Ratio of default camera
Is it possible to change the ratio 16:9 without resorting to the 3rd party App camera is one of the main things the camera in the House does not. Is there a hidden somewhere parameter to use. As in acdsee or camera +.
Not because the iPhone 6s am a 12MP sensor then default Ratio is 4:3
In 3rd Party applications so you can change the Ratio but don't forget, you get 16:9 Ratio in 8MP photo resolution gets too low.
Tags: iPhone
Similar Questions
-
Default camera is not applied to import
Since the update to LR CC 2015.3 my default camera raw settings are are not applied when importing or recall if I exit and restart LR. If I create a new, it works up until I stopped. If I restart and try to import new photos of the exact same camera (Sony A7 RII), it applies to standard flat profile with a standard configuration of Adobe. Any help would be appreciated. Appears as a Pushpin, other know this as well? A preferences file that has been tampered with? I haven't checked your auto and in prefs didn't he camera specific to specific serial No. or ISO.
This is a bug specific to Sony cameras, see this report on the official Adobe feedback site: 6.3 Lightroom / Camera Raw 9.3: Broken 'Develop default settings'
-
Hi when double click on an image in bridge it opens adobe illustrator and not camera raw how do I default camera raw?
Please see:
Creative Suite * display and management of files in Adobe Bridge
and change Camera Raw to Psalm files association
Kind regards
Ashutosh
-
Is it possible to adjust your camera profile lens to show only what you have rather than having to pick up the lens you have every time?
Hi AWDeagleTSi,
You can set your default lens profile by following the steps below:
- Choose your profile for images
- Click the drop-down next to configuration menu and choose 'save new lens profile Defaults.
- Go to any other image and choose 'default' in the menu configuration menu and it should apply the profile of the desired objective.
Kind regards
Claes
-
Develop preset continues to choose the calibration of default camera profile
Hi, for some reason, whenever I chaque fois que je choisis choose a develop preset that does not have a specified camera calibration profile (it should be and used to be "Caméra Standard"). He would choose the first profile in the list instead of "Caméra Standard".
«I tried to put this by accessing the default develop menu "settings" and clicked on the 'Restore Adobe Default Settings' and "Update to current settings" with selected "Camera Standard".» Which no correction of the problem.
Does anyone have an idea how to solve this problem?
Thank you very much in advance.
-Daniel
dingster1 wrote:
Hi, for some reason, whenever I chaque fois que je choisis choose a develop preset that does not have a specified camera calibration profile (it should be and used to be "Caméra Standard"). He would choose the first profile in the list instead of "Caméra Standard".
You try to use the Standard camera or Adobe Standard profile? The issue of Nikon D810 in LR 6/CC is with the Adobe Standard profile... it is missing after the day.1
You should be able to use the Standard profile camera as your default develop settings or use it in a "Preset" without any problem. Only images or presets that use the Adobe Standard profile are affected and show the profile flat camera after the LR 6/CC.1 update.
-
Why can't save default camera raw?
I'm currently impossible to reset my camera raw default in CS5 (Camera raw 6.5). When I click on "Save Camera Raw Defaults", the changes do not appear when I open a new image using Adobe Bridge. I seem to be stuck with the changes that I made some time ago. What could happen?
Camera Raw uses the same settings you last used to open a file. It's just the way it works. The default values that you define will be used on any image that you have not opened before.
To restore an image that is open before the new default values, you must do one of the following:
1. Choose Camera default Raw in the menu:
2. depending on how you have configured Camera Raw to remember your parameters passed, either delete the XMP sidecar files or go to Edition - Preferences - Camera Raw... and empty your Camera Raw cache if you want to discard all the previous and future parameters opens using your new default values.
-Christmas
-
When in / changing the batteries the default camera to its default value.
Hi all
It seems that every time I have swap batteries in my 5 d Mark III, I'm always having to reset the date, time, etc...!
Yes, besides being a bit boring... what happens if I am in the middle of the photo shoot where I can't stop and reprogram retroactively to the correct date.
Question
Is it possible to save the date information in my camera so that when I swap out batteries I'm not always reset the date and time and the time zone?
Yes, the camera is off when I do that.
Thanks in advance,
Bob
http://protogtech.com/cameras/Canon-5d-Mark-III-clock-battery-location-removal/
-
Adobe Lightroom Android App to default camera
I have this 6 Android possible?
I think that the LR Mobile photo app adds the built in camera on the device, which would always work when not connected to the Mobile from LR.
http://99jon.blogspot.co.UK/2016/03/Lightroom-Mobile-for-Android-update.html
-
I take a lot of shots using the end of my Tamron 17-50 mm f2.8 wide angle. Whenever I need to correct the distortion of the lens on a photograph, that I need to say at what lens I used Lightroom, is there a way to tell Lightroom what lens to set as the default value? That could save me a lot of time.
