Random blue screen errors

Similar Questions

• stop random blue screen error DRIVER_IRQL_NOT_LESS_OR_EQUAL STOP: 0X000000D1

  original title: stop random screen w/blue

  I need help to solve this problem. My system will freeze and then randomly crash if I run games, programs or just sitting idle. I took the fan and blew out the dust, etc... and still no better. The info I get blue screen are:

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  STOP: 0X000000D1

  nvstor.sys - address 83F42395

  Any help would be appreciated to gratly.

  Hello

  Here is a version of Vista of the troubleshooter that Dena referred:

  =================================================================

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  -----------------------------------------------------------------------------------------------------------------

  Check with your manufacturer for newer drivers video card (special forces), known issues and
  other possible problems - check also the video card and game maker forums. It can even be
  a problem created by the interaction of two pilots (rather than the usual cause), perhaps the
  video driver and a swap file error and other causes work together to create the problem.

  ==============================================================

  Even if you have done some of these methods here is the complete troubleshooting tool while
  dealing with his need.

  Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
  methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
  programs may also cause this. Check the resolution of the problems and when you get to the pilot and sections tests memory refer to the generic methods in the next message and then returns to the resolution of problems
  If necessary.

  BCCode: D1 0x000000D1

  Cause

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

  This bug check is usually caused by drivers who used a wrong address.

  If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
  • The function call was made to a function in another pilot, and that this driver has been unloaded.
  • The function was called by using a function pointer that was an invalid pointer.

  BCCode: d1 0x000000d1<-- read="">
  * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
  are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly

  
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• [SOLVED] ATI HD series random blue screen error: error 0x0000007e ntoskrnl kb965494

  [Problems]

  Fixes random maps of BSOD blue screen of death ATI HD Series - spontaneous different random BSOD error codes every time

  Solves problems with his SoundBlaster X - FI (on board and add the map) extreme gamer - Sound sound seriously jerky or cut sharply off the coast

  Solves delays random system - system shuts down randomly for no apparent reason
  Solves the problems of disconnected Steam - quite noticeable in Call of Duty 4 Modern Warfare 2
  Resolved A of Call of Duty 4 Modern Warfare 2 in delays play random or falling of the game so that your game. Usually, when first start the game. Not having not NAT enable may cause a similar delay as well.
  [Source of problem]
  The problem is with an older driver a new loading equipment when you first load the operating system from Microsoft. Shame on you, Microsoft.  6 weeks to understand it and it is CLEARLY without Microsoft. Sorry, but none of the NDA here.
  Its a simple problem, yet almost impossible to find. Catalyst install Manager - ATI HDMI Audio Device will add an Audio device rather than to replace the device driver Audio HDMI Microsoft load the OS installation stage. Or the pilot is ignored all together because Microsoft has already loaded a driver installation for this device.
  [Clean Install FIX]
  When you install the ATI Catalyst 10.6, use the custom installation and exclude the HDMI Audio by unchecking the box next to the HDMI Audio. Pilots still end upward in the ATI Catalyst install directory if you can note the ATI installation path. The problem is that ATI will add an HDMI high definition audio device, DOES not replace the Windows device already loaded. Or may not charge a second device. Whatever it is, it uses the Microsoft device driver.
  Updated driver software with the driver - Microsoft high definition Audio Device driver ATI manually following the instructions below.
  [Windows OS already loaded FIX]
  -Device Manager-
  Manage driver updated using computer-> right click-> appliances-> sound-> right click HDMI high definition Audio Device-> update driver and browse to the directory of ATI (check include subfolders).
  Also noticed the BIOS default settings cause problems of NB and DRAM. Overclocked to mount pressure on the system. Even if I adjusted the settings of the BIOS, I have always many BSOD until I updated the driver for high definition Audio Device from Microsoft with the ATI driver.
  Ubuntu ran without a single question before changes to accommodate the Windows 7 operating system. For some reason any Windows is picky about certain parameters so that Ubuntu 10.04 LTS loads and runs without a single problem.
  I have the logs memory.dmp and mini.dmp. Any help and any help appreciated :D
  After running through the following steps, the problem here is the ntoskrnl.exe causing several bugs (BSODS). Even if it's a problem with Vista, this problem occurs with Windows 7.
  • Event ID: 1001 Source: error checking
    The computer was restarted after a bugcheck.  The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff88000e34294, 0xfffff880031bda18, 0xfffff880031bd280). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 052310-17316-01.

