Rash, the problems of computer control: use of 100% of the CPU, hard drive is filled Up, & drivers Drop Off - what happens?

Similar Questions

• has had to replace the internal hard drive! need help!

  Hi, laptop HP HDX - 1056CA

  My internal hard drive is totally dead after 2 years (warranty expired), and I had to replace it. I dropped in the new hard drive. But I don't know what are my next steps

  Do I really need to refer to the recovery discs - and they will work on a new hard drive? -I don't mind send away if that's what is needed, but I can't recover my old data, I hope that I can just download the drivers and leave with the machine... (also I go to work on Monday for 2 weeks at an oil rig, records will not be here in time and I won't be able to stay in touch with my friends and my family like the network is very limited as to what we can access if the computers in the Organization).

  can I use my desk top of the page to download and burn the recovery discs? can someone link me to the right place (HP HDX16 - 1056CA).

  My other question is that I have upgraded to windows 7 from Vista, when I ask to do recovery disks I have ask for the vista version and upgrade again (will be microsoft / the computer accepts the only time only upgrading key again?)  or should I go for the version of windows 7?  I need to re install the windows original vista and then switch again to win7, being that the computer has been configured for vista before the upgrade.

  Thank you very much for any help or insight people can give me! I really appreciate it!

  Hi all

  I had a BBQ and three guests oil and gas software and refused to feed them until thelaptop has been fixed.

  They threw the XP disc across the room and were able to start the player directly at the exit of the disk upgrade of windows 7 using the Custom Installation option.

  I'm afraid I can't give you more information, others that there is no need to first load the XP or the use of the USB box with the zip file in in order to recognize that the new installation drive.

  Thanks everyone for all the help offered here here.

• Transfer of files from the old HARD DRIVE to new computer without an old computer. (He's dead - can not use) I have the hard drive, but need help to transfer my old files and settings.

  ·        My old Win XP computer died - it is completely unusable. I bought a new PC with Win 7 Pro and 1 TB. I still have the old HARD DRIVE (250 GB) which I have attached on the new computer using an external enclosure supports SATA drives. The external hard drive is connected to the computer in USB 3.0. I checked that the new computer can see the external hard drive. (I also used for backups by changing the hard drive with a 2 TB drive 'mass storage' - that works.)

  I searched the internet for possible solutions and found no help. If the transfer of files from Microsoft would change the disc to analyze, it would be simple. But if I select the OLD computer it scans the disk I'm on (new) - automatically.

  Is there anyone who has had the same problem? He must be because computers die all the time and people buy new computers - who then, somehow, they get the former transferred files. I could do it manually, but that wouldn't change the settings. Last resort would be to buy an old computer XP (SATA), replace the drive. Transfer the files, and then sell this computer.

  You may be able to recover your data files, but I hope that you will set up your new system to automatically backup a second internal hard drive or an external USB hard drive.

  This suggestion may not work, but it's worth a try. Buy an external USB drive enclosure. They come in two sizes 2.5 "for the portable computer drives and 3.5" for desktop disks. You can purchase adapters for 3.5 "envelopes so that they can also be used with a portable player. Place the hard drive in the enclosure and connect to a USB port of another computer. Several hard disks are more able to start, but the contents of the disc can still be accessed, read and copied from the disk because you do not use the operating system on a failed disk.

  Here is an example of the type of device, I suggest:
  http://www.amazon.co.uk/s/?ie=UTF8&keywords=external+hardrive+enclosure&tag=googhydr-21&index=aps&hvadid=14388537836&hvpos=1t1&hvexid=&hvnetw=g&hvrand=556960941559985931&hvpone=&hvptwo=&hvqmt=b&ref=pd_sl_32uorbwbuk_b

  You need only to the speaker, that you see are not necessarily more expensive. Thereafter, you can put an old hard drive usable, an abandoned because you need a larger drive internal, in the enclosure and use it as additional external storage.

• I have a problem with the external hard drive not detected on the computer as a disk.

  I connected an external hard drive toshiba via USB on this victory 8 x 64 computer that is also a toshiba and the computer doesn't show as a reader in fact it shows that he as a device so what gives. This thing have not even a letter such as C: (what internal hard drive) I watch the little arrow to show you, it is prudent to remove it so it appears here, what does I have a drive bad ext or what? Oh yes, I have tried all my ports even

  Hello

  I suggest you to assign a drive letter for the external hard drive and see if it helps.

  To do:

  a. press the Windows key + R and type diskmgmt.msc.

  (b) if the hard drive recognized in disk management and if there is no drive letter assigned, I suggest you do a right click on the drive and assign a drive letter and check if it helps.

  c. right click paths and the drive letter Change.

  Do one of the following:

  ·         To assign a drive letter if it has not already received, click Add, click the letter you want to use and then click onOK.

  ·         To change a drive letter, click change, click on assign the following drive letter, click the letter you want to use and then click on OK.

  d. restart the computer and check.

