Randomly - blue screen BCCODE - 1A - help

original title: random BSOD - BCCODE - 1A - help

Hello

Im getting random bluscreen of questions on my asus laptop. The dmp file produced by windows includes the following information:

Bug Check String: MEMORY_MANAGEMENT

Bug check code: 0 x 0000001 has

Caused by the driver: ntoskrnl.exe

Caused by the address: ntoskrnl.exe + 70740

Operating system: Windows 7 (x 64)

CPU: x 64

Can you give me a hint on what could be the problem?

Tanks in advance for your support.

Hello

Might want to take a look at the slot the wire going through the same problems as you:

http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/71ae0ae9-EC94-4620-9708-65a2ff2f20aa

Tags: Windows

Similar Questions

Gel system and random blue screens of death, help!

Hi all

I'm hoping to get help with my system. TI all started since I installed a new video card, or at least, that's when I think it all started. I went to a Nvidia GTX 260 to a 750 from Nvidia and the problems seemed to start from there.

Since I put the 260 in however problems only got worse.

I scanned my system for malware, and I also ran CCleaner without result.

Here are my system specs:

AMD processor with Six cores (tm) - 6100 FX 3.30 GHZ
RAM: 8.00 GB

Windows 7 Home Preemium - SP1

64 bit

On the BSOD I became IRQL not less or equal, but has not been able to take a picture of it in time. I also got planner of video with BSOD, memory management. (See attached pictures)

As I said before I'll sometimes get a BSOD but the system just hangs and what is on the screen will just stay there and nothing to move or respond to all.

I also ran memtest86 and took photos of the results after an hour, eight hours and 24 hours. (See attachment)

I uninstalled and reinstalled several times video card drivers thinking that could be the problem, but it does not solve too anything.

I'll post my files minidmp in a few minutes.

Here is the link to photos of the errors. http://share.PHO.to/4tTvj

Raff

Two of the crash dumps point for Creative SB Audigy LS or any device connected to it. Start there.

Then update or remove all other drivers listed below, which some shouldn't beon your system because of their history of causing BSOD Windows 7

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0XA

Nom_processus: audiodg.exe

Failed to load image \SystemRoot\system32\drivers\P17.sys, 0n2 error Win32
WARNING: Unable to verify timestamp for P17.sys
ERROR: Module load completed but symbols can be loaded for P17.sys
Probably caused by: material (P17 + 49 86 c)

Follow-up: MachineOwner

--------------------------------------------------------------------------------------------------------------

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access an address pageable (or completely invalid) to a
application interrupt level (IRQL) that is too high. It is usually
caused by drivers using a wrong address.
If the kernel debugger is available, get a stack backtrace.
Arguments:
Arg1: 000000003f0000c3, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff880084a1c86, address memory

Debugging information:
------------------

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff8000310e100
000000003f0000c3

CURRENT_IRQL: 2

FAULTING_IP:
P17 + 49 c 86
fffff880'084a1c86 100410 byte ptr [rax + rdx] adc, al

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0XD1

Nom_processus: wmplayer.exe

TRAP_FRAME: fffff88003262c10-(.trap 0xfffff88003262c10)
NOTE: The frame trap does contain not all registers.
Some registry values can be set to zero or incorrect.
Rax = 00000000000000c 3 = 0000000000000000 rcx = 00000000003f0007 rbx
RDX = 000000003f000000 rsi = 0000000000000000 rdi = 0000000000000000
RIP =fffff880084a1c86 rsp = fffff88003262da8 rbp = fffffa80093d0588
R8 = fffffa80099f1ef4 r9 = 0000000000000100 r10 = fffffffffdfd1cc0
R11 = fffffa8006ff088c r12 = 0000000000000000 r13 = 0000000000000000
R14 = 0000000000000000 r15 = 0000000000000000
iopl = 0 nv up ei pl nz na po nc
P17 + 0X49C86:
fffff880 '084a1c86 100410 byte ptr [rax + rdx] adc, al ds:00000000' 3f0000c3 =?
Reset the default scope

MISALIGNED_IP:
P17 + 49 c 86
fffff880'084a1c86 100410 byte ptr [rax + rdx] adc, al

LAST_CONTROL_TRANSFER: from fffff80002ed6169 to fffff80002ed6bc0

STACK_TEXT:
fffff880 '03262ac8 fffff800' 02ed6169: 00000000' 0000000 a 00000000' 3f0000c3 00000000'00000002 00000000'00000001: nt! KeBugCheckEx
fffff880 '03262ad0 fffff800' 02ed4de0: fffffa80 00000000'00000000 00000000'00000000 ' 0a 013000 00000000'00000003: nt! KiBugCheckDispatch + 0 x 69
"fffff880 ' 03262 c 10 fffff880 ' 084a1c86: fffffa80 '0987d0d8 fffffa80' 078a 6310 fffff880'08496900 00000000 00000000': nt! KiPageFault + 0 x 260
fffff880 '03262da8 fffffa80' 0987d0d8: fffffa80 '078 a 6310 fffff880' 08496900 00000000 00000000' 00000000' 00000000: P17 + 0x49c86
fffff880 '03262db0 fffffa80' 078a 6310: fffff880'08496900 00000000'00000000 00000000'00000000 00000000'00001800: 0xfffffa80'0987d0d8
fffff880'03262db8 fffff880'08496900: 00000000'00000000 00000000'00000000 00000000'00001800 fffffa80'078 has 6310: 0xfffffa80'078 has 6310
fffff880 '03262dc0 00000000' 00000000: 00000000'00000000 00000000'00001800 fffffa80 '078-6310 fffffa80' 098ac020: P17 + 0x3e900

