Range of coverage of C40 default omnidirectional Microphone

Hi all

My client would like to know the coverage away from the default C40 omnidirectional microphone?

Can anyone help?

Best regards

Ben Lai

Hi Ben,

Used on isan codec Audio Technica AT841UG Omni directional Microphone.

You can see the following link for details and specifications-

http://EU.Audio-Technica.com/en/products/product.asp?CATID=2&subID=7&ProdID=1469

Tags: Cisco Support

Similar Questions

  • BlackBerry Q10 range of coverage 3G low on 10.3.1

    I have a BlackBerry Q10.some places I use the network 3G, but ranging from very low ability mostly show (E) but even place another mobile show H or H +.
    Huawei Oppo or galaxy smartphones

    BlackBerry Q10
    Software version: 10.3.1.1784
    OS version: 10.3.1.2582

  • Telepresence C40 intermittent on / off input audio microphone

    Hello

    There was a time that audio input microphone of telepresence C40 goes OFF mode when you start the unit. Also when manually activate us it and end the videoconference call.

    The mode will be automatically extinguished.

    The configuration is C40 entry audio microphone is connected to the mixer of third party.

    Is there no workaround solution to fix?

    Much appreciated for your help. Thank you very much!

    Hi all

    Ralph has opened a case with TAC and arrived at webex. It's just to let everyone know that we were able to solve the problem. Just to convey information. That's what we were doing on the webex session:

    Indeed, we found tha the microphones were shut off as soon as we have disconnected from the call. We checked the following things:

    xConfiguration conference 1 AutoAnswer Mute: Off

    xConfiguration MicUnmuteOnDisconnect Mode 1 Conference: on

    xConfiguration Provisioning Mode: TMS

    We turned off the MicUnmuteOnDisconnect first and the problem still persists. We have then canceled endpoint of the TMS suspecting that configuration could come from the TMS and checked by calling again. Hoewver, the microphones were always switch off to end the call.

    Finally, we checked the parameters of MuteOnInactiveVideo:

    xConfiguration Audio input Microphone 1 VideoAssociation MuteOnInactiveVideo: on

    xConfiguration Audio input Microphone 2 VideoAssociation MuteOnInactiveVideo: on

    We shot both of them off and the problem was solved. Ralph, please check this question as answered so that others can enjoy.

    Kind regards

    Saint André

  • ADAPTER DOUBLE BAND ONLY SHOW THE 2 GHZ RANGE, HAVE LOST 5 GHZ BUT PRESENT ON ALL OTHER PCS

    I inadvertently "REMOVED" the recognition of 'network' of 5 ghz on a menu that allowed me to "remove unnecessary networks."  I thought I was doing the right thing, but deleted by mistake the 5 ghz. Now I just can't side 5 ghz of the card to show as an available network when I click available networks at the bottom right of my screen.

    My dual band router LInksys is certainly put 2 and 5 ghz because I can see them on other PCs in the House and my Iphone6. It's only the HP All In One which now lacks the recognition of 5 ghz.

    It was working fine before my despicable act. I could easily switch between 2 ghz or 5 ghz...

    I rebooted router and reset I can see the 'admin' menu for the router on this computer.  I restarted my HP. I tried to restore my pc soon, and no effect. It seems that somehow I just simply deleted a vital statement or turned a vital switch that prevent this receiver WiFi HP-receive adapter or by switching to the 5 ghz range and the value by default only the 2 ghz.

    My system details also show that it is a working adapter RALink 3290 80211 bgn

    Is there a way to turn this back on? How do I re - establish the 5 ghz network on this HP?

    Any help out there?

    George P

    You are the very welcome.

    That is right.  No 'a' doesn't = No 5 GHz.

    I can't explain why you thought you saw other 5 GHz networks on your PC.

    The only wireless networks that should be visible on your PC are only in the 2.4 GHz band, because it's all Ralink card in your model can see.

    You might be able to replace the card with a wireless card dual band but I can't say for sure.  Some PC have a BIOS lock that prevents users from installing a different wireless card.

    You would have to make sure your PC has two antennas connected to the current Ralink wireless card because all dual-band cards have at least two terminals of the antenna to connect to.

    I would say the best thing you can do would be to go to your local office supply store and pick up a wireless network adapter dual band USB external.

    They now power USB wireless adapters, so you can get one of these.

    You wouldn't have any compatibility or hardware issues with an external USB card and not worry about BIOS locks or the number of antennas inside your PC.

  • Table 20 Cisco TelePresence microphone

    Hello

    What is Cisco TelePresence Table microphone 20 cover?

    It is omnidirectional or unidirectional?

