Random error of panic

Hi a little new to this. But I just bought this mac from a friend. And a bit confused as to why it reboots randomly with a panic error. It's not very often, however.

I wiped and installed fresh 10.11.4, with no time restored machine in the it.

I've had it for a day and there were 3 panic since.

Here is the report.

* Panic report *.

panic (cpu 0 0xffffff802abce40a appellant): Kernel trap at 0xffffff7fad2432e2, type 13 = General protection, records:

CR0: 0X000000008001003B, CR2: 0X00000001419B8000 CR3: 0X000000002ECEB000 CR4: 0X00000000000626E0

RAX: 0XBFFFFF802ABCCF70, RBX: 0XFFFFFF804165D800 RCX: 0X00000779CC3B3DCF RDX: 0 X 0000000000000000

RER: 0XFFFFFF916F0E3D80, RBP: 0XFFFFFF916F0E3E60, IHR: 0 X 0000000000000003, RDI: 0X00000779CC3A5BC5

R8: 0XFFFFFF804165F000, R9: 0XFFFFFF7FAD265E20, R10: 0X00000779CC1CC89D R11: 0X00000000E0000000

R12: 0XFFFFFF804165F000, R13: 0XFFFFFF7FAD267E20, R14: 0XFFFFFF8144C7C148 R15: 0XFFFFFF804165F000

RFL: 0 X 0000000000010046, RIP: 0XFFFFFF7FAD2432E2, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

Lack of CR2: 0x00000001419b8000, error code: 0 x 0000000000000000, CPU error: 0x0, PL: 0

Backtrace (CPU 0), frame: return address

0xffffff8144c87c50: 0xffffff802aadab12

0xffffff8144c87cd0: 0xffffff802abce40a

0xffffff8144c87eb0: 0xffffff802abec273

0xffffff8144c87ed0: 0xffffff7fad2432e2

0xffffff916f0e3e60: 0xffffff7fad242690

0xffffff916f0e3f20: 0xffffff802abd0169

0xffffff916f0e3f40: 0xffffff802aaf22bd

0xffffff916f0e3f90: 0xffffff802aaf27b0

0xffffff916f0e3fb0: 0xffffff802abc8e27

Extensions of core in backtrace:

com.apple.driver.AppleIntelCPUPowerManagement (218.0) [b - A7 2C9DB45F31]@0xffffff7fad240000-21E4FDDE-336bis-3665-824 > 0xffffff7fad26afff]

Corresponding to the current thread BSD process name: kernel_task

Mac OS version:

15E65

Kernel version:

15.4.0 Darwin kernel version: Fri Feb 26 22:08:05 PST 2016; root:XNU-3248.40.184~3/RELEASE_X86_64

Kernel UUID: 4E7B4496-0B81-34E9-97AF-F316103B0839

Slide kernel: 0x000000002a800000

Text of core base: 0xffffff802aa00000

Text __HIB base: 0xffffff802a900000

Name of system model: MacBookPro8, 2 (Mac-94245A3940C91C80)

Availability of the system in nanoseconds: 8219697015314

last load kext to 7903812237923: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7fae527000 size 32768)

Finally unloaded kext to 8038578579656: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7fae527000 size 32768)

kexts responsible:

com.apple.driver.AudioAUUC 1.70

com.apple.driver.AppleHWSensor 1.9.5d0

com.apple.driver.AGPM 110.21.18

com Apple.filesystems.autofs 3.0

com.apple.driver.AppleOSXWatchdog 1

com.apple.driver.AppleMikeyHIDDriver 124

com.apple.driver.AppleMikeyDriver 274.7

com.apple.driver.AppleUpstreamUserClient 3.6.1

com Apple.Driver.pmtelemetry 1

com.apple.kext.AMDFramebuffer 1.4.2

com.apple.iokit.IOUserEthernet 1.0.1

com.apple.driver.AppleHDA 274.7

com.apple.iokit.IOBluetoothSerialManager 4.4.4f4

com.apple.Dont_Steal_Mac_OS_X 7.0.0

com.apple.AMDRadeonX3000 1.4.2

com.apple.driver.AppleIntelHD3000Graphics 10.0.0

com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

com.apple.driver.AppleHV 1

com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.4f4

com.apple.driver.SMCMotionSensor 3.0.4d1

com.apple.driver.AppleSMCPDRC 1.0.0

com.apple.kext.AMD6000Controller 1.4.2

com.apple.driver.AppleSMCLMU 208

com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0

com.apple.driver.AppleLPC 3.1

com.apple.driver.AppleMuxControl 3.12.6

com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

com.apple.driver.AppleThunderboltIP 3.0.8

com.apple.driver.AppleMCCSControl 1.2.13

com.apple.driver.AppleUSBTCButtons 245,4

com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

com.apple.BootCache 38

com.apple.driver.AppleUSBTCKeyboard 245,4

com.apple.driver.AppleIRController 327,5

com.apple.iokit.SCSITaskUserClient 3.7.7

2.8.5 com.apple.iokit.IOAHCIBlockStorage

com.apple.driver.AirPort.Brcm4331 800.20.24

com.apple.driver.AppleSDXC 1.7.0

com.apple.iokit.AppleBCM5701Ethernet 10.2.0

com.apple.driver.AppleFWOHCI 5.5.2

com.apple.driver.AppleAHCIPort 3.1.8

com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

com.apple.driver.AppleSmartBatteryManager 161.0.0

com.apple.driver.AppleACPIButtons 4.0

com.apple.driver.AppleRTC 2.0

com.apple.driver.AppleHPET 1.8

com.apple.driver.AppleSMBIOS 2.1

com.apple.driver.AppleACPIEC 4.0

com.apple.driver.AppleAPIC 1.7

com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

com Apple.NKE.applicationfirewall 163

com Apple.Security.Quarantine 3

com.apple.security.TMSafetyNet 8

com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

com Apple.kext.Triggers 1.0

com.apple.driver.DspFuncLib 274.7

com.apple.kext.OSvKernDSPLib 525

com.apple.iokit.IOSurface 108.2.1

com.apple.iokit.IOSerialFamily 11

com.apple.iokit.IOAcceleratorFamily2 205.3

com.apple.driver.CoreCaptureResponder 1

com.apple.iokit.IOFireWireIP 2.2.6

com.apple.driver.IOPlatformPluginLegacy 1.0.0

com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.4f4

com.apple.iokit.IOBluetoothFamily 4.4.4f4

com.apple.driver.AppleHDAController 274.7

com.apple.iokit.IOHDAFamily 274.7

com.apple.iokit.IOAudioFamily 204.3

com.apple.vecLib.kext 1.2.0

com.apple.kext.AMDSupport 1.4.2

com.apple.AppleGraphicsDeviceControl 3.12.6

com.apple.driver.AppleSMBusPCI 1.0.14d1

com.apple.driver.IOPlatformPluginFamily 6.0.0d7

com.apple.driver.AppleGraphicsControl 3.12.6

com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

com.apple.driver.AppleBacklightExpert 1.1.0

com.apple.iokit.IONDRVSupport 2.4.1

com.apple.driver.AppleSMC 3.1.9

com.apple.driver.AppleSMBusController 1.0.14d1

com.apple.iokit.IOGraphicsFamily 2.4.1

com.apple.driver.CoreStorage 517.20.1

com.apple.driver.AppleUSBMultitouch 250,5

com.apple.iokit.IOUSBHIDDriver 900.4.1

com Apple.Driver.USB.cdc 5.0.0

com.Apple.Driver.USB.Networking 5.0.0

com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

com.apple.driver.usb.AppleUSBHub 1.0.1

com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

com.apple.iokit.IOBDStorageFamily 1.8

com.apple.iokit.IODVDStorageFamily 1.8

com.apple.iokit.IOCDStorageFamily 1.8

com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

