RAM is not recognized on Satellite L650-1MC

Similar Questions

• Only 1 CPU Core is recognized on the Satellite L650-1MC

  Hello guys, once again

  As the title says, only 1 CPU core is recognized on my L650-1MC. There an i5 480M CPU.

  http://Ark.Intel.com/products/52952/Intel-Core-i5-480M-processor-(3 m - Cache - 2_66 - GHz)

  A monitoring program called 'speccy' says:

  Intel Core i5
  Carrots 1
  NET 2
  Name Intel Core i5
  Code-named Arrandale
  Package Socket 989 rPGA
  The 32nm technology
  Specification Intel (r) Core i5 CPU M 480 @ 2.67GHz
  Family 6
  Extended family 6
  Model 5
  Model expanded 25
  Not to not 5
  Revision K0
  Instructions, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, Intel 64
  Virtualization supported, enabled
  Hyperthreading is supported, enabled
  134,0 MHz bus speed
  2412,6 MHz rated Bus speed
  Base speed 2666 MHz stock
  Stock of 133 MHz Bus speed

  L1 Data Cache size 32 KB
  L1 Instructions Cache size 32 KBytes
  L2 unified Cache size 256 KB
  L3 Unified Cache Size 3072 KB
  Core 0
  Basic speed 2934,1 MHz
  Multiplier x 9.0
  133,4 MHz bus speed
  2400,7 MHz rated Bus speed
  Temperature of 52 ° C
  Thread 1
  APIC ID 0
  Thread 2
  APIC ID 1

  The task manager has two graphics and I can change to/from the "one graph per cpu and one graph, all CPUs" in the options display, although that I thought she should have 4 graphics; which is logical that the CPU has 4 wires, so should have 4 graphics.

  Any ideas? I tried msconfig and reset the number of processors, but then it resets the memory to 2 GB so I have to reset that and restart it to recognize all the 6 GB of ram. but then my cpu is a nucleus! It seems that I have a dual core cpu and 2 GB of RAM or a simple core cpu and 6 GB ram! ATM I'm on a single processor core with 6 GB of ram. I think the only thing I can do is reset the cpu in msconfig and reboot and see if it works, but then it will set the RAM to 2 GB. I 'afraid' to uncheck the CPU and RAM at the same time, incase of my laptop computer won't load at all. What do you think?

  It is not too much a problem; If I had only 2/3 GB of RAM, then it would be a problem, would be just nice to have my CPU dual core of return!

  As always, I would be really grateful for any help with it.

  Thank you for taking the time to read this.

  Hello

  You tested it with a 3rd party software called ' speccy
  Have you tested other tools like Everest Home Edition or CPU - Z?

  Strongly recommend do it and compare the results, because a single tool can provide erroneous values.

• Satellite L650/1MC - WiFi and LAN connection keep dropping out

  In the last two weeks, that my wifi connection dropped regularly - only a reboot solves the problem. Because it became so frequent (and boring) I returned with an ethernet cable, which worked OK for a few days, but tthat hen started making the same thing: no internet connection.

  I must emphasize that my other active wifi (android and android phone Tablet) kit continue to connect to internet via wifi etc, even when the connection of the laptop has fallen. This leads me to suspect that the problem is mobile partner no router etc. relates. The laptop is rarely used on battery, so I do not have the power as a problem management.

  I have a Satellite L650/1MC running W7 64-bit. I made no changes to my system recently which may give rise to this problem - everything works perfectly until a few weeks before.

  I checked for updated firmware updated on my router in the case where it is the question - it's not.

  Any suggestions to fix this annoying would be welcome!

  > I checked for updated firmware updated on my router in the case where it is the question - it's not.

  Have you tried to reboot the router?
  Since the two connections (LAN and WLan) stops falling, I think that the router is the problem.
  OK, two other android devices seems to work properly but the fact is that router shares automatically and possibly IP addresses, the IP address cannot be assigned correctly.

  However, you can check the WLan and LAN TCP/IP protocol settings.
  Uninstall the TCP/IP v6 and use only the v4 TCP/IP for LAN and WLan.

  Also ensure that your security programs (firewall & anti-virus software) don't affect the internet connection.