    Concerning

    Leonardo Santana

    It's an omnidirectional microphone.

    For your reference to the subject of the form:

    https://communities.Cisco.com/docs/doc-47216

    Kind regards

    Acevirgil

  • Microphone built into the laptop Samsung RF 511

    Hey all,.
    I've updated my laptop to windows 8 and everything worked without problems, but I met a snag trying to get my microphone to work. All the details on how I can get the microphone to work in my mobile Samsung RF511 with windows 8. I do not rely on this topic quite a fair bit. Thank you! :)

    I have the same laptop and this happened to me also.  The problem is when you upgraded, Windows by default your microphone to the Jack and not the microphone.  You have to go in your entourage, to change the default behavior, and it should work.

  • Photos and El Capitan10.11.5 problems

    I'm under Photos on a Macbook Pro using system 10.11.5. Photos no longer allow uploads email or Facebook and a consequence of attempting to do so is a range of other features to default, for example quiting, are dimmed. I ran photo repair and repair disk, but there is no improvement. Any ideas?

    Hello..

    Safe Mode boot deletes some caches system that can help...

    Follow these steps to start in safe mode.

    1. Start or restart your Mac.
    2. As soon as you hear the startup tone, hold down the SHIFT key.
    3. Release the SHIFT key when you see the logo Apple appears on the screen.

    After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

    To leave safe mode, restart your computer without pressing any keys during startup.

    Then try to download the photos (sharing) by email or on Facebook.

  • NIPXISM port conflict

    NIPXISM. EXE seems to grasp from a number of ports and sometimes catches a port that I need for other purposes.  I can say that he not enter a particular port or start typing another series?

    You can also limit the range of dynamic of the computer ports, such as the computer can not affect port 41985 as a random port. It seems that 41985 is inside the range of dynamic ports by default Windows, which also gives you an answer about what port numbers to avoid if you choose to change the third party device.

    https://support.Microsoft.com/en-us/KB/929851

  • How to copy an image to a file?

    I'm under .NET Framework 3.5 2008 coding in c#.

    I have a collection of parcels posted using the ScatterGraph class. I include these parcels in a a document word; This is a great collection (several hundred).

    Therefore, I plan to save the plots in the form of images and then include the images in the report.

    First fundamental question: how to save a trace to a file

    Secondly: is it possible to copy all the plots together into a word document?

    Thank you very much in advance for your valuable assistance.

    GL

    Hi actarus,.

    Here's what I did to create a word document with text and images of scattergraph.

    1. right click on your project in the Solution Explorer and choose Add reference...

    2. on the COM tab, select Microsoft Word 12.0 object library

    3. click on OK

    The form that I created had a scatterGraph and a button. Here is the code that was added in the page high c# source file:

    using Word = Microsoft.Office.Interop.Word;
    using System.Reflection;

    This code has been added to the recall of the button:

    private void button1_Click (object sender, EventArgs e)
    {
    Save the image
               scatterGraph1. ToFile ("GraphImage.png", ImageType.Png);

    /*
    http://support.Microsoft.com/kb/316384
    */

    create the document
    Object oMissing = System.Reflection.Missing.Value;
    Object oEndOfDoc = "\\endofdoc"; / * \endofdoc is a predefined bookmark * /.

    Start Word and create a new document.
    Word._Application oWord;
    Word._Document oDoc;
    oWord = new Word.Application ();
    oWord.Visible = true;
    oDoc = oWord.Documents.Add (Ref oMissing, Ref oMissing,
    REF oMissing, ref oMissing);

    Add a paragraph at the beginning of the document.
    Word.Paragraph oPara1;
    oPara1 = oDoc.Content.Paragraphs.Add (Ref oMissing);
    oPara1.Range.Text = "Heading 1";
    oPara1.Range.Font.Bold = 1;
    oPara1.Format.SpaceAfter = 24;    pt 24 after paragraph spacing.
    oPara1.Range.InsertParagraphAfter ();

    Insert a picture
    String fileName = "C:\\_support\\_reports\\project\\project\\bin\\Debug\\GraphImage.png";
    Object oMissed = oPara1.Range;
    Object oLinkToFile = false;  by default
    Object oSaveWithDocument = true; default
    oDoc.InlineShapes.AddPicture (fileName, Ref oLinkToFile, Ref oSaveWithDocument, ref oMissed);
    oDoc.InlineShapes.AddPicture (fileName, Ref oLinkToFile, Ref oSaveWithDocument, ref oMissed); image added again for the pleasure
    }

    See the Microsoft KB linked above for more information on formatting.

  • Problems with Newton Raphson zero Finder

    Hey all,.

