Range meter fills property

Similar Questions

• color meter scale

  OK, I decided to try to use counters instead of using a digital indicator.  But I encountered a problem with the color scale.  If I adjust only the values of marker of scale [] to the range of colors is correct.  But if I start to turn the min and max range of the meter will damage the color range, it seems that they is interactive for some reason any.  I have no idea why the range meter would have something to do with the color range.  And I think that I am using the right properties.

  This counter indicates the pressure output at the beginning of a test, so she must be less than a certain value.  But I also have a configuration file so that the different units can have different minimum values.  So I need to make sure that the color scale will appear properly for more than a single line.  If the output pressure limit is 4.5 and then run, the scale is actually set to 4. 2. but if you set the limit to an even number like 4, the scale limit Gets the value 4.  So there's something funny about past with even numbers.

  Any ideas on a good difficulty or work around?

  LV2011 sp1

  I found that by moving the Tower - infinity all cleared up and works fine.  I'm guessing that LabVIEW does not like the range of colors higher higher on the scale of max.  If for any reason any they influence each other.  Then who would also change increment on the scale of the strange values even with a constant (not in vi I posted).

  In any case, thanks for the help.

• Insert color color range effect

  I try to add the color range effect to a layer and set the color for her. I tried

  Var effects =.property("ADBE_Effect_Parade").addProperty [0] selected ("color range");

  theEffect.property('Preview').setValue (color);

  I get an error that there is no available for setting instructions.  Is it possible to update this effect in a script?

  This property returns with a propertyValueType of PropertyValueType.NO_VALUE. So I think you're probably out of luck, unless perhaps you apply it as a preset.

  Dan

• could "Observed IP ranges" be obtained SDK2.5 VI?

  In VC client, we can get 'at the IP address ranges' ESX host - & gt; Configuration - & gt;  Network cards. This value could be obtained VISDK2.5 Java?  How?

  Thank you

  Yes, you can get this value using the method "QueryNetworkHint". This method is defined on the managed object HostNetworkSystem and takes the device as a parameter. Here, you can move the network card virtual name and the range "subnet.ipSubnet" property of the return object, PhysicalNicHintInfo ip information.

  http://www.VMware.com/support/developer/VC-SDK/visdk25pubs/ReferenceGuide/Vim.host.NetworkSystem.html#queryNetworkHint

• Change the property of a component for a State given in actionscript

  Hi all

  In fact the following will be used in a skin (mxml). But I guess that this has no influence on the issue.

  Suppose I have two States, say 'normal' and 'highlight '. Suppose that there is a component of path spark with a fill property

  <s:fill>
    <s:SolidColor id="fullTabPathFill" color="#333333" color.highlight="#999999"/>
  </s:fill>
  

  So I can do the following to change the color property using actionscript,

  function creationComplete():void {
    fullTabPathFill.color = 0x444444;
  }

  But what happens if I want to change the color in the State "hightlight property? Is it possible to change the property 'color.highlight' using pure actionscript? Or is this a situation where only a variable bindable can be used?

  Thanks for your reply.

  create a new style on your component and how to bind the color.highlight property to it

  Take a look on

  http://www.jamesward.com/2010/07/30/how-to-define-styles-on-skins-in-Flex-4/

• Where to store the element FlowElement meta-data (especially InlineGraphicElement)

  Is there a particular property on InlineGraphicElement which would be well suited for the storage of arbitrary developer relevant metadata?

  Motivation: I am generating the display objects used for InlineGraphicElements of XML sources on the fly.  During execution after the intervention of the user, I need to change the appearance of these InlineGraphicElements.  Thus, it would be good to re - generate the DisplayObjects that using the same XML file being used the first time for each InlineGraphicElement.

  I would have rather than XML stored as metadata in the case of InlineGraphicElement than making yet another id-keyed-table, so I hope that I forgot a handy dumping of meta-data property in the documentation of the FlowElement and InlineGraphicElement element.

  Thank you for the pointers of the TLF community has to offer.

  You can use the function setStyle on ILG to define any value as a property key pair.

  Richard

• size of the string channel

  Hi all

  I have worked with a channel with the String data type and fill in the values with a script. This channel is really big, there was more 4 000 000 values long a few times. It worked perfectly fine last week. When I tried to run my script today he woud throwing an error the 262145 index is outside the valid range for the property values.

  Digital channels works well and I has not changed anything in the script related to my channel.

  What could be the problem?

  Best regards

  Christoph

  Hi Edward,.