STACK_COMMAND: kb

FOLLOWUP_IP:
P17 + 49 c 86
fffff880'084a1c86 100410 byte ptr [rax + rdx] adc, al

SYMBOL_STACK_INDEX: 3

SYMBOL_NAME: P17 + 49 c 86

FOLLOWUP_NAME: MachineOwner

DEBUG_FLR_IMAGE_TIMESTAMP: 0

MODULE_NAME: material

Nom_image: hardware

FAILURE_BUCKET_ID: X64_IP_MISALIGNED_P17.sys

BUCKET_ID: X64_IP_MISALIGNED_P17.sys

Follow-up: MachineOwner

ffff880 '08458000 fffff880' 085d 7000 P17.sys P17
Loaded symbol image file: P17.sys
The symbol file: P17.sys
Image path: \SystemRoot\system32\drivers\P17.sys
Timestamp: Mon 03 August 07:11:59 2009 (4A76C5FF)
CheckSum: 0014239E
ImageSize: 0017F000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Driver Description: Creative SB Audigy LS

Driver update site: http://support.creative.com/Products/product_list.aspx?catID=1&CatName=Sound+Blaster#.

--------------------------------------------------------------------------------------------------

If possible update

fffff880'0270 b 000 fffff880'0276 d 800 ladfBakerCamd64 ladfBakerCamd64.sys
The symbol file: ladfBakerCamd64.sys
Image path: \SystemRoot\system32\DRIVERS\ladfBakerCamd64.sys
Timestamp: Fri Mar 18 20:10:23 2011 (4D83F46F)
Checksum: 00066C 44
ImageSize: 00062800
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e

Description of the driver: Bard filter driver

Driver update site: http://www.Logitech.com/en-us/support-downloads?selectedcrid=0&selectedcid=0&WT.z_sp=product&OSID=&bit=

--------------------------------------------------------------------------------------------------------------

See if you can update.

fffff880 '0875-000 fffff880' 0875dd80 LGBusEnum LGBusEnum.sys
The symbol file: LGBusEnum.sys
Image path: \SystemRoot\system32\drivers\LGBusEnum.sys
Timestamp: Thu Nov 23 20:36:48 2009 (4B0B38B0)
CheckSum: 0000B99B
ImageSize: 00003D 80
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Description of the driver: Keyboard Logitech

Driver update site: http://www.Logitech.com/en-us/support-downloads/downloads

--------------------------------------------------------------------------------------------------------------

See if you can update

fffff880 '049 d 2000 fffff880' 049d LGVirHid LGVirHid.sys 4480
The symbol file: LGVirHid.sys
Image path: \SystemRoot\system32\drivers\LGVirHid.sys
Timestamp: Thu Nov 23 20:36:48 2009 (4B0B38B0)
CheckSum: 00012CDE
ImageSize: 00002480
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Description of the driver: Logitech Gamepanel Virtual HID device driver

Driver update site: http://www.Logitech.com/index.cfm/support_downloads/downloads/&CL=us, fr.

--------------------------------------------------------------------------------------------------------------
probably, Logitech, but I couldn't find any info.

fffff880 '049 c 0000 fffff880' 049d 2000 LxrSII1d LxrSII1d.sys
The symbol file: LxrSII1d.sys
Image path: \? \C:\Windows\System32\Drivers\LxrSII1d.sys
Timestamp: Thu Dec 21 13:43:13 2009 (4B2FC1C1)
CheckSum: 0001BAC4
ImageSize: 00012000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

--------------------------------------------------------------------------------------------------------------

fffff880'0d76d000 fffff880'0 RTCore64 RTCore64.sys 773000 d
The symbol file: RTCore64.sys
Image path: \? \C:\Program files (x 86) \EVGA X\RTCore64.sys Precision
Timestamp: Mon Mar 11 01:32:06 2013 (513D6C56)
CheckSum: 0000E418
ImageSize: 00006000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Description of the driver: RivaTuner/EVGA Precision / MSI Afterburner (called BSOD issues w/Win7)

Driver update site: http://www.Guru3D.com/category/RivaTuner/

--------------------------------------------------------------------------------------------------
Certainly delete. As soon as possible!

fffff880 ' 01077000 fffff880' 011ac000 sptd c:\windows\system32\drivers\sptd.sys
The symbol file: c:\windows\system32\drivers\sptd.sys
Image path: \SystemRoot\System32\Drivers\sptd.sys
Timestamp: Thu Apr 23 08:09:30 2009 (49F05A7A)
CheckSum: 000DA4CE
ImageSize: 00135000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Driver Description: pass through Direct host SCSI - Daemon Tools (known issues with Win7 BSOD)

Driver update site: http://www.daemon-tools.cc/eng/downloads
Removal tool at: http://www.duplexsecure.com/en/downloads

--------------------------------------------------------------------------------------------------

Remove as soon as possible!

fffff880 '01bb1000 fffff880' 01bfa000 dtsoftbus01 dtsoftbus01.sys
Loaded symbol image file: dtsoftbus01.sys
The symbol file: dtsoftbus01.sys
Image path: \SystemRoot\system32\DRIVERS\dtsoftbus01.sys
Timestamp: Fri Jan 13 08:45:46 2012 (4F10358A)
CheckSum: 00046D1E
ImageSize: 00049000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Driver Description: Daemon Tools driver
BSOD in Win7 problems

Driver update site: http://www.daemon-tools.cc/eng/downloads
--------------------------------------------------------------------------------------------------

If possible update

fffff880 '00e73000 fffff880' 00e94000 jraid jraid.sys
Loaded symbol image file: jraid.sys
The symbol file: jraid.sys
Image path: \SystemRoot\system32\DRIVERS\jraid.sys
Timestamp: Wed Nov 24 22:27:17 2010 (4CEDD795)
CheckSum: 0002CCCE
ImageSize: 00021000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Driver Description: driver RAID JMicron

Driver update site: http://www.jmicron.com/Driver.htm
FTP://driver.JMicron.com.tw/SATA_Controller/Windows/

Do all the above and monitor for a while to see if the problem is resolved.