  Hope that the external hard drive will not be detected after that.

  Please report if you encounter any problems related to Windows and we will be happy to help you.

• My computer does not recognize the external hard drive that my virtual machine is stored (continuous thread solved problem)...

  A new problem arises.  After I crossed the wire attached and mounted my VM on the external hard drive, I can access is no longer my hard drive.  Y at - it a trick to recognize again?

  http://communities.VMware.com/message/1166805#1166805

  Ben, well talk to you again and let me know what external drive you eventually buy and if it was the controller or the drive in the other external drive.

  Woody

• My motherboard has exploded and I have the hard drive. How can I copy the address book for a new installation on a new computer from the old hard drive?

  I have the old hard drive in a USB enclosure and connected to the computer again. I have installed firefox and you need to have the address book (critical) copied and inserted information from address book on the new computer. I hope that there is a file I can replace easily?

  Firefox send an e-mail, it's strictly a web browser.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, check out this forum for support.
  https://support.mozillamessaging.com/.../home
  
  or this one
  
  http://forums.mozillazine.org/viewforum.php?f=39

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Computer "not responding" when I connect the external hard drive.

  Hi all

  When I connect my external hard drive to my laptop, it is detected and the icon for the material appears in the taskbar background. But when I go to my computer, it happens that does not. I can always open other programs etc that are not related to the hard drive, but nothing to do with the hard drive "fails". As soon as I plug it on, the laptop starts responding again. I tried it on another laptop and the same thing happens.

  Any ideas?

  Hi Wendall81,

  -How long have you had this problem?

  Follow the steps below:

  Method 1:

   

  Step 1: Boot in safe mode and check if the problem persists.

  See Advanced startup options (including safe mode) for more information about starting in safe mode.

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  See How to solve a problem by performing a boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

   

  Run a check disk on the external hard drive.

  For instructions, see check your drive for errors .

  Note: If any bad sectors are found by running the check disk utility and recovery of the attempt of bad sectors option is checked when checking the disk for errors, data in the bad sector can be lost as they tried to recover bad sectors. Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How to fix a problem with the computers hard drive?

  I can't find a way to solve this problem.

  

  Hello

  Test the hard drive.

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And you can also use this method to test your hard drive:

  "SeaTools for DOS.

  http://www.Seagate.com/support/downloads/SeaTools/

  "SeaTools for BACK tutorial.

  http://knowledge.Seagate.com/articles/en_US/FAQ/201271en

  See you soon.

• Seagate: the external hard drive is not displayed in my computer

  My seagate external hard drive does not show in my computer and also the Disk Manager but its shown in Device Manager. help out me. I have a lot of data in it.

  

  

  Nitesh salvation,

  Thanks for posting your question in the Microsoft Community forums.

  I understand from your description you have posted, that the external hard drive is not recognized by the computer of Windows 8.

  Before you continue with the troubleshooting steps, please answer the questions below.

  (1) have you checked with different ports or different computers?

  (2) remember to make changes before this problem?

  (3) you are able to detect the drive in disk management?

  I suggest to follow the steps below and check if the problem persists.

  Method 1: Run the troubleshooter of material and check out la.

  Follow the steps to run the Troubleshooter:

  (a) press the Windows key + C on your keyboard to show the charms.

  (b) type of Troubleshooting , and then click solving problems under settings.

  (c) now, type Hardware Troubleshooter in the option Search .

  (d) click on hardware store to run the troubleshooter.

  If you are able to detect the drive in disk management, I suggest you to assign a letter.

  Method 2: Assign drive letter:

  The disk management.

  To assign a drive letter if it has not already received, click Add, click the letter you want to use, and then click OK.
  To change a drive letter, click on edit, click on assign the following drive letter, click the letter you want to use and then click OK.

  To remove a drive letter, click on remove and then click Yes to confirm that you want to remove.

  You can also check out the article below and follow the instructions.

  Why isn't Windows does not find my device?

  Hope this information was helpful, if you need help, feel free to post. We will be happy to help you.

• Computer Asus laptop has ceased to recognize the external hard drive Hitachi

  The external hard drive was working ceased to be recognized. I troubleshoot-conducted pilot issues, usb port, System Restore... nothing I've tried has worked. Suggestions?

  Hello Hunter.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. What is the model number of your PC Asus laptop?
  2. you made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because of corrupted USB controllers or device drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check. Please follow these steps:

  a. press Windows + W keys, type Troubleshooting in the search box and press ENTER.
  b. click on 'show all' and then click 'hardware and devices'.
  c. click 'Next' and follow the on-screen instructions.

  If this does not help, use method 2.

  Method 2:
  Uninstall and reinstall the USB controllers and check the issue. Please follow these steps:

  a. press Windows + X keys and click on Device Manager.
  b. develop a 'USB Bus controllers'. Right click on a device, and then click Uninstall. Please repeat this step for each device.
  c. once it's done, restart your computer.

