Random BSOD and I do not know why.__Unable to load the image \SystemRoot\system32\ntoskrnl.exe, 0n2 error Win32

I don't know why this is happening, but I'm getting random BSOD now and then. I tried to point out my system to see if it generates a BSOD, but multitasking 3d and photoshop programs and what's not stress, then when I least expect, BANG! BSOD.
The last of them, that I had now was in the middle of the night with almost no programs running. The system had worked for some time (one or two days), but nothing was he pointing out at the same time.

What I think happened was: our microwave shorted out and caused a fuse to blow. But it was on another grid in our House (I hope I make myself clear, because I'm not used to talk about stuff like this in English!) so it should not affect my computer. But at the same time my microwave said "Thank you for everything!" my computer would BSOD. The thing is that my modem, my switch, my router and my NAS is connected to the electric network and my short circuted of switch. And my computer is connected to the switch cable.
This effect possible that excess tension (or something) has short circuted my switch and 'jumped' power to the switch and on the cable and sending there is a shock to my computer? Or am I just paranoid? Laughing out loud

I know that the controllers are pushed to the limit of the memory and therefor tolerate very little when it comes to electricity. I ran MemTest4.00 14 passes but I came with nothing. But memtest that tests memory, not the controllers, right? I am watching a fried motherboard?

I did a windb, but I don't understand what he says. Could someone please translate this for me and give me your opinion?
In addition, when you run windb, it's tell me am I wrong symbols. -What this means, and where can I get the symbols he wants? And what symbols?

Microsoft (R) Windows debug 6.12.0002.633 AMD64 Version
Copyright (c) Microsoft Corporation. All rights reserved.

Loading dump file [C:\Windows\Minidump\Mini042910-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are available

Symbol search path is: * invalid *.
****************************************************************************
* Loading of the symbol may be unreliable without a symbol search path.           *
* Use .symfix to get the debugger to choose a symbol path.                   *
* After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols cannot be loaded because the path is not initialized. *
*                                                                   *
* The symbol path can be defined: *.
* using the _NT_SYMBOL_PATH environment variable.                 *
* with the help of the there when you start the debugger argument. *.
* using the .sympath and .sympath + *.
*********************************************************************
Cannot load the image \SystemRoot\system32\ntoskrnl.exe, 0n2 error Win32
WARNING: Unable to verify timestamp for ntoskrnl.exe
ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (4 procs) free x 64
Product: WinNt, suite: TerminalServer SingleUserTS
Computer name:
Kernel base = 0xfffff800 '02c4c000 PsLoadedModuleList = 0xfffff800' 02e10dd0
The debugging session: 23:43:16.368 Thursday, April 29, 2010 (UTC + 02:00)
System Uptime: 3 days 5:21:50.657
*********************************************************************
* Symbols cannot be loaded because the path is not initialized. *
*                                                                   *
* The symbol path can be defined: *.

* using the _NT_SYMBOL_PATH environment variable.                 *
* with the help of the there when you start the debugger argument. *.
* using the .sympath and .sympath + *.

*********************************************************************
Cannot load the image \SystemRoot\system32\ntoskrnl.exe, 0n2 error Win32
WARNING: Unable to verify timestamp for ntoskrnl.exe
ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
Loading the kernel symbols
...............................................................
................................................................
................................................
Loading user symbols
Loading unloaded module list
......
*******************************************************************************
*                                                                             *
* Bugcheck analysis *.
*                                                                             *
*******************************************************************************

Use! analyze - v to obtain detailed debugging information.

Bugcheck A, {fffffa7fffffffea, 2, 0, fffff80002c5a95c}

The kernel symbols are FALSE. Correct symbols to do the analysis.

