Random screen 'touch' windows 8 pro 64

Similar Questions

• bypassing the Welcome screen in windows xp pro

  I want to bypass the Welcome screen of windows on windows xp pro service pack 3. I tried control userpasswords2 and uncheck and check passwords.  I even tried to disable the Welcome screen.  I tried also even tried to change the type of connection to 0 in regedit, without success. I have 3 icons with no password.  so why is he still playing? Help.  should I delete all my icons connection that has no password.

  Hello
  See this link:
  http://www.Petri.co.il/disable_the_welcome_screen_in_xp_pro.htm
  http://www.Petri.co.il/bypass_the_welcome_screen_in_windows_xp.htm

• Can't change my screen resolution - Windows 8 PRO

  I have computer LAPTOP Compaq Presario A900 in which I installed Windows 8 Pro. After the installation, I'm not able to change my screen resolution. When I right click on the desktop, and then select the screen resolution, it is written in the resolution 1024 x 768 (recommended)box. I can't change the screen resolution. In Device Manager, I tried to update my Generic PnP Monitor driver, it says that your driver is up to date.

  This Device Manager cannot find generic drivers.  I recommend go to the Compaq website and download all the drivers for your model laptop (same drivers you already have, bring here to ensure that you have the latest version of the non-generic), but above all, including the graphics driver.

• Help! -Acer Aspire all-in-one touch screen after upgrade Windows 8 Pro

  Hi all!

  This is a rather confusing questions and about * me off no end!  I know that some of you may have encountered this already and could have a potential solution?

  I have an Acer Aspire all-in-one, AZ5101 (Aspire Z5101), with 4 GB of RAM, etc..

  Since the Developer Preview of Windows 8 came out, I've been running Windows 8 perfectly.  I completely uninstalled (each time itself) and run the following:

  Windows 8 Developer Preview, 64-bit

  Windows 8 Preview of consumer, 64-bit

  Windows 8 Preview, 64-bit version

  In any case, on this PC worked perfectly - y INCLUSIVE of the TOUCH SCREEN.  I never had a problem.

  So far so good.  Then, they finally released updates Windows 8 Pro official licensed by download.  I bought the upgrade and downloaded.  Just like in * ALL * other cases, upgrade, I chose "keep nothing" of the old system (I never really got all the important data on here), and do the upgrade itself.

  After the upgrade was complete, and ALL Windows 8 Pro updates have been applied by Windows update, I have a system where the screen is clear and precise, everything works, and all devices in Device Manager, show the Greens well, it works fine - NO ERRORS.  HOWEVER - NO CONTACT!  No touch no screen function at all.  The screen now has this time as a standard monitor.

  I tried the driver Idéacom - no luck.  Anyone know (please? LOL) how to get the touch screen to work again?  Thank you very much!  I really appreciate any help you can give.  Microsoft technical support had NO idea and no reply emails from Acer! Laughing out loud

  Thanks again,

  Mike

  [edited to conform to the guidelines]

  Hello Mike

  I sent the pilot. Please test and advise.

  Kind regards

  FReeZA

• Windows 8 Pro - blue screen with CPD Watchdog continuing Violation coming

  I just installed Windows 8 Pro four days ago on my new PC (two months) that came with Windows 7.  I randomly get the blue screen with Violation of CPD watchdog, and the PC restarts.  It is very frustrating and never had this problem with Windows 7.

  Also, on my desk, get Ezupdt window warning and I was wondering if it is related?

  Hello world

  Problem solved.  My free version of AVG 2012 was the root cause of the problem.  I was able to get a free through Microsoft consultation as my warranty period of Windows 8 is still valid (less than 90 days).

  Time AVG has been removed, the problem has gone.

• How to list all the users on the Windows 8 Pro welcome screen

  I work for a small company based in the House of my boss of IT services. Because he runs the company, all the computers in the House are on a domain Active Directory (ease of management and control). Because he runs the company from his home, several of these computers are tablets/touch screens for his children, all upgraded to Windows 8 Pro.