• Positioing on Satellite L650-1MC USB port

  I just bought a Satellite L650 1MC having already owned a previous version. The amount of the fine with the exception of one major flaw - the USB ports are on the side rather than on the back, so I have cables around the office (mouse, printer and disk backup). Those on the right also fault the CD player when you try to use it?
  Why is it was designed this way?
  Someone else has this problem and is there one solution other than buying an expensive hub wireless router or wireless peripherasls?

  I can't tell you why it is designed on this journey, but the best way to get rid of a cable (mouse) is to use the mouse with receiver microphone wireless. Even if you take your laptop with you, it doesn't have to be removed.
  I assume that the backup device and the printer should not be connected all the time. You have a mobile device and it is designed to be with you everywhere.

  If you use it as a desktop replacement, I think you should get a small USB hub. I put t see any other solution for you.

• Tecra M5 - DVD - Ram is not recognized

  Hello

  This is my 1st post, so this is.
  I have a Toshiba Tecra M5 my old drive has just started to slow down, I bought a new drive Tsstcorp SN-S082H/baby.

  When I slot the drive in the Bay is not recognized by the system immediately unless I'm going to add harware and ASNA for new hardware, and then he picks it up,.
  When stop & restart lappy dvd - ram is not recognized by the system, or BIOS, the light on the flange of the discs is on but when I press the button open nothing happens. I installed the latest firmware, I also don't you any driver of indevice error messages sound as if the reader is not installed, but the light on the drive is turned on but does not open.

  Some1 can help me please?

  Model name: SN-S082H/baby
  Code OEM: TS
  F/W ver. SB01

  Follow the instructions posted by Akuma. Maybe this can solve the problem.

  Also, I checked the Tecra M5 user manual. There is a list with compatible DVD players, and your new drive is not listed. Not every drive is compatible with any laptop.
  If it doesn t work get the reader to the merchant computer buy a compatible player that is listed in the user manual:

  TEAC CD-224EN
  TEAC DV-28EN
  CCP UJDA770
  TSST TS-L462C
  Pioneer DVR - K16
  CCP UJ-841

• Satellite L650-1MC begins to be very slow

  Hi guys,.

  I have a Toshiba L650-1MC, with an Intel i5-480M dual core with hyperthreading (2 cores, 4 threads), and since last Thursday (May 10, 2012) it was * very * slow.
  The hard drive led is * always on, * and when I resize a window sometimes does not.

  It has 6 GB of RAM (upgraded from 4 in February this year), and I'm running Windows 7 Home Premium 64 - bit.

  Here is a list of the things I've tried:

  -Made a * _full_ * scan of Microsoft Security Essentials, which showed no infection.
  -Removal of 15 GB of files and software (disk cleanup, defragmentation, CCleaner, add remove programs and my old documents ect)
  -Disabled several startup programs.

  I'm really anxious to get back to how it was, System Restore is not an option as the only restore points are from before I installed Office 2010 and I am very reluctant to do a system restore, because that would mean use my license 2nd and last for MSOffice.

  Any ideas before going through the recovery methods? As a last resort, I can format the drive and do a clean install of Windows 7.

  I would be really grateful of * any * ideas/suggestions you may have, because I'm really disappointed by how slow it runs and would like to get back to how it was.

  Thanks in advance.

  > Any ideas before going through the recovery methods?

  I m wondering why the HARD drive light is still on did you check the fitness of HARD drive?
  I would recommend this making the nice tool for such job is Drive Fitness Test Utility.
  Is a freeware and can be downloaded on several pages.
  Check the HARD disk using this software.

  If there would be no error, you can try to recover the laptop as suggested by the detachment
  But
  You did a good job. I would also clean the system using CCleaner, maybe you should try extra to defragment the HARD disk

• FN + F5 does not work on Satellite L650

  Hello
  Sorry bit of a newbie here.
  I looked and can seem to find the answer...
  I have a Satellite L650 running windows 7 64 bit. HDMI worked fine until about a week around the outlet. I do not think that I have installed everything that would have the effect it but now it has stopped working. TV captures the fact a cable is plugged in, but not signal. the software Intel says that it supports screen duel. The FN + F5 stopped working as well as the FN + F8 (don't know if this is related) other FN keys seem to work OK. I tried the software for the hotkeys to re - install. but do not seem to be able to find it for the 64-bit windows 7.