  It's a little embarrassing... I tried everything but restartung tiara...

  It is simply a lack of memory. Sorry to have bothered you.

  Best regards

  Christoph

• Masking of the Format of the text in Oracle forms point

  Hello Experts, I use forms of oracle 11 g with windows 7.i do a text field for an account (with a length of 10-digit) number. That when I type the entry number (assume it is a length of 8 digits), there is a prefix (two zeros according to fill the maximum length of the text box counts) added to the entry. I did this using a logic in pl/sql, but I want to know that it is a built-in function or any other feature of pl/sql in oracle for this feature. thnk you.

  Hello

  go to the range of the property account number and select format mask enter 10 zeros (ie) "0000000000".  Then your problem will be solved.

  In sql, you can use the lpad function integrated to perform the above task.

  Example:

  Select LPAD (12345678,10,0) double acc_no;

  OUTPUT

  Acc_no

  ----------------

  0012345678

• I can not remove the menu 'window' to Forms 6i

  in Forms 6i... I made the menu and called it 'Window'... and in the property palette I customized as follows:-
  
  http://img219.imageshack.us/img219/1858/winitemqz6.PNG
  
  guess which make the completely empty bar... (because I removed SMARTBAR & DEFAULT from the Module Menu of the form Module property) as I just have this Menu item in my Menu Module: -.
  
  http://img90.imageshack.us/img90/8134/menumodulesq4.PNG
  
  but I met through this error when I press Ctrl + R (run-time);
  
  http://img220.imageshack.us/img220/1852/frm10247iy9.PNG
  
  I do not know why this error pops up, although I did the same thing form of 10g and the result was good... bar completely empty (without error).
  
  you will enjoy the all suggest to solve this problem in my forms 6i.

  In the section 'Physical' the range of the property, the 'Visible' value to 'no '.

  You may also need to set the empty label.

• The proSafe (JGS524E + GS116E) Switches: Configuration Management Web GUI in VLAN specific

  Hello

  I use a JGS524E and a GS116E. The two are connected via a 802. 1 q uplink with all defined VLANS in him.

  A 802. 1 q other interfaces goes to a pfsense firewall, which serves as a router and dhcp server for each VLAN that I use.

  How can I configure the switches plug are in one VLAN specific and get his IP address of the dhcp server in this VLAN?

  At present, it seems to be random access: it is not predictable that range from intellectual property, it takes its IP configuration via dhcp...

  How management function works internally?

  Thank you

  Markus

  Hello

  Thank you. I tried it out, but the behavior seems to be a little different:

  I configured a static IP address for the switch (10.1.0.13 / 24). I have access to the switch web gui via the ip address of the host of a host directly connected (connected via a trunk port, where I put 1 VLAN on the trunk), but it is all the same, what VLAN that I use:

  When it is connected to the VLAN 1 I have access, but also through 10 VLANS, VLAN 20 and so forth (assumed, I configure my computer appropriate staticly in the IP network, for example 10.1.0.20 / 24). So it seems not be limited only to the VLAN 1. You have access to each vlan, only the IP configuration must be in the same network.

  I'm not sure, how it behaves when cascading the two switches, I have not tried.

  If this information can be useful for other users with the same question about this switching product line.

  For me, this behavior is not very well implemented from my point of view. For security reasons, you must limit access to the administration, for example by allowing access from a specific hardware port or a vlan. With the effective implementation, centralized management for a cascade topology is not easy to set up, perhaps because the behavior is not very clear and not documented in the manuals.

  Mentioned on the edge: there is no available TLS/SSL encryption when accessing the web gui (not https). So the password is transmitted in clear text... not a very good idea, I think.

  Thanks a lot for your help.

  Best regards

  markusd112

• AutoScale

  Hello

  I create a VI for the acquisition of the ECG signals. I've attached a screenshot of my VI. I have the following doubts.

  I would be grateful if you could help me solve them.

  1. I want to manual autoscaling of the y-axis i.e. Amplitude. This is it will be autoscale only when you click a button on the front panel. Can you please tell me how to do?

  2. I want to setting "window period" on the front panel for adujusting the duration of the widow of axis X. How to do this?

  Thank you.

  (There are no screenshots in your message.)

  Auto-scale once, you would use the 'Worthy ladder' ground cable with a 1 (0:do not autoscale, 1:Autoscale once now, 2:autoscale)

  Put the property node within a case connected with a Boolean button closure structure.

  To adjust the range of the x-axis, you can set the range with a property node.

