Rather than update Dell Windows 10 birthday 8 Pro 5830

Similar Questions

• How to configure firefox to run as a single instance, so that all external links open within my existing window rather than opening another window?

  How to configure firefox to run as a single instance, so that all external links open within my existing window rather than opening another window?

  Sorry, there is no setting for what is built into Firefox.

  https://addons.Mozilla.org/en-us/Firefox/addon/tab-utilities/
  
  In the utilities tab > Options > links there is a preference to enable single window mode.

• Report dimensional hierarchy opens in a new window rather than the same window of dashboard in obiee

  Hi Experts,

  I created a hierarchy of dimension in obiee and created a report in analytics.

  I placed this report in a dashboard. But when I click on the hierarchy column it expands the hierarchy as expected but in a separate window rather than in the same window.

  Could someone help me on this problem?

  Thank you

  Patricia.

  If you are using a standard drill on the column hierarchy (without action) follow this path:

  • Open the page of dashboard for editing.
  • Find the section where your report.
  • Check the section "Drill in Place.

  

• Why install rather than update?

  

  When I opened the menu CC earlier, she indicates that Muse CC (2014.2) is updated, but she also asks me to install it. What gives? I did nothing yet, fearing that if I click on install it will add a second copy of the same version of Muse to my computer. If it says 'Update' rather than 'Install', which would make sense for me.

  Hello

  Try to clean the Muse and install it again.

  1. uninstall the cleaning tool using muse in the link provided below.

  http://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  2 disconnect from the CC and identify yourself.

  3 reinstall Muse.

  If it still does not work then we need to look at more options.

  Concerning

  Vivek

• ScanJet software installs in German rather than English - a Windows 7 problem

  I am trying to install HP Scanjet full feature and Driver for Windows 7 (32 bit) for my ScanJet G4010.

  On the software download page I choose English (American) and then downloaded setup_full_G4010_14 - 5.exe.

  My Windows 7 is in English.  EN is shown it is stated in the taskbar.  And to be sure, I went to the United States as my current location.  However setup_full_G4010_14 - 5.exe launched in German.  It offered no language option during installation.  The clean install HP G4010-is in German and offers no language option.

  How can this be?  Well, I'm in Germany.  I don't see how the installer or the installed software could not understand that I am in Germany, but the HP site could.  Has made the website to slip me a German version of setup_full_G4010_14 - 5.exe despite my choice of a version to English?

  A small experiment proved that my system Windows 7, not the site of HP, is the source of trouble.  I ran the downloaded file setup_full_G4010_14 - 5.exe even on a Windows XP system and the installation program launched in English.  The Windows 7 software and then installed on the Windows XP system, in English.

  This shows that the setup_full_G4010_14 - 5.exe is multilingual, and my problem is that it incorrectly detects my Windows 7 as German.  The software installed is not multilingual.  I checked this glancing in an installed help file .xml in the Windows 7 install.  It's in German.

  How can I get setup_full_G4010_14 - 5.exe HP to think that my Windows 7 is in English?

  Hello

  Open the Control Panel, then go to the language and region.

  On the Format tab, make sure that your PC is set to English.

  Then, open the administration tab and verify that the local system is set up in English and not German.

  Now restart your PC, open the HP software and check any change.

  Please let me know if this is useful,

  Shlomi

• RDP can connect to a session of console rather than on a Windows XP machine?

  Hello

  I have a Windows Server2003 running of the machine.  I have 3 'stations' running Windows XP SP3, which function as machines of execution to the work initiated by the application on the server. In essence, a repository server where all the jobs are stored and 3 execution servers that run the work at their time. The application (automate BPA Server 8 network Automation) should use the console session (ID 0) to manage the execution of the work.  We would like to use RDP to access servers running, but RDP automatically connects to the console session 0. Is there a way to force the RDP to connect to the console on a Windows XP machine not session?

  Thank you very much for any advice or direction, only you can give me!

  I think that you would probably get a better answer to this question in one of the TechNet forums where they support servers, as I do not have Windows Server 2003 in the House (and probably neither do any of the other people here ), you'll want to check with the server people who have more experience in this sort of thing.

