Random stop into sleep/hibernation mode

Similar Questions

• System goes into sleep/hibernation mode suddenly; sometimes THINKPAD Sun splash screen

  I have a type-7EU, put T61P 6460 updated since the original factory with Win 7 and a Corsair SSD.  This problem occurred months after these upgrades.

  Problem as a whole seems to be displayed in many ways, so I don't know what the root cause and whether or not the system can be repaired.

  A few weeks ago, I found that I could not resume after sleep or Hibernate mode.  The system would start to recover, but the screen turns off and the "half moon" icon lit up.  However, instead of going completely to sleep, it seems to begin to restore once again, because the caps lock num lock light flashes and the DVD player would be 'would click,' as they do when first starting the system.

  In other situations, when I first tries to start, the ThinkPAD splash screen is very low.  This happens until I see Win 7 menu to select Win7 or an older operating system to start.  Once I selected Win 7, the screen flashes between normal and total brightness black during the boot process. Usually, the system never ends completely to where I can connect to Windows.

  Or, I can work after 5 minutes or an hour away, and then the system suddenly goes to sleep

  Sometimes, I noticed that the vent near the upper left corner of the system is very hot.  But then I got this problem starting even when the system is off all day and probably cold.

  Alternatively, I can work all day without any problems.

  Can anyone advise on what could be the problem?  I'm looking at a motherboard replacement?  If so, is it possible to buy from an eBay seller?  Any recommendations?

  OK guys, I don't know whether to apologize or grin because I came across a solution.

  I'll try to answer all the answers to this one message.

  I already downloaded the manual equipment, because about two months ago the screen on my T61p cracked badly, during a business trip.  Not good.  And in the coming days, the crack has continued to worsen.  When I got home, I find this manual and did an eBay search to find a replacement screen.  I also find a video on YouTube that shows how to disassemble the 'lid' (once removed from the main system) to change the screen. That everything worked well, except that it took several hours longer than I expected.  Going to pull apart the main system, I removed the wind and the heat sink and blew all the dust.

  The way I solved this problem in all its manifestations, was to RESTORE control Plan for the Plan of power to all of the default values.  I had been playing with some advanced settings and noticed that some advanced settings settings did not share the same parameter values for the Basic setting, things like sleep and will point.

  I can't that speculate that there are a few subtleties modes ensure Intel CPU, which can be programmed for Windows and are persistent through a reset or even a full stop. And I can also speculate that between Windows and the BIOS T61p, there are a few bugs in the way that these settings are configured.

  In any case, once I did the reset to use, I can put my system to sleep or hiberate or close windows and the system still restarts when necessary.  I can also put my system to sleep by closing the lid of the screen and restart opening the cover.

  Everything is good again, and I didn't have to spend the $$$.

  Also, there are several months I upgraded to 8 GB of memory, of using a Crucial element.  Works very well, and I noticed that my MS Office apps now run faster, like Windows (64-bit).

  This is therefore an envelope, I think that, as they say in Hollywood.

  Phil

• external unknown device after device, hard drive or the printer goes into sleep/hibernation

  I guess that the problem occurs when each device goes into sleep/hibernation because this is happining to only my external hard drive and printer.  All other devices connected by USB have never no problem and will not go to standby or Hibernate. Difficulty I should close down then cold restart without connected device. then after the system is installed and running reconnect the device then it is recognized and works. I tried to just the printer powerdown (cables power and usb for printer peripheral but comp still running while still not recognized after that repower printer and then usb connection get 'unknown device'.)  The only way to obtain a recognized device, DHM or printer is as above full stop and then reconnect.  Any help would be greatly appreciated because it really is a pain and has cost me a printer that I threw out the window, luckly the window was open.  Thanks again for your time and your help very frustrated JK

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest for the link and try to run the Troubleshooter:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2:

  Try to update the device drivers and check if it helps:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Check out the link for more information:

  Looking for drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista

  Method 3:

  I suggest you to disable and re-enable the USB controllers:

  a. click Startand then click run.

  b. type devmgmt.msc, and then click OK. Device Manager opens.

  c. expand Bus USB controllers.
  Note: You need to scroll the list to find this point.

  d. right-click the first USB controller under USB Bus controllersand then click Uninstall to remove it.

  e. Repeat step 4 for each USB controller is listed under Bus USB controllers.