• Current vs. later compared to the period?

  I played with the construction of the tables of data for some dashboards, and I ran across something that I need help. I see that for a given metric, there are sometimes several values: current, later period. In particular, I'm looking for the metrics for data warehouses. What is the difference between them? I guess that the period is a value accumulated during the given period of time? But I find that the values for the current and most recent are different. I want to know the most recent value. Which should I use?
  Thank you!!

  Brian,
  The history of the property has a list of values for all data collected during the period of range
  The current property is the last entry in the history of the current range of time, as long as it has not gone stale.
  The last property is the last value that we have in any given time interval.
  Ownership period is set in the interval of time together.
  ------------------------------------------------------------------------------------------------------
  The current value is defined to be the same as the last value at least that the most recent value is not considered cool in this case, its value is null.
  The current property is the last entry in the history of the current range of time, as long as it has not gone stale.
  The last property is the last value that we have in any given time interval.
  If the time range is set on the past, then the current property behaves like the last property for this time period.
  Freshness: the last value of a metric is considered fresh , if it was collected more recently that:
  right now - (3 x the last sampling period)
  More precisely: Foglight data source implementation detects that the last value in the specified time interval and performs a freshness test only if the time of the end of the time range is within a minute of the current time, assuming that the samplePeriod is 20 years. If the freshness test fails, then the current property is disabled. Freshness test will fail if the time of the end of the last value is sampling of currently more than three times.
  HTH!
  -Larry

• Cannot connect Win 7 Pro PC Win XP Workgroup

  Win 7 Pro 64 Bit PC, I see the Win XP PC if I'm typing \\name in the search box or line URL but the connection disappears as soon as I close the Explorer. They do not appear under network.
  I do not see the Win 7 PC to any Win XP PC and can't do their ping
  I tried to disable the firewall from Win 7, but that did not help.
  I tried to change the network ID on 2 PC different of XP, but it does not work:
  Right click on desktop, select Properties
  Click Network ID - watch computer belongs to a domain that is not, there is no server
  changed by not part of the domain
  changed the name of the workgroup is same as name of working group in the main screen
  Save the changes and reboot
  When I go back to look at the changes are not made, back on the field and bad name working group (the "working group")
  What could be blocking me to change the settings for XP? I am logged in as administrator (the only user on all XP PC).

  Thanks for the links. I tried all settings suggested and many more other items, but I still can't Win 7 Pro SP1 from PC to see the Win XP Pro SP 3 pieces.
  Even tried stopping IPv6 and changed sharing encryption 40 or 56-bit
  All Win 7 PC can see another Win 7 PC and all the XP PC can see all other XP PC.
  I Ping the PC XP from Win 7 PC, but I can't Ping a Win 7 PC to any PC in XP.
  The Win 7 PC IP addr are 192.168.2.xxx, the XP IP addr 192.168.1.xxx.
  This would be a router issue?

  XP cannot recognize the Homegroups Win7 so machines Win7 need to be networked by using user accounts and passwords.

  All the computers are in the same workgroup and the same subnet (IE. 192.168.1.x AND 192.168.2.x)

  You did not say as much, but it seems that if you are using 2 routers, or a router, and another device that is also using DHCP to assign a different range of intellectual property of the numbers on your local network. There should be only one DHCP server on the network. If you are using 2 routers, rewire inter-connexions such as only one router is the only DHCP server and offering all services while the second router routing simply acts as a switch with no routing service.

  The type of network for Win7 computers must be set to home or work. Choice work avoids having to deal with getting rid of the default settings of the homegroup.

  Make sure the network discovery and file & printer sharing turned on for home or work on Win7 computers networks

  Regarding access to shared files, etc., XP computers must connect to a Win7 computers with the user name and password of a user on the Win7 machine. The commonly recommended solution is to create a single common username with the same password on all computers on the network. (If you find a better way, I wonder if it's me)

  Encryption level should not affect the connectivity (high is best) as long as it's the same for all machines.

  The Win7 firewall may be set by default to block incoming Pings, or it might be your router configuration. Anything from an IP address 192.168.1.x could be regarded as an external network by the 192.168.2.x router connection and incoming Pings can be blocked because of this.

