Random OS freeze or crash after the Upgrade of the Sierra

Similar Questions

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

• Windows 7 64 x computer with up-to-date Norton 360 crashes after the last update__ critic

  Windows 7 64 x computer with up-to-date Norton 360 crashes after the last critical update. I had to go back to a recovery point before the last installed update. I had Norton 360 for nine with no previous Windows Update problems

  It seems to work after a reboot and a new attempt to update norton.   First, it froze.   I connect this because I heard that several win 7 64B machines at work had to be restored on 1/12 after a bad update.  I don't know if they also had norton.

• computer crashed after the automatic update Tuesday night

  Hi, Kevin

  My computer crashed after the automatic update Tuesday evening. The message indicates that the demand for window vista (which initially provided with the Lenovo computer, that I bought new in 2007) is not valid. When I rebooted and you press F5, it offers 3 options 'Security Mode', but no return explicitly beforehand updated status.

  I'm not familiar with uninstalling and restoring systems. Can you walk me through the process? Can I uninstall or restore when the computer is in mode security (limited capacity)? How a WAIK/Windows PE image downloaded to another computer to help me with the computer that is out?

  Your suggestion to install SP2 apply to windows vista home basic version, 2007?

  Thank you!

  REMOVE your product key from your last post as someone can use your key and
  It will make a lot of grief

  Call or contact the manufacturer of the system since you are using an OEM version.

  See this thread.

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/dd6dae5a-6659-4C84-aeb9-8f2d585a18eb
  Rob - bicycle - Mark Twain said it is good.

• Halo 2 crashes after the level "Gravemind".

  Halo 2 still crashes after the cutscene at the end of the level "The Gravemind".  The game acts like it's loading to the next level with the logo of Halo 2 and the vertical lighting of back and forth set.

  I had to play at this level twice, otherwise I can't get any achievement.  I'm tired of having to play at this level.
  My computer specs:
  AMD Phenom II X 4 955 3.2 Ghz Black Edition
  ATI Radeon 9870 x 2 1 GB GDDR5 Ram
  1 TB Western Digital Black
  ASUS M4A79T Deluxe Motherboard
  8 GB DDR3 1600 MHz Ram

  Hi Chuckthetekkie,

  Welcome to Microsoft Vista answers Forum!

  The system requirements for your computer is fine.

  I have a few here that might solve the problem.

  I suggest you perform the clean boot which disable the application non-Microsoft temporarily in conflict with programs. It helps us find what third-party application or service is causing the problem. Follow the steps in the link: how to troubleshoot a problem by performing a clean boot in Windows Vista: http://support.microsoft.com/kb/929135 Note: make sure to put the computer in a normal state, proceed to step 7 in the link. After you find out which application is causing the problem, please disable the program or application. If the problem persists, I suggest you to visit the site of the game Halo 2 to find if there are any updates or patches.

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Win XP crashes after the splash screen (charge PointSec)

  I have a laptop lenovo t400, which has Pointsec Encryption (6.1.3), and WinXP loaded thereon.

  I ran the update tool think that Vantage Lenovo that has downloaded and installed a number of updates - I didn't run it for centuries.

  Now when I try to start the computer it crashes after the XP splash screen is displayed. Simply, the screen goes black.

  I tried the options Mode safe (include VGA Mode and start with the last successful configuration) without success. Also, they fail to start.

  The flow rate is:

  Power On, screen authentication PointSec, Win XP Splash screen, and then a black screen

  I got successfully into the system using UBCD4Win with pointsec plugin loaded, load a WinPE environment on a USB and allows me to access the C: drive unencrypted (as I've authenticated with Pointsec).

  I'm really stuck for ideas as to the update is the cause of the problem and I'd love to hear some suggestions on how to remedy this situation.