*************************************************************************
***                                                                   ***
***                                                                   ***
Your debugger is not using the appropriate symbols *.
***                                                                   ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete.      ***
***                                                                   ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information.  The contact group that *.
you provided with these symbols, if you need this command for *.
work.                                                          ***
***                                                                   ***
Type referenced: nt! _KPRCB *.
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
Your debugger is not using the appropriate symbols *.
***                                                                   ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete.      ***
***                                                                   ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information.  The contact group that *.
you provided with these symbols, if you need this command for *.
work.                                                          ***
***                                                                   ***
Type referenced: nt! _KPRCB *.
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
Your debugger is not using the appropriate symbols *.
***                                                                   ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete.      ***
***                                                                   ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information.  The contact group that *.
you provided with these symbols, if you need this command for *.
work.                                                          ***
***                                                                   ***
Type referenced: nt! _KPRCB *.
***                                                                   ***
*************************************************************************
Probably caused by: ntoskrnl.exe (nt + e95c)

Follow-up: MachineOwner
---------

0: kd >! analyze - v
*******************************************************************************
*                                                                             *
* Bugcheck analysis *.
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access an address pageable (or completely invalid) to a
application interrupt level (IRQL) that is too high.  It is usually
caused by drivers using a wrong address.
If a kernel debugger is available, download the stack trace.
Arguments:
Arg1: fffffa7fffffffea, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bit field:
bit 0: value 0 = read operation, 1 = write operation
bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
Arg4: fffff80002c5a95c, address memory

Debugging information:
------------------

The kernel symbols are FALSE. Correct symbols to do the analysis.

*************************************************************************
***                                                                   ***
***                                                                   ***
Your debugger is not using the appropriate symbols *.
***                                                                   ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete.      ***
***                                                                   ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information.  The contact group that *.
you provided with these symbols, if you need this command for *.
work.                                                          ***
***                                                                   ***
Type referenced: nt! _KPRCB *.
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
Your debugger is not using the appropriate symbols *.
***                                                                   ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete.      ***
***                                                                   ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information.  The contact group that *.
you provided with these symbols, if you need this command for *.
work.                                                          ***
***                                                                   ***
Type referenced: nt! _KPRCB *.
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
Your debugger is not using the appropriate symbols *.
***                                                                   ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete.      ***
***                                                                   ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information.  The contact group that *.
you provided with these symbols, if you need this command for *.
work.                                                          ***
***                                                                   ***
Type referenced: nt! _KPRCB *.
***                                                                   ***
*************************************************************************

ADDITIONAL_DEBUG_TEXT:
Use '! findthebuild' command to search for the generation of target information.
If the build information is available, run '! findthebuild s; .reload ' to set the symbol path and of loading symbols.

MODULE_NAME: nt

FAULTING_MODULE: fffff80002c4c000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 4b7d238f

READ_ADDRESS: could not get nt! MmSpecialPoolStart
Unable to get nt! MmSpecialPoolEnd
Unable to get nt! MmPoolCodeStart
Unable to get nt! MmPoolCodeEnd
fffffa7fffffffea

CURRENT_IRQL: 0

FAULTING_IP:
NT + e95c
fffff800'02c5a95c?              ???

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0XA

LAST_CONTROL_TRANSFER: from fffff80002ca626e to fffff80002ca64d0

STACK_TEXT:
fffffa60 '01bde688 fffff800' 02ca626e: 00000000' 0000000 a fffffa7f ' ffffffea 00000000'00000002 00000000'00000000: nt + 0x5a4d0
fffffa60 '01bde690 00000000' 0000000-a: fffffa7f 'ffffffea 00000000'00000002 00000000'00000000 fffff800' 02c5a95c: nt + 0x5a26e
fffffa60 '01bde698 fffffa7f' ffffffea: 00000000'00000002 00000000'00000000 fffff800 '02c5a95c fffffa60' 04dbf8b0: 0xa
fffffa60 '01bde6a0 00000000' 00000002: 00000000 00000000' fffff800 '02c5a95c fffffa60' 04dbf8b0 00000000' 00000000: 0xfffffa7f'ffffffea
fffffa60'01bde6a8 00000000' 00000000: fffff800 '02c5a95c fffffa60' 04dbf8b0 00000000'00000000 00000000'00000000: 0 x 2

STACK_COMMAND: .bugcheck; Ko

FOLLOWUP_IP:
NT + e95c
fffff800'02c5a95c?              ???

