RAM Error Code: BIOME-1

My wife HP Pavilion Elite m9150f desktop PC had problems, so I ran the Diagnostics.  He said that memory does not have, so I re-sat 4 chips and re-directed diagnostics.  This time I got "error Code: BIOME-1", but could not find a definition anywhere on HP - does anyone know what this means?

Thank you

Frank

4 memory modules were a couple - slot 1 contained a 1 GB module, slot 2 contained a module of 512 MB. slot 3 contained a module of 1 GB and slot 4 contained a module of 512 MB.  I removed the module in slot 1 and revived the base memory test and got the same error.  After removing the module slot 2 (location 1 remained outside) and rerun the test, it came back normal.  I put the module 1 GB back to location 1 (so now we have 1 GB in slot 1, 1 GB in slot 3 and 512 MB in the 4 Groove) and revived the memory test - it came back normal.

So I replace the 512 MB module and the PC should be back in 3 GB of RAM.

I still don't understand why the explanation has been found somewhere in HP.COM!

Tags: HP HP Desktops

Similar Questions

  • HP Diagnostics says: error code: BIOME-1. What is needed? Problem with RAM?

    My HP Pavillion wife has a problem, Windows Vista seems unable to repair. Diagnosis HP running I got the following error code on memory: BIOME-1, og videre: please contact HP support.

    Can someone tell me what this error code means. Is this a problem with the PC RAM?

    Thank you

    agerfugl

    It seems that your advice was helpful. The PC close more and after a little while it still works well.

    Thank you very much for your good and useful advice.

    Kind regards

    agerfugl

  • What does biome-1 error code

    What does BIOME-1 error code?

    Hello

    -When exactly you get the Biome-1 error?

    -What is the brand and model of your computer?

    Biome-1 error occurs when there is a defective memory module (RAM). To identify the who, remove one of the modules and then run new memory - test If it still not work, replace the module that you removed, remove it and test again.

    How will I know if my computer has a memory problem?

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

    If the problem persists, then contact the computer manufacturer.

  • Satellite A65-S126: I get error codes 7 and 4 - need to replace the internal RAM

    I was making mistakes first when I boot.
    Windows has a file missing or currupted (isapnp.sys).
    So I try to make a startup disk XP repair and while it is endearing to copy files, I receive other errror ' blah blah error code is 7 or 4.

    I did some research on all three errors and every difficulty unique potintial ram bad or bad Bios settings. I tried to reset the cmos and I've updated since the last version of toshiba. Always the same thing.

    I also replaced the ram with two sticks, that I had. The same problem. I think there must be some on board the cause of ram that I can get out the chip from the bottom and the laptop will always start and says it has installed 256.

    Where and how we replace RAM or what do you think?

    Thank you.

    Have you tested the memory? You can use Memtest www.memtest.org which is a floppy disk or a CD.

    Perhaps the error is just guessing what the problem is. File copy errors can also be caused by a scratched or damaged CD, bad CPU, defective HARD drive, faulty DVD drive or motherboard. If Memtest passes, then test the hard drive for bad sectors.

  • My hp DVD-RAM GH60L ATA Device receives an error Code 10. How can I fix it?

    My hp DVD-RAM GH60L ATA Device driver receives an error Code 10. (This device can not start..)

    I fact troubleshooting, uninstalling, looking for changes, then install (but didn't), I disabled and then enabled... Nothing seems to work.
    I checked if my driver needs an update. It is being updated.

    I use a Windows 7 Home Basic, 32-bit.

    Any other ideas on how I could solve this problem? Please and thank you! :-)

    This problem occurred after you update or install something?

    Have you tried the fixit of base?

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  • Satellite C850 - 13 error Code 19 - drive DVD RAM - X

    The DVD player does not work.
    Device Manager says there is an error Code 19

    I uninstalled the drive
    I scanned for hardware changes
    Who is the reader, but would not install the driver
    He said to contact my manufacturer

    How can I fix the error Code 19?