  --

  Additional information:

  The last lines in ntbtlog.txt is:

  Not load the parallel driver live

  Did not load driver bios SM service

  Did not load driver SM bus service

  Loaded driver \SystemRoot\System32\Drivers\Cdfs.SYS

  Search:

  c:\Windows\$NtServicePackUninstall$

  Looks like that Service Pack 3 has been installed:

  File: spuninst\spuninst, inf shows:

  NtServicePackVersionText = "Service Pack 3".
  NtServicePackPreviousVersionText = "Service Pack 2".

  Fixed!

  The problem has been updates to lenovo (probably guilty being the video driver that I presume).

  Using UBCD4Win with pointsec plugin I was able

  * Access to the decrypted c:

  * Restored manually updates to c:\windows\system32 and c:\windows\system32\drivers

  Original files have been found in places like: c:\windows\system32\reinstallbackups\008\DriverFiles

  * Finally, I had to roll back updates of the register who did the updates. UBCD4Win offers a tool to do this: the registry Restore Wizard. He basically just look in c:\System Volume Information System Restore directory and lists all the Restore Points available (Fortunately the Lenovo updates mark a restore point until they run). You can also do it manually using the following instructions:

  http://hypography.com/forums/tutorials-and-how-tos/17193-XP-recovery-instructions-for-UBCD4Win.html

  This makes the system successfully booted.

  I've most definitely will be staying clear after you press the big blue button in the future. It was a nightmare to fix.

• sqldeveloper - 4.0.3.16.84 - x 64 crashes after the splash screen

  I had successfully used my installation of sqldeveloper - 4.0.3.16.84 - x 64 last week. After an update to windows 7 enterprise SP1 crashes after the splash screen and about 10% of the progress bar, until the message saying it is saving the extensions. There is no error or other messages of information displayed. I tried to run from a command window produces no additional information. I deleted the sqldeveloper folder and downloaded a zip file and reinstalled. Same behavior.

  

  The Data Modeler works very well.

  Any suggestions on how to do this problem.

  Hi Andy,.

  If the problem is not with the installation of SQL Developer (which you have unpacked in an empty directory) or find the JDK or having a JDK version that is inappropriate, you should then see if your user settings has been corrupted or (maybe) is somehow became less accessible than before the update of Windows 7 SP1.  These settings can be found under C: \Users\-Appdata\Roaming\SQL Developer\system4.0.3.16.84.

  
  

  Here is a compilation of a few standard tips offered several times before on this forum for this kind of situation:

  1 see if behavior persists after the removal of the settings and restart SQL Developer without migrating settings.

  (Be sure to make a backup (export) of your connections first!)

  2. see if (assuming that (1) does not help) allows to reinstall SQL Developer.

  If the fault cannot be placed on a migration of settings / download / installation corrupt, then we can start to consider...

  3. possible problΦmes with older JDK.

  4 OutOfMemory possible problΦmes that may be hidden by running only no Developer SQL from a command line console.

  5. a new bug.

  So try (1) and (2) If you have not already.  Ignore (3) If you are already using jdk7_u51 or later and are not on a Mac.  Point (4) can be a problem if you have many windows to restore and did not mount the Xmx values in the file product.conf - especially if you use a 64 bit JDK.  And (5), if you have the urge, see...

  http://www.thatjeffsmith.com/archive/2012/06/how-to-collect-Debug-Info-for-Oracle-SQL-Developer/

  And if you want to try (1) in a clean 'sandbox' unaffected by existing directories of user settings, you can always add one

  AddVMOption - Dide.user.dir =

  line to your sqldeveloper.conf file.

  Hope this helps,

  Gary

  SQL development team

  P.S.: And keep in mind that SQL Developer "score" to a specific JDK in 4.0 and above all used the SetJavaHome in the product, conf, rather than sqldeveloper.conf

• Constant crash after the last update!

  History is constantly crashing after the last update, I've noticed the logo has changed. If I use a different application then when I click on new in the history in closes unexpectedly. Any ideas? can I roll back? What to know about me? Thanks in advance,

  Mac Pro running 10.9.1

  32 GB of ram

  Intel Core i7

  Member of creative cloud

  Update: this issue is resolved with the latest version of Adobe AIR. Please download and install the most recent http://get.adobe.com/air

• Dreamweaver CS3 crashes after the end of daylight saving time

  In Windows XP x 64, Dreamweaver CS3 crashes after the end of DST. There is a technical note which seems to describe the situation exactly. http://KB.Adobe.com/selfservice/viewContent.do?externalId=kb402776 & sliceId = 1
  
  However...
  