My dell inspiron 1525 laptop random blue screen can someone help me please?

I have core 2 duo 2.0 ghz processor, 3 GB of ram .avast antivirus installed =.
Dump file: 013113-14492 - 01.dmp
Crash time: 31/01/2013 10:26:10
Bug Check String: IRQL_NOT_LESS_OR_EQUAL
Bug check code: 0x0000000a
Parameter 1: 0 x 00000016
Parameter 2: 0x00000002
Parameter 3: 0x00000000
Parameter 4: 0x82a49a5b
Caused by the driver: halmacpi.dll
Caused by the address: halmacpi.dll + 3030
Description of the file:
Product name:
Company:
Version of the file:
Processor: 32-bit
Plant address: ntkrnlpa.exe + 467eb
Stack address 1: ntkrnlpa.exe + 3ca5b
Stack address 2: ntkrnlpa.exe + 6775d
3 stack address: CLASSPNP. SYS + 5164
Computer name:
Full path: C:\Documents and Settings\ShafiQ\Desktop\013113-14492-01.dmp
Number of processors: 2
Main version: 15
Minor Version: 7600
Size of the dump file: 145 840

==================================================
Dump file: Mini013013 - 01.dmp
Crash time: 30/01/2013 21:36:04
Bug Check String: KERNEL_MODE_EXCEPTION_NOT_HANDLED
Bug check code: 0x1000008e
Parameter 1: 0xc0000005
Parameter 2: 0x8054a0ba
Parameter 3: 0xa79179a4
Parameter 4: 0x00000000
Caused by the driver: ntoskrnl.exe
Caused by the address: ntoskrnl.exe + 730ba
Description of the file:
Product name:
Company:
Version of the file:
Processor: 32-bit
Plant address: ntoskrnl.exe + 730ba
Stack address 1: ntoskrnl.exe + 7375f
Stack address 2: ntoskrnl.exe + 10d785
Battery 3 address: ntoskrnl.exe + 1186db
Computer name:
Full path: C:\Documents and Settings\ShafiQ\Desktop\Mini013013-01.dmp
Number of processors: 2
Main version: 15
Minor Version: 2600
Size of the dump file: 94 208
==================================================

Shaf

These were related to pool corruption (memory) probably caused by old drivers, the lacts of Service Pack 3 and Avast

I would update these drivers, remove Avast and replace it with MSE and updated to Service Pack 3

FIPS APPDRV. SYS Wed Jun 30 11:39:34 2004 (40E2DEB6)
Dell internal network card power cable
http://www.carrona.org/drivers/driver.php?id=APPDRV.sys

C:\windows\system32\drivers\aegisp.sys Mon Mar 26 14:37:21 2007 (460812E1)
AEGISP. SYS is associated with AEGIS Client 3.4.0.1. Meetinghouse data Comm or Cisco/Linksys wireless devices
http://www.carrona.org/drivers/driver.php?id=AegisP.sys

Apfiltr.sys Wed Dec 26 06:02:44 (4 477234) 2007
Alps pointing device
http://www.carrona.org/drivers/driver.php?id=Apfiltr.sys

Avast can be a cause of BSOD.

Please delete and replace by Microsoft Security Essentials at LEAST FOR TESTER

http://files.avast.com/files/eng/aswclear5.exe

http://www.Microsoft.com/security_essentials/

I have problems with random blue screens - 1st BC Code - of the suggestions?

I have problems with random blue screens - 1st BC code - all others are zeros. 6_1_7601 OS version, produced 768_1. Any suggestions? My computer is a model of HP P7-1235.

Thank you.

The minidump files showed two errors blue screen, an error KMODE_EXCEPTION_NOT_HANDLED (1e) referring to the amdxhc.sys and an error SYSTEM_SERVICE_EXCEPTION (3B) referring to the usbfilter.sys:

Bugcheck 1E, {0, 0, 0, 0}

WARNING: Unable to verify timestamp for amdxhc.sys
ERROR: Module load completed but symbols can be loaded for amdxhc.sys

Bugcheck 3B {c0000005, fffff8000f4770c5, fffff880085feb10, 0}

WARNING: Unable to verify timestamp for usbfilter.sys
ERROR: Module load completed but symbols can be loaded for usbfilter.sys

The amdxhc.sys is the AMD USB 3.0 driver and the usbfilter.sys is the AMD USB filter driver.

The amdxhc.sys is dated January 3, 2012 and the usbfilter.sys is dated November 16, 2011.

Two of these drivers should be updated to the latest version to ensure compatibility with the motherboard and between them.

HP has an available Update for AMD USB 3.0 driver but I do not see an AMD USB filter driver available for your computer updated.

I might suggest to try to get the package of motherboard chipset from AMD for versions newer and compatible to the two pilots.