SYMBOL_NAME: nt + e95c

FOLLOWUP_NAME: MachineOwner

Nom_image: ntoskrnl.exe

BUCKET_ID: WRONG_SYMBOLS

Follow-up: MachineOwner
---------

I'm grateful for any help I can get in that case.

My system is: AMD 9950BE CPU, motherboard ASUS Crosshair II Formula, 4 x 2 giga OCZ 1066 mhz memory, Vista Ultimate 64 bit, ASUS 295GTX GPU

Postal salvation,

I think you're in luck. It chances are you are one of those rare cases where the BSOD may not be hardware related. In addition, it is actually pretty rare to have so many errors after a sfc... Wow. I think that alone has helped reduce the risk of an another BSOD and was good insurance against other problems.

Do you have a chance to check the hard drive? Now, I would like to check the hard drive to see if there may be potential damage to the hard drive as well to help explain this number of errors (return to the material again).

Here's how to new:

http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

I think that advice on the anti-virus scanning are also actually still relevant today. I have a scan of one of the two groups below as soon as you can and let us know the result if you can.

virus/malware programs:

Symantec:

Works in Safe Mode and free:

_ http://security.symantec.com/sscv6/WelcomePage.asp

Trend Micro

_ http://housecall.trendmicro.com/

Ad-ware/spyware:

Ad-aware

http://www.lavasoftusa.com/

Spybot Search and Destroy

http://www.safer-networking.org/

* It is an excellent versatile tool as it will both spyware and malware and has also a small footprint.

See you soon,.

Steve <> Microsoft Partner

Tags: Windows

Similar Questions

  • I know there is a new version of Premiere Pro for creative cloud but does not update my version of Premiere Pro and I do not know why.

    I need to be able to change work and home, that was child's play in our world of Adobe Creative Cloud. However my work got the 2015 version updated to CC and for some reason any my CC at home will not be updated and I don't know why.

    In addition to the answer to the question of the Peru Bob (who we users need to help!) ... There are a few things I could suggest/request...

    (1) what are the specific numbers of your applications to the studio & home? Last build is 2015.0.2, construction 9.0.2(4).

    (2) disconnect from your Cloud creative desktop app, then reconnect. Sometimes this resolves this issue. Give it a whirl...

    If 2) does not work, you may need to use the soft Cleaner CC Adobe to uninstall Desktop CC and PrPro and download & launch of office, then the application download & install PrPro & update.

    Neil

  • I've recently updated the browser and it shows the great fountain and page do not know why?

    I have download and update my Firefox browser on both computers (22.0). It has change my length and the width of the page, also the police, I tried to change the size and the view option, but it didn't for me. Does anyone have any tips for me to return to my default configuration?

    Hello

    Firefox on Windows is now after display, scaling options that can make the biggest text on screens at high resolution. There are several ways to solve this problem. See the Web pages are broad and fuzzy after update of Firefox - how to fix article for a suggestion. Here is another possible solution:

    • Type of topic: config in the Firefox address bar and hit the Enter key.
    • If the warning that this might void your warranty , click I'll be careful, I promised.
    • Search for layout.css.devPixelsPerPx

    • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

    If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

    If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

    To adjust the font size for the user interface, you can use the extension of theme font & size changer .

    This solve your problems? Please report to us!

    Thank you.

  • I decided to do a clean install of windows 7, but when the disc it stops to extend windows files 0% I do not know why this happens is the drive.

    Original title: Windows 64-bit clean

    Ive recently done my 2nd attempt to install windows 7 64 bit and ive met the same problem, I have formatted and deleted all the data ln my drive hard amd decided to do a clean install of windows, but when the disc it stops expanding windows files 0% I don't know why this is happening is the disc

    You have all the features non-essential connected to the computer during installation? If you have external storage media connected, disconnect them.