• Recolor only wheel constantly change colors and color groups of color selections, rather than update the colors to work with new Illustrator CC 2015.

  Whenever I use the tool to work to redefine colors in Illustrator normal it shows just the colors of the selected artwork. It now automatically keeps showing groups of colors and rearrange the colors and their display oddly. When I click the pipette for "colors of the selected picture" it goes back to normal, but as soon as I close it and reopen it is goes back to color groups once again. Half the time, the colors do not yet exist in the work. The two background images are how its been looking and acting lately. The very last image at the bottom, this is how it was before the update. I use this 24/7 tool is incredibly frustrating, I know there are other ways to change the colors, but it's the quickest way to the type of work I do. Thanks for the replies!

  

  NORMAL RECOLOR TOOL

  

  Click on the eyedropper in the top right to get the colors of the work.

  This is a workaround for now.

• Windows 10 place 8 Pro (5830) Orientation, driver, Boot and camera problems

  I've had problems with camera for a while now. When I try to open the camera application, I get a message that the camera is not connected. I tried to solve this problem through different methods, none of which work, and all of a sudden, I start getting a problem of Orientation.

  A few days earlier, I tried to start, and the machine would only start in Portrait mode. Tilt, rotation, etc. would not alter orientation. I went into the settings and was able to make the meeting place in the landscape, and he should stay there until the next time I started. It always starts in a Portrait, a direction that I rarely use.

  I thought that my problem was perhaps a pilot and I checked the Device Manager. All seemed well. Then, I went to the Dell Support and ran the driver verifier. They told me that I needed to update the Chipset Intel Atom Z3000 Series driver, so I started the download. The download is finished and the machine began to install it. Almost immediately, I got the error that the "Installation failed." I tried again and again, failed.

  Then I looked in the Device Manager to see if I could find where this driver fits, thinking that I could remove the driver in the machine and it would be automatically installed. After carefully by the Device Manager, I found the driver.

  Either incidentally... at some point earlier today, I might not even the machine to start. It froze on the screen, you get before the login screen. About 15 restart attempts finally worked and the machine will start up again.

  I then tried to reset the Tablet and received an other error message that it could not be done.

  I'm in a world of pain, here. Any suggestions?

  OK, no responses, so here is my solution...

  I've broken down and decided to follow the hard way... to the format of the drive, then reinstall Windows 10 and all software. It's a great job. The first thing is to gather all the material needed to make this work.

  Necessary material:

  1. an adapter Dell to allow the power supply and USB connection full size at once. I have a Dell for $20.

  2. a USB Hub with a minimum of 4 entry slots.

  3. USB keyboard

  4. USB mouse

  5 USB Wireless Network adapt

  6 USB Windows 10 32-bit Installer

  7. a lot of Patience.

  Connect the USB Hub to the Dell adapter (1) and insert line electric adapter Dell, attach it to the tablet in the mini (or is this microphone?) USB port.

  Hold the switch and the Volume until you pass at the same time until the Tablet starts in the BIOS. Change the boot order using the Volume button upwards so that the tablet will boot from USB Windows 10 Setup and follow the instructions.

  Once win 10 installed, make sure that you have a wireless connection, and go to the Dell Support to download and install the Driver.Your Chipset coming 8 Pro should now allow touch screen and Orientation. Download and install no matter what other drivers you need and all your software. Set up and you're back in business.

  Wow, that took me 6 hours, but all works, now including my camera

• HP 15-af131dx: should I update windows 10 birthday?

  Should I update to windows 10 birthday? Someone had problems with the update?

  To install the updated Windows 10 anniversary choice you completely. Yes, people have had problems with the update. If you need the use of the computer and can not afford to face questions, you can wait on the installation of the update. If problems occur during or after installation, and you can manage it, you can install the update. I suggest creating a Windows repair disc and do a Windows system image backup before installing the update.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP EliteBook 850 G3: HP EliteBook 850 G3: its problems after the update of Windows 10 anniversary

  Hi people!

  After the update of Windows 10 birthday I have problems with my sound card. There are two sound cards listed by Device Manager. The first is "Conexant Audio of ISST" and the second "Intel High Definition Audio". I know not weather it was the case before the update. I just recognized it after the update when I had sound problems.