  (1) technical note says that this only happens with ASP and PHP code. I use ColdFusion. (This is a minor point).
  
  (2) technical note said...
  
  Remove the WinFileCache - AD76BB20.dat the Dreamweaver user configuration folder. Note that on Windows, the Application Data and AppData folders are hidden by default, so check that your Windows Explorer folder options are set to show hidden folders. The location of this file is as follows:
  
  Dreamweaver CS3 on Windows Vista:
  C:\Users\[username]\AppData\Roaming\Adobe\Dreamweaver 9\Configuration
  Dreamweaver CS3 on Windows XP:
  C:\Documents and Settings\ [username] \Application Data\Adobe\Dreamweaver 9\Configuration
  
  However, I couldn't find WinFileCache - AD76BB20.dat in Documents and Settings or in Program Files (86) \Adobe. (86, it is because it is a 32-bit program on a 64-bit computer, but everything else is the same). I tried then the two directories for *.dat and there was no file that resembled something like WinFileCache - AD76BB20.dat.
  
  . Can someone help me?
  
  Thank you!
  
  

  Alan, thanks for the suggestion.

  I did the research found the file, deleted it, open Dreamweaver CS3, chose the same text - and it crashed as before.

  THEN I REBOOTED and tried again - no. CRASH. So it seems that a reboot is an essential part of the correction.

  BTW: My situation exactly match the description of the Technote. (1) the accident occurred when selecting - in design view or code - some text in a HTML context involved in the code ColdFusion; (2) I had no problem with these files before DST ended; (3) even after I've not had any problems with them in Macromedia Dreamweaver 8 on another machine - the problem is that the CS3.

  So the TechNote is correct as it will, but should be changed as follows:

  (1) ColdFusion should be included in the types of code that can be associated with the problem.
  2) instead of delete the WinFileCache - AD76BB20.dat, you should delete the WinFileCache-[any] .dat.
  (3) a reboot after the removal may be required.

  Anyway, problem solved.

  Thank you!

• MacBook air crashes after the release of sleep since the upgrade of the sierra

  Began to notice that since I upgraded my macbook air 2015 to sierra, system crashes. The trigger is always when I wake the sleep system (whether it is by opening cover or press a key). Issue is intermittent and may not be reproduced every time. I contacted apple support and they recommended resetting the SMC (ctrl + shift + cmd) but that didn't help either. I also did a check of filesystem (fsck-fy) and which seems to be very well so.

  I noticed others seem to be faced with similar problems and a common theme that I noticed was that both we seem to have an installed tardisk. Not sure if this could be a factor?

  While it is not any loss of data, the question is certainly annoying and disruptive to work.

  The same question was observed at about 7 times since the update of the sierra. Containing the report of Etrecheck to the breast

  #	Date and time
  1	Kills Sep 28 10:03:09 2016
  2	Kills Sep 28 18:13:50 2016
  3	Fri 30 Sep 11:49:16 2016
  4	1 Oct 01:05:15 Sam 2016
  5	Mon 3 Oct 08:05:42 2016
  6	Mar 4 14:26:03 Oct 2016
  7	Sea 5 Oct 11:19:17 2016

  Sea 5 Oct 11:19:17 2016

  Panic report *.

  panic (the appellant 2 0xffffff8004f7316e cpu): initproc is out - output namespace 2 subcode 0xa description reason: no

  News of the UUID:

  0 x 101425000 uuid = < a525eaea-af86-30c2-b360-3d093b4f0828 >

  0 x 100713000 uuid = < 268e1319-a81e-384a-9303-67c26873038a >

  Thread 3 crashed

  RAX: 0 X 0000000000002210, RBX: 0X00007FFFE358C314 RCX: 0X0000700000F06BDB RDX: 0X000000010075DD1E

  RER: 0X0000700000F06B30, RBP: 0X0000700000F06B70, IHR: 0X000000010075C698, RDI: 0X0000700000F06BDC

  R8: 0X0000700000F06BD0, R9: 0X0000700000F06BCC, R10: 0 X 0000000004001080, R11: 0 X 0000000100756188

  R12: 0X000000010075E8A8, R13: 0X0000700000F06BCC, R14: 0X0000700000F06BDC R15: 0X000000010075C698

  RFL: 0 X 0000000000010283, RIP: 0X000000010143B605, CS: 0X000000000000002B, SS: 0 X 0000000000000023

  Thread 0: 0xffffff80108dcdc8

  0x00007fffe36b7456

  Could not read the context 0x0000700000e01cd8 LR

  Thread 1: 0xffffff80108e1748

  0x00007fffe36bf27e

  0x00007fffe3568337

  0 x 0000000000000000

  Thread 2: 0xffffff801558e6f8

  0x00007fffe37a6214

  3 wire: 0xffffff80159b8028

  0x000000010143b605

  0x0000000101441c7e

  0x00000001014297ad

  0x00007fffe358c48e

  0 x 0000000100756188

  0x00000001007265f3

  0x0000000100725ef8

  0x00000001007291cb

  0x00007fffe355a128

  0x00007fffe356fc10

  0x00007fffe3565ad2

  0x00007fffe355c966

  0x00007fffe35709d2

  0x00007fffe3562d41

  0x00007fffe35713bf

  0x00007fffe35741b0

  0x00007fffe37a661f

  0x00007fffe37a6221

  0 x 0000000042000000

  Thread 4: 0xffffff80151f4260

  0x00007fffe36bf4e6

  0x00007fffe37a6221

  0 x 0000000000000000

  Wire 5: 0xffffff8015c45e18

  0x00007fffe37a6214

  Mac OS version: 16A 323

  Kernel version: kernel Darwin in Version 16.0.0: Mon Aug 29 17:56:20 PDT 2016; root:XNU-3789.1.32~3/RELEASE_X86_64

  Kernel UUID: 622D2470-C34D-31F9-A62B-6AA9A3C6A3CD

  Name of system model: MacBookAir7, 2 (Mac-937CB26E2E02BB01)

  ******************************************************************************** *******************************************************

  Mar 4 14:26:03 Oct 2016

  Panic report *.

  panic (cpu 1 0xffffff801817316e appellant): initproc is out - output namespace 2 subcode 0xa description reason: no

  News of the UUID:

  0x1065e4000 uuid = < a525eaea-af86-30c2-b360-3d093b4f0828 >

  0x1055df000 uuid = < 268e1319-a81e-384a-9303-67c26873038a >

  Thread 3 crashed

  RAX: 0 X 0000000000000000, RBX: 0000000000000078 RCX 0 X: 0 X 0000000000000000, RDX: 0X000000000000007D

  RER: 0X00007000061AC868, RBP: 0X00007000061ACCD0, IHR: 0X00007FDF61717C40, RDI: 0X00007000061AC888

  R8: 0 X 0000000000000040, R9: 0X00007FFFE56873D0, R10: 0XFFFFFFFFFFFFFFFF, R11: 0 X 0000000000012068

  R12: 0X00007FFFE5688148, R13: 0X00007FDF6160FAB4, R14: 0X00007000061ACCF0 R15: 0X00007FDF6160FAA0

  RFL: 0 X 0000000000010206, RIP: 0X00007FFFDB52C00E, CS: 0X000000000000002B, SS: 0 X 0000000000000023

  Thread 0: 0xffffff8023eb2be0

  0x00007fffdcad2456

  Could not read the context 0x0000700005fa0cd8 LR

  Thread 1: 0xffffff8023eae260

  0x00007fffdcada27e

  0x00007fffdc983337

  0 x 0000000000000000

  Thread 2: 0xffffff802669e498

  0x00007fffdcada4e6

  0x00007fffdcbc1221

  0 x 0000000042000000

  3 wire: 0xffffff8027112260

  0x00007fffdb52c00e

  0x000000010561051d

  0x00007fffdc975128

  0x00007fffdc98ac10

  0x00007fffdc980ad2

  0x00007fffdc977966

  0x00007fffdc976ee0

  0x00007fffdc976cb7

  0x00007fffdcbc1746

  0x00007fffdcbc1221

  0 x 0000000000000000

  Thread 4: 0xffffff802538d510

  0x00007fffdcbc1214

  Wire 5: 0xffffff802538abb8

  0x00007fffdcbc1214

  Mac OS version: 16A 323

  Kernel version: kernel Darwin in Version 16.0.0: Mon Aug 29 17:56:20 PDT 2016; root:XNU-3789.1.32~3/RELEASE_X86_64

  Kernel UUID: 622D2470-C34D-31F9-A62B-6AA9A3C6A3CD

  Name of system model: MacBookAir7, 2 (Mac-937CB26E2E02BB01)

  ******************************************************************************** *******

  Report Etrecheck

  EtreCheck version: 3.0.6 (315)

  Report generated 2016-10-05 18:58:11

  Download EtreCheck from https://etrecheck.com

  Time 02:31

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer restarts

  Description:

  System of maintains restart with an error "panic (appellant 2 0xffffff8004f7316e cpu)": initproc is out - output namespace 2 subcode 0xa description reason: no ".

  Hardware Information: ⓘ

  MacBook Air (13 inch, early 2015)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Air - model: MacBookAir7, 2

  1 processor 1.6 GHz Intel Core i5: 2 strands

  4 GB RAM not extensible

  BANK 0/DIMM0

  OK 2 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n/ac

  Battery: Health = Normal - Cycle count = 76

  Video information: ⓘ

  Intel HD 6000 graphics card

  Color LCD 1440 x 900

  Software: ⓘ

  macOS Sierra 10.12 (A 16, 323) - since the starting time: 6 hours

  Disc information: ⓘ

  SM0256G SSD APPLE disk0: (251 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Mac 500 GB internal (disk2) / [Startup]: 505,01 (Go 343,25 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 250.14 GB Online

  Storage of carrots: disk1s2 255,52 GB Online

  USB information: ⓘ

  Card reader Apple

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  ~/Library/LaunchAgents/com.example.restart.plist

  sh - c ~/Desktop/TarDiskPear.app/Contents/MacOS/TarDiskPear

  A unknown file found. [Check files]

  Kernel extensions: ⓘ

  /Applications/Kies.app

  com.devguru.driver.SamsungACMControl [no charge] (1.4.31 - 10.6 SDK - 2016-03-01) [Support]

  com.devguru.driver.SamsungACMData [no charge] (1.4.31 - 10.6 SDK - 2016-03-01) [Support]

  com.devguru.driver.SamsungComposite [no charge] (1.4.31 - 10.6 SDK - 2016-03-01) [Support]

  com.devguru.driver.SamsungMTP [no charge] (1.4.31 - SDK 10.5 - 2016-03-01) [Support]

  com.devguru.driver.SamsungSerial [no charge] (1.4.31 - 10.6 SDK - 2016-03-01) [Support]

  / Applications/Parallels Desktop.app

  com.parallels.kext.hypervisor [no charge] (11.2.0). 32581 - SDK 10.9-2016-07-24) [Support]

  com.parallels.kext.NetBridge [no charge] (11.2.0). 32581 - SDK 10.9-2016-07-24) [Support]

  com.parallels.kext.usbconnect [no charge] (11.2.0). 32581 - SDK 10.9-2016-07-24) [Support]

  com.parallels.kext.vnic [no charge] (11.2.0). 32581 - SDK 10.9-2016-07-24) [Support]

  / Library/Application Support/org.pqrs/Karabiner

  [loading] org.pqrs.driver.Karabiner (10.20.0 - 10.11 SDK - 2016-06-19) [Support]

