Ramdomly PC turns off and restarts. Won't do in Mode without failure.
Hello. FO; lks!
I saw similar posts, but nothing exactly like this one.
My PC randonly shut dow and start times ranging from 1 minute to 20-30 minutes. The frequency seems to be getting shorter. The PC will apparently still be Mode without failure.
I tried to remove recently installed software and do a system restore.
When I originally started to have this problem, I am running Vista Ultimate. After trying my limited number of tricks, I took the device to the local computer repair company. At first, they thought it was a problem of overheating but memory, power and MoBo all checked. When I told them to let it run a few days in safe mode, they said it should be the software, so they upgraded me to to Windows 7. This does not solve the problem.
By reading this forum, I saw the mention of the verification of the file running. I did and all I get now is BSOD.
My system is: 2.67ghz i7 processor of Intell, ASUS MoBo, 6 GB of RAM and a 1 TB hard drive and a DVD burner.
I copied some of the most recent event logs to Word.
Any help appreciated.
Hello
Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
Clean the dustbunnies by ports. It works better in Mode safe mode because the system
is not as pointed, especially the video. Therefore, the system is probably overheating or heat
the sensors are too sensitive, or both.
To be able to remove ALL and reinstall all the cables (both ends), card and memory - in fact remove and
replace - do not just tight. (Of course these are for a PC and not a laptop).
This sounds like material so if the above does not help you then probably need the help of a
real computer store (not of leeks and glances at a Best Buy or other department stores) or the system
Support from the manufacturer.
===========================================================
Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
Troubleshoot the BlueScreens - top 3 methods. Be sure to look to the top of each Bug_Check to FaultWire.
------------
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html
-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
time of the BSOD to provide more information about the possible cause - see TIP.
MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html
------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
application goes down has occurred in your system. The information breaks down is extracted from the .wer
the files created by the Windows Error Reporting (WER) of the operating system component of each
time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.html
------------------------------
Also do this so you can see the probable bluescreens. (You may or may not be able to see
them if they occur even after doing this according to the cause.)
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html
=========================================
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
Portege M400 randomly turn off and restart
Hello
I was wondering if anyone has any suggestions on what's wrong with my laptop? Two days ago began to randomly turn off and restart. I checked the following:
-Execution control online Panda Security virus etc - all ok.
-Check the system of newspapers but all it records is an error "windows has stopped unexpectedly".
-Suspect an overheating problem I took it to pieces, clean all the dust from the fan and the heat exchanger. Also cleaned up all the old thermal paste off the CPU and replaced with new ones. It works now much cooler but always stops at random.
-Run a Suse Linux Live DVD to check, it certainly isn't a problem with the OS and it stops again.I'm guessing that something is short circuit on the motherboard because it will run ok if it is on a flat surface and not moved and I do not press too hard while typing etc. However, it is a bit hit and Miss. If someone has had this problem before and there at - it something else I could try? Also any ideas on is how a new motherboard? I expect probably expensive :( If there is any kind of fix I can do myself? I'm pretty technically minded and do not have a problem with taking it bit do not know much about electronics, engines are more my thing :D
TIA, Firedrake
PS The laptop model number is PPM40E running Vista Business.
Hello!
I m not an expert in laptop but in my opinion, it sounds like a hardware malfunction. The reason could be a faulty motherboard or something else.
I mean you already tried Linux bootable disk, so I think that the problem is not bound by the OS.I put t know how much a new card mother cost and if it s difficult to Exchange or not, but you should contact the nearest ASP that you can find on the Toshiba site. The laptop technicians can check your laptop and order a new card of mother.
http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service providerGood bye
-
my list of network services is turned off and it won't turn
my list of network services is turned off and it won't turn
do you mean;
the list of devices on your network?
in network and sharing Center, Center
advanced sharing settings
turn on network discovery
then try a reboot... see if this leads him to the top.
-
in the blue screen it rights something that suddenly turns off and restarts again.
in the blue screen that he rights something that suddenly turns off and restarts again.my at startup of windows and after it notifies wait me and it stays like that for a long time and restarts again. Help
Hello
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.