  Note: restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  Let us know if it helps.

• Satellite L50-B-1HU randomly goes into sleep mode

  Randomly, my laptop (Satellite L50-B-1HU) goes into sleep mode.
  It happened at least 10 times in the last two weeks.

  Once by chance, he goes to sleep he requires the power button to turn, but the power button should be 1 to 3 times, as it can to sleep just after pressing the power button.

  Its happen even if the pad is in use. In windows power options, I turned also to disable the mode 'sleep'.

  The laptop itself has been used for two weeks (which has passed since the first use)

  Any advice?
  Thank you

  Like Notepad running in the power of the battery or also using the power adapter plugged?
  From my point of view of a few notebook could enter the mode "sleep" due to low battery.

  Also some 3rd party application preinstalled on the laptop could set the camera in mode "Eve".
  Guess what: try to start the laptop is safe mode and let it run for a longer period of time. It would be interesting to know if the laptop would be access to the sleep mode using safe mode.

  You can also use the command "powercfg. Windows 8 PowerCfg has a useful switch called - energy.
  This technique is valuable to solve sleep problems.
  Start the console with the command: cmd.
  In the console type: powercfg-ENERGY

  Now it takes 60 seconds and will create an HTML file that you can open in your web browser to get the full report of energy. Now quite sure if the information could be useful, but it might be interesting what details this report would provide.

• Tecra A9 - network does not work after wake up from the sleep/hibernation mode

  I have TECRA A9 and it works fine, but I found that when computer portable GB extended standby/sleep mode and after the return to work on the laptop to the network not working not.
  Keep it light, but there is no network and to solve it, I need to restart the laptop.

  Any help please.

  Kind regards.

  This is a known issue so take a look at this site:
  http://APS2.toshiba-tro.de/KB0/TSB8902FC0000R01.htm

  Updated the BIOS, and then it will work.

• Pavillion g7 goes into reboot hibernation mode

  I have a wm Pavillion G7-1329 old 2 years with Windows 7. I use Windows antivirus and firewall for spyware with Malwarebytes. I've noticed recently, when I download or update anything, instead of restart as before, he hangs up and after about 5 minutes, he goes into hibernation and will not come out of it.

  I have to make a strong power off.

  I made a couple of restore points, but this does not solve the problem.

  I use a fan to avoid overheating, although he still hot enough.

  Is there anything else I can do to fix this?

  Thank you

  Jan

  Hey daytonajan,

  It's always nice to see a resolution! If you want to help others to find resolutions to similar problems using the Kudo and acceptable Solution buttons. This increases the traffic to the post, which makes them easier for others to find.

• My work computer Dell, Windows 7 locks when coming out of sleep/hibernation mode.

  In order to get on the "locked mode", I have to remove ALL power to include battery, and then restart the computer.  Any thoughts?

  I guess that Windows Update works fine on your PC.

  Hardware devices are part of that Windows requires to function, these devices are examined by Windows as soon as it starts so they could explain your hibernation problems.

  See the errors related to the Description Code 10, which generates the Device Manager in Windows computers

  I expect that the Dell LAN driver download, then install them would solve the problem.  Dell driver downloads are exe files that you run to install them.  This facility is expected to replace whetever causes them to malfunction unless, of course, the material itself is faulty in which case you should check in your BIOS disable them so that Windows doesn't bother checking them.  To enter your BIOS, press F2, as soon as the Dell logo is displayed during startup.

• Satellite U300 doesn't wake up from hibernation mode

  Hello

  I was wondering if someone can help me,

  I have problems with my brand-new Satellite U300.
  When it comes into sleep/hibernation mode I can't have to reactivate.

