Range of Wi - fi

Similar Questions

• Airport Express does not extend WiFi range

  OK, I posted a long time will cost about an airport older Gen Express not extending my wifi range when implemented to extend (wireless) and connected to a network of Apple (Airport Extreme). No solution, so I gave up.

  Still frustrated by the lack of a strong wifi signal to my back door / Garden (it is a small house!), I bought a new Express and set it up again to extend my current network, placed it on my window sill back room (where I get a pretty good wifi signal on my iPhone and iPad), but about 6 feet of him, the other side of the glass in my garden I get a flicker of 1-2 bars the signal strength that is de-energized intermittently.

  I get no significant (or even vaguely reasonable) increase in force wifi when I approach from the Express, but increase next to the extreme.

  Or should I put either the express until properly (I'm sure I'm) or I am fundamentally misunderstand the term "extend a wireless network. Alternatively, I bought 3 years 2 defective Express apart.

  Can anyone help?

  See you soon.

  You have a handy Mac laptop? If so, we can run tests to understand the current quality of the signal at each location where you want to have a Wi - Fi access. If all goes well, we can find better place to place your Express extension for your goals of networking.

• Apple TV 4 Dynamic Range

  There is certainly a problem with the dynamic range on the Apple TV 4.  Watching movies on iTunes, the difference between strong and soft sounds is considerably reduced. This has happened since the Apple TV 4 has been released. Yes, the setting for the dynamic range reduction is on OFF.

  As I understand it, the reason is that the Apple TV 4 manages audio decoding. There is no option to send a raw stream to an external decoder as an A / V receiver. Basically, the Apple TV 4 does a bad job at decoding.

  There is a full thread on this on MacRumors. Many people are upset.

  Apple really needs to fix this. Watch movies on the Apple TV is terrible and I started renting on Vudu movies using my Roku box because of this problem.

  < link published by host >

  The real link to the thread is here: http://forums.macrumors.com/threads/poor-dynamic-range-even-with-full-enabled.19 51471 /

• is it possible to export each chapter in FCPX like a movie without using the tool of the range separated

  I have a movie I created with 26 chapters in there.  I want to export all the individual chapters as separate movies.   I know it's possible by making each chapter using the tool of the range and export everything that is selected.  But, I'm looking to win time by selecting all the chapters may export both.   Is this possible?

  Thanks for any help you can give me.

  NO you must do them sequentially, even if you don't have to wait for it to finish before you can start the next. Stack them just to export in a sequential manner.

• How to set the subnet range when you create the wireless hotstop in mac

  Hello

  I create a wireless hotstop on my Macbook using the Internet sharing option. But she still attributes the 192.168.2. * subnet. How can I change this range for a * 192.168.100 as a user-defined.

  Thank you!!

  Jeff

  Unfortunately there is no setting in system preferences to change this for a reason any.

  If you really need to do this, you must do so through terminal to modify a specific file in a very specific way.

  NET-connection-sharing http://chariotsolutions.com/blog/post/Configuring-Network-used-by-Mac-OS-x-inter.

• Airport most convenient that the range extender today broke up after that put 7.6.7 at level

  I have two extreme airport connected with an ethernet cable, one for upstairs and one for down. One downstairs is set to extend the reach of the network wireless created by one on the floor. Also the one upstairs is configured in Bridge mode because I have a server that I use for DHCP and DNS, instead of using the airport for that. The server and the airport on the floor are connected to the same network switch.

  Everything worked very well under firmware 7.6.4. But after the upgrade to 7.6.7 and without changing any settings, now my network is terribly broken. No devices can connect to the wifi network, and the network interface on the server shows errors like "has received the package on eth1 with own address as source address" and "Null supervisors, receiver of broadcasting not ready."

  The problems went away by unplugging the airport down.  But this isn't a good solution.  I want to have both, and I want that they function as they did before.

  When you have airports connected by ethernet... YOU MAY NOT USE EXTEND WIRELESS.

  The result is the following.

  Server shows errors like "has received the package on eth1 with own address as source address" and "Null supervisors, receiver of broadcasting not ready."

  You create a loop where packets are going around and around the system.

  If you say you had it past 7.6.4 firmware and it was broken by 7.6.7 well, I can only say that he has never worked on any firmware with a switch or other device which is able to break loops.

  Return to 7.6.4 and see if it still works.