First of all, it seems that profile correction is not properly pick up your goal via EXIF data. Select a photo, activate correct profile and then select the correct lens.
Now, I don't remember the exact steps to do this, but after that you have the correct target appears, you do a right click on the word "default" (something like that) and you'll get an option to save the chosen goal. Next time you check the box on a photo that has used this lens, it detects your goal well.
As for automatically applying the correction of the profile appropriate for a bunch of photos that you import, as far as I know, you must create a script has do and run it after the import. It's late and I'm tired, so I forget the terminology for the "script". He's probably presets.
-
Configuration of IP addresses by default of the CIVS-IPC-6400 cams from a remote location via MS
Hi guys,.
I know here is not a community of shell/bash programming, but I need emergency assistance. On my client's site, there is a place that don't have any DHCP server or any windows machine to change the default IPS of cams but ony race Media Server and back up with the IP address of the interfaces. I have a shell script that wget command allows to connect the camera to the default IP address and removes the sessionID and use it to replace the correct IP address. My problem is that when I tested the script cam turn on HTTP it works prefect. But when I run on the cams of default config it is unable to obtain the ID of session of cameras. Any ideas?
Here is my script changeCamIP - HTTPs.sh file;
#=================================
wget d - U "Mozilla/5.0 (compatible; MSIE 10.0; Windows NT 6.1; WOW64; (Trident/6.0) ' - non-cocher-certificate - response from the Server - post-data = "version = 1.0 & action = login & userName = admin & password = admin»--non-cocher-certificat--restreindre-noms files = nocontrol o $1 https://$1/login.cs
pidof wget > wait
sessionID = $(cat $1 | grep \"sessionID\" | cut-d '='-f4 | cut-d ""'-f2)
echo $sessionID
wget - U "Mozilla/5.0 (compatible; MSIE 10.0; Windows NT 6.1; WOW64; Trident/6.0)" --no-check-certificate --restrict-file-names=nocontrol -O ret https://$1/ipaddressing.cs?version=1.0\&sessionID=$sessionID\&action=set\&ipVersion=1\&addressingType=2\&ipAddress=$2\&subnetMask=255.255.255.0\&defaultGatewayIPAddress=$3\&primaryDNSIPAddress=\&secondaryDNSIPAddress=
RM-fr $1
RM - en ret
echo 'OK '.#=================================
I am running the script with these settings: 192.168.0.100 New_IP New_GW #./changeCamIP-HTTPs.sh
Only option 3 is sufficient.
When I changed the https to http protocol, it works perfectly. But the default cams only supports HTTP...
Thanks for any help and ideas.
I'm ready to take a crack at it with you, if it's still a problem.
Chances are, by default / cameras NIB (New In Box) are present with an initialization screen when you set up an account initially? I don't have the cycles to figure out this part with you, but that's what comes to mind.
So what else * you actually on the site? Your own workstation? Media Server only?
Why not just turn a temporary DHCP daemon on the media server with a small stretch to grab your cameras temporarily so that you can get under management within VSOM and move them to static in this way? (Don't forget to decommision the DHCP daemon after it ;-)
Good luck!
PS - I have the feeling that I'm * realllllly * missing something here after thinking that he for a while... You say that you have not all Windows boxes on the site? How the customer would actually use... VSM in this case?
-
Script to: specify default values for the serial number of the camera? How?
I was trying to find a way to activate script preferences to activate the color profile by id camera series.
It's just to enable this option on bridge Camera Raw preferences:
Edit > Camera Raw Preferences > make default camera serial number-specific values (on YOU)
I have a calibration of multi-studio contralized are updated color profiles when any computer starts bridge or photoshop, and all is done by script automatically.
It's just this line that is missing and I can't activate it by script.
So simple, and I could not find.
This is the same folder as the profile color xmp sidecars.
File (Folder.userData + "/ Adobe/CameraRaw/Defaults/Preferences.xmp");
DefaultsSpecificToSerial = 'True '.
Solved!
-
Hi, I tried things in camera raw in extended cs5.5 and I can't work on how to reset the default settings. Everytime I open an image in raw it's clearly wrong. Can someone please help?
Welcome to the forum!
According to an excerpt of the book of Camera Raw controlspractice, control 'default' (circled in red in the image below) "provides a simple way to return to the default Camera Raw settings in the base Panel based on your current default settings (which can be changed)."
And here's a great introductory video on the version of Camera Raw that shipped with Photoshop CS5:
-
By default the camera and the model to publish
Hey,.
I am in a room with the console of the room.
Then I select "Default caméra" in the 'Flow' tab and click 'configure '.