com.apple.iokit.IOAHCISerialATAPI 2.6.2

com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

com.apple.driver.AppleThunderboltNHI 4.0.4

com.apple.iokit.IOThunderboltFamily 6.0.2

com.apple.iokit.IOEthernetAVBController 1.0.3b3

com.apple.iokit.IO80211Family 1110.26

com.apple.driver.mDNSOffloadUserClient 1.0.1b8

com.apple.iokit.IONetworkingFamily 3.2

com Apple.Driver.corecapture 1.0.4

com.apple.iokit.IOFireWireFamily 4.6.0

com.apple.iokit.IOAHCIFamily 2.8.1

com.apple.iokit.IOUSBFamily 900.4.1

com.apple.driver.usb.AppleUSBEHCI 1.0.1

com.apple.iokit.IOUSBHostFamily 1.0.1

com.apple.driver.AppleUSBHostMergeProperties 1.0.1

com.apple.driver.AppleEFINVRAM 2.0

com.apple.driver.AppleEFIRuntime 2.0

com.apple.iokit.IOHIDFamily 2.0.0

com.apple.iokit.IOSMBusFamily 1.1

com Apple.Security.sandbox 300.0

com.apple.kext.AppleMatch 1.0.0d1

com.apple.driver.AppleKeyStore 2

com.apple.driver.AppleMobileFileIntegrity 1.0.5

com.apple.driver.AppleCredentialManager 1.0

com.apple.driver.DiskImages 417.2

com.apple.iokit.IOStorageFamily 2.1

com.apple.iokit.IOReportFamily 31

com.apple.driver.AppleFDEKeyStore 28.30

com.apple.driver.AppleACPIPlatform 4.0

com.apple.iokit.IOPCIFamily 2.9

com.apple.iokit.IOACPIFamily 1.4

com.apple.kec.Libm 1

com Apple.KEC.pthread 1

com Apple.KEC.corecrypto 1.0

System profile:

Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)

Bluetooth: Version 4.4.4f4 17685, 3 services, 27 aircraft, 1 incoming serial ports

Bus crush: MacBook Pro, Apple Inc., 25.1

Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x04CB, 0x414D314C313642433852322D42314A532020

Memory module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x04CB, 0x414D3155313642433250312D423141482020

USB device: USB 2.0 Bus

USB device: Hub

USB Device: IR receiver

USB device: USB 2.0 Bus

USB device: FaceTime HD camera (built-in)

USB device: Hub

USB device: Apple keyboard / Trackpad

USB device: Hub BRCM2070

USB Device: USB Bluetooth host controller

Serial ATA Device: TOSHIBA MK5065GSXN, 500,11 GB

Serial ATA Device: HL-DT-ST DVD - RW GS31N

Model: MacBookPro8 2, 4 processors, Intel Core i7, 2.2 GHz, 10 GB, BootROM MBP81.0047.B2C, MSC 1.69f4

Network service: Wi - Fi, AirPort, en1

Graphics card: integrated Intel HD Graphics 3000, Intel HD Graphics 3000,

Graphics card: AMD Radeon HD 6750 M, AMD Radeon HD 6750 M, PCIe, 512 MB

The spare memory that is installed does not respect the specifications of your model (1333 MHz SDRAM.) Please reinstall the original memory, or install the new memory of the correct type.

Any vendor deemed RAM will be a web form where you can select the Mac model and be directed to the compatible parts.

Tags: Notebooks

Similar Questions

  • Error xerces panic!

    I used the first elements 3.0 and did not open for awhile and when I did I got error Xerces panic.  I uninstalled it because I was going to move anyway to 7.  Had a friend help me to do a registry clean to try to get rid of bad entries like said in other forums.  Installs 7, it took all night and now I can't always opens... same error message.  Everyone get this error?

    Hi, Pinksurvivor,

    What version of Windows are you using?

    Try the solution listed here:

    http://social.technet.Microsoft.com/forums/Windows/en-us/174d279e-5537-46E9-BA2E-76095becdb49/Xerces-panic-error

  • Get random errors and missing fonts after July 2011 service pack installation.

    Original title: July 2011 service pack... it completely trashed my software... How can I fix... I can't do system restore yet because no words to do

    I get random errors and missing fonts in all directions... everything was going well until the package of July tried to install it, and then everything went haywire.