You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
A couple of days, I did a restore of the system at the end of July because the size of everything was off of the big time and had never done a system restore before. Since I did, everything is returned to the way it was before sizes... and I can receive and send emails... I have JUST CAN NOT open attachments on e-mails. When I click on the attachment to bring it up, it shuts my computer off and restarts it and when it turns on it says that it has recovered from a serious error. How can I fix my email so I can set up attachments?
What e-mail program?
-
BlackBerry Smartphone screen my BB turns off and restarts and my battery drains
Hello world!
I really need help. About 4 days ago my BB 8310 started acting very weird. First of all, it began to consume the battery like crazy and then whenever I played BrickBreaker it erased. When he returned he said Eception Exception: error in Java Lang. I have v.0.912 of UberTwitter and had not had a problem until 4 days ago. Yesterday, I downloaded DeskTop Manager v 5.0 (mine was v. 4.5), deleted BrickBreaker and re-installed, deleted UberTwitter and re-installed but I still have the same error and battery drain. I have updated my OS to v. 5.4 approximately 9 months, and the device was working beautifully. A month ago, I downloaded the Application World, but deleted because it has slowed down a bit from my device.
Issues related to the:
1. do I have some sort of corrupted file?
2. If so, do I have to do? I read here that maybe I should do a wipe, how can I do?
3 What kind of worm or virus? I say this because I live in the Venezuela and the unit started acting weird at a political event I attended, could my BB were attacked?
I depend on my BB for EVERYTHING and feel at a loss, please help me.
Thank you in advance,
Jazzdancer
I've never been compared to God lol! I'm just an average user like you doing my best to help and learn from these forums so
About the battery drain:
1 make sure that you do not have applications running in the background that are constantly send and receive data unnecessarily
2. turn off your bluetooth when you are not using it for long periods of time
3. If you are in a weak signal area (two bars or less) it tends to drain the battery in a meaningful way
4 'reset' the battery meter by draining the phone at 15% and then recharged completely. This must be done on a regular basis just to make sure that the token is correct
5 use the case to put the phone in standby mode (saves battery power) or manually put the phone in standby mode by pressing the mute. There is also an application called Autostandby that can do this automatically for you after x idle time
6 lower the brightness of the screen and reduce the time before he died.
In general, the data more service use and talk to you with the telephone reduces how long the battery will last. The battery performance degrades with time, but I don't know how long it is normally expected to last.
Be sure to charge the battery when possible and never let drain competely. These batteries do not require conditioning as other batteries and batteries load when possible.
If your problems persist, consider buying another battery.
Hope this helps and let us know how it works for you
-
my system will be able to save fact and I can't get out of this unless I turned off and restart
is there any settings I need to adjust
Hi sauger69,
Take a look at the following troubleshooting steps with Karena R:
Windows 7 contains several troubleshooting programs can automatically fix some common problems with your computer. One of them is solving the problems of power. Although convenience stores are not designed to solve all the problems, they are a useful to try first thing, because they can often save your time and efforts.
Method 1: Run the troubleshooter of power
The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'.
http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter
Method 2: Troubleshoot wake the computer from sleep mode
http://support.Microsoft.com/kb/266283
Note: even if the steps described in the article are applicable only to the Microsoft mouse, you can always give it a try.
here original thread
I hope this helps!
-
Why my computer turns off and restarts when I try to play the video?
If I try to play a video, my computer starts, stops and restarts. I tried to find a solution, including Mr. Fix It, nothing helps. I cannot find a quick answer, is there something that I am missing? My camera is an older Windows XP program that crossed a unknown virus attack.
Did you remove the virus? It looks like his crash. Restart and hold down F8, and then select Disable automatic reboot. The next time it hangs, what we said the blue screen. And if it shows the name of a file or a driver
-
HP ENVY 700-325 suddenly turns off and restarts, BIOS problem?
Hello
I bought the DESIRE d 700-325 on a month ago, and only after several hours of use, it starts to stop itself and restarts again.
I returned it and replace it with a new one and after two weeks (seriously - he is not bought from the HP Web site in any case) when I came back, she goes out always se...
Inside the PC is fine I think, all the fans work, etc, so I thought that it will be a software problem. And nope. Today, I thought to the motherboard, then maybe the BIOS is bad?
