Random disconnection on Atheros AR9002WB-1NG Wireless Network Adapter

Similar Questions

• My laptop cannot connect to the internet with the error (code 31) Qualcomm Atheros AR9485WB-EG Wireless Network Adapter

  Hi, my laptop have this problem cannot connect to the internet, but the bar shows that I am connected to the network, but without access to the internet.

  I tried someone's guide to uninstall the network adapter in Device Manager and then reinstall it again, but now I'm stuck with the laptop cannot even detect the wireless network and the "Qualcomm Atheros AR9485WB-EG Wireless Network Adapter ' on Device Manager displays this message"the device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

  I forgot since when this problem persists.

  Please help me with this problem of internet connection,

  List of maybe / don't may not be the problem:

  1. I had mcafee antivirus 3 weeks around which has already expired for about 50 days and I uninstalled to turn into kaspersky anti-virus

  2. my windows is still 8.0

  3 ASUS N56V

  4. browser chrome incognito window

  Thank you Mr President, I found a solution for this problem

  I just turn on the download via connections counters my PC-> devices config->download via connections counters

  and then I tried to enter the following command at the command prompt run as administrator

  netsh int ip reset c:\resetlog.txt

  I hope this helps anyone else having the same problem as mine

  Thank you again Sir

• Atheros AR5BWB222 MISSING wireless network adapter

  I had to reinstall windows after a crash.  When I upgraded to Windows 10, I lost the

  Atheros AR5BWB222 wireless network adapter %. I went back to windows 8 and it wasmissing it too?  Where can I get this driver wihout pay $100?

  The link I provide downloads the drivers on the Acer support site. It does not work when you clicked on my link?

• Problems with drivers for Atheros Communications AR9565 Wireless Network Adapter

  I recently downgraded my HP Pavilion windows 8 to 7 14b130ej. I can't find the drivers for the network adapters. I'd appreciate any help in this matter. Thank you very much!

  Hello:

  You need these drivers if you have a wireless atheros network card...

  Wireless:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_128686_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Bluetooth:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_126765_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Help, please! Atheros AR9002WB-1NG network adapter... Details of the pilot show drivers are digitally signed by Microsoft, BUT?

  The message below appears when I click on properties in the AR9002WB-1NG Atheros network card device manager:

  "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

  BUT under the 'driver '... 'Détails' show ' drivers are digitally signed by Microsoft!

  I have received responses on this issue, followed them to the letter and nothing has worked so far.

  Hi Jane,

  Yes, I'm having a great time. Thank you.

  Screenshots that you shared, it's an Atheros AR9002WB-1NG wireless network adapter.

  If you do not want to uninstall the old drivers I suggest that you try to update the driver from Device Manager.

  Even if it is not up-to-date, it won't bother the driver works.

  From the next page

  https://www.Atheros.cz/Atheros-INF-file.php?INF=423&chipset=31&system=6

  Copy the text from the [version]

  ___________________________________________________________________________________

  

  ___________________________________________________________________________________

  So far

  ___________________________________________________________________________________

  

  ___________________________________________________________________________________

  Use keyboard shortcuts, it's a file of confectioners.

  Copy the text into a Notepad file and save it as netathrx.inf

  After saving it GO to Device Manager right click on the Atheros AR9002WB-1NG, , click on the driver tab, now click on update driver, click Browse my computer for driver software, point to the location where you previously saved the netathrx.inf, select the file and click Next.

  The driver will be updated.

  I hope that this will solve the problem of unsigned driver.

• Connection problems with atheros ar9002wb-1ng

  I have 2 computers laptop toshiba satellite.  I just updated my router to Belkin ac1200 wireless router.  I'm having connection problems with my satellite l750, with atheros ar9002wb-1ng wireless network adapter - keeps disconnecting with a signal strength low however the other satellite I with a realtek rtl8188ce wireless lan has an excellent signal strength and works very well - how to fix this?   I'm not very techno so easy instructions please.  Thank you.

  Hi Jak,

  Welcome to Microsoft communities.

  I understand that the wireless connection is disconnected.

  1. don't you make recent changes that caused the problem?
  2. any message/error code?

  Try the steps in the following methods and check the status of the issue.

  Method 1:

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Configure the computer to clean start State to check software conflicts and check the status.
  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the article mentioned above.

  Method 3:

  Wi - Fi and in Windows network connection issues.
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

• Satellite L750D-159: different problems: wireless network adapter, freezes, power

  Hi all

  2.5 years ago I bought L-750d-159:
  Video: AMD Radeon HD 6520G (TM)
  Wireless: Atheros AR9002WB-1NG wireless network adapter
  CPU: AMD A6 - 3400 M APU with graphics Radeon (TM) HD
  RAM: 4 GB
  OS: Windows 7 Home Edition SP1, 64-bit.
  BIOS: 2.1

  For the majority of the last 2.5 years I had the same questions, alternating between them over and over again without solution in sight.