  Launch system officers: ⓘ

  [no charge] 7 tasks Apple

  [loading] Apple 168 jobs

  tasks of Apple 96 [performance]

  Launch system demons: ⓘ

  [no charge] 40 Apple jobs

  [loading] 158 jobs Apple

  Apple tasks 105 [performance]

  Launch officers: ⓘ

  [loaded] com.adobe.AAM.Updater - 1.0.plist (2016-07-15) [Support]

  [cannot] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a2 3d420d.plist (2016-07-13) [Support]

  [loading] com.google.keystone.agent.plist (2016-08-02) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2015-12-25) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-07-13) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-13) [Support]

  [loading] com.google.keystone.daemon.plist (2016-09-02) [Support]

  [loading] com.malwarebytes.HelperTool.plist (2016-09-15) [Support]

  [loading] com.microsoft.autoupdate.helpertool.plist (2016-08-03) [Support]

  [loading] com.microsoft.office.licensingV2.helper.plist (2016-04-11) [Support]

  com.Nalpeiron.NetPro.plist [running] (2016-04-30) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2015-12-25) [Support]

  [loaded] org.pqrs.Karabiner.load.plist (2016-06-15) [Support]

  [loading] org.wireshark.ChmodBPF.plist (2016-07-15) [Support]

  User launch officers: ⓘ

  [loading] com.bittorrent.uTorrent.plist (2015-12-26)

  [cannot] com.example.restart.plist (2016-07-20)

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Agent application of file transfer Android (~/Library/Application Support/Google/Android File transfer/Android File Transfer Agent.app)

  XMenu application (/ Applications/XMenu.app)

  Carabiner application (/ Applications/Karabiner.app)

  Hidden Google Chrome application (/ Applications/Google Chrome.app)

  Hidden KiesAgent Application (/ Applications/Kies.app/Contents/MacOS/KiesAgent.app)

  fuspredownloader hidden Application (~/Library/Application Support /.) WAS / fuspredownloader.app)

  Plug-ins Internet: ⓘ

  AdobePDFViewerNPAPI: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]

  AdobePDFViewer: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]

  QuickTime Plugin: 7.7.3 (2016-09-13)

  JavaAppletPlugin: Java 8 update 101 build 13 (2016-08-07) check the version of

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2016-07-15) [Support]

  MeetingJoinPlugin: Unknown - SDK 10.2 (2016-09-28) [Support]

  User Plug-ins internet: ⓘ

  tblive-4: unknown (2016-10-03)

  Safari extensions: ⓘ

  Adblock more - Eyeo GmbH - https://adblockplus.org/ (2016-09-28)

  iTube Studio - iSkysoft Studio - http://www.iskysoft.com (2016-07-19)

  Open in Internet Explorer - Parallels - http://www.Parallels.com/fr/ (2016-07-24)

  3rd party preference panes: ⓘ

  Java (2016-08-07) [Support]

  Time Machine: ⓘ

  Automatic backup: YES

  Volumes to back up:

  Mac 500 GB internal: disc size: 505,01 GB disc used: 161,76 GB

  Destinations:

  TOSHIBA EXT [Local]

  Total size: 1.00 TB

  Total number of backups: 17

  An older backup: 24/01/16, 02:55

  Last backup: 22/09/16, 17:07

  Size of backup drive: adequate

  Backup size 1.00 TB > (disc 161,76 GB X 3)

  Top of page process CPU: ⓘ

  18% Google Chrome Helper (8)

  8% WindowServer

  6% mdworker (15)

  5% of Google Chrome

  3% kernel_task

  Top of page process of memory: ⓘ

  Google Chrome Helper 655 MB (8)

  631 MB kernel_task

  Mdworker (15) 201 MB

  119 MB Google Chrome

  Console 111 MB

  Virtual memory information: ⓘ

  49MO RAM free

  3.95 GB used RAM (647 MB cache)

  2 MB used Swap

  Diagnostic information: ⓘ

  October 5, 2016, 18:42:55 ~/Library/Logs/DiagnosticReports/QuickLookSatellite_2016-10-05-184255_[redacted] .crash

