Range of color HP Laserjet CP1025nw printers - printer prints two copies in a single application.

pcwizard (HP) asked that I try Foxit Reader 5.1 to see if the printer prints correctly.  I used the same previous document and make printing with Foxit Reader 5.1.  The printer prints two copies when alone was asked, as he had done in the past.  We still have a problem.

I use Windows 7 (64 bit) for the OS.  I experience the problem on two different computers.

dslledyrt

I did some research more around the last two days and here's what I discovered:

1. it is a their port with the windows operating system 7.

2 current driver, 1025 - complete solution version 3.0, listed on hp.com should have this fix in there. (Please keep in mind, I have not had time to test it yet)

3. If you still experience this issue, you must use work around (posted thread upward) due to the problem of port in the Microsoft OS.

My lesson learned from this excersise: always use the most recent driver listed on hp.com

(I don't have this driver loaded on my test system either!)

Tags: HP Printers

Similar Questions

  • The laser color HP LaserJet CP1025nw printer cannot print - points held in the queue

    I am running Windows 7 64 bit and my laser color HP LaserJet CP1025nw printer fails to print jobs in the queue. I turned off the printer accidentally as he was preparing to print a document, and since then I am unable to get the printer to work. I used the HP print and Scan doctor and he said that he had detected and solved a problem with the queue in vain the printer print a test page. What other options do I have? Thank you.

    Rrolley, looks like you have a problem with the print queue of the printer. To start, just to tell you (that you probably think) it is not good to switch off while he's getting a print request. To resolve this problem, I recommend that you turn off the printer and the computer completely and cut the power for about thirty seconds. Then power the two machines back on, and when they started well then try the print job.

    Let me know how it goes and I'll get right back with you!
  • LaserJet P1005: LaserJet P1005 unintentionally print several copies after the decommissioning of 10 of Windows to Windows 7

    My LaserJet P1005 trustworthy priinter was perfectly printing for a few years on my HP TouchSmart 300 running Windows 7 and connected via USB1.  I have upgraded to Windows 10 for two weeks before deciding that he was turning too slowly.  Subsequently, I have downgraded to Windows 7.

    Since the downgrade, the printer has been printing several copies of all documents (eg.  Word, Excel, Web pages).  He prints a copy, waiting (the State indicates a copy pending) and continues to print 3 or 4 future COPs..

    So far, I have tried the following:

    1 deleted and reinstalled the printer P1005 driver.

    2. guarantee that no multiple copies are selected in the options of the software and a printer.

    3. you click Printer Sharing tab in the printer properties.

    I know that's not a printer for the State of the art, but any suggestions on my printer P1005 back to normal would be greatly appreciated.

    Tom

    Hi @Amoeba,

    Welcome to the Forums of HP Support! I see by your post that the printer prints multiple copies of the same document. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    Try to clear the record of spool and restart the spooler to print, see if this will help, clear how current Print queue in Windows Vista & Windows 7.

    Please try the steps listed in this document, if the problem persists, HP printers - Print Jobs stuck in the print queue (Windows). They should help this situation. What were the results when you ran the Print and Scan Doctor?

    I used this document to the network printers, you can try it to see if it will help with the USB connection, HP LaserJet Pro P1102w and printers P1606dn - printer continuously prints the same Print Job after it is installed on a network.

    Please let me know the results and if there is anything else I can help you. Thank you.

  • Print two photos on a single sheet of photo paper

    On a C5180 all-in-One printer how to print two 5 x 7 photos (same photo) on a single sheet of 8 1/2 x 11 photo paper?  I am running Windows 7 on my computer.  It seems a pity to print a single 5 x 7 on page & lose the use of the rest of the document.

    Bill

    Do you remember the name of the program by any chance? I think you can do this with Windows Picture Viewer, and it must be installed with the operating system. What program opens your photos now?

  • Until Deskjet ink advantage 3545: print two slides on a single page

    How can I print two slides on a page?

    I used Microsoft PowerPoint mobile, then I clicked on print

    I found no print two slides on a page see photo

    6.0 Android

    Hey @Hojhoj,

    Welcome to the Forums of HP Support!

    I appreciate that you try to print multiple pages per sheet from your phone on your Deskjet Ink Advantage 3545 e-all-in-one printer. As the Android is a simple operating system, the print plugin or the HP ePrint app are able to print multiple pages per sheet. If you need to do, your options would be to either change the file to give the impression that you have multiple pages per sheet before printing or use a Windows PC or Mac to print your document instead.

    Please let me know if you have any other questions. If not, have a great week!