You can try the "AMD Chipset drivers' starting from the following link which should update the two drivers.

http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

I recommend to create a System Restore Point before installing the new motherboard drivers.

Blue Screen BCCode: 10 d, is could someone help me solve the blue screen issue?

Hello
Is that someone could help me to solve the problem of blue screen. Thank you
BCCode: 10 d
BCP1: 0000000000000008
BCP2: 0000057FE24DC4D8
BCP3: 0000000000000004
BCP4: FFFFFA801BA97A90
OS version: 6_1_7601
Service Pack: 1_0
Product: 256_1

We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

If you have any questions regarding the procedure, please ask

stop random blue screen error DRIVER_IRQL_NOT_LESS_OR_EQUAL STOP: 0X000000D1

original title: stop random screen w/blue

I need help to solve this problem. My system will freeze and then randomly crash if I run games, programs or just sitting idle. I took the fan and blew out the dust, etc... and still no better. The info I get blue screen are:

DRIVER_IRQL_NOT_LESS_OR_EQUAL

STOP: 0X000000D1

nvstor.sys - address 83F42395

Any help would be appreciated to gratly.

Hello

Here is a version of Vista of the troubleshooter that Dena referred:

=================================================================

Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
Troubleshoot the BlueScreens - top 3 answers.

http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

-----------------------------------------------------------------------------------------------------------------

Check with your manufacturer for newer drivers video card (special forces), known issues and
other possible problems - check also the video card and game maker forums. It can even be
a problem created by the interaction of two pilots (rather than the usual cause), perhaps the
video driver and a swap file error and other causes work together to create the problem.

==============================================================

Even if you have done some of these methods here is the complete troubleshooting tool while
dealing with his need.

Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
programs may also cause this. Check the resolution of the problems and when you get to the pilot and sections tests memory refer to the generic methods in the next message and then returns to the resolution of problems
If necessary.

BCCode: D1 0x000000D1

Cause

A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

This bug check is usually caused by drivers who used a wrong address.

If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:
- The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
- The function call was made to a function in another pilot, and that this driver has been unloaded.
- The function was called by using a function pointer that was an invalid pointer.
BCCode: d1 0x000000d1<-- read="">
* 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

=========================================

Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

MyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html

-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.

Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html

-------------------------------------------------------------------------

Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
are other causes.

You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

You can try a system restore to a point before the problem started when one exists.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

-------------------------------------------------------------------------

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly

http://support.Microsoft.com/kb/958233

Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

The Options or Vista recovery disk Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

[SOLVED] ATI HD series random blue screen error: error 0x0000007e ntoskrnl kb965494

[Problems]

Fixes random maps of BSOD blue screen of death ATI HD Series - spontaneous different random BSOD error codes every time

Solves problems with his SoundBlaster X - FI (on board and add the map) extreme gamer - Sound sound seriously jerky or cut sharply off the coast

Solves delays random system - system shuts down randomly for no apparent reason

Solves the problems of disconnected Steam - quite noticeable in Call of Duty 4 Modern Warfare 2

Resolved A of Call of Duty 4 Modern Warfare 2 in delays play random or falling of the game so that your game. Usually, when first start the game. Not having not NAT enable may cause a similar delay as well.

[Source of problem]

The problem is with an older driver a new loading equipment when you first load the operating system from Microsoft. Shame on you, Microsoft. 6 weeks to understand it and it is CLEARLY without Microsoft. Sorry, but none of the NDA here.

Its a simple problem, yet almost impossible to find. Catalyst install Manager - ATI HDMI Audio Device will add an Audio device rather than to replace the device driver Audio HDMI Microsoft load the OS installation stage. Or the pilot is ignored all together because Microsoft has already loaded a driver installation for this device.

[Clean Install FIX]

When you install the ATI Catalyst 10.6, use the custom installation and exclude the HDMI Audio by unchecking the box next to the HDMI Audio. Pilots still end upward in the ATI Catalyst install directory if you can note the ATI installation path. The problem is that ATI will add an HDMI high definition audio device, DOES not replace the Windows device already loaded. Or may not charge a second device. Whatever it is, it uses the Microsoft device driver.

Updated driver software with the driver - Microsoft high definition Audio Device driver ATI manually following the instructions below.

[Windows OS already loaded FIX]

-Device Manager-

Manage driver updated using computer-> right click-> appliances-> sound-> right click HDMI high definition Audio Device-> update driver and browse to the directory of ATI (check include subfolders).

Also noticed the BIOS default settings cause problems of NB and DRAM. Overclocked to mount pressure on the system. Even if I adjusted the settings of the BIOS, I have always many BSOD until I updated the driver for high definition Audio Device from Microsoft with the ATI driver.

Ubuntu ran without a single question before changes to accommodate the Windows 7 operating system. For some reason any Windows is picky about certain parameters so that Ubuntu 10.04 LTS loads and runs without a single problem.

I have the logs memory.dmp and mini.dmp. Any help and any help appreciated :D

After running through the following steps, the problem here is the ntoskrnl.exe causing several bugs (BSODS). Even if it's a problem with Vista, this problem occurs with Windows 7.
- Event ID: 1001 Source: error checking
  The computer was restarted after a bugcheck. The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff88000e34294, 0xfffff880031bda18, 0xfffff880031bd280). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 052310-17316-01.
  