    We don't often use the DVD player, but want to make a recovery disk
    We have not updated the driver or installed a new device

    I followed the instructions on this page
    http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm
    Found and removed the * value, for UpperFilters and Device Manager reports an error.

    But I can still use the disc to write to a disc, I get this error reported:
    "Power calibration area error has occurred, please check if the media is scratched or dirty.
    It is not.

    The drive is dead?

    Post edited by: Don with additional info

    Hello

    What system do you use?

    Also have you tried to write data on discs of different brands?
    It might be possible that there is a problem with the disc incompatibility.
    So if you haven't tried different brands in the past, I recommend to do this.
    TDK are good and recommended use and test the R discs.

    Some users to also clean the laser lens. This helped also.
    Hydrophilic cotton tip and liquid alcohol is a good tool to get the clean laser lens.

  • 4SNS/1/40000000 error code: VDOR - 18.678 & 18.679

    MBP early 2011: I just ran the AHT twice, the first round gave me an error code of 4SNS/1/40000000: VDOR - 18.678, second inning gave the code 4SNS/1/40000000: VDOR - 18.679. Does anyone know what are these error codes? My best guess is probably the RAM, I have (2) modules of 8 GB 1600 Mhz DDR3 OR wireless networking equipment installed. I've noticed recently while multitasking, the wifi connection seems to cling and web pages will not load/downloads will pick up. But the way in which applications will be blocked for 60 seconds makes me think of a bad situation of RAM I have had in the past. Any help would be greatly appreciated since the nearest bar genius lies in 2 1/2 hour. Thank you!

    No RAM - 4SNS is a sensor error.

  • Work very well iMac 27 mid-2011 with 4MEM error code

    Hi, I have an iMac 27 inches, mid-2011 with 4 GB installed original (Elpida so-DIMM) so I improve it with 4 new 4 GB Kingston (ram value) KVR1333 PC3-10600 1333 Mhz DDR3 DIMMS for a total of 16 GB, after that my iMac works very well for three years with the daily use of any question and everything seems normal in "about this Mac" and in the "memory" tab no software issues no kernel panic , anything with a strange behavior, until three years after the upgrade memory, now I run AHT because the other reason (I can't work with a new MBP Mid 2012 airdrop both with El Capitan OS X) and it shows me a 64/4MEM/40000000: 0x8893cb98 error code, I reset the NVRAM and SMC, and same result AHT , so use MemTest86 from a V6.3.0 of bootable CD (full test upward at the end time spent 23 hours) and V4.3.7 showing no error in the two tests, also I ran mdsched.exe RAM Memory Sticks Checker windows (I have Windows 7 64 bit family Premium installed in bootcamp) and no ram detected error.

    While I should care that error? should I change my Ram modules?

    Thanks in advance

    You have a faulty memory card or the slot. That's what the error means generally. Make an appointment with the Apple Genius Bar for the service. If you need a Apple Store - find a store - Apple.

  • Cannot ping localhost - error code 2 on Satellite Pro A200

    Dear COMPUTER gurus,

    I have a portable Satellite Pro A200.
    When I ping the local host, it says could not contact the pilot of intellectual property, error code 2.
    I tried to fix the winsock using articles from microsoft without success.

    Now I want to reapair the operating system using the recovery DVD.

    The recovery DVD has a repair option?
    If this isn't the case, anyone how to solve this problem?

    Help please!
    This is the result, I was using the pc diagnostic tool.

