RALink RT3290 stops responding after waking up from hibernation, loss of connection

Similar Questions

• Satellite P750 - resonding stops after waking up from hibernation

  If anyone can help, I recenty purchased a P750 Satellite equipped with an i7 processor it has 4 GB of RAM. I was experencing problems since buying it. It seems to just stop responding the round icon turns showing his thought but I can wait 10-15 minutes and there is no change. This problem occurs sporaticly and sometimes occurs when loading new programs. The problem happens almost all the time if he entered hybernation and when I wake with the mouse, it starts but when I have to connect to the net, for example, he will bring to the top of the page of internet explore and the round icon will be spinning and it will stay like that for centuries until what I am forced to close it with the start and stop button. When I have this problem I have tried using CTRL ALT DELETE to open the Task Manager but the Manager tasks will not respond.

  If anyone has had the same problem and is there a solution. Note When I turn the disk protection mode HARD the probem seems to happen less frequently but persists.

  Hi captain101,

  Wait a minute, please. Icon of what you mean exactly? I don't know what you're talking about, so a more detailed description of this icon would be useful.

  The more you use the version preinstalled Windows from Toshiba or your own installation?

• Satellite Pro M70-275: screen doesn't work after waking up from hibernation.

  Hello

  I sometimes encounter this problem: when starting the hibernation (not sure of the English term, although that. "light sleep" mode in WinXP...) the screen turns on again. The operating system seems to be up and running again, but I really don't know because I do not...
  Sometimes it works fine, but I would like that it works all the time.

  Any ideas?

  / Johannes Ogren
  Gothenburg, Sweden

  Hello

  Will there be the same situation after waking from sleep mode?

  James is right. Usually, this kind of questions is fixed with the new version of the BIOS, but you can also try installing the latest version of Power saver utility.

  If anything maybe you must reinstall the OS using supplied recovery DVDs.

• G560 - network disconnected after waking up from hibernation

  During the last two days, my laptop Lenovo G560 (running Windows 7, 64-bit, BIOS 2.10) has had problems with its (wired) network card after waking from hibernation. It is shown as disconnected (even as if the cable was physically detached). The only big change I played in the last few days has been installed Service Pack 1. However, the problem only appeared about two days after, so I don't know if this is related at all.

  In this case, IPCONFIG shows the following for the NETWORK card:

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  If I try IPCONFIG/renew, I get

  Windows IP configuration

  No operations can be performed on the connection to the Local network, although it has its media disconnected.

  Hovering over the said tray icon "not connected". Troubleshooting of course can't find anything. Also, there is no weird in event viewer entries (unless they are hidden somewhere in other modes). Basically, the behavior is identical to when the network cable is physically disconnected (disconnected).

  In addition, disconnect the network cable, wait a few minutes and in him plugging back again once does nothing.

  For now, I have two workaround solutions:

  -system reboot

  -right click on the connection to the Local network (in network connections), select DISABLE from the menu, wait a few moments and then choosing the option ENABLE on the shortcut menu.

  Is there a better solution to this? Speculation on what might be the reason for this problem all of a sudden?

  Right click on my computer > manage > device management > network cards > select wireless adapter > properties > under power management tab, clear the check box to be able to save "allow the computer to turn off this device to save power".

  Restart your computer and check if it works.

  Please post back with the results.

• Satellite P200-144: Resolution changes after waking up from hibernation

  On my P200 Satelltie I put the graphic resolution of 1440 x 900,
  but on wakinging it from hibernation, it reduces the resolution.

  Also about removing an external display, it does the same thing.
  Annoying because I have to reset the resolution and rearrange icons desk top of the page every time.

  Any body know how to pass this auto reset cut, so that it remains with the setting of the resolution?

  I have too many P200, but everything works fine. You have operating system using recovery DVDs.
  By the way: what operating system do you use?

• no access to internet after waking up from hibernation?

