Ran repair and now recovery cannot find the OS to fix it.

Similar Questions

• Moved from Office Windows 7 from one room to the other and now it cannot find the wireless network

  Hello world

  I have a HP Pavilion running Windows 7.

  He was hooked through the ethernet in a single room.

  I moved it to another room where there was no inflexible access, so I relied on the use of our wireless network.

  Now, the computer will not even find the wireless network.  When I have the help, it says "no available connection."

  In the center of the network, selecting wireless has a red X to the left of the green signal bars.

  At first, I wondered if maybe the computer was in a "dead point" in our House, but I've put a laptop beside him and he found the thin wireless network.

  Any help?

  Update: I tried system restore and tried to stop/resume knowledge network locations, but to no avail.

  Here is the info on my card wireless directly from HP site:

  Original driver for the solutions of Dualband network Atheros 802.11 Wireless Module a/b/g/n.

  I found what I think, it's their website, (http://www.atheros.cz/atheros-wireless-drivers.php), but surprise... they only model # s, my info does not.  Ugh.

• I've upgraded to Firefox 9 beta and now it cannot find the printer. How can I print or can I roll back to 8 Firefox?

  I have two printers installed and they work very well with all programs except Firefox. I've recently updated to version 9 beta. I have that either must be able to print from Firefox or roll my version back to 8.

  Get Firefox 8 from here and you can install it on top of the current version, just download and run

  • getfirefox.com

• When I try to send an e-mail, a window appears and says that cannot find the pop3 host. What I have to change if I send an e-mail?

  When I try to send an e-mail, a window appears and says that cannot find the pop3 host. What I have to change if I send an e-mail?

  1. What email program are you using?
  2. Please post any error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread.

• Somehow my laptop screen started to display on the side... and I can't find the setting to fix it.

  original title: sort (my cat must have stepped on the keyboard) the screen of my laptop started to display on the side... and I can't find the setting to fix it. Help. Please,

  I have an old Toshiba (my other laptop is getting repair) is not my usual computer. I looked in the control panel and couldn't find an obvious place to change the settings, but it of really hard to pick up because at the top on the mouse pad is left on the screen and down is right and so on and so forth.

  I have an old Toshiba (my other laptop is getting repair) is not my usual computer. I looked in the control panel and couldn't find an obvious place to change the settings, but it of really hard to pick up because at the top on the mouse pad is left on the screen and down is right and so on and so forth.

  My screen sideway...

  Method 1:

  Press and HOLD on Ctrl + Alt keys > use the arrow keys (up, down, left, right) to realign the screen

  
  Second method:

  Right-click on the free space of the desktop > graphics > Rotation > try different degrees. Start by 90 degrees.

   

  Method 3:

  Do a system restore. Pick a date when the screen is in the normal position.

• OfficeJet 4500: Capture and scanning Hp cannot find the device

  I can print on my printer without a problem, but when I tried to run Capture and scanning HP, he invited to select a device and then could not find it. I even entered the IP address and it says that no device was found.

  When I ran everything in a remote printer, it says the printer status is unknown.

  I have something to him printed literally just 5 minutes before.

  Thanks for any info.

  Hi @gasman00,

  Thanks for the reply.

  If you want to use HP app scanning and Capture, you must upgrade to Windows 10. In addition, scan windows is also not compatible with Windows 8.1, so this will not work.

  You don't need or the other of these applications to analyze these are alternative methods of analysis.

  You have installed full feature software?

  If you do not have the use of the software installed HP the HP printer Install Wizard. The Wizard Installer HP printer detects automatically the best print available for your HP printer driver. It is only available for Windows 7, 8 and 10. Download and run The Installation Wizard for printer a free tool from HP. When you click this link, HP printer installation wizard is downloaded using the download of your Internet browser capabilities.

  Once installation is complete, try to scan using HP Scan by following the instructions from my first post.

   

• Removed the Trojan.Dropper.PE4 and now windows cannot display the firewall settings.

  XP SP3.  MalwareBytes removed Trojan.Dropper.PE4 today.  Now, "due to an unidentified problem, windows cannot display the firewall settings".  I've also scanned with SuperAntiSyware and Spybot.  Also, when I open Windows Explorer, Control Panel, etc. the display settings have changed.  Help, please.

  Hello
  Try the sequence of steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It provides simple instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.
  Brian

• Tried to send email with an attachment, error message says too big and to resize - cannot find the email to return it - look in all folders? He did 2 times - HELP!