  Repetition of questions: *.
  1. wireless adapter goes dead, no help of the troubleshooter in windows. Only restart help to, rarely he demans restart another. at the same time #2 arrives:

  2. cannot read USB (IE external HARD disk). allows you to restart.

  3. wireless mouse does not respond. Randomly, reset help.

  4 gel. Sometimes, when there is nothing running in the background. Of course, hard restart (only power button)

  5. office freeze.not always, but if he gets in the mood, he could go the days where minutes after I start the 'word' it would just freeze. Hard reset again.

  6. "atikmpag' blue screen. After not having it for a long time, I started just have it again.

  7 power supply and battery issues:

  7.1 with battery:
  Suddenly load stops. disconnect and reconnect do not help.
  Fresh only when the computer is turned off.

  7.2 without battery:
  Instant stop. Usually when you use Chrome.

  These issues are alternating, everyday sense I get something else, without a prescription for them that I noticed.

  * How to try to remedy: *.
  1. updated all the drivers for the toshiba page.
  [Page drivers Toshiba | http://www.toshiba.co.il/innovation/download_drivers_bios.jsp]

  2. update the BIOS. I do this cotton after having feeding problems, not so useful.

  3. formatting and reinsalled Windows 7 to factory settings.

  I am sure that there is a solution out there, the computer itself works fine for me (when it works) and I will not buy a new one, until it falls dead (I could give a year or two).

  Are you guys famliar with these questions?

  Here are the proven solutions for this model?

  Post edited by: fish85

  > 1. Wireless adapter goes dead, no help of the troubleshooter in windows. Only restart help to, rarely he demans restart another.

  WLan problems could appear for different reasons. I don t think that it is a WLan driver problem. I think that you should just check the WiFi configuration.
  For example, you should check whether changing the WiFi 1-11 channel would improve performance. Also change the settings for encryption (WPA/WP2-AES, TKIP) is worth trying.
  Turn off all the settings for the WLan to save energy and check if there is a difference if you turn off the WLan mouse.

  > 2. Cannot read USB (IE external HARD disk). allows you to restart.
  Also the issue of USB can be related to energy saving settings.
  In the Device Manager-> USB Controllers-> properties-> tab power management option that allows the system to power off the device to save power.

  > blue screen "atikmpag. After not having it for a long time, I started just have it again.
  This file/process is tied to the ATI graphics card. Try to use the latest graphics card driver. An update is recommended in this case.

  Battery issues:
  Well, sooner or later each battery must be replaced. I put t know if your battery is malfunctioning but probably new battery would help to resolve the issue
  In addition, to remove and uninstall the device control method battery Microsoft acpi located in Device Manager.

• Satellite L750/052: Atheros AR9002WB-1NG supports only WPA?

  I seem to have a problem with a L750/052.
  I have the latest version of the driver for the Atheros AR9002WB-1NG, which is 9.2.0.316.0.
  I'm trying to connect to the modem/router is a Netgear DGND3700.

  When buying at the origin it would not connect to the wireless network it just kept rejecting the key wireless WPA2 (AES).
  I've set up a WPA (TKIP) network and it recognizes the key but it will just keep stalling even if in the same room to the modem/router.

  To further reading, I discovered a lot of Atheros cards Wireless will not support encryption WPA/WPA2 and WEP, which is much less secure support and wireless manufacturers stopped including it products out there.

  Y at - it a newer firmware that could solve the problem of the WPA or includes support for WPA2 (AES)?

  My other Toshiba has a Realtek Wireless card and no questions.

  Hello

  I found this PDF on AR9002WB-1NG specifications:
  http://www.QCA.Qualcomm.com/media/product/product_75_file1.PDF

  It s mentioned here that the Atheros card support AES, TKIP, WEP security.
  Then you should be able to use AES (WPA) encryption.
  But this map is only 2.4 Ghz

  If you need to make sure that your router is also 2.4 Ghz; This means that you must use the standard 802.11 WiFi B or G (802.11 N runs at 2.4 Ghz and 5 GHz)

  By the way; Frequency 2.4 Ghz is used by other different devices such as microwave, baby monitor, or Bluetooth, so it could be possible that these devices are thus the signal of your Wlan.

  By the way; the latest Atheros divers can be found here:
  http://APS2.toshiba-tro.de/WLAN/

• Atheros AR9002wb-1ng constantly need reset troubleshooting

  I have a laptop ASUS N53SV card Atheros AR9002wb-1ng. Last week, the connection continues being dropped randomly and reset of the card is the only thing that will fix it.

