RAM for my desktop PC

Similar Questions

• Update of the modules of RAM for my desktop pc

  I want to buy G.Skill Ares RAM for my HP Pavilion G5460uk. The specs are below the RAM

  Model number

  Yes, memory G. Skill you watch should work. This would allow your system with 8 GB of RAM.

  Please send Bravo

• Maximum RAM for desktop system HPE-130cs

  Crucial.com say the maximum RAM for my desktop HPE-130cs is 16 GB (4 x 4 GB DDR3 pc3-10600). However, can I push it successfully to 32 GB with 4 x 8 GB modules?

  Hello:

  Here is the link to the product for your PC.

  http://support.HP.com/us-en/document/c01997177

  Maximum physical memory is 16 GB.

  In addition, please note that even if you could go beyond 16 GB (which you can't), you must have windows 7 Professional or ultimate edition installed as windows home edition premium does not run to a maximum of 16 GB of memory.

  Paul

• [RAM + VGA UPGRADE] Desktop Compaq DC 7600 Convertibile minitour PC

  I need to do an upgrade of RAM and VGA for a desktop Compaq DC 7600 Convertibile minitour.

  Should which Ram I buy for its motherboard 09F0H?

  I asked Corsair and they said that they have no compatible Ram for this system.

  I need 2 GB of ram, better if 2 x 1 GB for mode double channel.

  So should what Ram I buy?
  
  Also, can I use a Sapphire AMD HD 7750 on this system, even if the pci-e is 1.0 and the graphics card is through backward compatibility pci-e 3.0?

  Prego!

  This is excellent news.

  I am very happy that everything is working fine for you.

  Enjoy!

• adding memory ram for my HP media center m8000 pavilion

  Hi guys,.

  I just bought a pair of RAM (2x1GB DDR2) Corsair and tried inserting them in my Pavilion m8000. First I got a beep and the computer would not start (black screen). Next I went to release one of the rams and I got the beep to stop, but I just got the BIOS window when starting and it got stuck there.

  Did anyone experience a few problems I've done? If so, could you please help me.

  Thanks in advance for any response,

  Anthony

  Crucial makes it compatible to upgrade memory. Links this Google search of many upgrades memory for your desktop computer. Choose wisely and buy only those that are compatible to avoid other surprises...

• can I add a 16 GB of ram for my macbook pro 2010 Middle

  I was wondering if I could add 16 GB of ram for my MacBook Pro.  It is a mid-2010 model.

  Choose about this Mac from the Apple menu and check the processor.

  If it's a Core 2 Duo Mac, click here.

  If it's an i5 or i7 Mac, no.

  (141840)

• 64 bit Windows7/8/8.1/10 USB drivers for Palm Desktop

  Thank you people much more to Aceeca.com (Palm OS Garnet NEW manufacturers), the USB drivers for Vista, Windows 7 and 8 Win 64 bit operating systems are available.  There are many users Palm Desktop 4.x strives also to the declaration.
  
  I have synced my TX my Vista64 laptop computer bits and Windows 8.1 HP spectrum X 2 hybrid successfully through my USB cable.
  
  The drivers are located here:
  
  Aceeca Driver Downloads

  (NOTE: as of today, 01/08/2016 Aceeca site to be down for 'construction'.)  Drivers can also be found here: http://www.palmdr.com/windows-7-64-bit-usb-drivers)

  Installation instructions for Windows 7 (from Aceeca) are included in the download.
  
  Basic instructions:
  
  1 download the drivers and extract them in the same folder.  Remember the folder that you extracted to.
  
  2. try to HotSync your device.  It will fail.
  
  3. open the Device Manager and look for the yellow Triangle next to the other "Acceca" or "'Palm device ' in the"Other devices"section."
  
  4. right click on the device and choose "Update driver software".
  
  5. choose "Browse my computer for software" and guide them to the folder that you extracted the drivers Aceeca.
  
  6 choose 'Next' in the driver and then file location window tell him 'Confidence always Aceeca Ltd. software', then click on the button "install".
  
  7. I received an error message (Vista64) who told me "the drivers have been installed, but the device could not be opened." I realized my TX had expired, and fell asleep.  I tried a HotSync and it worked!