  Currently, the default behavior of Windows 8 at startup is to display the Welcome screen showing the last user who opened a session with an option to switch to another user. If "Other user" is selected, a complete login prompt appears requesting a user name and password. This is standard fair for Windows 8, especially on a domain.
  He wants to do me is to find a way to allow a style of Windows XP (workgroup) Welcome screen displaying all the available avatars with user accounts, allowing so a child to click easily their user account and enter a picture password without ever seeing the on-screen keyboard.
  To rephrase: we want the Windows 8 Pro welcome screen to list all the (or specific, if possible) allowing anyone of you users connect to the computer without entering a user name and only enter a password (or picture password).
  I searched the web carefully and it seems that Microsoft can have deprecated this feature in an update of Windows 7 - many people shouting right lose their old welcome screen after an update. I read in the case of registry (removal of corrupt profiles and .default) hacks, security policy settings (interactive logon: do not display last user name = disabled), account policy (control userpasswords2 > uncheck: users must enter a password...) and a few other suggestions that had mixed results, which none apply to the present case , either because the settings are already in place, or because they are not available due to being on a domain.
  I'm open to exploration of any kind of registry or 3rd party software hacks that can provide this functionality. Win8 default behavior is absolutely horrible for tablets - it should be easy for multiple users to connect to a device without using a screen keyboard to enter their username and password. WIN8 is halfway there with passwords of photo, but we still have to enter a user name for all, but the user recently.
  Thanks in advance!

  Hi Jayce Nornin,

  Please be informed that he has no option to list all the users on the Windows 8 Pro welcome screen.

   

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

  Thank you.

• Is there a Windows API that I can use to turn off the touch screen of WIndows 8?

  It makes sense for a Tablet have a touchscreen. A valve system, I would like to live without a touchscreen.

  I would like to disable the touchscreen disabled if a machine is not in tablet mode. However, I can't find any API to do it on Windows 8. in Windows Mobile, there are APIs such as DisableTouch and EnableTouch. I wish I had such somethings on Windows 8 Pro. When the touch screen is disabled, the OS will never be aware of activity on the touch screen.

  Is anyway to do this?

  Thank you

  Youssef

  Hello

  It seems that you want to disable the touch screen on a Tablet using the C++ programming language. I suggest that you post your question in the MSDN forums. The community on these forums is more experienced to answer questions related to the programming language.

  Here is the link for the same thing. Thank you.

• TouchSmart pilot: screen touch need DRIVER TouchSmart PC HP TouchSmart 520-1018 compatible with 64-bit Windows 8.1

  Hello and Hello

  I have a PC while HP is since I install my touchscreen 8.1 Windows does not
  and I can't find the driver touchsmart

  It is for this reason that I appealed to you to help me because I'm not even the only this brand PC with this PROBLEM AND the TACTILE SCREEN and television

  Screen touch need DRIVER TouchSmart PC HP TouchSmart 520-1018 en all-in-one, compatible with 64-bit Windows 8.1

  Here's the Ref: my PC HELP Please help me

  Driver name * * USB hardware TouchscreenIdentifiant-VID_1926 & PID_0DBE and REV_0008 & MI_00
  HP TouchSmart 520-1018 en desktop, all-in-one, serial number: CZC2100L4G
  Model: H0N17EA
   
  Hewlett Packard Max resolution: screen size 1920 x 1080: 23.1 "(51 cm x 29 cm) Production date: 31/12/2001 Aspect ratio: input type 16: 9 video: digital signal DisplayPort"

  is its lack and I can't find the download I search the Web without result.
  HP Forum, Microsoft forum, Forum Intel people can help me it's incredible that my PC this compatibility issue with 64-bit Windows 8.1 is said to go arriera on Windows 7, I have to buy Windows 8.1 for 119 Euros at Radio Shack, and the seller told me it was compatible with my pc Touchsmart 520-1018 fr.
  What a rip off we are selling a PC, software that is not compatible and is capable of people is the manufacturer explained why or how? and help.
   