    The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000109 (0xb3b7465eeb217b7e, 0xfffff80002d18cc0, 0xa3a039d898a4a950, 0 x 0000000000000001). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 052110-23197-01.

  OS: Microsoft Windows 7 Ultimate 64 bit
  Antivirus: Microsoft Windows Security Essentials
  Motherboard: Gigabyte GA-890FXA-UD5
  RAM: 8 GB CORSAIR DDR3 4 GB 1333 MHz CORSAIR TW3X4G1333C9A TWIN

  Video: Diamond ATI Radeon HD5850 1 GB DDR5

  PROCESSOR: AMD X 4 965BE
  HD: Hitachi 1 TB HDE721010SLA330 S/N MS03G16K
  PS: Antec EarthWatt 750W PSU V2.3
  KB: Logitech G15
  Mouse: Razer Deathadder 3.5 G
  Gamepad: Belkin n52te
  First try to solve this problem:
  Fresh OS loaded and BSOD immediately after the restart. Reason or details is unknown because of the immediate reboot without a kernel image. No events logged in Windows event logs with error checking information.
  At ran Windows Update for the current patches. Random BSOD on restart.
  Load the ATI Catalyst 10.4 Suite for Windows 7 (64-bit). Random BSOD on restart.
  Problem again when the system is stopped and started. Chances are THAT BSOD will occur without emptying the core or the mini writing.
  Run the checker - 90% chance of BSOD
  Ran Check Disk - seems to be stuck on stage 4 'verification data file' 57531 63472 processed files. 01:05: PM 05/21/2010 FAIL stopped here 13:44

  Second attempt to solve this problem (low-level format):

  Using Hitachi tools - http://www.hitachigst.com/hdd/support/download.htm Drive Fitness Test - Switch BIOS from AHCI to IDE to access the SATA drive.
  Quick Test results - HDE721010SLA330 successfully completed / Disposition Code = 0x00
  Clear the result of the boot record - 0x00
  Wipe the drive (drive clean takes time for 1 to ~3.5 hours) / 17:07 Media Analysis / 20:20 hours of fact and change the outcome - success 0x00
  
  
  Updated the BIOS with F2 14/05/2010 (CPU compatibility improve)
  Press DELETE to enter BIOS F8 to enter the Q - Flash insert USB Thumb Drive (a drive if no floppy is in system) select the file
  Change the BIOS settings-
  Integrated Peripherals-
  OnChip SATA Type [Native IDE] change on [AHCI]
  (No Option for this) F6 for drivers to be loaded in Pre-os Windows 7 64 bit

  Install Windows 7 Ultimate 64 bit at 21:02 / Installer Reboot 21:14 / end of installation restart 21:18 / finalised result 21:21 - GOOD

  Install the driver USB 3.0 NEC 21:22 - result - GOOD
  Automatic update added KB978601 (pending reboot) and KB979309 - result - GOOD

  Install the network drivers Realtek Lan_win7 - result - GOOD

  Install win7_chipset (installed ATI Catalyst install manager 03.00.0765) 21:30 - result - BSOD KERNEL DUMP RENOWNED MEMORY. DPM at 5212010935PMMEMORY. DMP

  Hitachi configured disk requires reboot (stop for cold start) - 21:37 - result - connected

  Install Microsoft Windows Security Essentials 64 bits 21:43 d/l latest and scan / to 21:49 results - GOOD