    Hi KarenBillette,

    1 do you have. which Service pack tried to install?

    2 Windows operating system you are using?

    Method 1:

    You can try to remove the update from Windows update and check.

    Remove an update

    If this is not possible, then you can try to boot in safe mode and check if you can do a system restore.

    Method 2:

    Step 1: Try to start in safe mode.

    Start your computer in safe mode

    Step 2:

    You can try to perform a system restore to a point of restoration before the update was installed.

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    To run the system restore, you can consult the following links:

    System restore

    System Restore: frequently asked questions

    Hope this information is useful.

  • Get random errors every time I try to run some programs/Installer

    So whenever I try to run something I downloaded for example: microsoft .NET framework, I get the error "could not find the volume of extraction of the file. Make sure you have the appropriate permissions. »
    Then I go and do a right click on this program, click on "add to archive...". "and when I add it to winrar and run through winrar it everything works fine without errors.

    Here is another example when I try to run some other installer I get the same error «Setup could not create the C:\Users directory...» "Error 5: access is denied."

    Or an error like this "runtime error!" "Program C:\... abnormal termination of the program.

    I have tried every thing and nothing worked pls help, it seems that I have some problems with the permissions and I can't get it fixed.

    The only solution is to add the winrar program and run it. But I want to solve this problem completely. Help, please.

    Edit: So I've downloaded again the framework and received the error «You have not enough space...» "and I like 800 GB free in both drives Idk what is happening with this random errors.

    Hello

    Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

    According to the description, I understand that you have the problem with random errors when you try to run certain programs on the system.

    Certainly, I understand your concern and will try my best to help you.

    I would suggest trying the following methods and check if that helps.

    Method 1:

    Try to run the troubleshooter of performance and check if it helps. Please follow the steps outlined in the article below.

    Note: The resolution of performance problems check issues that could slow down the performance of your computer, such as how many users is currently connected to the computer and if multiple programs are running at the same time.

    Open the troubleshooter of Performance

    http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

    If the problem persists, follow method 2

    Method 2:

    I suggest you try to follow the steps in the link given below and check if it helps.

    How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

    https://support.Microsoft.com/kb/929833?WA=wsignin1.0

    Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article describes how run the tool (SFC.exe) System File Checkerto scan your system for files and to repair the system missing or corrupt files in Windows. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

    If the problem persists, follow method 3

    Method 3:

    Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft, security scanner please follow the steps in the link provided below.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

    I hope this information is useful.

    Please let us know if you need more help, we will be happy to help you.

    Thank you.

  • Random error code ActionManager ESTK

    Hello

    I'm stuck with random errors ESTK on ActionDescriptors/ActionReferences:

    DB_ 2012-08-10 at 10.49.15.png

    I am bearing scripts on them and, sometimes, the script stops at innocuous lines like the one above (Yes, Photoshop is the target, if you ask )

    There is no way to pass through, I restart PS and all (the same script) works well again - but it's quite annoying during debugging.

    Mac OSX Mountain Lion, PS CS6 - rearm PS prefs, the permissions of the drive ok... what else, Voodoo?

    Thanks in advance

    Davide

    Get it, finally.

    The following function was buggy:

    PSUtils.clipLayer = function() {
      var d, r;
      d = ActionDescriptor;  // here lies the typo
      r = ActionReference;   // and there too
      r.putEnumerated(s2t('layer'), s2t('ordinal'), s2t('targetEnum'));
      d.putReference(s2t('target'), r);
      executeAction(s2t('groupEvent'), d, DialogModes.NO);
      return void 0;
    };
    

    For reasons that I can't (you have suspicion?), in the first round, the script finished without error anyway, and the output is as expected. How is it?

    The second round it crashes, not in the lines of buggy (easy as pie), but in another innocent function where the good

    d = new ActionDescriptor();
    r = new ActionReference();
    

    are declared.