  The power led remains blue. In the order of UDE the laptop I have to turn the power off completely and then re-boot.

  How can I stop this from happening?

  Thank you

  Hello

  I think you should try to update the BIOS.
  On the European driver Toshiba page, you will find compatible drivers and BIOS.
  Then first try to update BIOS and then check if it helps.

  Good luck

• Then the computer file transfer goes into sleep mode

  Original title: stop windows sleep/hibernation

  I need to transfer files from my PC to laptop. However when idle and waiting transfer via network lan my laptop will be slowed down and complete the connection. How can I stop this? Running Windows 7

  Hello

  
  Perform the steps to disable sleep and hibernation below and check if the problem persists.
  
  a: start Power Options of Type in the search box and click on enter.
  b: Now click on change plan next to Balanced (recommended) settings.
  c: now click on change advanced power settings.
  d: Now, Expand sleep option and then under sleep after and Hibernate after, set this parameters Never
  e: then click on apply.
   
  Also check out the following link
   
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions 
  
  Hope that helps.

• Windows crashes when you use any application and stops in hibernation mode

  Hello people who might be able to help me,

  I come back from summer vacation and turned on my computer with windows 7 at first all seemed fine until I wanted to open an application. Opening was always very well, but when I did something on this subject, it crashed. Also my PC then stops in the hibernation mode. I can access internet, but nothing else. Then I tried to recover my PC. It turns out I have no recovery points and can only restore factory mode that sucks. Now that was new, since always, before I could restore my PC to a previous session without making any restore points. What can I do to restore my PC and ban these errors?

  Hello Nicolas,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1 did you receive no error message or code when the application or the system crashed?
  2. What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because settings to corrupt, or because of the presence of unused files in Windows. This can also occur due to the presence of any virus or malware.

  I appreciate the fact that you want to restore your computer. However, until you do, I suggest you to try the following methods and check if it helps.

  Method 1:
  Resolution of performance problems and check.
  Reference:
  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Please also run convenience store power.
  Reference:
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Microsoft safety scanner run and check the issue.
  Reference:
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Satellite U300-144 does not come from the standby/hibernation mode

  Hi, can anyone help?

  I have a new Satellite U300-144 accompanying the Vista home 32-bit preinstallation. I have a problem, he wants to come to the sleep/hibernation mode, and my clear blue power is always on standby/hibernation mode. I hold the power button to restart the computer and then I get a message of illegal closure because I don t shutdown right.

  I tried to upgrade the BIOS later for my model and the n t the problem, then I tried to upgrade to Vista Ultimate t doesn't help either. I installed all the drivers and everything works real well.

  A colleague using me U300 Office. I asked him to check the extended sleep/standby option and he reported that everything works correctly. He always uses the factory settings and only one update is added value package. He kidnapped the former and installed latest version of the Toshiba download page.

  Have you installed latest PPVS too?

• Computer into Hibernation Mode to randomly

  I have recently (by recent, I mean during the last 2 months) has started having a problem with my laptop. I'll either watch a video, listen to music, compilation of the source code, or edit my Web site, when my computer screens goes black, and just the computer stops responding. He will be sitting like that for about 5-10 minutes and then go into hibernation mode...

  When I press the power button to restart the computer from the Hibernate mode, my session is displayed again, but is not my last session. (ie. the session is one of 30 minutes before the computer had his number)

  I have a HP Pavilion dv200 (Intel Core 2 Duo CPU [T5250 1.50 GHz by heart], 2.00 GB RAM, 32-Bit, Windows 7 Home Premium SP1).

  The computer is coming over 8 years old next February. Initially, it came with the Windows Vista operating system.

  Here are some other things to note:

  There are has no magnets w / in a radius of 20 ft of the computer. I ran multiple analyses complete antivirus, with MSSE (Microsoft Security Essentials) and some other 3rd party antivirus they all return any malicious files. I have rebuilt the computer 3 times, and the problem persists. My power plan is configured with the balanced option, and all levels of power are the default. I tried to disable the completely hibernation mode, and the problem still occurred. Java is updated and works well, like my .NET framework.