  Comments help or welcome points.

  Thanks in advance.

  Hello

  Looks like you got remoed the software of Toshiba which controls the FN keys

  As written you need to added value Pacakge Akuma. This software contains all the software/drivers needed for the FN keys and other special functions you need to use the laptop properly.

  You can download it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Display drivers do not work on Satellite L650 PSK1JE

  I would not pay 1.50 per minute for the Toshiba hotline get direct assistance with my problems with a product i once paid money (not bad), the Toshiba Satellite L650 (PSK1JE) laptop, so I try this way and hope that I get help.

  Sorry for my bad English, I'm from the Germany and have not found a German advice here (I wonder what other costumers / are forced to do it...)

  To make a long story short: I need the current drivers for my graphics ATI Radeon Mobility HD 5650.

  -If I download at ATI, I download the Catalyst Center. Installation fails because the program tells me that the graphics cards do not match. I don't know why.
  -so I downloaded the drivers on the Toshiba homepage. The results: they are installed, but now I can set the resolution to 1024 * 768. So I re-roll my system to get rid of that joke.

  What are the possible solutions to this problem? How can I get the drivers for my graphics card that really work?

  I'd appreciate any help, thank you.

  Hello

  The resolution depends on the screen
  If the screen does not support a higher resolution, you will not be able to choose

  But AFAIK the L650 supports a 15.6 16:9 ration screen and the available max resolution is 1366 x 768

  Take a look at this document:
  http://APS2.toshiba-tro.de/KB0/TSB0502VW0000R02.htm

  There is a tool that allows you to activate the resolution supported max.

• Not recognized on Satellite 3000 514 Notebook memory intermittedly bench

  At the start of my satellite 3000-514-Notebook, which contains 2 banks of memory of 256 MB each, the upper 256 MB Bank very often is not recognized more, and my laptop runs on 256 MB only. Initially, this happened only when I started in hot condition, while that morning, all 512 MB has become available. All memory different tests, including MSDiag, show no error when running with 256 or 512 MB (when available). but the laptop does not start when I change banks of 2 memory or simply use the top Bank in the lower position. I would just buy a new memory of 256 MB of memory, if I was sure that the memory and not the motherboard is the culprit. Anyone have an idea how I could fix this?

  > I would just buy a new memory of 256 MB of memory if I was sure that the memory and not
  > the motherboard is the culprit

  Therefore, the diagnostic test is necessary.
  A technician can test the memory slots with different memory modules and after these tests, it can give you a detailed report.

  I don t think that everyone here will give you a 100% solution. We can speculate and it s something wrong with the memory module or the motherboard. But a test is necessary to ensure the fault.

• Equium A60: DVD - RAM, being not recognized correctly

  Hiya!

  I have an EA60 and my carpet * a DVD-RAM UJ-820 s is currently not recognized by the laptop properly. When I go to device drivers, he said the driver has been loaded but returns the error code 41. I reloaded the Driver and the device, and it makes no difference.

  I also bought a new Pioneer DVD-RAM and it comes up with the same error code.

  Can someone help me please?

  [email protected]

  Kind regards

  Gary

  To start the registry editor
  Click Start, run, type regedit, and then click OK. Start the registry editor.

  Then follows the steps described above.

• Bluetooth is not recognized on Satellite Pro A100

  I have a Satellite Pro A100 828 running Win XP Pro.

  He is supposed to have integrated bluetooth but when I install the bluetooth stack, a message appears saying peripheral usb has malfunctioned and is not recognized by windows.

  In Device Manager, it is listed as an unknown device.
  I tried different versions of the bluetooth stack, but the same message still appears.

  Is there a software fix for this or does this mean that my hardware is defective? Would be grateful for any advice.

  Thank you.

  Hello

  where downloaded battery Bluetooth? And another question: do you have bluetooth never work properly? It would be interesting.
  Try another might be to download a Linux Live-CD and to check if the problem is perhaps more a hardware related issue.