  Thank you for help or the answer

  sincerely

  ***********************************************************************************************************

  Hello

  I United Nations PC all in one HP, is since I install Windows 8.1 my touch screen works like
  and I can't find the driver touchsmart

  It is for this reason that I appealed to pay you help me I'm like not even the only one that this brand of PC with this PROBLEM of with TOUCH SCREEN AND and TV

  Screen touch need DRIVER TouchSmart, PC HP TouchSmart 520-1018 all-in-one, compatible with Windows 8.1 en 64-bit

  Here's the ref: my PC HELP me please help

  Driver name * material TouchscreenIdentifiant * USB\VID_1926 & PID_0DBE & REV_0008 & MI_00
  Computer HP TouchSmart 520-1018 en desktop, all-in-one, serial number: CZC2100L4G
  Model: H0N17EA

  Manufacturer: Hewlett Packard maximum Resolution: 1920 x 1080 screen size: 23.1 "(51 cm x 29 cm) date of manufacture: 12/31/2001 of aspect Ratio: 16: 9 type of video input: signal digital DisplayPort"

  Its who miss me and I can't pour download I searching the Web without result.
  HP, Microsoft forum forum, Intel Forum people can help me this is like not even amazing that my Pc has this problem of compatibility with Windows 8.1 64-bit is told me to come back in arriéra on Windows 7 I buy Windows 8.1 pour 119 Euros at radio SHACK, and the seller my well said it was compatible with my pc Touchsmart 520-1018 fr.

  What ripoff on sells PCs and software which not compatible son and people is capable of this is company LABELTEX of music why or how do? and accomplice.

  Thank you for help or an answer

  CDL

  Hello

  > Shut down the computer and enter the Diagnostic screen

  > by pressing the F2 function key during startup

  > test the touch screen - if all of the boxes to pass the test problem solved

  > before going to this update of pease support HP support and udate it

  > so bad u get the opportunity to make a touchscreen test

  > issue trouble be solved: bravohelen

  Troubleshooting of touch screen in Windows 8

  Please click on "Accept as Solution" If you feel my post solved your problem, it will help others find the solution.

  Click on the 'Congratulations, Thumbs Up' at the bottom right to say 'Thank you' for helping to!

• Windows XP Pro SP3, screen saver does not login / welcome screen.

  Windows XP Pro, SP3

  Recently made a clean installation fees.

  Now, every time the logon / Welcome screen, screen saver will not invoke after the specified time-out period.

  If the computer is on any other screen, a screen saver will call after the specified time-out period.

  I can't understand why the screen saver will invoke is no longer when the connection / welcome screen appears.

  If anyone has any input on this, I would appreciate it.

  Thank you.

  Hello DavidHarris00009,

  The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• my Windows xp pro computer was working fine, but after five days, when I stat from my computer I could show only the information of the bios on the screen and then the screen freezes

  my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply frozen. I couldn't start my computer. I have a lot of data in my hard drive. What can I do to start computer or recover my data?

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors, then your RAM is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• ""(Print Screen) print Scr key does not work is not in Windows XP Pro - (no LOCK "F") "."

  I have Windows XP - Pro.  The "Print Scr" button does not work and niether is the combination of keys 'Alt + P'.  My keyboard is not an "F LOCK" / key "F Lock feature" because it has a "Num Lock" key  There's no other keys on my key Board that suggest even a '___Lock' of any kind.  If not, how can I get this feature.  Oh... and one more thing, Microsoft/people sending responses to others, here, to "Social responses" can you try to be a little more specific with what you're talking about?  As your knowledge is greatly appreciated by many, many of us are unfamilliar with computers and have NO idea what you're referring to.  When Microsoft did not find something or is just lazy to do so, he advises people to "ask the administrator of the computer.  I'm the "computer administrator", but I'm inexperienced! How does it work?  Thank you all.