  Gmail is my email address, but I use it through Windows Live Mail.  I tried to send this record twice and I lost the email twice.  I sent before and it went ok, but I wrote an e-mail longer and I think that is why it is said that it is too long. After the error message the email disappears.  I looked through all my files and I can't find it anywhere.  Y at - it anywhere else I can watch or go to find it?  Thanks for your help!

  It has not been sent, should it be in the Outbox.
   

• Downloaded Photoshop elements 13 since more than a year.  Just now trying to install and configure.  Cannot find the serial number and/or redemption code.

  Can someone help me find my serial number?

  See the link below:

  https://helpx.Adobe.com/x-productkb/global/find-your-serial-number.html

  If you have not registered the product under your Adobe account, you must contact Adobe technical support and may need to provide proof of purchase.

• I've just updated Firefox and now can't find the 'bar', 'back' and 'next' arrows and "bookmarks." Any suggestions?

  With earlier versions of Firefox, I got an address bar at the top of the screen where you can enter a URL. It does not appear now.

  With earlier versions of Firefox, I could go back to a previous URL by clicking on a «return» arrow Similarly, I could go to a most recent URL by clicking an arrow 'forward '. I don't see the arrows.

  With the latest versions of Firefox, I could click on "Favorites" at the top of the screen to see all my favorites. With the new version, I don't have a tab "Bookmarks". If I can I find it?

  Thank you all.

  You are welcome.

  If please, return to the forum and click on the button 'Resolved' next to the answer that solved your problem. Thank you.

• I just installed a new printer, but I am unable to print PDFs and Acrobat reader cannot find the printer?

  I have a HP laptop and you just install ADVENT printer.  I'm unable to print PDFs and Acrobat reader can not find computer.  I can print documents from word and excel to the printer.  I uninstalled and not reinstalled Acrobat reader but makes no difference

  Hi carolj90506119,

  Try the troubleshooting steps in this KB doc. https://helpx.Adobe.com/Acrobat/KB/troubleshoot-PDF-printing-Acrobat-Reader.html

  Kind regards
  Nicos

• My B8550 lights. I uninstalled and now can't find the disks to reinstall.

  I can't get my B8550 printer to turn on. I have checked all the connections, unplugged and reconnected, rebooted my computer (desktop, 64-bit, Windows 7) and it won't turn. I uninstalled it, thinking I had the disk to install it, but I'm not. How can I reinstall it and what could make it not turn on?

  Hey @sandyb1,.

  I understand that you are having problems with your Photosmart B8550 turn. I can help with that.

  First of all, we need to see if we can get the hardware of the printer.  This document will help you with your power problems. If you are able to turn on the printer, then you can download full feature software and drivers.

  If these steps allow you to turn on the printer and install the drivers please let me know and click on accept the Solution to let other users know that your problem is solved. If you are unable to turn on the printer, then it would be time to move to a newer model.

  If you have any other questions please let me know.

  I hope this helps and I hope you have a great weekend!

• Cannot find the shared library nilvaiu.dll and nican.dll.

  I'm using Labview 8.5.1 on windows XP 32-bit systems. Recently, I installed labview on a 64-bit XP system.  I feel what I think, problems of drivers on the 64-bit system, now. When executable files are run files are not: nilvaiu.dll and nican.dll.  Someone at - he lived these errors and now where to find the latest 64-bit drivers?

  Well, the list of drivers that are supported for XP 64-bit is quite short. And although NI-VISA, DAQmx and NI-CAN are not on this list, unfortunately.

• I turned off the toolbars with display - toolbars-(cliquez sur) and now cannot find the display menu to restore their! Duh.

  I turned off the toolbars with display - toolbars-(cliquez sur) and now cannot find the display menu to restore their! Duh.

  This has happened

  Each time Firefox opened

  Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.

• I have a PC brand new - HP and played Chess Titans. Now all of a sudden it says it cannot find the texture, but he said no zero the reference count and then could not find device 3D.

  original title: Chess Titans

  I have a PC brand new - HP and played Chess Titans.  Now all of a sudden it says it cannot find the texture, but he said no zero the reference count and then could not find device 3D.  What's past and how to fix this.  Thank you.

  These error messages can occur if you (or software) also disabled Aero. Aero must be on (and supported by the video card) to play Chess Titans. "192GO should be enough for everyone." (of the miniseries "Next generation jokes")