  Good luck!

  NOTE: Palm Desktop 6.22 may only multimedia show and install.  Here's how to fix this:

  If Palm Desktop 6.2.2 shows only the media and installation, try this: right click on the shortcut for Palm Desktop, and then choose 'run as administrator '.  Other modules should appear.

  To Palm Desktop run as administrator every time in Windows 8 / 8.1:

  Close to Palm Desktop, if it is open.  (This is a very important thing to do when you use 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)

  Right click on the desktop icon of Palm in the metro screen, then choose "open file location".  You will now see the actual file for the shortcut.

  Right-click on the file "Palm Desktop" shortcut, then properties.  Now, choose the tab compatibility at the top.

  At the bottom of the Compatibility tab is a checkbox: "run this program as an administrator", click OK.

  Try to open the Palm Desktop, all parties must appear.  You can see a box opens when you close the program asking "did the program runs correctly.   I chose 'Yes', and it has been working fine since then!

  If you are using a much older PalmOS device and try using Palm Desktop 4.x, you will need this additional patch Pimlico Software:

  Palm HotSync configuration

  WyreNut

  Forum member bobboffin has added this message:
  
  "After you try your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step very difficult. It is me, and after some research, I discovered the following trick that allows Device Manager to display hidden and devices not present.
  
  Open Notepad and paste the following two lines are:
  
  Set DEVMGR_SHOW_NONPRESENT_DEVICES = 1
  Start devmgmt.msc
  
  Save it as SetDev.bat in My Documents.
  
  Open My Documents in Windows Explorer and double-click SetDev.bat. Device Manager opens.
  
  On the view menu, select Show hidden devices.
  
  You can now see in the other position of the device with a yellow triangle against it.
  
  You can now proceed to install the drivers according to the instructions.
  
  Note that the driver supports most versions of Palm OS. "I actually use an Aceeca Meazura 1000 rugged PDA running OS 4.1 - bobboffin.
  
  I hope this helps!
  
  WyreNut

  pattirclark wrote:

  
  

  SUCCESS... After writing my last response indicating no connectivity, I tried a last time and success for the Palm Palm devices and synchronization with 64-bit Windows 8 71 22.  Thanks again to WyreNut for all the support that I know that this Forum is an advantage for those who have limited computer knowledge and detailed suggestions has worked perfectly...

  Thank you again...

  And thank you! pattirclark!  You are the first person to report success with drivers Aceeca and Windows 8!

• HP 110-023W: I need boot disk installation instructions for my desktop PC.

  I replaced my hard drive and I am looking for the instructions of installation for my boot disks I just ordered, but don't see anything on the forum for my desktop HP 110-023W.   My original OS was Windows 8, but upgraded to Windows 10.

  jpryzl30

  If these "boot disks" were the support of HP recovery, the process is simple.  When you download the floppy disks, insert the first disk in the CD/DVD drive and boot the PC.

  Simply follow the directions for each of the other disks, inserting in turn.

  You must note these discs to reformat the hard disk, remove everything on it and restore its original state.

  If is not a support of HP recovery, we cannot help you and you will need to contact the provider of the disks for instructions.

  Good luck

• Need to RAM for Qosmio E10

  Can anyone advise where I can get ram for my Toshiba Qosmio E10 series at a reasonable price?

  Thanx

  Maybe you should just google for some good offers is a simple way to know what dealer is the cheapest ;)

  Have a look here:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=6985&ft=m&St=3

  Qosmio E10 can be upgraded with the * 200-pin PC2700 (333 Mhz) DDR SODIMM * bars! And you can upgrade the RAM up. 2 GB (2 x 1024 MB)

  Hope I could help.

• What is the configuration of the maximum ram for a 2007 iMac 21,5 "

  What is the configuration of the maximum ram for a 2007 iMac 21,5 "

  There is no such thing as a 2007 21.5-inch iMac; the 2007 iMac is all 20 or 24 inches. Click here and search for your model; the page it will say.

  (141476)

• Y at - it a clear indicator or a code to indicate if a stick of RAM is registered or unbuffered? I would like to know for sure before installing additional RAM for this Mac Pro (2013). Thank you in advance. David

  Hello, all:

  Y at - it a clear indicator or a code to indicate if a stick of RAM is registered or unbuffered? I would like to know for sure before I add that extra RAM for the empty slots this Mac Pro (2013) that a 2 x 8 is installed.