    I am trying to solve an equation with Newton Raphson zero Finder, but I can't get a result out of it, with this data set. It works with other sets of data, that I tried, and I solved this instance of the equation with another program and got the result I wanted (about 20), but for some reason, I have solve difficulties in Labview. I have attached my VI and the data that I use. This is what the formula, entering the Finder VI zero is supposed to look like:
    ((t * ((0.05594 * t + 5.2842) * t + 137.37)) / (1000 *(t+246))) - 1.987512E - 2
    As I said, I get the result I want, when I solve for this specific instance of the formula with another program, so I know that the formula is correct.

    Please let me know if you have an overview

    When you say it looks like the right place for zero, he returned to 19.94484, which seems to be about 20.

    1. connecting an indicator to the Newton Raphson zero error output Finder.vi gives-23021: two function values have the same sign. Automatic error handling does not pick up screws errors that have no deviation of the clusters. This error indicates that the zero is that not between the search terms or there are several zeros in this range.

    2. the default start and end values are 0 and 1. End changing to 100 product the result above. It seems that another zero 246 so that you can't do the limits too far.

    It is often useful to view data. Plot the data and the results of the formulas on the graphs to see what is happening. Using Eval Single-Variable Array.vi I get this:

    Note that it shows two passages to zero.

    Although it doesn't seem to be a problem here, with very large or very small values can lead to digital errors of overflow, underflow or retransmit.  Multiplying your table of spectrum and the initial settings by 1E23 and then later by dividing by the same factor (if necessary) could help avoid such problems.

    Lynn

  • Need help on a Canon DSLR upgrade

    We had the original Digital Rebel and he failed and guaranteed has been replaced with an XTi at some point years ago.

    My wife does most of the time catalog photography to Web resolution. It has no needs print, high number of pixels is not really necessary. This work mainly includes the clothes on the mannequins but also jewellery and bags/shoes/belts in a light box. Sometimes really close/macro for the stamps of jewelry is very convenient.

    She is currently the target EF 17-40mm f / 4L USM on the XTi.

    This camera has been well, but is to be upgraded.

    My wives main concerns:

    -LIGHT LIGHT LIGHT-> I'm not an expert, but she always seeks to get more light in his pictures. We have umbrella lights in his studio with high 5000 lumen k lights and a few other types of low-cost video-lights to increase the light. Even with these, she's always experimenting ISO higher and one additional lighting.

    -Rapid fire. The XTi when using the built-in flash will often 'busy' and him to wait to take the next picture. Haven't tried a flash add-on to see if it's better.

    -Light-> she's a small person and a lighter camera with long sessions of photography will help.

    I was watching the SL1 as an update in our price range ($ 550 with goal by default or not). It seemed small and relatively the same characteristics than the 60 d/T5i and not far from the 70 d. The 70 d does not have better specs than the SL1, but the price range of 1000-1100 does not seem worth to its application. I think it would be money better spent on a better objective?

    The SL1 seems like a track for his goal? Any recommendations of lens?

    techjedi wrote:

    I thank you all for your continuous advice.

    I think we'll go with the T5i because extra points AF seems valid for any other use in the future outside the studio, and since the cameras are under $ 50 from each other, it is quite valuable. The SL1 lighter seemed attractive, but she already uses the XTi which is similar in size to the T5i and never really reported problems with weight.

    Skirball, I am interested in your recommendations for manual flushing. In addition, if you can recommend good books on studio with lightning lighting arrangements, let me know, they would probably make good gifts and we do not want to read and learn and not only wait for others of us tell how to configure things.

    Thank you once again!

    I'd be happy to.  Just a note on the T5i.  There is actually no more AF points, the points he has are all cross sensor.  However, a difference of $50, it's smart calling in my opinion.

    On the lights (my favorite subject

    I highly recommend manual only lightning (flashes).    The learning curve is just a bit more delicate than eTTL, but manual is more consistent, controllable and it will be much cheaper.  Another disadvantage to splinters is that there is no modeling light, if you don't see where the shadows are until you take a picture - but it is mainly for creative Flash photography, by the sounds of what makes your wife she will have some basic configurations and won't bother with it much.  And a final on the flank, batteries.  I don't know what kind of rate you're wife shoots - are we talking dozens, hundreds or even thousands per day?  If it's on the high side then batteries are going to drive you crazy.    If it's a few hundred a day then batteries are fine as long as she's ok by placing them in the charger each night.  If we are talking about the tens, then a set of batteries will last a week easy.