Thinking about updating the BIOS on the HP support Web site I found that the version of BIOS is earlier than that of the PC (80.20 on pc, 80.08 on site)
It's really disturbing to me and I'm already very excited... All solutions will be very large
Anyway sorry for my bad English
Agskint, welcome to the forum.
This is not acceptable. I suggest that you take it back to the store where you bought it and have them repaired or replaced. You should not have this type of problem with a new computer.
Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.
-
KDL55HX800 turns off and back on again in standby mode every 15 seconds.
KDL55HX800 constantly turns off the coast and return to sleep every 15 seconds. Also, when I first turn on it will power itself and turn it back on. It is connected to the Internet and has the latest software update (PKG4.114AAT). Any help is appreciated.
I ask for the service... or by e-mail at sony support usa at [email protected] with all your details (series number, model, name of the contact info)
-
Computer tries to install the update, then turned off and restarts on & on
I was checking e-mail. Vista froze. I turned it off, waited a minute and he turned his back. The display shows "Installing Update 3/3. 0% complete "(ou quelque chose comme ça)." After a moment he said "shuttting down", then restarts on the same screen and stops again, etc.
I tried a beginning of safe mode, safe mode with network, known last good configuration and nothing makes this update screen go away.
To the best of my knowledge, I have NOT interrupted updates at any time.
Do NOT post more than one question about the same problem in these Forums!
One problem = a post is a single Forum. http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/cf8bb310-4FF5-4ee4-9368-f1b6cb6239c0
Answered in another Thread.
Mick Murphy - Microsoft partner
-
Mac Pro turns off and restarts
I have a Mac Pro 5.1. I recently installed a USB 3 card with Esata OWC. Occasionally, the system will restart now. Usually when I use DaVinci Resolve. My CPU is not overheating. I have too much on the PCI bus? It doesn't happen when I take out the card. Here is the crash report.
I have a GTX 970 installed with drivers from the web. (I already had an installed 570 and had the same problem)
I have a card from Blackmagic with SDI IO.
I have a concert PCI 480 OWC storage.
Thank you!
Crash report *.
Anonymous UUID: DF1900A6-AF49-B25B-F9F2-88B76B27064B SAM 7 May 20:10:24 2016
Panic report *.
panic (cpu 4 0xffffff80153ce40a appellant): Kernel trap at 0xffffff7f95b1f02e, type 14 = page fault, registers:
CR0: 0 X 0000000080010033, CR2: 0 X 0000000000000118, CR3: 0X000000064F043061 CR4: 0X00000000000226E0
RAX: 0X0001102DB7BBD3E9, RBX: 0 X 0000000000000000, RCX: 0X000000004CFE13E4 RDX: 0 X 0000000000011029
RER: 0XFFFFFF92E1E230D0, RBP: 0XFFFFFF92E1E230D0, IHR: 0X0001102DB7BBD3E9, RDI: 0 X 0000000000000000
R8: 0 X 0000000000000000, R9: 0 X 0000000000000000 R10: 0XFFFFFF8015A17278 R11: 0XFFFFFF80158B57E0
R12: 0XFFFFFF80417DC460, R13: 0XFFFFFF80440E8C60, R14: 0XFFFFFF80417DC400 R15: 0XFFFFFF80440E8C60
RFL: 0 X 0000000000010286, RIP: 0XFFFFFF7F95B1F02E, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010
Lack of CR2: 0 x 0000000000000118, error code: 0 x 0000000000000000, CPU error: 0 x 4, PL: 0
Backtrace (4 CPU), Frame: Return address
0xffffff92e1e22d60: 0xffffff80152dab12
0xffffff92e1e22de0: 0xffffff80153ce40a
0xffffff92e1e22fc0: 0xffffff80153ec273
0xffffff92e1e22fe0: 0xffffff7f95b1f02e
0xffffff92e1e230d0: 0xffffff7f95b1f54c