Now, I choose "Viewer (10) ' as 'Model to publish' and save with 'OK '.When I click on "Set up" once again the model 'release' is set to ' Owner (100).
Can you tell me whats wrong maybe?
What I want to achieve is that the visitors with 10 role can send their webcam.
Thank you.
Hello
Thank you for this comment. There was a bug in the user interface of our side to show Owner (100) while it is Viewer (10) and vice versa as you pop - the audio Configuration dialog box / camera.
This is why you will see if you switch from an Owner (100) Publisher (50) or Viewer (10) Publisher (50), the user interface works very well.
The good news is, it was only a bug of display of the user interface, for example if you select access or publish the model to a value, let's say owner, the role will be in fact to the owner. Only when you open the new dialog box display will be wrong.
I fixed it and there is an SDK to update very soon and will be attached to that. Until then, you can ignore the question of the user interface.
Thank you for this comment.
Concerning
Hironmay Basu
-
I was one native app other than entertainment that uses the camera. A requirement of my application is the mode of the camera on manual focus.
My version of Z10 10.1.0.4181 returns true for camera_has_feature (CAMERA_FEATURE_MANUALFOCUS).
Very well, but when I try camera_set_focus_mode (_camera, CAMERA_FOCUSMODE_MANUAL) it returns CAMERA_EOPNOTSUPP.
Manual focus is supported? I was hoping to use the manual_step functions.
In addition, there are 3 resolutions supported according to camera_get_photo_output_resolutions photo.
2448 x 3264 (8 megapixels)
1836 x 3264 (6 Megapixels and the dimensions of the photo of the pictures taken by the Z10 default camera app).
2448 x 2448
The 6 megapixel size camera works fine, but when I tried starting 2448 x 3264 the viewfinder will fail with CAMERA_EINVAL. It is very worrying that if the Z10 only supports 8-megapixel photos, why is he announced to to do? Am I missing something about the stabilization or some settings, I'm not aware of?
Hi, I was using CAMERA_UNIT_REAR.
I discovered what was wrong in both cases:
1. in an attempt to set the manual focus mode and is CAMERA_EOPNOTSUPP. You must start the front camera, affecting first the mode of development. Then it works. I'm not sure if it's in the documentation.
2 duh, the viewfinder aspect ratio must be identical to the picture you want to take. My mistake.
-
IPhone 6s - microphone does not work on all applications except camera and calls
Hey, I don't know exactly know what happened with my phone. Suddenly, my microphone work on LINE, Whatsapp and almost all other applications that use mic. Except, camera and when someone call me on my number.
But it does not work on whatsapp and LINE calls. And it also does not work when I snapchat. Only works on the default camera Apps and call through my number.
I tried:
-restart my phone
-hard reset and blink? Reset with the power and the "home" button.
-read the micro support page. Still no solution.
TL; Dr:
my microphone does not work on every apps on my phone except calls through number and approx. of default camera it gives you just that silence when I play it on voice notes. But it works when I record yourself using videos on the default camera app.
Hello Bllacke,
Thank you for using communities of Apple Support.
I see from your post, some applications have a problem to access your Microphone. I know how it is important to ensure that your applications have access to the Microphone and can use this feature. I have a few things I want to try.
First, tap Settings on your iPhone and then scroll to the last section that lists your apps. Select the applications that use the microphone and make sure that the Microphone is activated (green).
Then, follow the steps in the article below to close these applications:
Force a nearby application on your iPhone, iPad or iPod touch
Then, test the microphone in these applications again and see if it works.
Best regards.
Maybe you are looking for
-
Windows 7 gel - Satellite Pro A300D
Hello I have recently upgraded to windows 7 on my satellite pro A300D. Everything works well except one problem. When I restart my computer after running the empty battery, the system retrieves and then shortly after that recovery of the screen freez
-
Microsoft Safety Scanner - error: drwt 32. exe
I can't update Windows and same Fixit gives error during download of Powershell, so I tried to scan Microsoft security, with 'quick scan' its ok but when I try with "completely scan", after 5-10 min., system scan stops because there was an error in d
-
C0000218 failure of a file record
Here is the message I keep getting. I'm trying to fix my dad's computer and have had no luck. I tried to use the restore disk, and the computer does not start. I tried using F8 and it will not draw the menu, so I can restore last known good configura
-
How to enable Windows Defender on a Vista laptop
Hello I have a Vista laptop and today found out that Windows Defender is disabled. When I tried to put it on a window appears telling me an error: OX800106ba caused windows defender to stop work and that I should turn the computer off, then on. I d
-
When you try to make the system images, I found that the system reserved (100 MB) partition can be a problem if it has less than 50 MB of free space. In my case it was after execution of FSUTIL USN DELETEJOURNAL/d/n and 34 MB free disk space is only