  The software that I run most commonly is listed below:

  Visual Studio 2012 Professional Edition

  Visual Studio Express from 2013 for Windows desktop

  Microsoft WebMatrix

  Command prompt

  Internet Explorer

  Notepad ++

  Windows Explorer

  Eclipse

  Paint.NET

  The question is a bit annoying, because I can't understand what it is.

  Help, please.

  Hello

  I'm sorry for my late reply.

  Thank you for your update on the issue.

  Do you have any program of third-party anti-virus installed on your system?

  Third-party antivirus firewalls block the network connection and could be a major cause of the issue. So, if you can install your favorite antivirus installed on the system again, I suggest you to completely uninstall the anti-virus program with its removal tool, temporarily to see if the problem persists. Find your relevant removal tool, please see this link by Stephen Boots responded March 21, 2012:

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_start/list-of-anti-malware-product-removal-tools/407bf6da-C05D-4546-8788-0aa4c25a1f91

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  After return your results for assistance.

• Touchpad stop going into hibernation mode. transfer of the apps

  Hey all, I just got my Touchpad a week ago and I used to power press and hold the power button and he'd jump a menu to stop the machine, but that stopped working? Now when I hold the power button, it will just in hibernation mode. I have to go into settings, info on the device, etc. to shut it down. I was wondering if anyone else has had this problem? I think the Exchange I have 14 days, but I then buy all the apps I bought? Not a happy camper right now...

  Make a post on this forum

  http://forums.Palm.com/

• What printer goes into sleep mode computer stops

  just got a hp7520 as a gift. updated from xp to 7. If the printer goes into sleep mode, the computer shuts down.  currently I'm keeping the printer in demo mode so that it does not expire.  Anyone know how I can use printer without him turning off the computer in normal mode?  I talked about Noone has even heard of that happening.  I hope someone can help. Thank you!

  Hi @JNBLanocha

  My stomach says mt that perhaps you have the printer USB cable connected to a USB 3.0 port on your computer instead of a 2.0 port. The image below is some examples of 3.0 ports.

  

  3.0 ports are supposed to be backwards compatible, but I've seen questions arise.

  I wonder if the cable you are using is the computer and causing problems pulling power. All I can do at this stage is to assume and to gather information. Please post back with the answers to the following questions;

  1. You have a USB connection
  2. If the USB is connected, you use a 2.0 port or 3.0?
  3. Again, if you use a USB connection type, have you tried another USB cable? It could be a cable problem.
  4. You put XP or you remove XP and install Windows 7?
  5. You have your printer connected directly to a power outlet, or you are using a power strip/bar, or a surge protector?
  6. Now this may sound silly, but you have a timer on your computer, such as the hibernate after so many minutes and maybe the computer and the printer are set at the same, it is possible the moment closures / sleep coincide.

  I look forward to hear from you and to work towards a solution.

• Photosmart WSP 5514 stops my Dell Vista desk top of page 68 to go into sleep mode

  My photosmart 5514 is set up wireless.  When I try to put my Dell desk top with Vista Home Premium 68 pending, I get a message that the driver for the WSP device prevents goiing pending and I am encouraged to communicate with the manufacturer which is HP.  I also have a problem that the scan function can only scan to my laptop and not on my desk even if both are on the same network I don't know if the two probs are related.  I tried several times to update or reinstall the drivers from HP website of HP and from the drive.  The issue (s) outstanding. I can bypass the prob of scan but not the prob of sleep.

  Hi DanToz

  I understand that the port is set to WSD, is that correct?

  I have provided a document to print the configuration page to find out the IP address of the printer.

  You have full administrative rights on this computer?

  The HP 5510d is the series so that's fine.

  If you cannot create a new port on the ports tab, then you probably don't have administrator rights on this computer.

  You would have to contact you with the it Department to be able to do then.

  You need TCP/IP port port.

  You turn off the printer to see if the computer goes into sleep mode?