    Date 2008-08-30 01:47:12

    [Information on PC]
    Model name Satellite Pro A200
    Part number PSAF4U - 004 00D
    Serial number Y7312740Q
    Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 2
    BIOS Version 1.70
    Processor Intel (r) Core (TM) 2 Duo processor T7250 @ 2.00 GHz
    RAM 1024MB of physical memory
    Disk capacity hard 120,031,511,040 [bytes] 111.788 [GB]
    Capacity of the hard drive space free 92,245,069,824 [bytes] 85.910 [GB]
    Version Mobile Intel (r) 965 Express Chipset Family video = 6.14.10.4833
    Screen resolution 1280 x 768 Pixels
    Color quality, true color (32 bit)
    Audio version of Realtek High Definition Audio = 5.10.0.5440
    Network Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller = 10.14.6.3 version = MAC address
    Intel (r) PRO/Wireless 3945ABG Network Connection version = 11.1.0.100 references MAC address =
    TOSHIBA Software Modem Modem version = 2.1.77.0
    Version of the IDE Device 1 TSSTcorp CDDVDW TS-L632H FW = TO01
    Interface IDE 2 no
    Interface IDE 3 no
    Interface IDE 4 no
    IDE Device 5 Hitachi HTS542512K9SA00
    Interface IDE 6 no
    Internet Explorer 7.0.5730.11

    Hello

    > I tried to fix the Winsock by using the Microsoft s articles with no luck
    I guess you're meaning to this MS article knowledge base:
    [How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP, and in Windows Vista: http://support.microsoft.com/kb/811259]

    Well, I searched a bit around and discovered that the solution described in article 811259 doesn t help in all cases

    So searched the Web of the 3rd party site and someone has suggested to try these tips.
    It s also from Microsoft:
    * [How to reset the Protocol Internet (TCP/IP) in Windows XP | http://support.microsoft.com/kb/299357] *.

    So check it out maybe it helps

    If not, then you may be forced to reinstall your operating system, because the repair option is not included in the Toshiba Recovery CD ;(

    Concerning

  • MacBook Pro (retina, mid-2012) Apple Hardware Test 4MEM/9 error code / 40000000:0x794a4390

    The first AHT I ran gave me the code of error 4MEM/9 / 40000000:0x79456d90.  I shut down the computer as suggested and then re run AHT and received the error code 4MEM/9 / 40000000:0x794a4390.  The two tests have been extended to tests.  Is that going to be an expensive repair?

    Thank you

    golden2

    The error indicates that there is a RAM problem.  Since you have a MBP of the retina, the only alternative you have is to take the MBP for an Apple store genius bar.  (RAM is welded in a MBP of the retina and is not accessible to the user)  The assessment will be FREE and they will advise you of all the costs involved.

    Ciao.

  • DVD-RAM GH60L CODE 39

    I HAVE A PC HP COMPAQ CQ3495AN, PURCHASED ON 01/08/2011. I NOTICED THAT THE DVD PLAYER IS NOT WORKING. WHEN THE ACTIVE DEVICE MANAGER IT SAYS DRIVER MAY BE CORRUPTED OR MISSING CODE 39 (HP DVD-RAM GH60L). TRIED THE UPDATE DRIVERS AND UNISTALLING TO NO JOY.

    Description CD-ROM drive
    Loaded media no.
    UNKNOWN media type
    The name HUAWEI Mass storage USB Device
    Manufacturer (Standard CD-ROM drives)
    State error
    Transfer rates 36000.00 KB/sec
    SCSI target ID is not available
    PNP ID of device USBSTOR\CDROM & VEN_HUAWEI & PROD_MASS_STORAGE & REV_FFFF\8 & 17D52EA1 & 0 & 1234567890ABCDEF & 0
     
    No available drive
    Description CD-ROM drive
    Loaded media no.
    UNKNOWN media type
    Name hp DVD-RAM GH60L
    Manufacturer (Standard CD-ROM drives)
    State error
    Transfer rates 0.00 KB/sec
    SCSI target ID is not available
    IDE\CDROMHP_DVD-RAM_GH60L___RD01___\4&BD10ABE&0&0.1.0 PNP device ID

    DOES THAT MEAN SOMETHING TO SOMEONE, PLEASE.

    THANKS BOB

    Hello

    Please try to fix:

    http://www.ehow.com/how_4693117_dvd-Device-Manager-error-codes.html

    Good luck.

  • DirectX unrecoverable error - Code: 15

    I got this message after installation Just Cause 2 steam.