  / System/Library/Frameworks/QuickLook.framework/Versions/A/Resources/quicklookd. e app/Contents/XPCServices/QuickLookSatellite.xpc/Contents/MacOS/QuickLookSatellit

  5 October 2016, 12:43:53 self-test - spent

  October 5, 2016, 11:19:17 /Library/Logs/DiagnosticReports/Kernel_2016-10-05-111917_[redacted].panic [details]

  October 5, 2016, 11:02:31 AM/Library/Logs/DiagnosticReports/Microsoft Outlook_2016-10-05-110231_ [redacted].cpu_resource.diag [details]

  / Applications/Microsoft Outlook Outlook.app/Contents/MacOS/Microsoft

  October 4, 2016, 14:26:04 /Library/Logs/DiagnosticReports/Kernel_2016-10-04-142604_[redacted].panic [details]

  October 4, 2016, 10:31:37 AM/Library/Logs/DiagnosticReports/Microsoft Outlook_2016-10-04-103137_ [redacted].cpu_resource.diag [details]

  3 October 2016, 11:50:06 AM/Library/Logs/DiagnosticReports/Installer Progress_2016-10-03-115006_ [redacted] .crash

  com.apple.Installer-Progress-System/Library/CoreServices/installateur Progress.app/Contents/MacOS/Installer progress

  3 October 2016, 08:23:05 AM/Library/Logs/DiagnosticReports/Microsoft Outlook_2016-10-03-082305_ [redacted].cpu_resource.diag [details]

  3 October 2016, 08:05:42 /Library/Logs/DiagnosticReports/Kernel_2016-10-03-080542_[redacted].panic [details]

  October 1, 2016, 01:05:15 /Library/Logs/DiagnosticReports/Kernel_2016-10-01-010515_[redacted].panic [details]

  September 30, 2016, 11:49:17 /Library/Logs/DiagnosticReports/Kernel_2016-09-30-114917_[redacted].panic [details]

  September 28, 2016, 18:13:50 /Library/Logs/DiagnosticReports/Kernel_2016-09-28-181350_[redacted].panic [details]

  September 28, 2016, 10:03:09 /Library/Logs/DiagnosticReports/Kernel_2016-09-28-100309_[redacted].panic [details]

  If you have Bluetooth enabled, turn it off before going to sleep the computer.

• Crash after the opening of windows 7 32 bit

  After the opening of firefox mi 27.0.1 I have to wait 1-2 seconds and after that it freezes and mozilla crash report it opens automatically, I tried to choose 'win xp sp3' compatibility and she almoust works, the flash player, that it does not, the icon on the task bar that it flashes, the window of flash player (youtube player) a black and wite quickly switch I tried to reset firefox also! Preobrajensky administrator,

  The most recent report is a problem with the Shockwave Flash plugin.

  • Firefox 27.0.1 crash [@ F1398665248___]

  You can check for problems with the current versions of the plugin Shockwave Flash and try this:

  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)
  • turn off hardware acceleration in the Flash plugin

  See also:

  • http://KB.mozillazine.org/Flash#troubleshooting

• Satellite 1400-104 crashes after the MBR softwarepackage

  Hello

  It is of a Toshiba Satellite 1400-103 (512 MB of memory). On startup, the Satellite works very well, no problems with surfin or broadcast, but when I run a main softwarepackage (such as Macromedia Dreamweaver or MS Word Excel), the PC freezes after a minute or two.
  I feel that the fan suddenly starts turning and the computer crashes. The only thing I can do is turn off taking the startbutton about 10 seconds, then turn it back on.
  I have already reinstalled Windows XP, but the same problem occurs after two weeks. My Antivirusprogramm works very well and I check every week on spyware and software malware.
  Does anyone have an idea about this problem?

  Thank you

  Hi emoreau

  Can you please tell me if there is the same problem without using this software package?