0xffffff92e1e23110: 0xffffff7f95b99267
0xffffff92e1e23130: 0xffffff7f95b1df90
0xffffff92e1e23170: 0xffffff7f95aed8dc
0xffffff92e1e231d0: 0xffffff7f95aedd59
0xffffff92e1e23200: 0xffffff7f9803b461
0xffffff92e1e23280: 0xffffff7f9803a7f5
0xffffff92e1e232e0: 0xffffff7f95a50b0b
0xffffff92e1e23330: 0xffffff7f95a532c4
0xffffff92e1e23390: 0xffffff7f95a58d7e
0xffffff92e1e23460: 0xffffff80155392e8
0xffffff92e1e234c0: 0xffffff80154deed8
0xffffff92e1e23610: 0xffffff80154ebea1
0xffffff92e1e237a0: 0xffffff80154eab39
0xffffff92e1e23870: 0xffffff80154f012d
0xffffff92e1e238e0: 0xffffff80154ee19e
0xffffff92e1e23a80: 0xffffff80154e94c2
0xffffff92e1e23d20: 0xffffff801571105c
0xffffff92e1e23db0: 0xffffff801551b4d0
0xffffff92e1e23e60: 0xffffff80157c64aa
0xffffff92e1e23f00: 0xffffff80157c661e
0xffffff92e1e23f60: 0xffffff8015827fa1
0xffffff92e1e23fb0: 0xffffff80153eca76
Extensions of core in backtrace: com.apple.iokit.IOStorageFamily (2.1) [DC1AAB7C-F417-3238-BB3F-2A5B84D67B90] @0xfff fff7f95a4c000-> 0xffffff7f95a72fff com.apple.iokit.IOSCSIArchitectureModelFamily (3.7.7) [2F5D538F9]@0xffffff7f95ae9000-07D953DC-7B94-3AE8-A379-2 b 0 > 0xffffff7f95b13fff com.apple.iokit.IOSCSIParallelFamily (3.0) [7C94C05D-4761-3D03-AB56-4CB7FCFA6039] @ 0xffffff7f95b1a000-> 0xffffff7f95b2bfff dependency: com.apple.iokit.IOSCSIArchitectureModelFamily (3.7.7) [02F5D538F9]@0xffffff7f95ae9000 07D953DC - 7 B 94-3AE8-A379-2 b com.newer - Tech.kext.mxpciel2esu3_usb (1.2) [95CD2269-3472-3679-A968-ACD2F24F8103] @ 0xffffff7f95b79000-> 0xffffff7f95badfff dependency: com.apple.iokit.IOSCSIParallelFamily (3.0.0) [7C94C05D-4761-3 D 03 - AB56 - 4CB7FCFA603 9]@0xffffff7f95b1a000 dependency: com.apple.iokit.IOPCIFamily (2.9) [4FE41F9B-2849-322A-BBF8-A94816C003D6] @ 7f95b2c000 0xffffff com.apple.iokit.IOSCSIBlockCommandsDevice (3.7.7) [CFF0A65E-BE53-3509-9 d 73 - DDFB57A 52F04]@0xffffff7f98039000-> 0xffffff7f9804ffff] dependency: ffff7f95a4c000 @0xff com.apple.iokit.IOStorageFamily (2.1) [DC1AAB7C-F417-3238-BB3F-2A5B84D67B90] dependency: com.apple.iokit.IOSCSIArchitectureModelFamily (3.7.7) [02F5D538F9]@0xffffff7f95ae9000 07D953DC - 7 B 94-3AE8-A379-2 b The process corresponding to the current thread BSD name: mds_stores
Boot args: nvda_drv = 1
Mac OS version:
15E65
Kernel version:
15.4.0 Darwin kernel version: Fri Feb 26 22:08:05 PST 2016; root:XNU-3248.40.184~3/RELEASE_X86_64
Kernel UUID: 4E7B4496-0B81-34E9-97AF-F316103B0839
Slide kernel: 0 x 0000000015000000 Text of core base: 0xffffff8015200000
Text __HIB base: 0xffffff8015100000
Name of system model: MacPro5, 1 (Mac-F221BEC8)
Availability of the system in nanoseconds: 299243519628898
last load kext to 299240993980004: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f98057000 size 32768)
Finally unloaded kext to 288317647533104: com.apple.driver.AppleHIDKeyboard 181 (addr 0xffffff7f98050000 size 28672)
kexts responsible:
com.nvidia.CUDA 1.1.0
com.nvidia.web.GeForceWeb 10.1.1
com.nvidia.web.NVDAGM100HalWeb 10.1.1
com.nvidia.web.NVDAResmanWeb 10.1.1
com Blackmagic - design.desktopvideo.iokit.driver 10.3.1
com Blackmagic - design.desktopvideo.iokit.framebufferdriver 10.3.1
com.newer - tech.kext.mxpciel2esu3_esata 1.2.0
com.newer - tech.kext.mxpciel2esu3_usb 1.2.0
com.newer - tech.kext.nwtmem 1.0.0
com Apple.filesystems.smbfs 3.0.0
com.apple.driver.AppleHWSensor 1.9.5d0
com Apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.70
com Apple.Driver.pmtelemetry 1
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.iokit.IOBluetoothSerialManager 4.4.4f4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 110.21.18