  I already tried things:
  • Change the channel on the router (it goes from 1 to 11, no difference)
  • Disabling the adapter power management settings
  • The reactivation of the adapter power management settings
  • Install a new driver (from what I could find, I could have done this wrong)

  And finally:

  • Uninstall the card completely and restarted my computer, which he has reinstalled everything from scratch.

  It was the last thing I did to try to solve the problem. It worked for about an hour, but now I have a new problem: troubleshooting tool resets over the adapter, then now, I do it manually each time by the Manager of devices of deactivation and activation (which I do every 10 minutes approximately).
  Do you think this could be a hardware problem? I don't know what to do to solve this problem.

  Hello

  Have you checked for updated firmware for the router?

  Collate ASUStek support, their drivers and documentation online and ask for their
  Forums about known problems. There may be a problem hardware or driver known with
  solutions.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  Also check with Atheros updated drivers.

  Drivers Atheros WiFi.
  http://www.Atheros.cz/Atheros-wireless-drivers.php

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite P15-8409, Atheros wireless network adapter problem

  Hello. I'm having a frustrating problem with an old laptop Satellite P15. I restored the phone to default settings using the recovery disk that the system was working very badly. After that, the wireless network adapter has stopped working. In the Device Manager "Atheros AR5001X + Wireless Network Adapter" is marked with a yellow exclamation point. In the menu properties, under general, the State of the device the following is listed:

  The device cannot find enough free resources that it can use (code 12)

  The operating system is Windows XP Home Edition. The same problem has been present in SP1, SP2 and SP3. I also updated the BIOS to V2, but it also did not help.

  At work, we use a wireless internet connection. At home, I have a DSL connection. Curiously, when I plugged the network cable to the House, the yellow exclamation mark disappeared and a wireless connection icon appeared in the network connections window. I assumed that the problem has been resolved by updating to Windows; However when I brought the computer in the office, the wireless adapter was once more in the State I described.

  I searched the internet for the same problem, but was unable to find anything. I would be very happy to help.

  all the best,

  James

  BIOS version is installed on your machine? And you have you recently changed some hardware etc...?

  I don't know what it could be, but in the worst cases, the wlan card has certain shortcomings. You can check this by getting somewhere such an atheros wlan card or intel and install it instead of the one installed.

  Maybe the exchange of cards should solve this problem?

  Welcome them

• Atheros AR5004G wireless network adapter

  Hello

  I own a Toshiba Satellite P30 Bios version 1.30, XP SP2, and I've been very happy with it until recently.

  Since a few weeks I meet from time to time system crash, the computer crashes: does not react on the keyboard, screen freezes and only by pressing the power button for 30 seconds for a total power down allows. Fans spin again. Sometimes, after a such restart on diagnosis (before Windows starts) display the following message can be read: resource conflict - PCI network in the Groove 3 controller. Bus: 02; Feature: 02; Function: 00.
  It is the only PCI card that has my system.

  There was no material added to the system, the message is quite strange. Wait a few minutes and turn it back on it cause do not receive this message. Also helps dismantle the card wireless built-in, wait a second and mount it again.

  When I use the computer connected to the LAN via a network cable, while radio signals are turned off, the problem not more occurs. When I disable the Atheros AR5004G Wireless Network Adapter in Windows, the problem is not to be produced.

  There is no message in the event viewer.

  I do not use recovery Toshiba OS, but Windows XP Professional with Service Pack 2 installed by our system administrator. The same Setup worked without a problem for about 3 months. After that I met the problem I tried to reinstall the drivers and software for the network adapter wireless since the original CD from Toshiba, but not helped.

  I use the Atheros Client Utility version 3.1.2.19
  Version of the driver name AR5211, C:\Windows\system32\drivers\ar5211.sys, 3.1.2.12.

  I saw another user, peter-jaap mentioned on this forum a few weeks earlier the same problem. Any help would be appreciated.

  Kind regards

  Laszlo

  Hi Laszlo

  In my opinion, there is a hardware conflict. You said that you have this problem for a few weeks. Do you have some changes or install software? This laptop comes with Windows XP SP2 home edition, and all the drivers that you have on CD tools & utilities are fit to work properly with SP2.

  It's very strange that for awhile in particular this issue occurred. If you disable the network adapter in Device Manager you can use the card wireless without problems?

  All drivers and tools on the recovery CD are adapted to work correctly with the laptop and it can sometimes be a big problem to prepare the laptop on your own with some specific configuration. In my opinion if there is no solution to your problem, you must contact partner in your country.