  I have a laptop HP G42 - 23OUS windows 7 Home premium PC. I bought ebay last manufacturer, was refurbished. Also, I use wireless internet. I totally love it, but on the one hand - whenever the computer wakes up from hibernation mode it does not connect to the internet! I have to restart the computer before it will reconnect to the internet, which the ruins completely the whole mode of hibernation in a first time!
  To avoid this problem, I changed so that while that plugged power settings it will never go into hibernation mode & rather will just idle until I have press the key again. That said, it is no longer a huge problem, but I'd still like to know why this happened & what, if anything I could do to fix?
  Thanks for any info you can give me about this someone ' one/everyone!

  Hello:

  Here is the link to the latest driver for your Broadcom wireless card. (as of 02/13/12).

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102505-1&cc=us&DLC=en&LC=en

  If all goes well, the problem will be solved.

  Paul

• Satellite Pro L20: Showing empty after waking up from hibernation

  I've had my laptop Satellite Pro L20 a year now and it has been slowing recently, especially when starting after being in hibernation mode.

  It is even now not return back. I had placed it in hibernation, and then when I tried to turn it on again, it hummed as if it was put into service, but the screen remains blank.

  I don't think that he is in communication with the rest of the laptop. I tried to restart it several times but I still can't out of his inactive hibernation mode and the monitor simply unresponsive.

  Any help would be appreciated kindly!

  Hello

  > I've had my laptop Satellite Pro L20 a year now and it has been slowing recently,.
  Maybe you should clean the HARD drive and also use defragmentation application to optimize the data saved on the HARD drive.

  Back to your problem: I don't know if this will help, but you can try to do the BIOS update or install the latest driver from Toshiba support page display.

• Computer is unlocked after waking up from hibernation

  My computer is unlocked when he wakes up after hibernation, it's that everything works well, but these last days, it is weird. I tried to restart my computer in Eve extended and checked again and same thing.

  Well, I only came here for a workaround, really.

  Found the fix here:
  The option is grayed out, had to reset it.
  Fixed now.

• T410 - washed out colors or lines after waking up from suspend

  I have a strange problem with the display on my new Thinkpad T410. I don't know yet how to describe. Red, green and blue still exist, like black and white, but the brightness between the two levels are washed out or banded. I tried to take pictures of some color models to demonstrate.

  Most of the time, the screen works as I expect. Sometimes however (especially after waking up from his sleep?) the gray borders around things seem too bright and washed out colors. When this happens, he persists and worsens slowly over time.

  If I change the brightness of the screen from top to bottom with Fn + start/end, the effect will change randomly to each pressure, sometimes changing to something even worse, showing a lot of color, strips or almost monochrome, but then to the lesser model, but will always go wrong.

  Not affected by:

  • Change brightness
  • closing cover
  • move to the rear and projection screen
  • locking computer
  • Changing resolution
  • change refresh rate
  • change to 16-bit color
  • tapping or screen rotation

  Didn't happen since I installed the new BIOS.

• After waking up from my mac, the wheel sync runs continuously, but not synchronize files.

  After waking up from my mac, the wheel sync runs continuously, but not synchronize files. ???

  Hello

  Please make sure that your internet connection is good.

  Try to connect on app CC and connect again https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  You can also view following a discussion of this question Re: Creative Cloud app sync. problem with the web application

• Most of the apps on my mac stop responding after that I do something meaningful

  My Macbook was working perfectly yesterday, but earlier today, most of my programs started to not respond, after doing something about them. For example, when I open Safari, everything is good, but when I look for something and you click on a Web page, uh oh, it no longer responds. Same thing with the terminal. Sometimes when I'm trying to type something in, it stops responding.

  I contacted Apple support and they said it was a problem with my hard drive, but I made many controls and all right. How can I fix? I'm getting more RAM soon if it would help me in any way to stop the crashes of programs?

  I use El Capitan 10.11.

  MacBook Pro (13 inch, early 2011)

  Processor: Intel Core i5 to 2.3 GHz

  Memory: 4 GB 1333 MHz DDR3

  Graphics card: Intel HD Graphics 3000 384

  I also re-installed OS X and the problem is still there, so I doubt it will be anything related to the software that I have not yet downloaded anything.