    Thanks to all those who intervened to help with suggestions

    Davide (who tomorrow morning will be on his way to a long - very well needed - holiday weekend in the mountains away from any electronic device with display on it of the United Nations)

  • Lenovo Z50 - 70 gel random error

    Hello!

    I just bought a Lenovo Z50-70 (840 M, i5, 1 to SSHD), and I have a very annoying problem.

    Installed Win 8.1 Pro with drivers from the DVD. All right, it is not all errors in the Manager devices, but random computer crashes (the cursor does not move, it is not for nothing), so I have to restart it by pressing the power button for 5 seconds.

    How can I fix? I hope this isn't a hardware problem.

    Thank you for the answers.

    I write my solution for this problem.

    Freezing at random was caused by electrostatic discharge. I used the laptop in a glass surface, and when I touched the metal parts, the discharge made and caused the gel.

    I put my laptop to a wooden table, the problem abandoned.

  • HP Designjet 5500: Random Error Messages

    This image occurs in the course of employment. We see very briefly (2-3 seconds) at random times.

    Then, this image occurs after the machine beeps. Sometimes (about 25% of the time) this will disappear and the print job will resume after a minute or two. Until repeat error messages.

    This image will be the other 75% of the time and I have to restart the printer, unload and reload the paper, and restart the print job (very long)

    Please help me. I don't know if I've included enough information, but please do not hesitate to ask me, you need to know to solve this problem.

    For the last error of repair:

    System error: 0d 0004 xxxxxxxx (no-no blocking)
    Problem
    Description:
    This is a general error code that may appear in the
    The print head alignment process. The probability of this error that appears is
    less than 0.5% and there is nothing wrong with the printer.
    Corrective action: Re-start of the printer and the error code should not reappear.

    For the first two, that you want to check to make sure that the tube Assembly on the left side is in place.  Remove all ink tanks, then open the back cover on the left side.  The sheath is held in place by 3 levers are compatible with slot machines Assembly completely pushed to the front of the printer.  Make sure that this is the case.  You will also want to gently clean the small copper color inside the empty cartridge chip.  Just use a Publix moistened with alcohol.  If this does not help, I would buy another cartridge of black ink.  It is also possible that the ink cartridge error is what is interfering with the print head alignment process, so the first fixing problem will fix all the problems.

  • Acer veriton m series. Freezes randomly, error msg 'itunes library not saved, insufficient disk space '.

    My Acer Veriton M290 randomly goes into 'critical' mode and starts flashing and error messages, i.e. "not saved itunes library, not enough disk space.  "can't open the Task Manager, close some programs and try again" (and there will be no programs running).  «windows update is not installed, go to the center of the action to put in place»  When I try to go to the Control Panel, I get - "too many programs running, close some programs and try again" or he just turns off.  When I turn it back on again, everything will return to normal, for a few days anyway.  I am not at all computer savvy and use my computer for e-mail, itunes and my daughter uses it for its SIMS.  What I do to upset my computer?

    Hello.

    We can start from this solution.

    To start your computer using the last good known Configuration, follow these steps:

    1. Start your computer.
    2. When you see the message "Please select the operating system to start", press the F8 key.
    3. When the Windows Advanced Options menu appears, use the ARROW keys to select last good Configuration known (your most recent settings that worked)and press ENTER.
    4. If you use other operating systems on your computer, use the arrow keys to select Microsoft Windows XP, and then press ENTER.

    If this does not help, we think of something else.

  • Drops network connection randomly, error message in Event Viewer ' TCP/IP NetBIOS Helper service was successfully sent a stop command, error code: 0 x 40030011.

    Original title: network Drops randomly: the TCP/IP NetBIOS Helper service was successfully sent a stop control

    The given reason was: 0 x 40030011 [OS: network connectivity (planned)]

    I want a definitive answer for this! For some reason any that never seems to have been resolved. I'm on a Samsung qx410 computer J01 laptop with windows 7. The wireless adapter is an Intel Centrino Advanced - N 6250 AGN. I've tried making it so the adapters could not be disabled for reasons and basically all of the steps for this energy saving. I did everything with the drivers and software. In the event log, it has this event where he falls TCP/IP NetBIOS support apparently without reason? I then immediately lose my connection and it never seems to happen with the rhyme or reason. Any suggestions? It doesn't seem to be a hardware problem either. Where is microsoft on this topic? It seems to be a Windows 7 problem...