    It is also possible to reinstall your Windows 7 media is corrupt. You can try to download a new copy and try again.

    How to: What are my options for Windows 7 reinstall media?

  • I want to connect to a Canon MG5320 printer to my new PC which has Windows 8 and I do not know how... The new computer is a HP Pavilion p6 - 2316 s PC Help!

    I don't know how to install a printer on my new PC.  The printer is a Canon MG5320, who is a year and work well with my computer discarded.  Now I have a new HP Pavilion p6 PC - 2316 s and I can not print from it until it is installed. The printer is on and ready, but does not appear on my computer screen as it did on the old computer...  Help!

    [Moved from comments]

    Hi Aggietol,

    1. Visit the website of Canon Pixma MG5320 & driver software
    2. Select the operating system ==> Windows
    3. Select the Version of the OS ==> 'Windows 8' If you have a 32-bit version of Windows 'Windows 8 (x 64)' otherwise
    4. Click on the arrow of drivers
    5. If your printer is connected directly to your PC, select "MG5300 series MP Driver worm." 1.00 has (8/8 windows... «. If it is connected through your local network, select "MG5300 Series Mini Master of installation (Windows 8/8 x 6..."
    6. ...

    Hope this helps at & answers your question.

    See you soon

    LZ.

  • Conditional display - obviously does not work and I do not know why!

    I have a few buttons and conditional display makes me mental

    I put a very simple condition in as value of element in the expression 1 = zero

    then, in the expression 1 set P82_DUPLICATE

    then run the P82_DUPLICATE page element is clearly 0 and the button does not appear

    Help me!! its driving me crazy

    Thank you very much

    Chris

    Chris

    At the bottom of the page when logged in as a developer, you should have a number of links which is 'Session' - this will display a pop-up of the current values of the items in session state.

    If the page is not submitted then the value may still not there. If you need to dynamically work without submitting the page then you will need to use AJAX.

    Please check it for me and I should be able to help.

    See you soon

    Ben

  • How can I reset the permission to receive downloaded programs? This authorization has changed and I don't know why. I am the owner and the only user of this computer.

    After a long work, I learned that I'm unable to download programs such as Adobe Flash and Microsoft Security Scan.  In fact, they do not enter the folder C:\USERS\CLAUDE\DOWNLOADS\---mais they may not be recognized by the operating system (SYS 7) because for some reason any access is denied.  I looked at the book and find that Claude file is locked.  I don't know how it happened.  I tried to see how to unlock but again without success.  Can you help me?

    Thank you

    Hi Claude1112,

    Looks like you can't access the download folder. I'll help you with this problem.

    1. have you made changes on the computer recently?

    2. what security software is installed on the computer?

    3. have logged as administrator?

    Method 1.

    Start the computer in safe mode and check if you can access the downloads folder.

    Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

    If the problem does not occur in safe mode, then proceed to clean boot state.

    A clean boot to test if any element of service or third party application startup is causing this issue.

    How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

    Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

    Method 2.

    You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

     

    Method 3.

    I would like to create a new user account and check if the problem still persists.

    Create a user account: http://windows.microsoft.com/en-IN/windows7/Create-a-user-account

    If the problem does not occur in the new user account, you can transfer the files from the damaged to the new user account by using the article user account "difficulty a user profile is corrupted.

    Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    I hope this helps.

  • I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok

    I had some trobele with my computer and had to take it when I got it. The firewall was working fine. I do not know

    If you date something on it so that it remains not.

    I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok

    Hey Roscoe,

    If you're still using MSE, I doubt there's this problem.  This made a few changes to the Windows Firewall during installation (if necessary), but certainly nothing that would cause it to turn on and off like that.  It could be malware (malware can cause anything), but frankly more sounds like a file systems or corruption or some type of problem with your Windows Firewall or security setting or your operating system in a more general sense rather than the malicious software.  I will refer you to experts who specialize in this kind of thing, but if they tell you it's a malware problem, then come back here and we will be happy to help you solve it.