    If this solves your problems, please help other users find this thread by clicking on accept Solution below my post.

    If you appreciate my help, please inform other users by clicking on the icon below my post thumbs up.

     
  • print two photos on a single sheet of paper of photo officejet pro more than 8600

    I would like to print 2 photos on a single sheet of photo paper. These should fit into small frames and requires 900 x 650-two fits 6 x 4. When I go in my photo editor, it shows the picture (I tried with a) up on the preview, but the printer says that this is not the correct size of paper. Thank you.

    Thank you for taking the trouble to answer. After I posted the request I tried again and this time she did not accept the photo paper. I don't know what happened. One of my problems was how to get 2 pictures on the page, because after that I had chosen 2 to the sheet he doesn't seem to be anyway to introduce the other. Now, I discovered that all I have to do is select the two images in windows Explorer, and although it does not show a preview it does not produce the required result. Thank you again for your willingness to help.

  • HP LaserJet CP1025nw color: color HP LaserJet CP1025nw does not print

    After a big print job (60 pages), none of the 7 computers at the Office could print, prints remained in the queue.

    Have restarted, all computers, printer, router wi - fi > no joy.

    Printer restored to factory settings, it did print 2 test pages, so we know that the printer can print...

    Impressions from all computers remain in the queue.

    Have you tried "Devices and printers" Troubleshooting > no joy

    All computers print always very well on another HP printer wi - fi office, so we know that's not the router at fault.

    But at the same time, while the printer is working, we cannot print.

    It is disconcerting. Any ideas?

    In hindsight, it seems ridiculous, but the problem has been resolved by activating the function wi - fi printer, which was accidentally turned off and no one bothered to check...

  • HP Laserjet CP1025nw: wireless printer

    My Hp Laserjet CP 1025nw does not recognize the modem.

    Hi @Novice_62,

    I see that you have problems with the printer not recognized on the wireless network. I will definitely do my best to help you.

    There is no wireless setup for this model, so we will have to uninstall and reinstall the printer software to set up the wireless back on the printer.

    Restore the default settings of the printer.

    Reset the printer to factory default settings.

    Print a configuration page to make sure that the IP address is back to 0.0.0.0 and the name of the network SSID is disabled.

    Uninstalling the printer software.

    HP LaserJet Pro CP1025nw color printer drivers.

    If you appreciate my efforts, please click on the "Thumbs up" button below.

    If there is anything else I can help you, let me know. Thank you.

  • Multifunction color HP LaserJet Pro 200: printer HP LaserJet bleeding in the pages

    Well, so a few months ago our printer started printing with strange faded color smear on the pages. Very subtle at first, but it has progressively worsened over the months, and now it covers almost the page:

    http://i655.Photobucket.com/albums/uu275/zzzz4444/HP.jpg

    It is magenta on one side of the page and orange-ish on the other. I tried to manually run a Page several times cleaning, cleaning things, replacement of cartridges, replacing the transfer roller, and calibrate the color cartridges, which none shows any significant improvement. Does it also on the print side of the paper, and it seems that the toner is leaking on the transfer roller mainly (on the edges, but also on the rest of the roll).

    Any ideas/suggestions?

    It seems that as faulty toner cartridges, are you using the new HP cartridges?

  • HP Laserjet M1217: Printers print anything

    I have a user with a printer connected via USB.  It was workng fine up until today ' today morning that does not just print.  There are also online, and when you sent a print job it has an exclamation point.  When you try to solve problems, it fails.  I tried reinstalling the driver, but the computer does not recognize it and the installation program will not again.  I installed the HP Universal Print Driver PCL6 and it did not help.  We have tried different USB Ports and a different cable.  After that I restarted the PC it worked and now again after 45 minutes it no longer works.  Advice and or ideas about why it continues to be.  I had a lot of sales reps with the same problem where the pc does not recognize any connected printer.  Please notify.

    Kind regards
    Pislor

    Hi @viju932 and welcome to the Forums of HP! I can help you with your M1217. I understand that you can not print even if the computer says the printer is offline. I see also that you tried the driver universal PCL6, different USB ports, another USB cable, and only after restarting the PC you can get the printer works, but only for about 45 minutes. Please run printing HP and doctor Scan and be sure to let me know the results of the tests carried out.

    HP printing and doctor Scan is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

    • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

    • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.
    • Driver: checks the driver missing or corrupt files.

    ·         Device Manager: check the problems in Device Manager that could prevent printing.

    • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.
    • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).
    • Port Match: check the port settings for the HP product.
    • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.
    • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.
    • Print settings: check and adjust the print quality settings.
    • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.
    • Scan tests: check the scanning mechanism, drivers, and registry entries.