  In any case, on a sound start works on the other boot it does not work. It seems that Windows chooses the sound card, every time when it starts. Sometimes it takes the bad sound card.

  I tried to uninstall maps its and their resettlement. On the HP site, there is a driver for the Conexant map bot no driver for Intel High Definition Audio card. 10 Windows itself is not find a driver for this sound card. I also tried to reinstall the other drivers, chipset drivers for example. But unfortunately it did not help. I also tried to disable the Intel High Definition Audio, but also without success.

  What else can I try? I don't want to reinstall Windows. There must be a solution without this. Any ideas? Here's a screenshot of my device manager, perhaps it helps:

  

  If you need more information, please let me know.

  Best regards

  Ty

  I just tried this driver and I still have sound after 6 resets.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

• I have a new MacBook Pro 13 "." When you click on almost ANYTHING, I get a drop-down menu, rather than the simple task. This includes a link to closing a window, writing a message of openness. Whatever it is. I've updated to 10.11.2.

  I have a new MacBook Pro 13 "." When you click on almost ANYTHING, I get a drop-down menu, rather than the simple task. This includes a link to closing a window, writing a message of openness. Nothing, including the drafting of this issue. A screenshot is included. I've updated to 10.11.2.

  Thank you!

  Bill Koechling

  

  Is it possible that you accidentally tap the touchpad with 2 fingers?

  Try to go to the preferences system-> Trackpad-> point & click and disable the "Secondary click" item Or change one option other than water from the tap 2 fingers.

• Where can I download the 971644 rather than do it from Windows update?

  Where can I download the 971644 rather than do it from Windows update?

  Only WU apparently-

  http://support.Microsoft.com/kb/971644

  Description of the update for Windows Server 2008 platform and Platform for Windows Vista update

  TaurArian [MVP] 2005-2010 - Update Services

• I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again?

  I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again? I bought an old compaq desktop computer, and I want to update.

  It's probably too late because you have unsealed the package, but as you have relatively minor glitch of the material do not have a DVD player, did you use the (free) Windows 7 Upgrade Advisor to determine whether your computer hardware is capable of running Windows 7?

• Minimized windows disappear rather than appear in the taskbar

  If there is a solution in the FAQ, etc., I can't find it. I have just upgraded to Windows 7 Pro. When I reduce the open windows, they disappear rather than appear as icons in the taskbar. The only way to see them is to push Windows/tab. It wasn't a problem with the Home Premium edition.

  Click on an empty area of the taskbar and select Properties. Against the will of task bar buttons, make sure that "never combine" is selected.

  Thanks, but I already checked that.
  I also ran the Aero Troubleshooting Services where she was related to the.

  Update: I've started in Mode safe and cut-to-the task bar has worked perfectly. On a hunch, I deleted Thumbnail Sizer from AVE, which was a remnant of the old system of Vista and rebooted. That solved the problem.

• Windows 8 cursor jumps in the existing text and continues to type here rather than the finish line that I am on, anyone else spotted the same thing?

  Just upgraded to Windows 7 to 8, using MS Office Word 2010, worked well on Win 7, but now type text and the cursor suddenly jumps into the existing text and continues typing, rather than the finish line that I'm on.  Thought, I was accidentally touched for touch pad or other keys, so now consciously look for this but can find nothing on my part.  Have experienced it before with a processor OS Linux and Open Source, when the OS has been updated.  Think there may be a loophole to WIN 8.  It also happens when keying in the screens like this, that has happened twice while here. Someone else spotted the same thing?  Or is it just me?

  Also, anyone know how to disable "Open Tap" on the Mouse touchpad of the notebook, its annoying, I could disable in WINDOWS 7 but cannot know how Win8.

  Thank you very much for your help, the setting was not really there, but you gave me the name of the device, so I was able to download the right driver from

  http://www.Synaptics.com/resources/drivers

  above mentioned just in case anyone has the same problem. The site recommend to go with the hardware vendor's website, but ASUS has wrong driver, one of the above works fine.

  Its such a relief to be able to settle this problem - THANK you

  Lets see if it sorts the problem MS Office too.