    In view of these limitations, the absolute leader in off-camera manual flash is the Yongnuo 560 series.  The flash of 560III built in the RF Receiver, so you don't have to worry about cords or the line of sight or additional sensors.  The best part is that they cost only $70 and are more strong enough for your wife to shoot at ISO 100 and not even max flash.  Add to that with the YN-560-TX transmitter, photo that goes on your camera and you can control the power level and zoom all the 560III blinks directly from your device.  It can also control the non-560III with an extra receiver flashes, but it looks like you don't have to worry about this.

    I recommend 3 flashes, as well as the transmitter.  Looks like you already have light modifiers and so on.  3 flashes can have a light touch, fill (or just another button for pictures of products where you usually get rid of the shadow), and it leaves a for your background if necessary.  That's $260 for 3 flashes off-camera with RF triggers - you won't beat that anywhere.

    Trigger (should be 1 of them):

    http://www.Amazon.com/Yongnuo-YN560-TX-wireless-flash-controller/DP/B00LQH3NI2/ref=sr_1_2?ie=UTF8&qi...

    Flashes (as much as you want, but I wouldn't take less than 2):

    http://www.Amazon.com/Yongnuo-YN560-III-USA-Speedlite-integrated-receiver/DP/B00I44F5LS/ref=sr_1_2?i...

    Of course, you also need the AA batteries.  The gold standard is the Eneloop.  Not cheap, but worth it if you shoot a lot of flash:

    http://www.Amazon.com/Panasonic-ENELOOP-generation-pre-charged-rechargeable/DP/B00KQ2NA68/ref=sr_1_2...

    Looks like she got modifiers.  Umbrellas are fine, I've used them for many years myself.  But I moved to softboxes a few years and now my umbrellas only get used to photograph architectural.  If your wife has a studio and space (i.e. does not need something which can be folded for storage) the Fotodiox are amazing quality for the price.  They come in a variety of different forms, just make sure that the connector is for a flash, not a studio light.  Here is an example:

    http://www.Amazon.com/Fotodiox-Flash-2436-CA-diffuser-Speedring-Speedlite/DP/B005ODJF4U/ref=sr_1_9?i...

    Otherwise there are several cheap, foldable style softboxes there, which give more control an umbrella (but not necessary, umbrellas are a fine option).

    As for the books.  I know a little, but anything in a book is also on the web (although the web is not a good gift).  Make sure you just to check David Hobby (aka The Strobist), Web site.  There is everything you need to know and more info on flash.  Here is the beginning of the "class":

    http://strobist.blogspot.com/2006/03/lighting-101.html

    Your wife should know some of them to work with the hot lights, but there are fundamental differences between flash and continuous (warm light) that needs to be understood.  This site will explain the.  Regarding donations, I own the book Syl arena (another well-known 'Strobist'), the aptly named speed lighters Handbook:

    http://www.Amazon.com/Speedliters-Handbook-learning-craft-Speedlites/DP/032171105X/ref=sr_1_sc_1?IE=...

    Really well written.  Just keep in mind (instead of him be overwhelmed with all this info) that what you try to do is relatively easy - small fixed objects that you try only lighting, instead of really creative.  Paste in a light box and put a flash on each side.  Or paste a soft box on each side at 45-45 (potrait photographers everywhere are dug at the thought) and a third on the backdrop, if you want white.  If you want black, better yet, just don't use a light (it's much, much easier with flashes that it's your current setup).

    Sorry to ramble... I love talking about flash.

  • Sound devices: a disaster of misorganization and incompetence

    Using XP Pro, SP3. I use Skype and Gmail to talk online.  I have a couple of options different microphone (USB and normal) and 2 different output options.  Switching between these 2 options for the input and the output should be an easy task, even for Microsoft.  Its just one or the other.  How difficult could it get?  Yet the levels change, change settings, options of no entry from me.  Its absolutely mind-boggling how a system could be designed with such total contempt for the user.  You go to sounds in the control panel and the options are dispersed in any place.  You have Volume, Audio and voice.  There is an Advanced tab in the Volume that suddenly gray out when I use a different output.  This is where you can turn off the microphone.  Therefore one impact on the other.  Stupid how?  In Audio, you have a Volume tab which seems to do the same.  Unnecessary redundancy.  But if my other output is selected the mic goes away one of the options.  It is an output - yet it replaces an entry.  Dumbest design.  Then we go to the vote.  The output it can be different.  So who's priority?  I think that once I've selected an audio output and press on apply it would show in her voice.  But none.  In addition, sometimes the microphone is cut off for no reason.  Then his food back then it must be cut, but it is sometimes impossible to control when the bad output is selected. See how much fun can be a bad design?

    Its like this program has been designed by different people, do not all communicating with each other, each doing their own thing, not think about the other parts of the system.  At first, I thought it was my own lack of experience, but after several days with different programs to play with this disaster, I now know it is as I suspected initially: a design nightmare.  One of the poorest Microsoft designs ever.