  The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000109 (0xb3b7465eeb217b7e, 0xfffff80002d18cc0, 0xa3a039d898a4a950, 0 x 0000000000000001). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 052110-23197-01.
OS: Microsoft Windows 7 Ultimate 64 bit

Antivirus: Microsoft Windows Security Essentials

Motherboard: Gigabyte GA-890FXA-UD5

RAM: 8 GB CORSAIR DDR3 4 GB 1333 MHz CORSAIR TW3X4G1333C9A TWIN

Video: Diamond ATI Radeon HD5850 1 GB DDR5

PROCESSOR: AMD X 4 965BE

HD: Hitachi 1 TB HDE721010SLA330 S/N MS03G16K

PS: Antec EarthWatt 750W PSU V2.3

KB: Logitech G15

Mouse: Razer Deathadder 3.5 G

Gamepad: Belkin n52te

First try to solve this problem:

Fresh OS loaded and BSOD immediately after the restart. Reason or details is unknown because of the immediate reboot without a kernel image. No events logged in Windows event logs with error checking information.

At ran Windows Update for the current patches. Random BSOD on restart.

Load the ATI Catalyst 10.4 Suite for Windows 7 (64-bit). Random BSOD on restart.

Problem again when the system is stopped and started. Chances are THAT BSOD will occur without emptying the core or the mini writing.

Run the checker - 90% chance of BSOD

Ran Check Disk - seems to be stuck on stage 4 'verification data file' 57531 63472 processed files. 01:05: PM 05/21/2010 FAIL stopped here 13:44

Second attempt to solve this problem (low-level format):

Using Hitachi tools - http://www.hitachigst.com/hdd/support/download.htm Drive Fitness Test - Switch BIOS from AHCI to IDE to access the SATA drive.

Quick Test results - HDE721010SLA330 successfully completed / Disposition Code = 0x00

Clear the result of the boot record - 0x00

Wipe the drive (drive clean takes time for 1 to ~3.5 hours) / 17:07 Media Analysis / 20:20 hours of fact and change the outcome - success 0x00

Updated the BIOS with F2 14/05/2010 (CPU compatibility improve)

Press DELETE to enter BIOS F8 to enter the Q - Flash insert USB Thumb Drive (a drive if no floppy is in system) select the file

Change the BIOS settings-

Integrated Peripherals-

OnChip SATA Type [Native IDE] change on [AHCI]

(No Option for this) F6 for drivers to be loaded in Pre-os Windows 7 64 bit

Install Windows 7 Ultimate 64 bit at 21:02 / Installer Reboot 21:14 / end of installation restart 21:18 / finalised result 21:21 - GOOD

Install the driver USB 3.0 NEC 21:22 - result - GOOD

Automatic update added KB978601 (pending reboot) and KB979309 - result - GOOD

Install the network drivers Realtek Lan_win7 - result - GOOD

Install win7_chipset (installed ATI Catalyst install manager 03.00.0765) 21:30 - result - BSOD KERNEL DUMP RENOWNED MEMORY. DPM at 5212010935PMMEMORY. DMP

Hitachi configured disk requires reboot (stop for cold start) - 21:37 - result - connected

Install Microsoft Windows Security Essentials 64 bits 21:43 d/l latest and scan / to 21:49 results - GOOD

Shutdown - 21:51

Power - result - GOOD

Install ATI 10-4_vista64_win7_64_dd_ccc_wdm_enu (taken from the site of AMD ATI) start 21:59 / 22:01 need to restart (close) - result - GOOD

Windows Installer wants to make changes - C:\window\SysWOW64\msiexec.exe/x {72736F5F-520 d - 472-A - 88 - 7 B 0 ERRRR it went away on its own.} Closing - 22:05 /qn REBOOT = really delete<---- came="" up="" again="" after="" cold="" start.="" think="" it="" had="" something="" to="" do="" with="" ati="" registration="" window.="">

Install Google Chrome - result - GOOD

Install Fusion - 2.0.1.117

Install AMD OverDrive 3.2.1.0439 utility - Enable AMD Smart profiles -.

Shutdown

Power - result - GOOD

Install the G15 - result - GOOD

Install Windows Ventrilo 3.0.5 x 64-GOOD

Install the Steam Client

Install COD4MW2

Change the settings to save energy for the computer to never sleep.

22/05/2010

Install gtalk, gApps

Up to 08:57 05/22/2010 BSOD Mini dump.

Dmp kernel that is renamed to 5222010857AMMEMORY. DMP

BSOD more 2s on 2 days.
Hello

Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
Troubleshoot the BlueScreens - top two responses.

http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

===========================================

The material is highly suspect!

Since you reformatted and reloaded Windows this indicates that the problem is either material or a
very basic pilot who has been reloaded - video/display, network/WiFi, sound, possibly 3rd party
mouse or keyboard, BIOS, chipset and other low level drivers.

This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
methods in the next message and then return to the if necessary troubleshooting tool.

Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
spyware/security programs.

When you get to the pilot and sections of the memory of the troubleshooter check the following message to
update drivers and memory test and then return to the troubleshooter if necessary.

------------------------------------------------

Even if you have some of these here tried a fairly complete convenience store just in case.

BCCode: 7F 0x0000007E

Cause

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

Common exception codes are:
- 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
For a complete list of exception codes, see the Ntstatus.h file located in the directoryInc. of the Microsoft Windows Driver Kit (WDK).

Solve the problem

If you do not have to debug this problem, you must use certain basic troubleshooting techniques.
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the/nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with theSwitch/DEBUG .

In case of exception code 0 x 80000002, the trap frame provides additional information.