    Hello

    1 have had any changes made on the computer before the show?
    2. do you have a wired or wireless network connection?
    3. do you get an error message? If Yes, what is the full and exact error message?

    If you use try Method 1 of the Wi - Fi connection.

    Method 1:
    Disable authentication IEEE 802. 1 X.
    This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

    To disable authentication IEEE 802. 1 X, follow these steps:
    (a) click Start, type ncpa.cpl, and then press enter.
    (b) with the right button of your wireless network connection and then click Properties.
    (c) click the wireless networks tab.
    (d) under preferred networks, click your wireless network, and then click Properties.
    (e) click on the tab authentication, click keyar authentication to enable IEEE 802. 1 X for this network check box, and then click OK twice.

    Method 2:
    Try the procedure described in the link to create a new network profile.
    Create or modify network profiles
    http://Windows.Microsoft.com/en-us/Windows7/create-or-modify-network-profiles

    Method 3:
    If the problem persists, you can try the procedure described in the link and check.

    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 4:
    If the problem persists, you can try to reset the Internet Protocol.
    How to reset the Protocol Internet (TCP/IP)
    http://support.Microsoft.com/kb/299357

    Method 5:
    If still the issue remains, control whether or not the service is set to automatic.

    (a) click Start and type services.msc in the search box.
    (b) search of the computer browser.
    (c) series the service to automatic.

    Steps to set the auto services

    a. Locate the service (computer browser)
    b. right-click on the service
    c. If the service is stopped , then Start the service
    d. Select Properties
    e. and in the Startup type , select Automatic.

    Hope this information is useful.

  • "View Composer agent initialization state random error.

    We use 4.0.1 build-233023 with linked clones with persistent desktop computers and we get "View Composer agent State (6) initialization error: unknown failure (expected 0 seconds)" errors that occur randomly after commissioning.  I've read several articles that indicate to restart the virtual machine will fix that, while it's very embarrassing that it works.

    However, we receive this error on the VMS, after commissioning and users have already connected to the virtual computer.  So if the VM goes to an error state, users get an error indicating that the office is not available!  A restart/reset of the user's virtual machine will correct this, but it would not be feasible.

    A - someone to find a permanent solution to this?

    Thank you very much!

    Food for thought: I removed all the variables unnecessary excesses on the 'Run' button and changed my script to restart to wait 30 seconds to run.  This time, the refresh of the Office were 0 errors (usually I see 1 or 2 with the initial thrust).  Once is not a trend, but I wanted to throw it out there.  The other thing, we've changed is diminished the simultaneous provision to the vCenter server to '1' (just in case this error is caused View Composer have too busy).  I will update if things do not work in the long term with the fixes above.  Thank you!

    Brandon

  • TestStand GUI (TestExec.exe) indicates random error-17500 (TestStand SeqEdit R6025-pure virtual call)

    Using Labview 2009 and TestStand 4.1, I developed a test solution.

    Found that I get the intermittent error-17500 appear when running my movie file using the TestExec.exe (simple UI of TestStand), who abandons then stable.

    I then used the TestStand sequence editor to run my seq file and even once, I get an intermittent failure, but this time he points out:

    Microsoft C++ Runtime Library Error R6025 - virtual call pure - seqedit.exe

    Seems that this must be a bug in TestStand/Labview.

    Someone at - he never encountered this? Very annoying bug that it stops at our production line.

    Thank you

    Thanks for your reply.

    The problem disappeared when I changed my Labview in engine Labview TestStand adapter back to the Labview developer.

    I had to install the Labview license on this computer to use the license developer, but at least this got rid of the problem.

    I was expecting the Labview engine or TestStand, is more stable than that.