  I found that Wireless extend over 7.6.7 is more restrictive than the firmware as soon... I highly recommend 7.6.1 for it... as I can show 7.6.4 reproducible problems but it is also a case that former airports are losing just their WILL... I had success extend wireless who recently failed... and it's purely too big range... considering that it used to work properly. Which shows that the products are just slow decline.

  I also get numbers of the absurdity of airport utility that I still don't understand.

  for example. I got the link to work on a new Gen5 TC (refuses to bind on Gen4 TC)

  

  If I click on the unknown link, it shows a link 450Mbps speed which is impossible. The RSSI is also what you would get with the two devices within 1 foot of the other (30 cm) No 20 M through several walls and a floor.

  The end of TCgen5 by using the utility v5.6, I see the actual rate...

  

  The link is showing 54 Mbit/s and a signal-78dB which makes much more sense. Unfortunately the other end does not record again... and the value 0 for the noise is also wrong.

  Noise on the latest diagnostics wireless displays 0 for a lot of wireless.

  

  Something rotten in the world of the Apple to the end... What with the CCMM giving a total mess to Airport utility if people use it...

• Unable to choose the range in iMovie

  Unable to choose the range of iMovie 10.1.2

  Hi, Jeff.

  You can select a range inside a clip with your clip in the timeline, placing your cursor on it and hold the 'r' key when you drag your cursor over the clip while pressing your mouse or track pad.  The range will be described in a yellow box.

  To select a range of multiple clips, select the first clip, and then select the last element while holding down the SHIFT key.

  Best,

  -Rich

• I am trying to add a N300 wireless range extender to my house.

  I am trying to add a range-extender N300 WiFi at my home.  I have a router from apple.  I am trying to connect with WPS. I am looking for a WPS button on the router from apple (according to instructions), but fails.  Is it possible to use this extension?

  The N300 has a web interface, you should be able to see the network transmitted the Apple it. Note that it may not work. Another unit of Apple would be simpler and better.

• Is there a way to block a range of numbers?

  A group of Washington calls several times a day and I continue to block the numbers, but it's always a slightly different ending every time. Is there a way to block a range of numbers?

  No, it's not

• Search for files in a folder by date range?

  Trying to sort through a few photos in a folder, all confusing to form various phones and cameras and their Photos for Mac app development.

  Is there a way to search for specific dates in some way, via a recommended application or something please? I am busy making albums, for example Christmas 2002, 2003 Christmas and if you are looking for the picture files that are in the range say December 20, 2002-January 2, 2003. They are all in different folders for the moment on an external drive, so scattered everywhere.

  Can anyone help please?

  Thank you

  If you import the photos into the Photo app, they sort by date.

• time capsule airport lose wifi range

  I've been using airport time capsule as a router and machine time about 1.5 years and suddenly the WIFI range

  come fall, I use the modem cable HI Speed with 10 loading MB and 150 MB down when suddenly the speed dropped I still get 10 but only about 92 or less down, unless I use an ethernet cable that brings speed to 150 are lowest, (PS), I ran the on time capsule ethernet cable to my Mac mini so it becomes what should be diffuse but do not do a very good job more.

  question is there something that can be done to solve this problem everyone knows this problem, thanks for any help that can be provided.

  What exact model of the Time Capsule (TC) do you have? Given that the question appears with the wireless, you live in an area with a high concentration of other networks Wi - Fi? An apartment complex or a dorm maybe?

• range of values fall down

  Hello

  I am a newbie in number, form coming Excel.

  In Excel, for any cell, that a range of values can be defined, the value of the cell can be so defined by selecting a value in the given range via a drop down window.

  The range of values can be set by selecting a list of values in an Excel sheet.

  How can I do this in numbers?

  Thank you

  André

  Hi Andre,

  Looks like a context menu.

  ""The range of values can be set by selecting a list of values in an Excel sheet.".

  This part works a little differently.

  List of values in a column. Select all of the cells containing the menu items. Click the Format brush to open the Inspector to Format.

  Choose 'Cell '.

  Click on the menu format (default: Auto) to open the drop-down menu, choose "context Menu".

  Click Start with first point or start with Blank.

  Now each of the cells in the form of a cell from the Popup Menu, each with all the menu choices listed (more ' none' If you have chosen to start with Blank) which can be copied and placed in a cell in the table, another table in the same document or a different picture in a separate document.

  The individual menus can be changed in the Format Inspector (cell).

  For more information on the cells of the context menu, search for "pop" in using numbers.