  PS I can't go into an Apple store. In addition, the problem is not terribly annoying, so if I leave it, which is bad, or is it crucial that I get it repaired?

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Windows Vista (32 bit) stops responding after installing the program...

  Hello.

  Recently, my Dell XPS M1530 (Windows Vista 32-bit) has been extinguished during the execution of the system updates (we had a power outage during the night and I didn't) and would only start in safe mode. I moved all my documents on a portable HARD drive and reinstalled the operating system to try to save the computer.

  After I did that and reinstalled the drivers (downloaded from the Dell site via my system identification label), I started to load my programs on it (Adobe, Microsoft Office, etc.). After I install a program and exit the installation window, Vista stops responding. I can't click on the Start button (the mouse will go over it, but it does not allow me to select) or one of the other button I have in my toolbar. I can't click anything in the Dock of Dell at the top of my screen, either.

  The only way to turn off the computer must press and hold the Power button until the laptop turns off. I HATE doing this, but there is no other way to turn it off once a program has been installed.

  Any thoughts on what is happening here? I hope this is just some kind of error on my part - I can't afford to get a new machine. I wanted to upgrade to Windows 7 (my machine can handle), but I don't want the same problem occurs.

  Thanks for your help in advance!

  Hello

  As you re-installed Windows and the problem persists the rules well enough software. The power
  failure should be accompanied by a power surge or other that has caused a problem in the computer.

  Makes it sound like there are hardware problems that can probably be repaired. Have you looked at the system
  by a real computer store (not the leeks and the glances at a Best Buy or other stores) or Support of Dell.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Display driver stopped responding recovered & Display driver Radeon family stopped responding and has recovered from sucsessfully. What does that mean?

  What is the problem when my screen flashes off the coast and back on then bed display driver stopped responding and has recovered & family ATI Radeon driver display unresponsive and doesn't have sucsessfully?

  East elementary school, this means that your graphics driver has recovered from a problem

  This problem occurred after you installed or updated something?

  It happens when you use a particular application?

  What brand/model PC do you have?

• Satellite L450D-128 stops responding after about 2 minutes in Normal Mode

  Hello

  I just got a new Satellite L450D-128 running Windows 7.
  Whenever I run Windows in normal mode, all and stops responding for about 2 minutes after that the office and I have to manually turn off the laptop.

  When I run Windows in safe mode, it seems to work ok, but I prefer not having to use safe mode indefinitely.

  Anyone know how I might be able to solve this problem?

  Thanks in advance.

  Hello

  First try to retrieve the device.
  It's not difficult, and the whole process won't take long.

  Turn the unit on and press F8
  Then choose fix my computer-> Toshiba HDD recovery

  This will start the installation of the new.

  I think that this is necessary in order to check if this problem is not related to software compatibility issues

  If the question will always be present while we should follow the investigation
  I mean, in this case, that a hardware problem would be possible

• Equium A110: Cannot use LAN after wake up from hibernation or standby

  Hi guys

  I can't use lan on my tosiba equium A110 after he wakes up from hibernation or standby. Lan icon there is bur that the internet will not work. Please help me.

  Another problem. When I try to cut something I can't paste it if I open a new folder. I need to keep the file open back cut once again and then paste it. I mean that if after the cut, I open any folder it won't paste it.

  Please help me.

  Thank you

  Hello

  Have you tried to update the connection? Something similar happens on my laptop, but not with LAN but with WLan. If you right click on the little icon of lan, you will see the option to repair. Check it out.

  Also found this possibility. I put t know if it will help but try it.
  1. go to [start]-> [Control Panel]-> select [System]
  2. the system properties dialogue box select [Hardware] tab-> click [Device Manager]
  3. in the Device Manager dialog box, select [network adapters]-> double-click [Intel (r) PRO/100 VE Network Connection]
  4. go in the [Advanced] tab-> property [Wake on settings] select-> Select [Wake on Magic & realized]
  5. Press [OK] to close the dialog box.