  On Saturday, August 14, 2010 12:57:22 + 0000, Firstname, Lastname2 wrote:

  I have Windows XP - Pro.  The "Print Scr" button does not work

  In the days of DOS, the print screen button to print the screen. But
  in all versions of Windows, it works differently and the name of
  the key is now an anachronism. The key is not to print the screen.
  PrtScrn captures the entire screen and Alt-PrtScrn captures activate
  window.

  Either a capture of the image in the Windows Clipboard. Once it is in
  the Clipboard, you can paste (Ctrl + V) into any application that
  supports graphics (Windows Paint, other graphics software, even your)
  favorite text processing). You can change or add to the image you
  like, then print it out.

  This ability to manipulate the image in a program before printing
  is an improvement on the original method of printing the whole back.
  But if you like that old return facility, there are several
  freeware/shareware programs from third parties which can do, such as
  PrintKey2000 to
  http://www.Sharewarejunkies.com/00zwd2/printkey2000.htm

  Ken Blake

• Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix? __

  Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix?

  In the Task Manager, click on "File" and select "new task (run).

  Type explorer.exe, and then press the ENTER key.

  If you are able to connect successfully to the windows, scan the entire computer using updated anti-virus software and check the virus.

• PCI.sys blue screen during the installation/repair Windows XP Pro

  My computer has been invaded by the virus, and they have corrupted my system files until I can start only in safe mode. I tried to repair Windows XP Pro using the installation CD, and I am getting a blue screen with the PCI. SYS on it. It has been set to boot from the CD, and it was.

  Also, I have already installed Recovery Console, and the computer is a Windows XP SP2 with the plant material. I did a CHKDSK on it and looks very good.

  Oops. just a simple driver issue. I started in the last known good config and had no error. I uninstalled the driver and got the suitable driver for my laptop. Sorry for the inconvenience!

• New hard drive, installed Windows XP PRO version 2002 - resolution screen and internet problems

  My Dell has had some problems (patially due to age), so a buddy of mine and I put a new hard drive in it and then installed windows XP Pro.  Installation went great, but now that it's installed, I can not get the screen resoultion to change and I can't connect to the internet.  I feel like with the internet, can I have a driver problem.  I know that the internet works, I'm on it with the laptop right now.  Any suggestions?

  ????  I'm not sure I understand your question. You download the drivers to a place, you will find them, as the office. If you want to put them on a USB stick, copy the files downloaded to the key and take it to the computer target. Copy the files on the computer desktop. Double-click on a file and it will unpack the installation routine starts. Follow the installation wizard. Reset when said to repeat as needed until all the drivers, etc are installed. Subsequently, you can delete the downloaded files from Dell (from installation .exe). MS - MVP - Elephant Boy computers - don't panic!

• My Windows XP pro would not let me change the option 'Use the home screen', so I removed a vital .dll file. I can't start Windows now!

  My Windows XP pro would not let me change the "Use welcome screen" option under: user accounts/change the way users connect or power off.

  He gave a message to the effect (I forgot to write it!) "a recently installed program does not change this setting. Search in the file named "RtlGina2.dll for a clue. So as silly as I can be, I did a search, finds the file RtlGina2.dll in the Windows/System32 folder and cut and paste on my desk. My thought was to isolate this file to see if it will address the problem of not being able to change the option use Windows screen.

  Now, I can't run Windows! It gives a message that this file RtlGina2.dll is not found! Specifically, it says, User Interface failure. The UI for logon RtlGina2.dll DLL failed to load. Contact your system administrator to replace the DLL or restore the original dll.

  How can I replace the dll if I can't even get started? Help, please! I know just enough to get me in trouble I see.

  WyoPathfinder,
  Are you able to boot mode safe mode with command prompt?  If Yes, then you can search for the file "dir /s /a RtlGina2.dll" lists the location where you moved to.  Then you can just copy (path\filename) c:\Windows/System32\(filename)

  If you do not work in safe mode, then you can boot from a XP disc and go into the recovery console and do the same thing.

  Hope that helps. QQ learn manage!