  Shutdown - 21:51

  Power - result - GOOD

  Install ATI 10-4_vista64_win7_64_dd_ccc_wdm_enu (taken from the site of AMD ATI) start 21:59 / 22:01 need to restart (close) - result - GOOD

  Windows Installer wants to make changes - C:\window\SysWOW64\msiexec.exe/x {72736F5F-520 d - 472-A - 88 - 7 B 0 ERRRR it went away on its own.} Closing - 22:05 /qn REBOOT = really delete<---- came="" up="" again="" after="" cold="" start.="" think="" it="" had="" something="" to="" do="" with="" ati="" registration="" window.="">

  Install Google Chrome - result - GOOD

  Install Fusion - 2.0.1.117

  Install AMD OverDrive 3.2.1.0439 utility - Enable AMD Smart profiles -.

  Shutdown

  Power - result - GOOD

  Install the G15 - result - GOOD

  Install Windows Ventrilo 3.0.5 x 64-GOOD

  Install the Steam Client

  Install COD4MW2

  Change the settings to save energy for the computer to never sleep.
  22/05/2010
  Install gtalk, gApps
  Up to 08:57 05/22/2010 BSOD Mini dump.
  
  Dmp kernel that is renamed to 5222010857AMMEMORY. DMP

  BSOD more 2s on 2 days.

  Hello

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top two responses.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

  ===========================================

  The material is highly suspect!

  Since you reformatted and reloaded Windows this indicates that the problem is either material or a
  very basic pilot who has been reloaded - video/display, network/WiFi, sound, possibly 3rd party
  mouse or keyboard, BIOS, chipset and other low level drivers.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  ------------------------------------------------

  Even if you have some of these here tried a fairly complete convenience store just in case.

  BCCode: 7F 0x0000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in the directoryInc. of the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the/nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with theSwitch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x0000007E<-- read="">
  * 1141.html http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  -----------------------------------------------------

  BCCode: 109 0 x 00000109

  Cause

  There are generally three different causes for this bug check:

  1. A driver has deliberately or inadvertently modified kernel of criticism or data code. Microsoft Windows Server 2003 with Service Pack 1 (SP1) and later versions of Windows for computers x 64 do not allow the kernel to be debugged, except through authorized hot patches from Microsoft. For more information, see policy patch for x 64 systems.

  2. A developer tried to set a normal kernel breakpoint using a kernel debugger which was not attached when the system is started. Normal breakpoints (bp) can be defined only if the debugger is attached to the start time. Processor breakpoints (ba) can be defined at any time.

  3. A physical corruption has occurred. For example, the kernel code or data could are stored in memory has failed.

  BCCode: 109 0 x 00000109<-- read="">
  * 1262.html http://www.faultwire.com/solutions-fatal_error/modification-of-System-Code-or-a-Critical-Data-0x00000109-

  --------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Blue Screen errors and random crashes, please help!

  Hello, I built a computer about a month back, and now, whenever I try to play games and talk on Skype/teamspeak all crashes saying that nothing does, and when I try to open another program it crashes instantly and now I get random blue screens. Here's the code for the blue screen: STOP: 0X0000007E (0XFFFFFFFFC0000005, 0XFFFFF80002E9CBFI, 0XFFFFF880009A99D8, 0XFFFFF880009A9230) I look at the time and make sure that nothing is overheating, but it sews blue screen randomly, I tried to install windows debugging tool, so I can see the dump file, but whenever I try to install it, it says installation failed, it's my only computer, and I need it for school help Please.    Also, when I got this computer ready to go, I took the hard drive from my old computer and transferred the files and some games.