    In addition to all mechanically and saw only one entry and exit which sees this stupid computer, is there another way to do this work?  Most people need this document fall within these parameters:

    2 MIC OPTIONS: close the beach or the entire piece (speaker), USB or analog.  The microphone of the range could be managed by the webcam microphone.

    3 OUTPUT OPTIONS: speakers, headphones (for audio), helmet (to wear them long, cool comfort and a short-range, anti-noise microphone).

    There must be a better way than Microsoft's convoluted design.  It would be great to have their word and output selections managed by keyboard shortcuts.

    If the software is not available, then you need a box mechanical, inputs/outputs, placed right next to your keyboard.  It is probably the most sensible solution, except for additional wiring and the cost of doing because he sure doesn't seem to be anything on the market right now remotely meet these needs.  Which seems very strange that most used his computer for audio chat and everyone knows that a helmet is better to let the room know what the other person is saying if you use speakers.  People who use a headset with their cell phone bluetooth could find that works well on their computer.

    Hello

    If you go in both sense between the two programs, which can be attributed to volume adjustments because each would also have their own levels of volume etc.  I suggest that you test both for the same settings and see if there is a difference.

    Thanks for the comments, you might want to know the lifecycle of XP:

    http://Windows.Microsoft.com/en-us/Windows/products/lifecycle

  • Router EA6900 IP comes back to original

    I have an EA6900 which is IP address changes every few weeks back to the orginal 10.x.x.x network.  The initial installation, it was reconfigured to a192.168.x.x and we have a several devices with static IP for when he comes back, these devices become inaccessible.  Someone had this problem? I fight the powah or simply configure my static devices in the 10.x.x.x?

    If the router changes its range of IP and DHCP default 192.168.1.x to 10.x.x.x address, this is due to an IP address conflict detected on the network from somewhere (self Heal)

    Usual causes are:

    1. NAT behind a NAT, the ISP Modem is to give the router WAN one IP address in the 192.168.x.x range
    2. Another device on the network has the same IP address as the router
    3. Another DHCP server is handing out IP addresses in the same IP range as the router.
  • WRT300N and Asus Eee PC 1002 H does not play nice-Wifi N

    I have an Asus Eee 1000 H and 1002HA Eee. Both are running XP. I have a linksys WRT300N. All are supposed to support Wireless N. I got the 1000H running to 135 Mbit/s, but my most recent 1002HA runs at 54 Mbps, even right next to linksys. These are the settings of the WRT300N.

    Network mode: mixed - if I select wireless only, it does not see the SSID but will not connect do not.

    Radio band: wide angle: 40 MHz channel

    Standard channel: 1-2, 412 GHz SSID Broadcast: enabled.

    I use WPA with TKIP. Key renewal: 3600 seconds

    Beacon interval: (default: 100 milliseconds, range: 1-65535) DTIM interval: (default: 1, range: 1-255) threshold of Fragmentation: (default: 2346, range: 256-2346) RTS threshold:

    The driver installed is the version of the driver 7.6.1.149.  This is the 1002H Wifi driver

    Well, I tried WEP and WPA, and both do not work.  But I went to WPA2 and that worked...  I give up.

  • I want to get the best on my router (Port Forward questions)

    I use the WRT54G2 router and the wmp54G. I'm trying to get games like America's army and Team Fortress 2 to work properly. I've assigned my static Ip pc using the guide portforward. I forwarded the necessary ports.

    I can't connect to my account on the U.S. military, and I can not connect to servers on Team Fortress 2. I tried to disable my anti-virus and firewall but still no luck. I'm doing it on the pc with the wireless connection.

    Any suggestions?

    I also have another question: when transmitting ports or using DMZ, what IP address I send? The pc connected directly to the router or the pc which is using ports (one wireless)?

    BTW, MY ISP is Comcast

    In most cases, you can use the DNS proxy server that is built into the router at 192.168.1.1 (address by default), but in your case would be in 192.168.2.1

    It is preferable to use the DNS proxy server.  The router keeps track of the actual Internet DNS server addresses from your ISP and transfers data to the appropriate DNS server.

    If the DNS server of the router proxy does not work, then enter your true Internet DNS server address in your computer.

    In addition, I see that you use the et.102 adresses.101 in your computers.  Your range of DHCP servers by default est.100 thru.149, so unless you have changed it, you use illegal LAN IP fixed addresses in your computer.  This could be the cause of your problems.  Note that all fixed LAN IP addresses should be outside your range of DHCP server.

Maybe you are looking for