• Atheros AR5125 wireless network adapter does not

  Atheros AR5125 wireless network adapter not working not properly, says cannot find driver information too

  Any help, please notify!

  JudyB_729

  Judy

  What operating system do you use?  I would like to move to the section appropriate for your driver problem, but can't until I know.  BTW this section isn't for comments etc site technical support

• Qualcomm Atheros QCA61x4 Wireless Network Adapter driver 12.0.0.116 gives a slow speed.

  I bought aspire V3 - 574 G-54VY a month back. It runs on windpws 10 64-bit. There is a problem with the Qualcomm Atheros QCA61x4 Wireless Network Adapter. Whenever I update the driver to version 12.0.0.116 I face extremely slow internet. But when I go back to the previous version of the driver 4.0.0.115 i.e., the speed is correct. Can someone help me with this issue, because I'm not able to determine whether or not I have a defective laptop. The center of same service replaced the wifi card, but always the same question comes up. Thanks in advance.

  Hi guys Finally I found the problem with the help of a technician

  The problem was with power settings. When the laptop is plugged in, he took the full speed and slow battery mode. The solution is:

  Goto settings-> system-> power and sleep-> additional power settings-> settings of plan (plan selected)

  OR

  Search for Goto-> type Control Panel-> hardware and sound-> Power Options->-> change the parameters of the plan (plan selected)

  Then

  change power settings advance-> adapter settings-> power saving mode-> Set battery maximum performance wireless

  Check your speed now (if necessary reboot)

  I am now using the updated driver 12.0.0.191 and internet high speed is correct.

• disconnecting from the ad hoc wireless network

  I have problems with the ad-hoc wireless network connection. Internet connection is not necessary, I want to just connect two laptops vista to play Civilization4. We had two laptops connected properly for a few days and enjoyed the game. But now the connection does not appear to work properly.

  Two portable computers connect to each other and then after a short perion one of them disconnects with a message saying "in waiting for other users to connect."

  It's the same no matter what either portable sets up the connection.

  We tried to establish new connections of two laptops and welcomed the connections between each of them also, the problem is the same.

  We have tried to disable the firewall without success

  There are other parameters that we should look at?

  Hi Bm_mad,

  This problem may occur if the enable IEEE 802. 1 X authentication for this network check box is selected. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To resolve this issue, use one or more of the following methods in the order in which they are provided. After you complete each method, verify that the problem is resolved. If a method does not resolve the problem, continue to the next method.

  Method 1: Disable IEEE 802 authentication. 1 X

  To disable authentication IEEE 802. 1 X, follow these steps:

  1. Click Start, click run, type ncpa.cpland click OK.
  2. Right click on your wireless network connection and then click Properties.
  3. Click the wireless networks tab.
  4. Under preferred networks, click your wireless network, and then click Properties.
  5. Click the authentication tab, click to clear the enable IEEE 802. 1 X authentication for this network check box, and then click OK twice.

  Method 2: Remove and re-create the wireless network connection

  To remove and re-create the wireless network connection, follow these steps:

  1. Click Start, click run, type ncpa.cpland click OK.
  2. Right click on your wireless network connection and then click Properties.
  3. Click the wireless networks tab.
  4. Under preferred networks, click your wireless network, and then click Remove.
  5. Click view wireless networks.
  6. Under management of the network, click Refresh network list.
  7. Under choose a wireless network, click the wireless network to which you want to connect, and then click connect.

  Method 3: Solve the USB wireless network adapters

  If you have an adapter (USB) wireless universal serial bus, you may experience problems that are related to the limitations of USB. If you have several USB devices, the USB network adapter can share, bandwidth, power or both to a level that it causes, you experience the symptoms described in the Symptoms"" section. To resolve this issue, try the following suggestions:

  • If the computer has more than one USB bus, connect the wireless network adapter to its own USB bus. Connect other USB devices to a different USB port. As a general rule, two USB ports share one USB bus.
  • Disconnect all USB devices that are unused or not.
  • Use a powered USB hub to connect the adapter to your computer.

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Changing the settings of the WLAN with an Atheros AR5007EG Wireless Network Adapter running on a Vista computer

  How can I set the preset wlan on ONE for an Atheros AR5007EG Wireless Network Adapter running on a Vista computer.  Currently, the default is OFF and I need to use the Fn F1 to bring up the option to turn it on, Iwant my laptop to connect to my wireless router automatically without having to do that.

  Thank you

  Hi Cath.

  In most cases, it is a configuration in the BIOS of the laptop that will solve the wireless by card.

  Then start the laptop enter in BIOS and look for an entry that configure the wireless to be all the time card.

  Where necessary the manual or computer support site must have the necessary info.