  System Specs:
  NZXT Guardian 921 RB black, blue LED
  Two Green Logisys sound active Cold Cathodes
  AMD Phenom II 970 x 4 3.5 Ghz
  Zalman CNPS9700 LED blue 110mm 2Ball CPU Cooler
  HIS Radeon HD 5670 Itceq
  OCZ ZS 750w ATX POWER supply
  ASUS M5A97
  8 gb Corsair Vengeance 240 pin 1600 mhz
  1 TB Seagate Barracuda 7200 RPM
  Windows 7 home 64-bit

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  I hope this helps. Good luck.

• I get the blue screen error - error - Stop 0X0000008E

  -Stop error 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000)

  Hi I get the blue screen error - error - Stop 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000) and cannot use the pc in safe mode. I have XP - OS. I really don't want to reformat the HARD drive and you want to avoid reinstalling as much as possible

  Hi aromaveda,

  ·         Have you made changes on the computer?

  Follow these methods.

  Method 1: Follow the steps in the article.

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

• Blue screen error crash, caused by drivers: ntoskrnl.exe, Wdf01000.sys and tcpip.sys

  original title: Blue error screen, accident of death caused by drivers: ntoskrnl.exe, Wdf01000.sys and tcpip.sys

  I currently own an Aura of Alienware Dell, it's an amazing computer. The only problem is that I had a lot of problems, I was able to permanently fix all except this issue. I'll randomly crash blue screen, usually it doesn't happen often and it is normally not triggered by something specific, rarely it will crash at startup. I was able to download an application that can read the cache/dump blue screen crashes:

  34 accidents

  one was caused by Wdf01000.sys

  three was a result of tcpip.sys

  and all the rest of ntoskrnl.exe

  I don't know what caused it, I've had this computer for about a year now and I've never had this problem before. I don't remember an update of the cause, or by downloading any strange apps, downloads or viruses. (I had wiped my computer about 3 months ago)

  I don't know too much about software,

  Any help is appreciated.

  Hi bloo532,

  1. what application did you use to read dump files?

  2. did you of recent changes on the computer?

  It resembles that of the driver on the computer is causing the blue screen.

  Check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Also make sure that all drivers are up to date on the computer.

  See the link below and try them the steps mentioned, check if it helps.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

   

  If the previous step fails, then you will need to provide the minidump files.

  Use SkyDrive download collected files and after shot/screenshot.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have problems with random blue screens - 1st BC Code - of the suggestions?

  I have problems with random blue screens - 1st BC code - all others are zeros.  6_1_7601 OS version, produced 768_1.  Any suggestions?  My computer is a model of HP P7-1235.

  Thank you.

  The minidump files showed two errors blue screen, an error KMODE_EXCEPTION_NOT_HANDLED (1e) referring to the amdxhc.sys and an error SYSTEM_SERVICE_EXCEPTION (3B) referring to the usbfilter.sys:

  Bugcheck 1E, {0, 0, 0, 0}

  WARNING: Unable to verify timestamp for amdxhc.sys
  ERROR: Module load completed but symbols can be loaded for amdxhc.sys

  Bugcheck 3B {c0000005, fffff8000f4770c5, fffff880085feb10, 0}

  WARNING: Unable to verify timestamp for usbfilter.sys
  ERROR: Module load completed but symbols can be loaded for usbfilter.sys

  The amdxhc.sys is the AMD USB 3.0 driver and the usbfilter.sys is the AMD USB filter driver.

  The amdxhc.sys is dated January 3, 2012 and the usbfilter.sys is dated November 16, 2011.

  Two of these drivers should be updated to the latest version to ensure compatibility with the motherboard and between them.

  HP has an available Update for AMD USB 3.0 driver but I do not see an AMD USB filter driver available for your computer updated.

  I might suggest to try to get the package of motherboard chipset from AMD for versions newer and compatible to the two pilots.

  You can try the "AMD Chipset drivers' starting from the following link which should update the two drivers.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  I recommend to create a System Restore Point before installing the new motherboard drivers.

• Designjet t125: designjet t125 blue screen error B332347C

  Hello.