  • Trigger start and stop after desired number of pulses - random errors in my implementation

    Dear all,

    I used an example comes from here: http://zone.ni.com/devzone/cda/epd/p/id/5028

    My code works, but sometimes it gives me this error:

    Error -200279 occurred at Barkhausen_DAQ_raw.vi
    
    Possible reason(s):
    
    Attempted to read samples that are no longer available. The requested sample was previously available, but has since been overwritten.
    
    Increasing the buffer size, reading the data more frequently, or specifying a fixed number of samples to read instead of reading all available samples might correct the problem.
    
    Property: RelativeTo
    Corresponding Value: Current Read Position
    Property: Offset
    Corresponding Value: 0
    
    Task Name: _unnamedTask<37>
    

    Does someone could give me a clue why we get this undesirable behaviour? I make my code I've seen in the official example, only I have a little higher sampling frequency...

    Please find my screws attached.

    Thank you!

    Best regards

    The example looks like it's based on this one--both have the same flaws as someone of NOR should probably correct (or simply move the example of developer to the Community area and then we users can fix it for you instead ).  The issue that you are experiencing just how DAQmx uses the default settings to configure the buffer and the number of samples to read:

    (1) for a finite task, DAQmx chooses a default buffer size of the ownership of samples per channel (the entrance to DAQmx Timing.vi - in your case, 20000 samples).

    (2) for a task finished, by specifying - 1 for entry of number of samples per channel DAQmx Read.vi results in rereading the number of samples specified for the finished task (20000 same samples mentioned in #1).

    So, you can see the problem.  You constantly fill the buffer, but only to remove samples of the buffer into pieces which are the size of the buffer itself.  If something happens in the software a little delaying playback of samples from the buffer, you will end up overwriting data.  The buffer must be larger to compensate for (Alternatively, you can specify a number of samples to the call of DAQmx Read less than your number of configured samples for the finished task, but this seems like it would dimly to go about this).

    Another major problem with the example (it would lead to a different error) is the use of the task request made to decide or not to read all of the samples.  What happens if the task ends after the control has already been done and the reading is still waiting for all of the samples to be filled?  You will block during the full of reading call time-out and will get a time-out error, then don't read the remaining samples in the end due to the error of chaining (or in fact I think that samples would be available on the terminal data instead - but this inconsistency seems undesirable - I don't really like blocking for 10 seconds for pending data in all cases).

    There are also some minor problems with the example:

    • Why should I use so many samples after triggering when this will just make your acquisition performance more than necessary?
    • The "other samples" indicator only is not updated if there is any remaining samples, should we not update us so that it is empty rather than persist in any value has been on the indicator of the last execution of the VI?

    Well, now I've got off on a tangent.  The point is, in the example, there are a few flaws.  I think it of a great use case for DAQmx events and would have probably done something more like this (warning, the extract is not tested - it doesn't have the makings of additional counter your example is to divide the trig source ref):

    The solution to your specific problem is to configure the buffer (DAQmx Configure entry Buffer.vi).  Here, I'm gone with 2 x the number of samples read by iteration of loop (should probably be enough, maybe brought to come up with an algorithm based on the sampling rate however).

    Other patches are post trigger samples are now the 2 minimum (for a stop faster), DAQmx event is now used to determine the time to read all the data (to avoid the reading timeout after stopping), and the remaining data marker is always updated (to avoid stale data is displayed on the indicator in the case that there is no remaining data).

    If all goes well, Miss me not else...

    Best regards

  • Flash Builder random error associated with CFCS 'qnx-screen '.

    Hey all,.

    It's been about 8 months since I finally published my app PlayBook... It's been long since, so I'm a bit rusty...

    I'm seeing my source code, compile it with the new SDK.

    I downloaded the Simulator 2.0, updated the OS on my tablet to 2.0 and installed the new Tablet OS Beta 2.0 SDK.

    I am trying to get my application up and running, and I get this error:

    "Description Resource Path location Type
    "Could not open" / Applications/Adobe Flash Builder 4.5/sdks/RIM/blackberry-tablet-sdk-2.0.0/frameworks/libs/qnx-screen ' PaperRobo unknown Flex problem.

