drives breaks down:

  1 - I should insert the new drive into the slot where the failed disk has been inserted, or in the following location?

  2 - will be the new drive automatically "copied" with the healthy disk data or it will need some work?

  I read the manual and chapter 'Replacement year Online physical disk', says the following, but I don't know the answer to these questions:

  1. in the management of virtual disks window, select Virtual Disk # and press the arrow key down until the physical disks is highlighted.

  2. press arrow right key to expand the list of physical disks that are members of the virtual disk.

  3. press the down arrow and select the desired physical disk that you want to replace. Press to view the list of operations permitted on the disc.

  4. Select Replace and then start.

  5. tap on the down arrow to select a replacement disk and then press the SPACEBAR to select the disk.

  6. click OK to start the replacement.

  Any advice would be appreciated.

  Kind regards.

  Videoclocknet,

  You must remove the failed disk and replace it with another similar drive on the same niche. When you choose the following location, be sure to follow the steps in the virtual disk management screen (VD) as you have indicated.

  The failed drive will be replaced and the replacement drive will be one on the following location. Either way is perfectly fine. You can then monitor status of the VD and the reconstruction process using OpenManage Server Administrator (OMSA).

  2 disks configured in RAID 1 act as a reflection of the other. Failure of 1 drive ensures that the same data are available on the other. When you replace the failed disk, the rebuilding process begins, and the same data gets automatically copied.

  Please let me know if you have any other questions.

• new mac pro 6 core 64 GB of RAM: reading late 4K files timeline and source monitor

  Here is my speed.  not that I understand all the details of this test, but it seems relatively quickly.

  I experience lag during playback of 4 K, the monitor source or online images of scene.  in other words, when I hit play it takes half a second to one second to read.  Once he plays, he has no problem.

  deselection of video keyframes, remove all unused audio tracks (3 cam project) does not help.  Once a clip plays back (and it reads without problems as I said), when you can come back at the beginning of the clip (up arrow), he rereads - i.e. begins once again - no lag.  in the scenario, let's say you chop a 20 minute interview (ok, in detail: each element seems to be 05:51 long and about 5 GB, h264 - must be an automatic feature on the camera in terms of storage - in other words, no large files of 20 GB or whatever it is)-so when you this chop into smaller pieces, when you then go further down the same hashed clip It is delayed once again.  even if it is the same file on the computer.  then return to the where it did not delay initially, this part now shifts again.

  When I put the 1080 p prores files in the project, fast lighting everything.  (I'm talking to navigate and manipulate items in the editing or even source monitor Panel.  I'm not talking rendering and output.  "I think it works very well.)  I'm at the limit of whats possible with my machine and the sequences of 4K with PP?  This is the format?  intuition and several years of experience tell me whatever it is 422 still works perfectly but nothing h264 will always be even the fastest machine to work so hard.  right?  evil?

  PP CC was last updated

  El capitan (guilty?)

  today work with 5400 1 speed 4 thunderbolt to drive rocketstor toaster.  not insanely fast, but as I said, once I got the game on a clip I already hit play previously, it works without lag.  So how is it possible?  What is this feature that makes this place?  There seems to be things loading in the bg who then are responsible - and when you place this specific element to the following, even if both refer to the same file, you have this lag again.  between the second half and second complete.  I exported a file of 5K h264 in a different project and the computer, finder, quicktime etc has no questions immediately play it back.  What gives?

  any ideas?  I thought that a machine of $5K don't experience any lag really.  No I don't want to throw money to solve the problem, but you know what I mean.

  Thank you!

  Michael

  PS: I just checked one of my files to QuickTime.  Yes, here also a half second delay on the play button.  not powerful enough system for reading 4K flawless?  are my criteria for impeccable speed on computer too high?

  

  

  Post edited by: michael freund

  Throw 4 k on a timeline dramatically ups the flow required for EVERYTHING on the computer. Understand, that for 'typical' UHD (1920 x 1080) as I work with, my pc is a 4-core i7 (8 "virtual"... Yes, whatever) 3.5 Ghz (2 cores overclocked as which proved faster in operation), 32 GB of RAM (RAM frequency has been changed too), GTX970 / 4 GB vRAM for graphics.

  I have a decent drive in this machine... Setup but put most of the things PrPro on a WIDE, material faster striped RAID-0 would work as well or better.

  -: Twin 250GB SSD in RAID 0 for speed system, used for the OS & programs ONLY;

  -250GB SSD for the system cache and cache/database files also PrPro;

  -Disk internal 500 GB at 10 000 rpm, previews; (kept fairly clean, less than a third full)

  -Disk internal 3 TB, project files;

  -Internal drive 2 TB, media files; (maintained below 50%)

  -Internal drive 2 TB, exports.

  This extends to the work of in/out/cache disk so it is not slow things down, and so the CPU can be better used. I do stuff test & family here, keep the media on a PNY 128 GB flash, read-only drive so the USB3 who is fast enough.

  Other things, such as documents & upload files, storage general file, is on other players. This keeps all the foregoing, including the system drive, pretty skinny and good working condition.

  The newest Samsung T1/T3 external SSD drives have been tested for incredibly fast work flow, much more than other readers USB3.

  And of course, the internal drives m.2 must amazing flow.

  It is a system of 'balanced', having enough of every bit of available material nothing stacks up this CPU.

  Then... you can watch your disk configuration. You may need a higher throughput...

  Neil