    For that matter as described, please post here to get the best advice from specialists in this: http://answers.microsoft.com/en-us/windows/forum/security?tab=all which will be more than happy to help you.  You will probably need to uninstall the other firewall you have installed so they can diagnose the problem properly and without hindrance (not just disable it, but completely uninstall to be sure) - but they can tell you more on this subject.  Don't forget up next to the Windows Version to use the dropmenu to choose your version if you find yourself in the most appropriate forum for your system.

    I hope this helps.

    Good luck!

  • I have download the cc in lightroom and it give me some indication to date but I can't open. I do not know why, please help

    I have download the cc in lightroom and it give me some indication to date but I can't open. I do not know why, please help

    Hello w,

    You can follow the article: connect, disconnect you and | Creative desktop application Cloud disconnect and reconnect back to creative cloud and try to launch your Lightroom 2015 application.

    Let us know if it works or not.

    Thank you

    Yann Arora

  • Does not work and do not know why

    Just installed the CLI and pulled up, went to run the cmdlet connect-viserver and it is not working and I don't know why? The system is Win7 x 32.

    C:\Program VMware vSphere CLI & gt; connect-viserver

    'connect-viserver' is not recognized as an internal or external command

    operable program or batch file.

    VCP, NT4/W2k/W2k3 MCSE, MCSA W2k3

    The cmdlet connect-viserver is part of PowerCLI and is not part of the vCLI.  With the vCLI you can specific to the host to connect to when you run a command.

    Dave

    VMware communities user moderator

    Now available - vSphere Quick Start Guide

    You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

  • My cd dvd drivers are no longer there and I don't know why

    My cd dvd drivers ae either and I don't know why.  I came back to the system restore and still does not. Why?

    Hello

    1. what operating system is installed on your system?

    2. you remember to change the system before the problem occurred?

    Try the method provided below and check if they help to resolve the issue.

    Method 1:

    If the CD/DVD drive is not able to read or write the data, then you can go to the link below and run the hotfix that should help resolve problems with CD/DVD player.

    Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  • One of my subfolders of Outlook Express disappeared, and I don't know why. What can I do?

    : One of my subfolders disappeared, and I don't know why. What can I do?

    Have you checked the deleted items? This is where he would go first.
     
    Check the Recycle Bin and the storage folder of OE for a .bak for the missing folder file. Post back before trying to restore.
     
    Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
     
    In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
  • Windows updates is disabled and I don't know why. I suspect that McAfee.

    original title: automatic updates

    Have Windows XP. Have McAfee. Windows automatic updates is disabled. Do not know why. Have tried everything turning. Any ideas?

    Go to control panel and click on Administrative Tools

    Now, double-click Services and find automatic updates.

    Make sure that the status is (road) and the Startup Type is (automatic). If this isn't the case, then double-click on and difficulty.

    Good luck

  • Can I connect my android for my PC in windows phone 7, but not to those at work. Scientists do not know why!

    Can I connect my android for my PC in windows phone 7, but not to those at work. Scientists do not know why!

    I am trying to connect to a machine newly built W7 who has free access to the internet and from the guys in IT is not locked down. But there is clearly something different from my home machine. Both are Windows 7 Ultimate on a home group, not to a domain.

    I use an adapter Bluetooth USB 4 and can sucessfully pair my phone to work, but my application (remote Unified) says "connection refused".

    I tried to disable the firewall and looked at all the parameters that I can find.

    I went through the windows wizards advocatus - all of this without any problem.

    I'm looking to help him find the source of the issue of refusal of connection.

    Hi Gutzy,

    Thanks for posting your query on the Microsoft Community.

    If I understand correctly, you have 2 computers that have all two windows 7 Ultimate installed on them and the two are not on the field. The PC that is at home works well, when you try to connect to your phone by using unified remote right?  You can pair your phone with Bluetooth, 4 USB adapt to the work, but you are unable to take control remotely using Remote unified.