    I use a Mac and Flash Builder 4.5 running

    I use the Flex SDK 4.5.1... and it seems that all the appropriate Blackberry tablet SDK swcs are connected properly... See screenshot:

    Any ideas what's not here?

    It also looks that QNXApplicationEvent no longer exists?

    I also tried to create a new project from scratch and get the same error of Flash Builder

    I don't think that there is nothing wrong with your stature. Try to create a new project, as shown in jtegen and see if it works. If this does not work, you can still manually add the .swc files.

    It seems to be looking for them in the wrong place.

    "/ Applications/Adobe Flash Builder 4.5/sdks/RIM/blackberry-tablet-sdk-2.0.0/framework"

    s/libs/qnx-screen'

    Should be "/ Applications/Adobe Flash Builder 4.5/sdks/RIM/blackberry-tablet-sdk-2.0.0/framework"

    s/libs/qnx/qnx-screen

    If you do this be sure to do the qnx - air.swc marked as external.

  • Moved to the new server and updated applications upgraded to the APEX, 4.2.6.00.03 and get the random error when using IE 11.

    Hello

    I just moved a set of applications on a new server running Oracle 12 c and APEX 4.2.6.00.03, applications where initially on Oracle 10 G database with APEX 3.2.

    When you access via IE 11 users receive the error message after, when it appears that the only way to clear it is to close IE and reopen the application.

    apex_error.PNG

    There is an application that uses a database to MYSQL link, but the error when you use applications that do not use the link, so I'm not sure how to solve the problem.

    The error does not appear when you access applications through Chrome, but not all users have installed chrome.

    Thank you

    Ronnie

    Well Ronnie,

    This thread suppose to have a problem like yours and resolved. Please try on your side:

    After the footer I use: dbms_session.close_database_link ('mysql_databaselink_name');

    Please Urgent help on ora_sqlcode :-28500

    It will be useful.

    Thank you

    Sunil Bhatia

  • Random errors

    2 of our Acrobat Standard DC users will get a random message saying that Adobe Acrobat Reader DC has stopped working.  This happens usually when they have a PDF document is open, but doing something in Outlook or Word or are not even in front of their computer.  I created the

    C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheAcro

    C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheRdr

    directories, a few weeks ago.  They have Office 2013 Professional 32-bit installed on a Windows 7 Enterprise 32 bit OS.  I did a reinstall today but I am not convinced that the problem will be solved.  Everyone knows about this problem?  Why he says that Acrobat Reader DC does not work when it is the standard version.

    Hi Todd,

    We have released a fix for this problem. Please download the patch according to the version of your Acrobat on the link below: -.

    https://helpx.Adobe.com/Acrobat/release-note/Acrobat-DC-August-06-2015.html

    I hope this helps!

    Thank you

    Tanvi

Maybe you are looking for

  • Replacing the drive HARD on Portege R700

    Hello I just ordered a R700 and hope to upgrade the HARD drive of 320 GB for one SSD OCZ Vertex 2.Is it easy to replace the hard drive in the R700? Should I remove the keyboard is a Panel on the back?What size hard disk will - 2.5 "or 1.8"?A SSD will

  • Compaq presario CQ 5000 series (CQ5826) restore without disk. bypass the password.

    Hello, my partner has changed my password and can not remember what it is and I tried to reset factoy and may not know how do I tried F10, F11, F12 everything. I really just need to pass the password that I have a lot of data and pictures here, I am

  • UHD tv as monitor

    I have attached a UHD tv for my Aspire ATC-605-UB11 via HDMI, but television has remained empty. Any ideas, please?

  • Error code 0 x 80004004 download photos from an external hard drive

    original title: error code 0 x 80004004 I am trying to download pictures from external hard drive to computer and get the error code 0 x 80004004. However I do not understand in each folder.  Some records that only some of the images appear in the ti

  • sensitive site in muse

    Hello... I expose my problem: I'm doing a site in Adobe Muse and I use the sensitive function with breakpoints. I've included several break points and I hope that if I discovered the site of Apple devices (iPhone-Tablet PC laptop). The problem seems