    DirectX unrecoverable error - Code: 15 - the game will now stop. Try to run with the game /failsafe if the problem persists.

    The message appears when I try to play the screen flashes black and white, then the error pops up. Anyway, what is infallible?

    I meet all the requirements of the game. And I have already installed the directx 9 suggested thing runtime.

    Windows 7 (new laptop with already installed and all drivers have been updated)

    x 64

    DirectX 11

    Thanks for any help!

    DirectX is not something that you are installing a version. Install you all versions. Make sure that have all the files directX update via the directX Web Installer from the link below.

    The Web Installer will scan your machine and install all of the directX files may be required.

    The Web Installer updated with Update June 2010 will bring you and install no matter what d3dx9.dll who

    have been omitted from the package of Win7.

    Download details: DirectX end-user performance

    EDIT: (11/14) The DirectX Web install does not help if there is corrupted DirectX files. If it is corrupted

    Files DX you will need to download the full DirectX Redist (June 2010). This package will overwrite

    all DirectX files.

    Download details - Microsoft Download Center - DirectX Redist (June 2010)

    The main problem with Just Cause 2 would be the system specifications. 2 GB is not much RAM with Win7. My uses machine 1.25 GB empty without a lot of apps to start and a few disabled services.

    Is the machine has a graphics card or integrated graphics? If it has the latter you Just Cause 2 can be more than your chip can handle.

    This game requires 3 GB of RAM and nVidia GTX 250 or ATI 5750 graphics card.

  • Windows Vista, windows update error Code 80072F8F

    I get the error code 80072f8f. I searched the forums of discussion for something that will help, but nothing helped. I also lost the ability to use the system restore. I checked my timestamp in windows and it shows the date and time correctly. I even went into my bios to make sure that my system time was correct. Both are. I went to this Web page http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/10acefdc-297f-4d14-9f5c-5a90250a8b8c and followed the instructions but had no luck either.

    I don't know if system restore is a symptom of the same problem or one of its own. I ran into this problem when I tried to install a netgear 311t wireless network card. I have since deleted from the card and uninstalled the software, I don't know if the map was part of the question, but I noticed when I tried windows update in order to get a driver for the card. I am running Windows vista Home premium 32-bit on a Pentium D 3.00 ghz with 3.5 g of ram. Any help would be great. Thank you.

    Chris

    I was afraid you might say that!

    OPTION 1: Contact the Symantec Support.

    OPTION 2: Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

    HOW to do a clean install of Vista: see the "to install Windows by performing a clean install" (or "reinstall Windows Vista") http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista article

    NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

    After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

    4 steps to help protect your new computer before going online
         http://www.Microsoft.com/security/pypc.aspx

    Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

    VERY IMPORTANT! -Online free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the Norton removal tool (new) before installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (e.g., SAV, Microsoft Security Essentials - free).

    If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

    Wish I had better news for you. Good luck!

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • 70073712 error code when you try to install Win 7 SP1

    I am using Windows 7 32 bit on a machine with 4 GB of RAM 540 i3.

    I get error code 70073712 when trying to install Win 7 SP1 via windows update.

    I disabled all startup programs and services not microsoft.

    I ran the fix - it utility and update v10 system utility preparation x 86.

    I have still some errors on the log to check ON that I can't fix, I don't know if they help or not.  Log is shown below:

    =================================

    Preparation of control system was updated.

    Binary version 6.1.7601.21645

    Package Version 11.0

    2011-02-25 22:18

    Checking Windows Service Packages

    Checking of manifests package and catalogs

    Checking package Watchlist

    Watchlist checking

    Checking packages

    Control components store

    (f) CSI Manifest and S256H Do Not Match0x00000000 winsxs\Manifests\x86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.16664_none_03c12997716b5264.manifestx86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.16664_none_03c12997716b5264

    (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_a3a447e7a026fd8b08eef9015c3fd303_b77a5c561934e089_6.1.7600.20717_none_3c3b72980dd0607e.manifestx86_a3a447e7a026fd8b08eef9015c3fd303_b77a5c561934e089_6.1.7600.20717_none_3c3b72980dd0607e