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleMCCSControl 1.2.13
com.apple.driver.AppleHDA 274.7
com.apple.driver.AppleMikeyDriver 274.7
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.4f4
com.apple.driver.AppleHV 1
com.apple.driver.AppleLPC 3.1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0
com.apple.iokit.SCSITaskUserClient 3.7.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0
com.apple.BootCache 38
com.apple.driver.AppleFWOHCI 5.5.2
2.8.5 com.apple.iokit.IOAHCIBlockStorage
com.apple.driver.Intel82574L 2.7.0b1
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleAHCIPort 3.1.8
com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1
com.apple.driver.usb.AppleUSBUHCIPCI 1.0.1
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 4.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 4.0
com.apple.driver.AppleAPIC 1.7
com Apple.NKE.applicationfirewall 163
com Apple.Security.Quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.driver.AppleXsanScheme 3
com.apple.driver.AppleHIDKeyboard 181
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7
com.apple.iokit.IOUSBMassStorageDriver 1.0.0
com Apple.kext.Triggers 1.0
com.apple.iokit.IOSurface 108.2.1
com.apple.driver.DspFuncLib 274.7
com.apple.kext.OSvKernDSPLib 525
com.apple.iokit.IOAcceleratorFamily2 205.3
com.apple.AppleGraphicsDeviceControl 3.12.6
com.apple.driver.AppleSMBusController 1.0.14d1
com.apple.driver.AppleSMBusPCI 1.0.14d1
com.apple.driver.CoreCaptureResponder 1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.4f4
com.apple.iokit.IOBluetoothFamily 4.4.4f4
com.apple.driver.AppleHDAController 274.7
com.apple.iokit.IOHDAFamily 274.7
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOAudioFamily 204.3
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOSerialFamily 11
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 6.0.0d7
com.apple.driver.AppleSMC 3.1.9
com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0
com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1
com Apple.Driver.USB.cdc 5.0.0
com.Apple.Driver.USB.Networking 5.0.0
com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1
com.apple.driver.usb.AppleUSBHub 1.0.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7
com.apple.iokit.IOBDStorageFamily 1.8
com.apple.iokit.IODVDStorageFamily 1.8
com.apple.iokit.IOCDStorageFamily 1.8
com.apple.driver.CoreStorage 517.20.1
com.apple.iokit.IOFireWireFamily 4.6.0
com.apple.iokit.IOAHCISerialATAPI 2.6.2
com.apple.iokit.IOSCSIParallelFamily 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7
com.apple.iokit.IO80211Family 1110.26
com.apple.iokit.IONetworkingFamily 3.2
com Apple.Driver.corecapture 1.0.4
com.apple.iokit.IOAHCIFamily 2.8.1
com.apple.driver.usb.AppleUSBUHCI 1.0.1
com.apple.driver.usb.AppleUSBEHCI 1.0.1
com.apple.iokit.IOUSBFamily 900.4.1
com.apple.iokit.IOUSBHostFamily 1.0.1
com.apple.driver.AppleUSBHostMergeProperties 1.0.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com Apple.Security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 417.2
com.apple.iokit.IOStorageFamily 2.1
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 4.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com Apple.KEC.pthread 1
com Apple.KEC.corecrypto 1.0
com.apple.kec.Libm 1
Model: MacPro5, 1, BootROM MP51.007F.B03, 6 6-Core processors Intel Xeon 3.33 GHz, 24GO, MSC 1.39f5
Graphics card: NVIDIA GeForce GTX 970, NVIDIA GeForce GTX 970, PCIe, 4 095 Mo
Memory module: DIMM 1, 8 GB, DDR3 ECC, 1066 MHz, 0x85F7, 0 x 463732314755363546393333334700520000