• VPN l2l failed inside on ASA 5520 (8.02)

  VPN l2l is dropping packets to Phase 5 because of a rule configured. I have an isakmp his but the client cannot connect to the destination here in my network. I'll post my config to access list at the bottom of the Packet-trace output.

  vpnASA01 # entry packet - trace within the icmp [10.0.0.243] 0 8 10.97.29.73 det

  Phase: 1

  Type: CAPTURE

  Subtype:

  Result: ALLOW

  Config:

  Additional information:

  Direct flow from returns search rule:

  ID = 0xc92087c8, priority = 12, area = capture, deny = false

  hits = 85188209121, user_data = 0xc916a478, cs_id = 0 x 0, l3_type = 0 x 0

  Mac SRC = 0000.0000.0000, mask is 0000.0000.0000

  DST = 0000.0000.0000 Mac, mask is 0000.0000.0000

  Phase: 2

  Type: ACCESS-LIST

  Subtype:

  Result: ALLOW

  Config:

  Implicit rule

  Additional information:

  Direct flow from returns search rule:

  ID = 0xc87f1f98, priority = 1, domain = allowed, deny = false

  hits = 85193048387, user_data = 0 x 0, cs_id = 0 x 0, l3_type = 0 x 8

  Mac SRC = 0000.0000.0000, mask is 0000.0000.0000

  DST = 0000.0000.0000 Mac, mask is 0000.0000.0000

  Phase: 3

  Type: FLOW-SEARCH

  Subtype:

  Result: ALLOW

  Config:

  Additional information:

  Not found no corresponding stream, creating a new stream

  Phase: 4

  Type:-ROUTE SEARCH

  Subtype: entry

  Result: ALLOW

  Config:

  Additional information:

  in 10.0.0.0 255.0.0.0 inside

  Phase: 5

  Type: ACCESS-LIST

  Subtype:

  Result: DECLINE

  Config:

  Implicit rule

  Additional information:

  Direct flow from returns search rule:

  ID = 0xc87f3670, priority = 111, domain = allowed, deny = true

  hits = 67416, user_data = 0 x 0, cs_id = 0 x 0, flags = 0 x 4000, protocol = 0

  SRC ip = 0.0.0.0 mask 0.0.0.0, port = 0 =

  DST ip = 0.0.0.0 mask 0.0.0.0, port = 0 =

  Result:

  input interface: inside

  entry status: to the top

  entry-line-status: to the top

  the output interface: inside

  the status of the output: to the top

  output-line-status: to the top

  Action: drop

  Drop-reason: flow (acl-drop) is denied by the configured rule

  = ACCESS-LIST + Config =.

  the object-group L2LVPN-blah_local network
  network-object 10.97.29.73 255.255.255.255
  the object-group L2LVPN-blah_remote network
  network-object [10.0.0.240] 255.255.255.240

  INBOUND_OUTSIDE list of allowed ip extended access object-L2LVPN-blah_remote L2LVPN-blah_local group object

  L2LVPN-blah_obj allowed extended ip access-list object-L2LVPN-blah_local group L2LVPN-blah_remote

  access-list SHEEP extended permits all ip [10.0.0.243] 255.255.255.240

  Route outside [10.0.0.240] [10.97.29.1] 255.255.255.240 1

  address for correspondence card crypto outside-VPN 46 L2LVPN - blah_obj
  peer set card crypto VPN-exterior 46 [10.0.0.243]
  outside-VPN 46 transform-set esp-sha-aes-256 crypto card
  outside-VPN interface card crypto outside

  IPSec-l2l type tunnel-group [10.0.0.243]
  IPSec-attributes of tunnel-group [10.0.0.243]
  pre-shared-key *.

  [10.0.0.1] is to protect the global addresses of clients. Assume that these are still used in place of the current range of intellectual property. 10.0.0.240/28

  ===========================================

  Thanks in advance.

  Michael Garcia

  Profit Systems, Inc..

  Hi Michael,

  -Is the IP peer really part of the network that make up the field of encryption?

  -Is the ACL INBOUND_OUTSIDE applied (incoming) inside or outside interface (inbound)? It is the current form, it would need to be on the external interface.

  -You specify the peer IP only in the ACL SHEEP, so all other traffic is NAT would and eventually denied because it does not match the field of encryption

  Someone else may have a few ideas, but these are questions I have for the moment.

  James

• Network printer printing not worked when I was connected to Comcast. I switched to ATT Uverse and the printer stop working

  I recently spent for my internet service Comcast Xfinity to ATT Uverse.  I have a printer wireless hp3100.  The printer works on Comcast internet, but does not work with Uverse internet.  I know that there must be a way to solve this problem, but I can't understand it.

  I expect that ATT is using a different range of intellectual property. Consult the documentation for the printer on how to change the IP address of the printer.