    (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_microsoft-windows-smbserver-v1_31bf3856ad364e35_6.1.7600.16664_none_d9e264be57b7d382.manifestx86_microsoft-windows-smbserver-v1_31bf3856ad364e35_6.1.7600.16664_none_d9e264be57b7d382

    (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_9edaf6d3bef8e3b8a511c965c4676cc0_b77a5c561934e089_6.1.7600.20717_none_fba4726a5de9641a.manifestx86_9edaf6d3bef8e3b8a511c965c4676cc0_b77a5c561934e089_6.1.7600.20717_none_fba4726a5de9641a

    (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.20789_none_043a27fc8a94a8c3.manifestx86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.20789_none_043a27fc8a94a8c3

    (f) CSI Manifest and S256H Do Not Match0x00000000 winsxs\Manifests\x86_e8bf52ce827220c20c57727d1ef1b0f3_b03f5f7f11d50a3a_6.1.7600.20717_none_c2175e5f4430b21d.manifestx86_e8bf52ce827220c20c57727d1ef1b0f3_b03f5f7f11d50a3a_6.1.7600.20717_none_c2175e5f4430b21d

    (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_5f9114f1cdba6b133e611c33f9d42896_b77a5c561934e089_6.1.7600.16597_none_a1c1ac15f6bb52cb.manifestx86_5f9114f1cdba6b133e611c33f9d42896_b77a5c561934e089_6.1.7600.16597_none_a1c1ac15f6bb52cb

    (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_0f7a1a89936e7d82f675294dce25e472_b77a5c561934e089_6.1.7600.16597_none_b566a48eb4b33968.manifestx86_0f7a1a89936e7d82f675294dce25e472_b77a5c561934e089_6.1.7600.16597_none_b566a48eb4b33968

    (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_0d9aca2e69a54e84f2113f11119a3945_b03f5f7f11d50a3a_6.1.7600.16597_none_7ca86e604e0c3fd6.manifestx86_0d9aca2e69a54e84f2113f11119a3945_b03f5f7f11d50a3a_6.1.7600.16597_none_7ca86e604e0c3fd6

    Summary:

    Seconds executed: 58

    Found 9 errors

    County of apparent CSI and S256H Do not Match Total: 2

    Manifest CSI has not catalog check the total count: 7

    Unavailable repair files:

    winsxs\manifests\x86_microsoft-Windows-SMBSERVER-common_31bf3856ad364e35_6.1.7600.16664_none_03c12997716b5264.manifest

    winsxs\manifests\x86_a3a447e7a026fd8b08eef9015c3fd303_b77a5c561934e089_6.1.7600.20717_none_3c3b72980dd0607e.manifest

    winsxs\manifests\x86_microsoft-Windows-SMBSERVER-v1_31bf3856ad364e35_6.1.7600.16664_none_d9e264be57b7d382.manifest

    winsxs\manifests\x86_9edaf6d3bef8e3b8a511c965c4676cc0_b77a5c561934e089_6.1.7600.20717_none_fba4726a5de9641a.manifest

    winsxs\manifests\x86_microsoft-Windows-SMBSERVER-common_31bf3856ad364e35_6.1.7600.20789_none_043a27fc8a94a8c3.manifest

    winsxs\manifests\x86_e8bf52ce827220c20c57727d1ef1b0f3_b03f5f7f11d50a3a_6.1.7600.20717_none_c2175e5f4430b21d.manifest

    winsxs\manifests\x86_5f9114f1cdba6b133e611c33f9d42896_b77a5c561934e089_6.1.7600.16597_none_a1c1ac15f6bb52cb.manifest

    winsxs\manifests\x86_0f7a1a89936e7d82f675294dce25e472_b77a5c561934e089_6.1.7600.16597_none_b566a48eb4b33968.manifest

    winsxs\manifests\x86_0d9aca2e69a54e84f2113f11119a3945_b03f5f7f11d50a3a_6.1.7600.16597_none_7ca86e604e0c3fd6.manifest

    Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

    Can anyone offer any help on solving this problem and get installed SP1, as I'm stuck now!