Memory module: DIMM 2, 8 GB, DDR3 ECC, 1066 MHz, 0x85F7, 0 x 463732314755363546393333334700520000
Memory module: DIMM 3, 8 GB, DDR3 ECC, 1066 MHz, 0x85F7, 0 x 463732314755363546393333334700520000
Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.4.4f4 17685, 3 services, 27 aircraft, 1 incoming serial ports
Service network: Ethernet 1, Ethernet, en0
Network service: Airport, AirPort, en2
Serial ATA Device: HL-DT-ST DVD - RW GH41N
Serial ATA Device: HL-DT-ST BD-RE BH12LS35
Serial ATA Device: OWC Mercury Electra 3G SSD, GB 960,2
Serial ATA Device: WDC WD20EARX-008FB0, 2 TB
Serial ATA Device: ST6000NM0024-1HT17Z, 6 TB
Serial ATA Device: WDC WD60EZRZ-00RWYB1, 6 TB
Serial ATA Device: WDC WD60EZRZ-00RWYB1, 6 TB
Serial ATA Device: OWC Mercury Accelsior PCIe SSD, 479,95 GB
Serial ATA Device: MARVELL VIRTUALL
SCSI device: Equipment of SCSI target @ 0
USB device: USB Bus
USB device: element-Tk
USB device: USB Bus
USB device: USB Bus
USB device: Hub BRCM2046
USB Device: USB Bluetooth host controller
USB device: USB Bus
USB device: USB Bus
USB device: USB Bus
USB device: USB 2.0 Bus
USB device: External USB 3.0
USB device: USB 2.0 Bus
USB device: Hub
USB device: USB OPTICAL MOUSE
USB device: Keyboard Hub
USB Device: Apple keyboard
USB device: Hub
FireWire devices: built-in_hub, up to 800 Mb/s
Crush Bus:
Well, the IO freezes, you know the combined power of PCIe cards?
- Global maximum 300W for all PCI Express slots
-
How can I solve this system start? Have you tried the F10 and F2 keys but to no avail.
Hi Wiild,
Follow these steps.
Press f8 before the Windows screen. Here, you will have a few options. You want to select the option that States disable reboot on system failure. This will allow an error code appears when the computer will restart. Let us know what is this error code.
I hope this helps! Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I do a lot of important writing, and it would be so much nicer if the icons of file would be left in the same positions on the desktop, so that when I started working I don't panic, thinking that some kind an important file has been lost. Please help me understand how to set up my office to keep my icons in place, if possible. Thank you!
Make sure the settings are as the other poster said.
This could happen if the Explorer doesn't correctly. The positions of icons are saved at the stop.
As an experience shutdown shut down Windows Explorer.
- Create and position a file on the desktop.
- Close Windows Explorer
- Start - All Programs - Accessories - right on command prompt and choose run as administrator.
- Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
- Press Ctrl + Alt + Delete then Task Manager.
- Control all processes to explore are closed. On the process tab see if Explorer is displayed.
Then to restart Explorer- Press Ctrl + Alt + Delete and choose Task Manager
- In the Task Manager, click the file menu and then click new task (run) and enter explorer
Is your file in the correct position?
General Explorer Fixs
To see if a fix is available
In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.
You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.
If the problem affects the control panel press Windows key + R and type wercon.
Close the browser and start a command prompt- Close Windows Explorer
- Start - All Programs - Accessories - right on command prompt and choose run as administrator.
- Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
- Press Ctrl + Alt + Delete then Task Manager.
- Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
Then to restart the Explorer after trying all of the following- Press Ctrl + Alt + Delete and choose Task Manager
- In the Task Manager, click the file menu and then click new task (run) and enter explorer
Reregister the shell registry entriesClose the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).regsvr32 /i shell32regsvr32 /i urlmon.dllregsvr32 RPCRT4.dll
regsvr32 PROPSYS.dll
regsvr32 MSCTF.dll
regsvr32 cscui.dll
regsvr32 rsaenh.dll
regsvr32 timedate.cpl
regsvr32 ATL DLL
regsvr32 OLEACC.dll
regsvr32 actxprxy.dll
regsvr32 USERENV.dll
regsvr32 msshsq.dll
regsvr32 NaturalLanguage6.dll
regsvr32 thumbcache.dll
regsvr32 WINTRUST.dll
regsvr32 MMDevAPI.DLL
regsvr32 audioses.dll
regsvr32 audioeng.dll
regsvr32 ExplorerFrame.dll
regsvr32 msi.dll
regsvr32 FirewallAPI.dll
regsvr32 netshell.dll
regsvr32 pnidui.dll
regsvr32 QUtil.dll
regsvr32 c:\windows\system32\wpdshserviceobj.dll
regsvr32 WINHTTP.dll
regsvr32 C:\windows\system32\qagent.dll
regsvr32 C:\windows\system32\portabledeviceapi.dll
regsvr32 wbemprox.dll
regsvr32 wbemsvc.dll
regsvr32 fastprox.dll
regsvr32 imapi2.dll
regsvr32 wshext.dll
regsvr32 gameux.dll
regsvr32 msxml6.dllregsvr32 vbscript.dll
regsvr32 jscript.dllregsvr32 wshext.dllregsvr32 wshom.ocxregsvr32 wshcon.dllregsvr32 scrrun.dllDelete folder settingsClose the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /fReg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /fReg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /fDelete the thumbnail and icon CachesClose the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).del "% userprofile%\AppData\Local\IconCache.db".del "% userprofile%\AppData\Local\*.db".A boot is a way to exploreIt can be caused by a shell extension.
The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.- Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
- Close Windows Explorer
- Start Autoruns by right-clicking and choose run as administrator
- Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
- Go to the Explorer tab and uncheck everything to the left.
- Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
- Press Ctrl + Alt + Delete and choose Task Manager.
- Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
- Click the file menu and then click new task (run) and enter explorer
and if it helps, re-enable one by one to identify the who.
-
Why zo my z3 suddenly closed, then restarts? I did it several times about 4-05:00 in the night. very disturbing!
Hi dandedoes,
Welcome to the community! Since you are new, please make sure that you have checked our Forum.
There are a number of factors that can cause the reboot, in many cases, a SIM card or an SD card may be the culprit. I suggest to remove the SIM card, but also any SD card and try to test to see if the problem persists.
This can also be related to third-party applications or applications that may have corrupted data. In this case remove them all the apps again would solve such a problem.
Finally, if none of the above works then software compensation would be the best option to run. See the instructions below on how to proceed.
- Before you start you need to download the PC Companion PC Companion software
and install it on your PC.
2 once installed on your PC, double click the PC Companion icon on your desktop to launch the update.
Note! For some models, you will be asked to do a backup before the update and then restore.
3 install and open PC Companion and select the area of support.
4 software update of the phone.
5. start.
6 repair phone
7 continue
8. accept the deletion of data
9. the next
10. wait to prepare
11. Select phone
12 follow the steps to connect
- Before you start you need to download the PC Companion PC Companion software
Maybe you are looking for
-
I just upgraded to el Capitan, but he did create a new profile and my existing profiles have disappeared. my files are all associated with my existing profiles. Help?
-
Portege Z930 - BIOS downgrade v2.30 to v2.20
I bought the Z930. Two days ago, I received an alert TEMPRO on an update of the BIOS.I downloaded the new BIOS zip file and installation. Then I got a message like this: BIOS version: Ver.2.30 current-> update Ver.2.20THIS Version: Current Ver.1.20->
-
Camera Samsung can print directly (USB) to 8500 a but not 8600?
Hi, I have a few Samsung SH100 with built-in Wifi and for months, we could actually print directly from the camera on our Officejet Pro 8500 has more printer only via wifi. In cases where we had to move the camera and the printer to a temporary loca
-
Automatic updates of Windows 7 will not end
My window 7 is not able to get updates because of a certain type of problem. At the stop, I see there are updates available and reday for install, it starts but never complete the update. Please let me know if there is a solution. Thank you * origina
-
Meals on D400 driver: Broadcom mini pci BCM94318
Latitude D400 Win XP sp3. My mini-pci wireless card appears to be dead. To replace the original card, I bought a Broadcom BCM94318 (model WL5011s (TECOM)) which has been listed as compatible in a D400. No driver of any material. My machine recogn