  All USB controllers will automatically install.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Pavilion 15-p108ne: my computer laptop p108ne I hope that I can install Windows 7 Windows 7 drivers. But what was not in the site

  My computer laptop p108ne I hope that I can install Windows 7 Windows 7 drivers. But what was not in the site

  Hello:

  You should be able to use the W7 x 64 drivers and software of p000-15 t on your model, except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P000-notebook-PC-series/6936226/model/7174371

• HP Compaq Desktop Mod CQ511OF: W7, using the upgrade on the new hard drive disc

  Hello everyone; The 5 years, 320 GB hard drive on my HP Compaq CQ5110F desktop model is tired and I would like to replace it with a hybrid drive SSD Seagate 1 TB. My concern is that this computer has been upgraded from Vista to Windows 7. The vignette, I placed on this computer that came with the disc to upgrade the readings; "Windows Vista HmPm - Win 7 HmPm UPG fill HP".  So my question is can I use the drive of W7 upgrade to install W7 on the new 1 TB hard drive, the 'system' will use the product code located on the sticker provided with the upgrade disk? The computer is supported up to 1 TB Seagate Backup Plus.  The computer is, bicoeur AMD 2.5 GHZ, 32 bit, 3 GB of ram. I would be happy to provide additional information. I appreciate all the comments really. Thank you very much for your help, Oscarmint

  You cannot use an upgrade disc to install an OS on a new hard drive.

  You could clone the old hard drive to the new hard drive using a program like Macrium reflect free

  http://www.Macrium.com/reflectfree.aspx

• HP Pavilion 14-b017cl: follow-up on creating and using the USB key recovery to win 8 after replacing the bad hard drive

  I have 2 hp pavillion sleekbook model 14-b017cl'. I replaced the hard drive in my son after that she doesn't have the "optimized hard drive dst test '. I used my sleekbook work to create a USB stick recovery. I followed the instructions to use the recovery to Win 8 usb drive. When I started the laptop of my son, with the USB stick inserted, I got this message.

  PXE - m0f: exit pxe rom

  no bootable device-insert bootdisk and press a key

  Flash player Flash when I put under tension. I rebooted, you press F2, conducted an audit on the new hard drive, happened.

  Later, I inserted the recovery key in my laptop (that I used to create it) and it would not initialize to top. I checked the content to the flash drive and they seemed "Chargers", so it seems to be what I expected. It seems that the recovery USB STICK will not work if my own laptop dies. What I have to buy the HP flash drive, or I'm doing something wrong.

  Hi @gretschman7,

  Thank you for your query.

  I understand you are trying to perform a recovery from a USB flash drive, but you get the error "pxe - m0f: exit pxe rom.

  "no bootable device-insert bootdisk and press any".  You check the recovery media on your laptop as it is the same model and it seems fine.

  Looks like you may need to change the boot sequence. Here is a link to HP - performing a recovery system (Windows 8) HP computers that will help you.   Here is a link to a YouTube video which can also help:.  Performing a recovery of HP system on a laptop HP with Windows 8.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• HP Mini 110-3130NR and the new hard drive - how to create an image and use it?

  I want to replace the current hard drive to my HP Mini 110-3130NR of a new SSD.

  Ideally, I'd like to copy the disc hard integer on the SSD and then just swap hard disks (create a picture of the current hard drive work in the SSD).

  Otherwise, I have an external USB hard drive, so I could save the contents of the original hard drive and restore the image in the SSD. The problem is that HP Mini doesn't have a DVD player/burner, and I fear that it does not start via a USB device.

  Any help is welcome. Thank you.

  Respect!

  OK, all these programs did not help ast all, they still have some problems with SSDS (I tried an Intel X 25-M SSDSA2MH080G2K5 and an OCZ Vertex 2 OCZSSD2-2VTXE120G).

  This is so the fix for the problem, all you need a 4 GB flash drive.

  In Windows XP, Vista or seven plug the flash drive into the computer, open a command window (type cmd in the search) and type:

  DiskPart

  In the window that opened type:

  list disk

  Find the number corresponding to your USB key and type the following commands, replacing X with the number corresponding to your flash drive:

  Select disk X
  clean
  create the primary partition
  Select partition 1
  assets
  format fs = NTFS
  Assign
  output

  Then insert a DVD Windows Seven of INTAL, open the command prompt and navigate to the "Startup" folder in the Windows 7 DVD.
  Starting inside this folder, run the command:

  Bootsect/nt60 W: - replacing the W with the letter assigned to your flash drive.

  After that, simply copy the entire contents of the Windows 7 Installation DVD to flash drive, drive to the computer with the newly installed SSD and start from the flahs player.

  Enjoy!

  Someone click on the bottom "accept as a Solution.

  Respect!