    Source: www.hp.com/go/tools 

    If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to find that the key and the box are both in a green circle.

    • If you see only the Green checkmarks, the tool has not found no problem.
    • If you see Green key, the utility identified a problem and fix it automatically.
    • If you see yellow exclamation points, the test failed and requires monitoring of the user, but the step was ignored.
    • If you see a red X, follow the onscreen instructions to fix the problem.

    Thanks, I look forward to hearing back on your part.

    If this resolves the issue, please click Accept as Solution button below. If the problem persists, be sure to let me know the result of printing and scanning doctor. Thank you.

  • Color HP LaserJet Pro 200 printer M251n Imaging drum

    I am about to enter the market for color laser printer and reflected on the CP1025 in option, but I'm leaning toward the M251n.

    It is purely for domestic use - no commercial!

    My curiosity is the imaging drum?

    for the CP1025 replacement is offered life - 15000 copies (Ithink)

    Can't seem to find a reference for the M251n

    What is the estimated life of the Imaging for the M251n drum?

    Is there a replacement drum?

    Are there other partners of parts - for example the belts to replace?

    I note that the cartridges supplied in the box are of limited life (700 prints)

    The drum also has similar "capacity/life shortened.

    Hello user-retirement,

    Please find below the answers to your questions. I was able to gather most of the information.

    1 > what is the estimated life of the Imaging for the M251n drum?
    see the cyclical report in print specifications, which is 30,000 pages per month. for CP1025, the duty cycle is 15000 per month.
     http://support.HP.com/us-en/document/c03315004

    2 > is there a replacement drum?
    Yes, but the drum is an integral part of the Toner Cartridge.

    3 > y at - it other associates of parts - for example of the belts to replace?
    I don't think so. Contact HP Support.

    4 > I see that the cartridges supplied in the box are of limited life (700 prints)
    Yes, the page yield is 700 because they are introductory toner cartridges.

    5 > the drum has also similar "ability/shortened life":
    Drum life lasts the life of the Toner Cartridge. The drum is an integral part of the cartridge.

  • Printing with color HP LaserJet 2840 PCL6 printer problem

    I installed the printer on another computer. When I try to print, every time I need to reset the printer before it prints a document that is made by the new installed MS Office 2010. What to do to be able to print at a time?

    This looks like a problem with the printer itself.  Have you checked for firmware later?

  • Multifunction color HP LaserJet Pro 200: printing problems - Full black pages!

    My printer has suddenly started printing totally black pages - new black toner cartridge a month ago.

    Do you still have the old toner cartridge. It could be the toner so if you can try another good cartridge. I also have to remove and reinstall the black toner cartridge.

  • CP1025nw - print two copies to the laser

    Hello

    My HP CP1025nw Laser works well with one exception: I still got a weekly pdf file delivered to my Inbox mailbox and that specific pdf, print twice each week. I have no problem with any other file, pdf, or other, only this fact sheet 8: waste paper and toner to have twice.

    I'm very advanced user, but did not find any setting that may be the reason. Of course, I checked Traoré ' copies of many times ' value = 1.

    This isn't an advertisement, the file of this source, reports economy: https://www.wellsfargo.com/com/research/economics/economic_commentary

    I'm in the United Kingdom then paper/EIA is A4 - the letter / LEGAL can format a problem?

    Thank you

    I found a solution for this that works for me. For Windows 7, it's should be similar on Vista or XP. 1. on the start menu, select devices and printers. 2. right click on the printer, and then select printer properties. 3. click on tab Ports 4. UNCHECK enable bidirectional support. 5. click on OK Please let me know if it works for you. (or not!)

  • HP Laserjet does not print

    My HP Laserjet 1320 leaves printing several copies of a single document several weeks ago. Yesterday, I uninstalled, reinstalled, turned off the printer, unplugged, it turned on and plugged in. The computer '' recognized '' a new piece of hardware, installed a pilot... nd then refused to print at all, not even simple. After that, I turned off everything, unplugged and replugged the printer and still nothing. Then I checked the updates and found that HP has had a new update to the 1320 in December, so I tried to install that (three times), but it will not install. I just get a failure message. I have Windows 8 on my desktop PC. I have also (used to) have the printer configured so I could access it from other computers in the House to print via wi - fi. Help! I have a job for which I need to print 600 copies of a single document, and now I can't print anything.

    Sure, go ahead and remove the second printer 1320.

    My installation of 1320 under Win7.

    Strange the HP has a USB port in the support doc.

Maybe you are looking for