If you do not know the specific cause of the exception, consider the following questions:
- Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
- Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.
If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

BCCode: 7F 0x0000007E<-- read="">
* 1141.html http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

-----------------------------------------------------

BCCode: 109 0 x 00000109

Cause

There are generally three different causes for this bug check:
1. A driver has deliberately or inadvertently modified kernel of criticism or data code. Microsoft Windows Server 2003 with Service Pack 1 (SP1) and later versions of Windows for computers x 64 do not allow the kernel to be debugged, except through authorized hot patches from Microsoft. For more information, see policy patch for x 64 systems.
2. A developer tried to set a normal kernel breakpoint using a kernel debugger which was not attached when the system is started. Normal breakpoints (bp) can be defined only if the debugger is attached to the start time. Processor breakpoints (ba) can be defined at any time.
3. A physical corruption has occurred. For example, the kernel code or data could are stored in memory has failed.
BCCode: 109 0 x 00000109<-- read="">
* 1262.html http://www.faultwire.com/solutions-fatal_error/modification-of-System-Code-or-a-Critical-Data-0x00000109-

--------------------------------------------------------------------------

Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html

-------------------------------------------------------------------------

Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.

You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.

How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.html

You can try a system restore to a point before the problem started when one exists.

How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html

-------------------------------------------------------------------------

Follow these steps:

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Installation and update of drivers to 7 (update drivers manually using the methods above is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

Startup Options recovery or Windows 7 disk repair

How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.html

How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.html

How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.html

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Portege R100 - Random Blue Screen of Death (IRQL not less or equivalent)

Hello

I've been making 'Blue Screen of Death' screens random in the last few weeks. The error is "IRQL not less or equal ' and it performs a memory dump each time. If I get the error and try to restart the phone after, I usually get the same screen of "Blue Screen of Death" when starting.

I have not installed new hardware lately. Last update about a year; upgrade memory. I tried to replace the RAM with a spare that I had and I was still getting the same error.
I have not installed new software in the last weeks, which would coincide with this error.

I am tracking the temperature of the processor and I'm higher than 48 degrees Celsius.
I'm not an expert, but I guess it's purely a hardware problem? As I rarely hear the CPU fan, I thought it might be overheating of the CPU.

But even after that make the CPU fan to operate at 100% using a free software called "Fan speed" I always got the same random screen of 'Blue Screen of Death'.

I would really appreciate any feedback and assistance. Really, I love my R100 and want to fix it.

Select this option.

Hey,.

> If it's the memory controller can it be replaced?
No, you can only replace the motherboard together. The memory controller is a part of it and it of not possible to replace the memory controller only.

Theoretically, it could be the motherboard (memory controller) to malfunction if Memtest86 errors even you have replaced the RAM already.

But 100% sure answer you can get a service provider approved because they have professional diagnostic tools.
Then get in touch with the guy and ask for help. They can also order a new card of mother if she needs to be replaced.

Satellite A500 - blue screen - BCCode:50

Hello

My satellite A500 displays a blue screen with the following script to this topic shortly after startup.
Can someone tell what I need to do?

Thanks in advance
Coinneach

Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7600.2.0.0.768.3
Locale ID: 2057

More information about the problem:
BCCode: 50
BCP1: FFFFF8800B7FD848
BCP2: 0000000000000001
BCP3: FFFFF880075EA624
BCP4: 0000000000000000
OS version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files helping to describe the problem:
C:\Windows\Minidump\012311-30654-01.dmp
C:\Users\Kenny\AppData\Local\Temp\WER-65052-0.SysData.XML

Hello

BSOD is always a painful question because it may be related to different reasons;
It may be a hardware problem, but it can also be a serious software problem.
So it's not easy to tell what exactly causes this

I got a BSOD in the past, because my RAM was faulty.
I have replaced and since it s ok.

Friend of mine had a BSOD problem too. It was caused by the graphics driver.
Updating the graphics card driver helped.

The high temperature may be one more reason to check if the temperature is not too high.

The new installation of the OS might be an option too, but it's your own decision

Blue screen problem T430s HELP!

Hi all!

I just got my laptop T430s yesterday and installed the patches for the system. However, today I met several times blue screen while browsing the Internet... Could someone help?

Description of the problem is listed below... Thank you very much!!!

Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.256.48
Locale ID: 2052

More information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8006AEF028
BCP3: 00000000B 2000000
BCP4: 0000000000100402
OS version: 6_1_7601
Service Pack: 1_0
Product: 256_1

http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/refurbished-T430s-BSOD-0x00000124/m-p/90415...

I think this should help you. Basically, you need a new motherboard. If you have Lenovo machine, ask for a new machine of replacement due to the DOA. If you have it in a store, then go and get a new replacement.

I have a virus protection, secure, said complete analysis but I still get random blue screens and computer freezing or cutting

I have Microsoft Security Essentials and am pretty sure that I have downloaded all the tools provide it free. However, my computer will randomly do the blue screen once in awhile or close on its own without no reason.

What should I do?

Microsoft Security Essentials is a security software. It does not solve the problems with the operating system that leads to a failure of the operating system (blue screen) which can be caused by many things.

I'm moving your question to the forum of Windows system repair section, but you will need to provide much more detail so that everyone to not even start you help.

-steve

Blue screen BCCode:1000008e

Hello

It just happened today, pc has shown that the blue screen and restarted, but maybe a month ago that I had the same problem too, this happens often

rarely say once every 2 months.