  The cooling fan usually begins to work if the processor speed increases and run under full power. Is this software that you use a complex and superior application?

• Windows 7 keeps freezing during and after the connection

  So for the last two weeks, my computer (a Dell Inspiron with Windows 7 laptop) has been having this problem.

  Whenever I try to start Windows, the computer freezes. Most of the time, I'll be able to connect in the first place and the desktop and the taskbar appears normal, but I won't be able to open all programs. The mouse will have a circle "loading" beside him who won't go away, will not come to the top of the start menu and the taskbar will be completely insensitive. When I move the cursor to the taskbar, the arrow usually turns into a circle of "loading". By pressing Ctrl + Alt + Delete in the meantime does nothing. The only thing I can do is turn off the computer by pressing the power button.

  Sometimes I won't be able to connect at all. The desktop appears as a blank screen, either dark blue or black color. Sometimes the mouse cursor is sometimes visible and sensitive enough to be moved to the screen, sometimes that is not there or completely unresponsive. Whatever it is, there is absolutely nothing I can do when the computer is in this State.  Sometimes the Office does not at all, and I'll be stuck watching the blue 'Welcome' screen until I turn off the computer. Sometimes I can't even that, as the computer crashes as soon as I click on my user icon.

  These problems occur when I connect the guest too account. Sometimes they occur when I try to start the computer in Mode safe, but sometimes (usually after many frustrating attempts), I will be able to log in Mode safe mode normally. (Right now I'm in Mode safe mode with networking.) When I try to log on to the guest mode safe account, it always freezes before connect you or displays a message saying that there is "a mistake with the sense of service" or something like that.

  While in Safe Mode, I tried entering the system setup and turning off some startup programs. Who gets usually the computer working again for a little while, but after a few days problems reactivating. I also tried to do a restore of the system three times, but every time the restore has failed to occur due to errors (do not remember exactly what). The computer began working again after the attempt, but once more, the problems would be just begin again in a few days.

  What causes this problem, and what can I do to solve it for good?

  Hello

  It could be a particularly strong virus or malware. Safe mode, I would run my antivirus software on a deep, boot level scan. If you don't have an antivirus, I use and recommend Avast Free Edition: http://download.cnet.com/Avast-Free-Antivirus/3000-2239_4-10019223.html (only use the Direct download link).

  Other than your antivirus and also run it from Safe Mode, the following malware scanners:

  Malwarebytes': http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html ;  and,

  SuperAntiSpyware: http://download.cnet.com/SuperAntiSpyware-Free-Edition/3000-8022_4-10523889.html .

  Again, use the Direct download link only. Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Windows crashes after the standby or Hibernate mode

  I have win 7 64 bit updated for vista. There have had no problems until now, but in these last days, whenver I sleep or put nohting happends Hibernate my PC, and then I have to start windows in safe mode or in normal mode.

  The pc instead of sleep or Hibernate crasehs.

  Thank you

  KS

  Hello

  you have the STOP code 9F?

  If so, try to download the following patch:

  KB975599 - Stop error message when you upgrade a computer that is running Windows 7 or Windows Server 2008 R2 standby , Hibernate or when you restart the computer: "0x9F".

  Go to following site http://support.microsoft.com/kb/975599 and click on view and request hotfix downloads , select the platform (x 86 or x 64) and type your e-mail twice and type in the captcha ad click request hotfix.

  After 1 minute, you have an email with the link to download an exe file. Use the password is contained in the email to retrieve the update.

  Install the update and restart, now, the problem should be solved.

  If you still crash, download the Minidumps, as already suggested No.Compromise.

  concerning
  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Autonomous Lr6 crashing after the last update?

  Updated standalone Lr6 and now it freezes / crashes with the first click anywhere! Can anyone help? Will there be a clash in the upgrade between CC and autonomous?

  Please back up your Lightroom Catalog by manually copying from pictures/Lightroom on desktop

  Reset then Lughtroom preferences. Reference http://lightroom-blog.com/2015/05/23/resetting-preferences-in-lightroom-cc6/

  ~ Assani