  I was ask to get this error:

  When you feed the plotter that blue screen appears with this code: B332347C

  I can't find the service manual for this, if anyone can help me?

  HELO try this solution
  You need to replace hp designjet encrypted t520 chip on the motherboard inside the plotter
  You can buy it on ebay http://www.ebay.co.uk/itm/HP-Designjet-T520-Blue-Screen-Error-Solution-Encrypted-chip/282223353841

• Blue screen error on the Satellite A100 - 920 (PSAA9)

  Hello

  I got a blue screen error during use normal and after reboot, Windows suggested updated the BIOS, so I've updated with the latest version (5.10). The next day, I got another blue screen and reboot, Windows has suggested that I update my display drivers, I did (to Ver. 8.241)... I have an ATI Radeon X 1400 GPUS. After that, the computer crashed every time that it loaded windows, with a popup on services.exe telling me the computer shuts off in 60 seconds.

  I assumed that this was linked to the display driver, so I replaced the drivers with a version earlier than day (8.241 - 034065C). Once I did, it seemed to work and I could use the computer very well for a bit, even play games like GTA, but I'm starting to take again the blue screens, usually just at the opening of the files, etc. and not when you run graphical applications with a lot. The problem disappeared when I turn off my display drivers, but which is not really a solution.
  I disabled the reboot on the parameter of the error and it is information of the blue screen of death:
  STOP: 0X0000008E (0XC0000005, 0XEE6DF5E9, 0XBAD2F99C, 0X00000000)
  System32:huy32.sys - address EE6DF5E9 base at EE6DD000, Datestamp 45abe717

  Anyone have an idea how I can solve this problem, it makes me crazy!
  I downloaded the map Omega drivers, but am slow to install that I heard that they can cause overheating and I think ATI/Toshiba should be able to provide me with a solution without having to use third-party drivers myself.

  Hello

  One question: do you use Antivirus applications and you did update the Windows operating system?
  You said something about services.exe you indicating the computer turns off in 60 seconds.

  For me, this looks like a virus! I also google for system32:huy32.sys some people said it s a malware!
  I m not 100% sure, but maybe you have some virus you OS!

  Now to the question of pilot you: Yes, Toshiba recommend that you use a clean graphics drivers on the Toshiba site. The use of original graphics drivers on the Web site of graphics card manufacturer is not recommended.
  But I read a lot of thread on the omega drivers and many users using the drivers and they have no problems.

• Satellite A200 - blue screen error when you try to open HWSetup

  Hello

  I get a Windows blue screen error everytime I try to open HWSetup or access from Toshiba Flash card using the Fn key.

  Any ideas how to solve this problem?

  See you soon!

  Hello!

  Using Windows Vista?
  If so, you should try to update the Toshiba value added package and hardware configuration. The two you can find on the Toshiba site:

  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Blue screen error - recovery problem (STOP: 0 x 00008086)

  I am working on a Toshiba Satellite laptop and need to recover to original state. I have no recovery disks, however, I followed the Toshiba 'How' instructions (F8, and then select repair your computer), it displays the progress of Windows bar then goes to a black screen for a while and then I get a blue screen error (STOP: 0 x 00008086).

  Is there a way to get around this?

  N ° if drive HARD recovery cannot start on the regular basis there is no trick to make it work.

  To the factory settings, you need Toshiba DVD recovery.

• Get the blue screen error saying windows has shut down to prevent damage to this computer

  My sons computer is BLUE with a message saying that windows was arrested for not to damage your computer. And it is stuck on that screen. Do you know why windows shuts down his computer?

  * original title - my son computer is blue and a message indicating that windows has stopped to avoid damaging his computer. And he is not able to do anything. Do you know what it is? *

  Hello

  1. what operating system is installed on his computer?
  2 did you the hardware changes to his computer before the question?

  Perform the steps in the article and see if the problem is resolved or not.
   