Also I can not open/download on my site, or do something with the .dmp file it says: access denied

------

Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1082

More information about the problem:
BCCode: 1000008e
BCP1: C0000005
BCP2: 83C42ED5
BCP3: 9CF73C9C
BCP4: 00000000
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Files helping to describe the problem:
C:\Windows\Minidump\Mini032514-01.dmp
C:\Users\karl\AppData\Local\Temp\WER-58219-0.SysData.XML
C:\Users\karl\AppData\Local\Temp\WERB07.tmp.version.txt

Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

DRIVER_VERIFIER_DETECTED_VIOLATION (c4)

This is the verification code of general bug for fatal errors, found by Driver Verifier.

1: kd > kv
ChildEBP RetAddr Args to child
8f7cc328 83d225a7 000000c 4 00000081 899439d 8 nt! KeBugCheckEx + 0x1e
8f7cc348 83d 26447 899439d a 8 0000008 00000000 nt! VerifierBugCheckIfAppropriate + 0x32
8f7cc364 807c 5786 899439d 8 00000000 8f02a540 nt! VerifierMmMapLockedPages + 0xcc
WARNING: Information not available stack unwind. Sequence of images may be wrong.
8f7cc424 807b724a 8fa3e3b8 b93dceb8 8f02a540 mcdbus + 0 x 15786
8f7cc7d4 83d1a6be 8fa3e3b8 b93dceb8 b93dcfb0 mcdbus + 0x724a
8f7cc7f8 83a7b931 b93dcf94 b93dcfd4 8fa3e3b8 nt! IovCallDriver + 0x23f
8f7cc80c 861acbce 8dfc8364 b93dcf94 b93dceb8 nt! IofCallDriver + 0x1b
8f7cc890 8dfc037d 8f161ab8 b93dceb8 fffdd014 CLASSPNP + 0x6bce
8f7cc8c4 8dfc09bb 8f161ab8 013dceb8 8dfc0442 cdrom + 0x337d
8f7cc960 861acc6c 8f161ab8 b93dceb8 a625e8f0 cdrom + 0x39bb
8f7cc97c 861abd44 8f161ab8 b93dceb8 b93dceb8 CLASSPNP + 0x6c6c
8f7cc990 83d1a6be 8f161ab8 b93dceb8 00000000 CLASSPNP + 0x5d44
8f7cc9b4 83a7b931 b93dcfb8 00000000 8f161ab8 nt! IovCallDriver + 0x23f
8f7cc9c8 8dfd6024 8f7ccaf0 8dfd6192 8fa40420 nt! IofCallDriver + 0x1b
8f7cc9d0 8dfd6192 8fa40420 b93dceb8 8 c 974090 NTIDrvr + 0 x 1024
8f7ccaf0 83d1a6be 8fa40420 b93dceb8 b93dcfdc NTIDrvr + 0 x 1192
8f7ccb14 83a7b931 b93dcfb8 b93dd000 8fa40420 nt! IovCallDriver + 0x23f
8f7ccb28 83bc811c 8c0f7bc0 b93dceb8 b93dceb8 nt! IofCallDriver + 0x1b
8f7ccb40 83bc766c 8c0f7bc0 b93dceb8 61bb0ed4 nt! RawReadWriteDeviceControl + 0 x 146
8f7ccb88 83d1a6be 8c0f7b08 b93dceb8 8bb6c668 nt! RawDispatch + 0x1fd
8f7ccbac 83a7b931 b93dcfdc b93dceb8 8c0f7b08 nt! IovCallDriver + 0x23f
8f7ccbc0 8073fd81 b93dceb8 8bb6c668 8f0228f8 nt! IofCallDriver + 0x1b
8f7ccbec 83d1a6be 8bb6c668 b93dceb8 9cb14370 fltmgr! FltpDispatch + 0xdf (FPO: [Non - Fpo])
8f7ccc10 83a7b931 b93dcfdc b93dceb8 8bb6c668 nt! IovCallDriver + 0x23f
8f7ccc24 83c7de25 9cb14370 b93dceb8 b93dcfdc nt! IofCallDriver + 0x1b
8f7ccc44 83c7e5ca 8bb6c668 9cb14370 0012ed00 nt! IopSynchronousServiceTail + 0x1d9
8f7ccce0 83c7f694 8bb6c668 b93dceb8 00000000 nt! IopXxxControlFile + 0x6b7
8f7ccd14 83a81c96 00000000 00000000 00000468 nt! NtDeviceIoControlFile + 0x2a
8f7ccd14 771b5d14 00000000 00000000 00000468 nt! KiSystemServicePostCall (FPO: [0,3] TrapFrame @ 8f7ccd44)
00000000 00000000 00000000 00000000 0x771b5d14 0012e2f8

Checker nt! VerifierMmMapLockedPages of mcdbus.sys (MagicISO SCSI Host Controller driver). Callers of MmMapLockedPages must be run at IRQL level <= dispatch_level="" if=""> mode is the kernel. Otherwise, the caller must run at IRQL level<=>

If mode is set to kernel and MmMapLockedPages cannot map the specified pages, the system issues a control bug.

---------------------

1. uninstall Magic ISO as soon as possible.

2 uninstall NTI CD-ROM filter driver by NewTech Infosystems (probably part of Acer Empowering Technology) as soon as POSSIBLE.

Kind regards

Patrick

Fight against the blue screen (BCCode: fe)

I have Windows XP on my laptop and did have a slow start up and now slow down the use of the internet. Recently, I got a blue screen error...

Signature of the problem
Problem event name: BlueScreen
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 4105

Files helping to describe the problem
Mini051612 - 01.dmp
SysData. XML
Version.txt

Additional information about the problem
BCCode: fe
BCP1: 00000008
BCP2: 00000006
BCP3: 00000001
BCP4: 875BE978
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1.