    Thank you

    Thomas


    Hello Thomas_Si,

    Thank you for your message.  Please, try the following steps:

    Since you have already downloaded and run the system update tool, you can move on to step 2.

    1. According to your architecture of Windows 7, download / install and run the tool update system - CheckSur you can download the tool from the links below depending on your system type.

    Download the tool update system (64-bit)

    Download (32-bit) system update readiness tool

    2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator

    Inside the command prompt, type sfc/scannow

    For more information regarding the file system checker.

    * If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    3. once the SFC is finished, check your hard drive for errors.

    4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.

    5. perform a Startup Repair, when starting, try to install the Service Pack.

    Please let us know the details of each scan or utility. We can't wait to hear back on your part.

    See you soon

  • Windows 7 update error Code 800F0818

    OK I am trying to update: update security for windows 7 for x 64-based Systems (KB2286198)

    And I get a 800F0818 error Code

    All other updates install successfully.

    Searched everywere, tried online almost 50 different things and still nothing, Please HELP.

    Information System

    Name of the operating system Microsoft Windows 7 Home Premium
    Version 6.1.7600 Build 7600
    Manufacturer of operating system Microsoft Corporation
    System manufacturer 1E657
    System model 1E657A56
    System Type x 64-based PC
    Processor Intel (r) Core i7 860 to 2.80 GHz, 2801 Mhz, 4 Lossnay, 8 logical processors
    BIOS Version/Date American Megatrends Inc. 080016, 22/01/2010
    SMBIOS Version 2.6
    Windows directory C:\Windows
    System directory C:\Windows\system32
    The local United States
    Hardware Abstraction Layer Version = "6.1.7600.16385".
    Physical memory (RAM) installed 8.00 GB
    Total physical memory 7.99 GB
    16.0 GB total virtual memory
    13.6 GB available virtual memory
    Page file space 7.99 GB
    File C:\pagefile.syshave

    BTW I have currently done a footnote of windows 7 ultimate trial.

    Thanks I would appreciate any help.

    This error is sometimes related to corrupted in Windows system files.

    The error itself translates as: package of the container 0x800f0818 CBS_E_IDENTITY_MISMATCH points to a manifesto of the package whose identity does not match the specified identity.

    http://support.Microsoft.com/kb/929833

    I hope this helps.

    If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

Maybe you are looking for

  • Analysis of the subpixel resolution particle?

    Hello I tried to find books on the resolution of the analysis of particles of NOR. I read that it goes back to 1/10 of the original as well as the limits of the rectangle resolution, but is applies to all settings as well? Thank you

  • When I try to boot from a bootable usb key, his shows bootmgr missing error.

    Bootmgr mising when you use a bootable usb key. I have windows 7 nvidia 2010 on my desk. I have a new laptop with a free version of linux. my laptop do not have a CD or dvd drive to start. When I'm trying to boot from a USB bootable, his error showin

  • Question/the mouse pointer while playing music

    When I play music or through Media Player or Stream on Acer Aspire 17.3 "4 GB 8.1 Windows laptop and move the pointer of the mouse while the music plays music drags or glitches while the mouse pointer moves, but will stop if I stop moving.   Any idea

  • 15-f010dx HP: HP 15-f010dx corrupted Bios

    Hi all I have a HP 15-f010dx laptop will not boot.Indicated by 2 LED flashing BIOS corruption failureHave tried to update the BIOS (now WIn + B) with a USB, no luck. Warranty has expired less than 2 months ago. Any thoughts?

  • Black screen after update Windows 10 in Toshiba laptop

    * Original title: Windows 7 Hello, so I opened my Toshiba laptop and it led me directly to the black screen that says (look at the picture) and I was wondering what I should do to solve the problem because it led me straight to here. Please help as s