  So, if you need an alternative download source then try this address:

  http://209.167.114.38/support/download/ln_byModel.asp

  Greetings

• Network controller is not recognized on Satellite A100 Windows XP

  Hi all!

  I bought a Satellite A100 PSAAR and I did a clean install of Windows XP on it. I installed all the drivers in the correct order (downloaded from the support page) but I still have a problem:

  Ethernet controller and network controller appear with a yellow exclamation point in Device Manager, and they are not recognized. I have downloaded the driver lan and I managed to do recognize the ethernet controller. However no matter how hard I tried, I can't find the correct driver for the NETWORK CONTROLLER, which still appears in Device Manager in yellow color.

  I really could use any help here... Thank you in advance.

  Hello

  Shouldn´t be a big problem to get some drivers for your machine's real lan. Just go here:

  http://www.Intel.com

  and download the intel proset for ethernet controller. If you didn t already installed the wireless card, do so. Otherwise the other network controller could be the bluetooth adapter.

  It would be nice to hear from you...

  See you soon

• Device Intel WLan 6230 USB not recognized in Satellite L655 running Win8

  I installed the Intel Centrino card 6230 WLAN for laptop Toshiba Satellite L655 of my wife (introduced to my HP laptop, but due to their allow list, it does not start... but it's another story).

  Wifi works a treat, and I'm pulling in a little more speed of 100 mb/s (http://www.speedtest.net/result/2328501761.png) to connect to my router dual band 5 GHz.

  I understand this card features also the Bluetooth capabilities and I think that is where my problem comes from.

  I get a warning balloon will appear in the system tray saying "Device not recognized USB" (http://imageshack.us/f/208/intel62301.jpg/).

  I followed various supposed fixes, including the removal of the drivers, as you can see from the photo I've already done. As I'm under Windows 8 Pro 64 bit as soon as I restart the WLAN driver is automatically re-established.

  I tried to install the drivers several times, but I always get the error message as below: -.

  http://ImageShack.us/f/41/intel62302.jpg/
  http://ImageShack.us/f/822/intel62303.jpg/

  I'm looking for one of the 2 solutions.

  1. get the device working properly - Bluetooth & Wifi - there Toshiba never do drivers for the 6230?
  2 disable the ToolTip of the USB, I can do this as a stop, but as soon as I reboot it is back bothers me!

  Any help is appreciated with gratitude.

  Hello

  I m bit confused.
  Your problem is the message: saying 'USB device not recognized '.
  Right?

  Why do you as his associates to the new wireless network card?
  I checked the screenshot you posted above and card WLan (Intel Centrino Advanced N 6230) appears in Device Manager then its recognized by Win 8, thus

  On BT taken in charge by the Intel card.
  I found this software Intel® PROSet/Wireless Bluetooth for Windows 7
  TM http://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21713&Keyword=Bluet & lang = fra
  Normally it should work with Win 8 too.
  Maybe what you are looking for.

• Problem: Memory PCI Flash not recognized on Satellite M30X

  Hello

  Windows XP does not recognize my multicard reader. That he has still put memory PCI Flash not recognized (2 locations)

  I tried - uninstall the driver (and the camera) and reboot: does not work
  -install the cardbus driver: does not work either

  Have any hint?

  Mouk

  PS: Sorry for my bad English, I'm French ;)

  Hello

  Are you sure that the card is compatible with your laptop?
  As far as I know the card on the left site reader who, only available on some models, allows you to insert and read data from the SD card, smart media (SMM) MemoryStick pro, Multimedia card and XD picture cards.

  The PC card slot supports cards PCMCIA Type II

• USB 2.0 devices are not recognized on Satellite L

  Hello

  All of the usb 2.0 device is not recognized on my laptop.
  I got a message stating that the driver are not installed. I'm looking for the driver on the support site, but could not find them...
  I've updated the bios and chip set utility, but still nothing.

  Any idea?

  Hello

  What model of laptop do you have?
  What operating system do you use?
  Since when you noticed this problem?
  Did you test all USB ports?

  Have you tested with different devices USB ports?

  Please post a little more information.