I don't remember do the recent updates. My program and anti-malware Antivirus can't find not all malicious files. Is it possible that I have a virus? Can I delete the above files, or do I need? They are located under AppData > Local > Temp > WERA277. How can I fix it? Any help is very appreciated. Thank you!

Hello

Do not forget to check with the manufacturer of system support (or motherboard for custom systems manufacturer)
and their forums (if any) for known issues.

Check these KB Articles that "pourraient" apply.

Stop 0xFE peripheral sleep or Hibernate with USB streaming output
http://support.Microsoft.com/kb/974303

"Stop 0x9F" error or "Stop 0xFE" on a Windows 7 or Windows Vista-based computer that
use some USB AMD EHCI host controllers
http://support.Microsoft.com/kb/982091

==================================================================

Pick up the pieces after a computer crash
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.

ZIP or download the content of the C:\Windows\minidump

Use SkyDrive download collected files and after shot/screenshot.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

=============================

Although the control of bug 0xFE: BUGCODE_USB_DRIVER indicates generally material it could easily
be a connected USB device and not a system USB device. And you can never really exclude drivers.

BCCode: FE 0x000000FE<-- read="" this="">
http://www.faultwire.com/solutions-fatal_error/BUGCODE-USB-driver-0x000000FE-* 1251.html? = date order

--------------------------------------------------------------------------------------

A possible cause can be updated to Windows, including pilots. Even the drivers are generally not considered as the
USB-related, such as video/display, network (NIC & WiFI) and others, may be the cause.

Especially Norton, Kaspersky, McAfee, SpyBot, Adaware and others may cause or have a role
in this issue. Try to uninstall it to see if that helps. Use the removal of their creator tools and/or
Special instructions. (Antivirus/antispyware/security programs)

----------------------

Remove all THE USB devices on the computer. Don't forget to search the drivers updated for all USB
devices.

References to Vista also apply to Windows 7.

Try these to erase corruption and missing/damaged file system repair or replacement.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-----------------------------------------------

Then lets refresh the USB stack

Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
Devices disabled - look around (with the exception of USB controllers) for all hidden devices / people with disabilities
(can have zero or more than one) and top - right click UNINSTALL.

Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

This KB shows XP how to and methods of Vista and Windows 7 are the same
http://support.Microsoft.com/kb/310575

This is a utility to help you, but do 1 above.

USBDeview is a small utility that lists all USB devices currently connected to your computer.
as well as all USB devices that you previously used. Run Options and tick three 1
are there choices to see if any.

http://www.NirSoft.NET/utils/usb_devices_view.html

You must remove all instances of the devices and restart.

----------------------------------------------

If necessary try these two:

Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

Hardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problems

=======================================

After the above, attach a USB device at a time to see if any cause the issue.

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

When I plug my webcam and open Skype and try to start the video my computer blue screens, BCCode: d1

I have this problem when I plug in my webcam and Skype open and try to start the video my blue screens, the info is shown after restart. My system is Vista Edition home premium 64. I find it more frustrating to have bought a new webcam as I suspected wrong a man!

Does anyone have the answer?

Bob

Signature of the problem:

Problem event name: BlueScreen

The system version: 6.0.6002.2.2.0.768.3

Locale ID: 2057

More information about the problem:

BCCode: d1

BCP1: 000000000000000A

BCP2: 0000000000000002

BCP3: 0000000000000001

BCP4: FFFFFA6006555AA2

OS version: 6_0_6002

Service Pack: 2_0

Product: 768_1

Files helping to describe the problem:

C:\Windows\Minidump\Mini051112-02.dmp

C:\Users\bob\AppData\Local\Temp\WER-63586-0.SysData.XML

C:\Users\bob\AppData\Local\Temp\WER1D6E.tmp.version.txt

Read our privacy statement:

http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

Thanks, but I have resolved the problem with the help of the forum, it was caused by the presence of old webcam drivers corrupted in the registry

under

HKEY_LOCAL_MACHINE, expand SYSTEM , expand CurrentControlSet , Control , class

Then, in category, click on {{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}}

Once I had deleted the value contained in the upper filters all then worked.

Thanks again

Bob

I get an error blue screen BCCode: fe

Vista, HP DV6700

Windows has recovered from an unexpected shutdown:

Signature of the problem:

Problem event name: BlueScreen

The system version: 6.0.6002.2.2.0.768.3

Locale ID: 1033

More information about the problem:

BCCode:                                               fe

BCP1:                                                    00000008

BCP2:                                                    00000006

BCP3:                                                    00000001

BCP4:                                                    86D33988

OS version: 6_0_6002

Service Pack: 2_0

Product:                                               768_1

Files helping to describe the problem:

C:\Windows\Minidump\Mini022212-01.dmp

C:\Users\Owner\AppData\Local\Temp\WER-2646354-0.SysData.XML

C:\Users\Owner\AppData\Local\Temp\WERBF39.tmp.version.txt

The link you provided gave access to the files.

The minidump file showed a BUGCODE_USB_DRIVER (fe) referencing the usbhub.sys.

Although no third driver turned cause the crash could still leave a third-party driver.

What I would say is to uninstall the Logitech Setpoint software.

Then install the next update, which will update the USB stack including the usbhub.sys:

http://support.Microsoft.com/kb/2547549

Then see if the blue screen problem resolves.

Subsequently, you can reinstall the Logitech Setpoint software using the latest version of Logitech.

Randomly - blue screen BCCODE - 1A - help

Similar Questions

Maybe you are looking for