  Resolve stop (blue screen) error in Windows 7

  Also check the event viewer for error logs

  Open event viewer

  What are the information contained in the logs of the event (Event Viewer)?

• Need solution for details of error below:-blue screen error BCCode 1000008e + BCP1:80000003 + BCP2:817855 A 8 + BCP3:8B9B9A54 + BCP4:00000000 + OS version: 6_0_6001

  get this problem in win 2 k 8 32-bit enterprose

  Need solution for the details of the error below: -.
  Blue screen error BCCode 1000008e + BCP1:80000003 + BCP2:817855 A 8 + BCP3:8B9B9A54 + BCP4:00000000 + OS version: 6_0_6001

  Hi SudhaArunachalam,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• blue screen error page "0x0000007E (0 x 0000005, 0x806E794F, 0xF7A45C30.). 0xF7A4592c).

  I get this error since the 22 and I ran across the typical procedures already (clean the temporary files and updates to the bios, etc.).
  I still keep getting a blue screen error page saying "0x0000007E (0 x 0000005, 0x806E794F, 0xF7A45C30.). 0xF7A4592c).

  The minidump files show a SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e) coherent don't stop error.with no third-party driver named as causing the crash.

  Here is a "Summary" of the accident:

  BUCKET_ID: 0x7E_nt! FsRtlRemovePerStreamContext+ 1

  Here's the "Stack_Text" which refers to the fltmgr.sys:

  STACK_TEXT:
  f7a4dcf4 804ed978 85fdba28 85e185cc 85fdba20 hal! ExAcquireFastMutex + 0xf
  f7a4dd08 f7458b6c e2fa9b30 85e18370 e2fa9b30 nt! FsRtlRemovePerStreamContext + 0x1e
  f7a4dd34 f745a0ba 85e18370 86873be8 85e254c8 fltmgr! FltpDeleteAllStreamListCtrls + 0 x 62
  f7a4dd50 f744c8f7 85e183f4 86873be8 00000008 fltmgr! FltpFreeVolume + 0xa4
  f7a4dd68 f745064e 85e254c8 00000008 8056485c fltmgr! FltpCleanupDeviceObject + 0x61
  f7a4dd7c 805387cb 86873be8 86dc2b30 00000000 fltmgr! FltpFastIoDetachDeviceWorker + 0x14
  f7a4ddac 805cffa8 86873be8 00000000 00000000 nt! ExpWorkerThread + 0xef
  f7a4dddc 8054615e 805386dc 00000000 00000001 nt! PspSystemThreadStartup + 0 x 34
  00000000 00000000 00000000 00000000 00000000 nt! KiThreadStartup + 0x16

  It is very similar to the error reported in the following link where "Drive Letter Access" seems to be the issue.

  http://Forum.sysinternals.com/BSOD-7E-Driver-Verifier-problems_topic18148_page1.html

  Since you also have Sonic Drive Letter Access installed you can try to uninstall this software and see if the problem resolves.

• Blue screen error: 0 x 00000024

  Hello

  I have a blue screen error: 0 x 00000024. I'm just now initialized in Ubuntu. I need to save my pictures and everything. I also need to keep the operating system. Is their anyway I can do this without spending a lot of money? He just did this in the middle of the night.  Help, please.

  Thank you

  Hello weatherman13,

  At this point, it seems that the reader on it, errors that are unrecoverable.  I agree with JoseIbarra and Gerry CJ Cornell - If CHKDSK cannot recover these errors, so we must concentrate on the recovery of data.

  It sounds as if you were able to connect the hard drive to another computer to get the data.  If this is correct, the piece of data recovery is complete.

  Because CHKDSK will not recover errors, our last step is to contact Dell and ask them to help you in running the diagnostics on this drive.  The drive must be formatted and reinstalled Windows XP or the hard drive will need to be replaced.

  Let us know if this is correct or if you have any questions.

  Best regards

  Matthew_Ha