  Thank you in advance.

  Appleharvest

  Post edited by: AppleHarvest (typo corrected)

  The 4 and 8 GB sticks are not saved while the sticks of 16 and 32 GB are registered. As you seem to know, you can not mix registered and unregistered sticks. For example, you can only add 4 or 8 GB sticks to your present 8 GB sticks

• Upgrade of RAM for Satellite A10-S403D

  Hello

  I have a laptop Satellite A10-s403D, quite old, but still works fine. I would like to add a few more memory (there now 256 MB).
  Could someone advise me as to what type of RAM to use (I'm completely lost with all these formats available)?

  Thank you!

  Hi Roman,

  Please see the link depending on which has the details of the RAM for your laptop.

  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=24882&ft=m&St=3

  Kind regards

• New RAM for Satellite Pro A60

  Hi guys, I got a Toshiba Satellite Pro A60 for about a year now and am lloking to buy little RAM for that I met two links that seem similar, but have different prices. The first link is www.dabs.com and it is "Crucial 1 GB 200pin SODIMM PC2700 DDRRAM without parity"

  The link to it is
  http://www.dabs.com/ProductView.aspx?quicklinx=31BB&SearchType=1&searc hTerms = DDR + PC2700 & PageMode = 3 & SearchKey = All & SearchM ode = All & keys = 50090, 4294957152, 40387

  He has on the actual key that it is an essential product and this second link is crucial.com/uk and seems to be the same thing but different prices
  http://www.crucial.com/UK/store/MPartspecs.asp?mtbpoid=8AB46FD7A5CA7304&WSMD=SATEL lite + Pro + series A60 & WSPN plus CT419262

  Basically, I was wondering if someone could help me telling me if these two are compatible with my laptop, or are the same as the other and which recommend you for me. And sorry if it is too much but can anyone give me any help on installation of the RAM chip? It is difficult to do at all?

  Thank you very much if you can help me out in any way possible.

  Hello

  The original RAM module apart from the number PA3313U-1M1G (1024 MB PC2700). It is always recommended to use tested and original pieces, as many users have a problem after the purchase of the module to different inexpensively.

  In my opinion, you can buy cheaper and test. If there is no problem you can return.

  Good bye

• Upgrade of RAM for hp G62-451sa

  Hey, my names Tom and I'm new to this forum.

  I have a 2 HP G62-451sa bought new years. I discovered that my use of physical memory is extremely high (80-90%) of the 3 GB of Ram (1 GB + 2 GB) I have. I have a 64-bit windows, and I'm looking for RAM upgrades. Can I switch to 8 GB (2 x 4 GB)? and if so where can I buy those replacements of 4 GB of ram for my model because I have found none to my computer through to look at many sites such as crucial.com etc... But what can I use other upgrades of RAM for notebooks G62 like G62-450sa?

  Thank you

  Tom

  Hi, Tom:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c02542455.PDF

  Chapter 1 page 1-1 provides the memory upgrade information (Yes, you can install 2 x 4 GB of PC3-8500 memory or 10600).

  Just make sure you get chips with 8 black memories of each side of the Board.

  Unless you live in the United States, I know not what brands are available in other countries or where you can buy them.

• Upgrade of RAM for Satellite Pro 3400

  Hello

  I own a laptop Satellite Pro 3410, it has pentium celeron 600, 64 MB of ram and 13 '' dstn display. I want to upgrade my ram, somewhere, I read that it can be improved with 256 MB, so that there then 320Mo. My question is now, what I have to use 2 pieces of 128 MB of ram or can I use 1 piece of 256 MB of ram. The point is a friend gave me a 256MB ram for PC laptop (pc-100) toshiba, I put it and it seems to work (win2k showed me the 320Mo compleet), but can it be problems, using this a big RAM?

  I hope you can help

  Katja

  Hello

  I think you mean a Satellite Pro 4310?

  Normally it only uses the modules of memory up to 128 MB. But if your laptop is running with this 256 MB module, there should be no problem.

  Good bye