    It shows that it might be the security settings of the computer at work. Would be better to answer this question in the Technet Forums. Please send the query in the link below.

    https://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itprogeneral&filter=AllTypes&brandIgnore=true&sort=relevancedesc&filter=AllTypes&searchTerm=unable+to+connect+Android+phone+to+Windows+7

    It will be useful. If you encounter problems with windows in the future, please contact us.

  • my computer laptop bluetooth was working but suddenly it stopped and I don't know why... How can I make it work again please!

    Original title: quick help please :/

    my computer laptop bluetooth was working but suddenly it stopped and I don't know why... How can I make it work again please!

    Hello

    Hardware devices not detected or does not work - a Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Add a BlueTooth device to your computer
    http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

    Set up a Bluetooth compatible device
    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

    The problems with Bluetooth devices
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

    How to set up a Bluetooth connection
    http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

    The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
    as expected when you click on the element - for Windows 7 this check manually
    http://support.Microsoft.com/kb/960531/en-us

    If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

    BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
    devices around you. For each detected Bluetooth device, it displays the following information:
    The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
    Last detection time and more. BluetoothView can also warn when a new Bluetooth device
    is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
    http://www.NirSoft.NET/utils/bluetooth_viewer.html

    BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
    the standard output. For each Bluetooth device, the following information is displayed: MAC
    Address, name, Major Device Type, minor device Type and possibly the name of the company of
    the device (if the external file of MAC addresses - oui.txt is provided) - FREE
    http://www.NirSoft.NET/utils/bluetoothcl.html

    BluetoothLogView is a small utility that monitors the activity of Bluetooth devices around you,
    and shows a log of Bluetooth devices in the main window. Each time that a new Bluetooth
    device coming to your area and when the unit comes out of your area, a new journal line is added with
    the following information: device name, time of the event, address, Type of event ("peripheral
    Arrival' or 'Device left'), Type of aircraft and the company that created the device. BluetoothLog-
    View you can also specify a description for each device (according to its MAC address)
    that appears in the column "Description". -FREE
    http://www.NirSoft.NET/utils/bluetooth_log_view.html

    ---------------------------------------------------------------------

    Change settings for a Bluetooth compatible device
    http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

    Add a Bluetooth device to your computer
    http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

    Add a Bluetooth device or other wireless or network device: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

    ---------------------------------------------------------------------

    More information of possible interest to some:

    What is a Bluetooth personal area network (PAN) network?
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

    Connect to a Bluetooth personal area network (PAN) network
    http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Maybe you are looking for

  • On Satellite Pro C50-A-1HP keyboard problems

    I have seen other issues of keyboard on the thread, but none of them do not seem to match mine! I got this computer since January and already have problems with the keyboard. The main problem is the left arrow key - it works when I press on the left

  • Toshiba 46TL938 - video stops always at 2 h 6 min

    HI, I have some problems with 46TL938, the version of the firmware 7.0.21.6.1 Sep 13, 2012 - 65.8.19.3, MBOOT version 00646225 1. all mp4 (ie. x 264 codec) files are stopped at 02:06:27 when played by USB or network server. I tried different videos,

  • HP pro 3400 and hd 7970

    Hello, all! Is it possible to install the hd7970 on HP 3400 Pro video card? Card mother Foxconn 2ABF, BIOS has been updated to the latest version (7.16). Try to install the video card. Connect the power supply to it. System does not boot. Black scree

  • computer crashed after the automatic update Tuesday night

    Hi, Kevin My computer crashed after the automatic update Tuesday evening. The message indicates that the demand for window vista (which initially provided with the Lenovo computer, that I bought new in 2007) is not valid. When I rebooted and you pres

  • The Officejet 4500 wireless printer can work wireless with a Wireless N Router?

    My Officejet 4500 Wireless printer worked fine with my router wireless of the B of aging, but when the latter died, I replaced it with a Wireless N router, the 4500 is possible to work with the N Wireless neworking Protocol?  Thanks for your help.