  Kind regards

  Barry

• Mac Book Pro, outdoor WiFi antennas work to extend wi - fi range when plugged into USB PORTS

  Outdoor WIFI antennas work if plugged into the USB port on the Mac Book Pro. If they do, those who extend range of transmission and reception wi - fi?

  Sorry, but I've never used an external USB wifi antenna but if you describe your use case a wifi Repeater/Extender can be a good option for you. https://www.repeaterstore.com/pages/WiFi-booster-Repeater-Extender-differences

  If the option is not a Repeater/Extender so will have to wait for someone who has used an external USB antenna down to.

• Absolute cell to the cell range reference

  I would like to refer to a range of cells on one worksheet to another, all in the same worksheet.  When shoves and columns are changed on the source worksheet, I would like the second sheet to reflect this change, so I think that I need the absolute references.  I know I can do this for a single cell by making reference to the cell, by clicking on the arrow and horizontal and vertical locking.  Is it possible to do it for a range of cells?

  Thanks for your help.

  Hi GB,

  In the example, copy table cells reference the same cell in the Source, using the INDEX table.

  

  The formula entered in B2 is the following:

  B2: = INDEX (Source: $A:B,ROW(),COLUMN()))

  That the form is completed on the columns, the reference to a column remains the same, and the column reference b change to match the column containing this iteration of the formula.

  The reference by specifying only the columns where a range is average planned is in all cells in the column.

  Complete the form on the left to A2, then fill both down to line 3.

  Add rows or columns in the Source table and filling the new cells of data has no effect on the copy table.

  

  The copy table should be expanded using the column and handles command line at the top right and bottom left of the table, or the control handle of lines and columns in the lower right corner (visible on the first image of th, where a single table is selected)

  As the rows and columns are added, numbers automatically fills the formula into the new rows or columns.

  

  If the copy table is extended beyond the size of the Source table, 'extra' columns or lines contains an error of "bad reference."

  

  Add lines to the source table removes the error in previously 'extra' copy lines, because there the range, specified as the "entire column" automatically sees the lines added.

  

  

  The column added, however, must be removed from the copy, and then added to copy the formula without error in column C in column D.

  Kind regards

  Barry

• How to find how many times, how many numbers in a range of numbers (number of lines and columns) has been repeated (numbers 3.6.2)

  Hello

  I have a range of numbers from B2 - B11 until the G2 - G11. For example:

  31	7	28	10	4	17
  20	13	44	2	1	39
  32	45	39	4	10	25
  26	38	27	43	12	3
  42	35	37	1	34	21
  13	39	11	14	5	37
  21	33	34	4	13	10
  31	14	1	24	35	3
  20	2	24	27	22	30
  10	34	36	32	3	27

  I would like to know who among these numbers have occurred and how many times. For example (just to have as an example): number 10 repetitions 5 times, number 13 repeated 3 times, 24 repetitions 9 times.

  Repeats = duplicates.

  I want to know all the repetitive number and how many times they repeat.

  Is there some kind of formula I can use to get there. It would be good to have the sorted result. For example:

  32 repeats 10 times

  24 repeat 9 times

  6 reps 8 times

  5 repeat 7 times

  22. repeat 6 times

  10 repeats 5 times and so on.

  Hello

  Problem of three steps:

  1. Determine the distinct values
  2. Count the number of times each appears in the table
  3. Sort by value or frequency (or both).

  The first step is easily handled by copy separate Automator Service, a Service of Automator, written by SGIII. A link to the file in post June 21 of the SG in this thread: Re: Analyzing column (maybe not the correct wording)

  After downloading and installing the service, select the cells containing the numbers, call the service, and then select the first regular (ie. non-header) cell to a new table and the dough.

  (The following assumes the new table has a header row, no column header, and you have selected - click - cell A2 before pasting.)

  You will get a list of distinct numbers in a single column (A2 - A34, of your sample and support of note).

  To count the numbers:

  In this example, the existing table is named 'Table 1'

  Enter the following formula in B2 the new table, and then fill up to the last line of the column B:

  = COUNTIF (Table 1::B:G, A)

  Results should be as shown:

  

  Sort the results on column (value) or B (frequency)

  Two types (A, then B) will be put in order of frequency, with values appear the same number of times sorted by value within this group.

  Kind regards

  Barry

• How can I change the range of pitch bend of a soft synth?

  How can I change the range of pitch bend of a soft synth?

  Tell me what synth and I'll tell you how to change.