RAW error record.

Similar Questions

• 5 d mark II raw (CR2) file is different from the 5 d CR2 file? Adobe Camera Raw error on mk II No 5 d

  I use the plugin Photoshop Camera Raw (Adobe) to preprocess the colors, and then complete the prepare image in Photoshop.  Never a problem with opening files CR2, usually from my own camera 5 d.  But a customer sent a few files CR2 which opens not (error says this is bad kind of document).  So far no explanation nor patches from users of Photoshop... thought I would ask experts to Canon.  Why file CR2 from the 5 d mk II fail but 5 d CR2 files all open ok?

  Still using Photoshop CS2 and the plugin Camera Raw is 3.7 v.  I really want to continue this workflow (works for me), prefer not to experiment with dpp or other opportunities.  Not ready to move yet to Photoshop CS6.

  No, CR2 (and all files camera RAW manufacturer) are modified somewhat for pretty much every version of the camera.  Similarly, manufacturers of software like adobe are always updated their software for the new models.  Your version of Adobe Camera Raw is extremely old, so that it can not read the 5 d 2 files.  And Adobe limited backward compatibility, so I don't know if you can load a sufficiently recent version to recognize the 5 d 2 files.  If you can't, then you're only choice would be to use the Adobe DNG Converter, convert batch files to DNG, the 5 d 2 then read those.

• RAW image recording / lens aberration correction

  My question concerns how important image recording quality when considering to use the lens correction data. Although one of the EOS Utility Manual mentions how Digital Photo Professional can solve peripheral aberrations, it refers only to color corrections only for images like the FIRST recorded. What, exactly, are the choice of good recording quality and evil, regarding their correlation with correction data that the software uses to correct aberrations?

  Peripheral illumination correction simply corrects optical vignetting is inherent in many lenses. In other words, it corrects the neighbors of illumination in the whole image, where without it the corners and the edges of the picture may be a little darker than the center of the image. It is more common in the wide angle lenses.

  Correction of distortion and chromatic aberrations are only applied in camera when you process RAW files in JPEG format. So, in other words, if you want them to do behind closed doors you must have the camera set to produce JPEG or RAW + JPEG for these fixes to apply.

  The same corrections can be applied in post-processing of Canon Digital Photo Pro RAW conversion software. If you have corrections allowed behind closed doors, then allow the DPP software treat 'in the know', he will apply them same as if it was behind closed. Alternatively, you can manually cancel the corrections in post processing.

  Many other post processing RAW conversion software can do similar. For example, Adobe Lightroom (Adobe Camera Raw) is a correction of the lens profiles built in which can be applied automatically, as well as manual controls for three types of correction. Software DXO lens correction software still seems more advanced.

  If done in post-processing, the result of RAW conversion can be a file type other than 8-bit JPEG, for example 16-bit TIF or PSD, etc.. If the treatment is done behind closed doors, you can get than JPEG files.

  I hope this makes sense.

  ***********

  Alan Myers
  San Jose, California, USA.
  «Market softly and carry a great lens.»
  MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
  FLICKR & EXPOSUREMANAGER

• Crypt32 error recorded during gel system

  Windows XP home SP3 kept updated and regularly clean the operating system (with iolo sys mech) (Norton IS 2012 is updated and I regularly scan)

  Event ID: 8

  "Failed to retrieve auto update of third-party root sequence number in the list: with error: this network connection does not exist.

  This error continues on a regular basis, around 5 minutes outside. The main symptom seems to be a short freeze function that is mouse frozen and for example, watching a movie, the movie freezes.

  The error message and the above event ID is saved in the course of these gels although I can't seem to understand why a network connection problem has this effect with regard to the freezing.

  The movie player used when the gel is VLC, but these gels themselves at all times and not just during movies. I maybe only 3 open windows (a folder and 2 apps) when a freeze comes, they may last a minute or two and the system returns to full function after a frost.

  I will continue to try to understand what 32 crypt and if it is related to him freezes. I find it curious because I noticed only the gel in the last days and the frozen mouse was the first symptom notice, event viewer recorded the crypt 32 error every time. My short really good OS and I have problems on rare occasions and in general they have been easily corrected. I plan to replace the crypt 32. dll with a copy of a backup, I'm not sure of the effect this will however, if it does not solve the problem, it can make things worse.

  Any advice would be much appreciated

  Try to download and install the update for root certificates manually.  Go to the following site:

  "Members of the certificate program root Windows.
    <>http://support.Microsoft.com/kb/931125 >

  Jump down to the paragraph "Root Update Package (designed for Windows XP only)" and download the updated certificates root from the indicated link.  After downloading the file, double-click it to install it.  With certificates installed up-to-date, if all goes well, he don't keep trying to download all the minutes.

  HTH,
  JW

• Images Raw camera recording under a shade pink

  Hello

  I'm having trouble with the edition of PS CS5 Camera Raw. I use images from a Canon 5 d Mark II & III, and starting this week, my images saved as the first below, with a pinkish tinge. I'll adjust the contrast, exposure, color balance and brightness of the large lots and save, once they are rescued, they look like to the below, and I have to adjust each setting on every image again. What is a user error? I used the same program, the same way for 3 + years now, and this is the first time that I had a problem. Now, when I save the pictures on my desk, they are fine (2nd image), but how irritating to have to have all of these images saved on your desktop and having to move again. Or do I need to ditch Camera Raw and start using a different program/process? Help, please!

  

  

  This looks like a simple matter of white balance. You must have some preset (accidentally) applied.

  If it isn't, you need to explain your procedure much more in detail.

• Unknown error recorder - solved, but not a great solution

  A customer brought me a new laptop has an old mistake: when capturing from a DV camera, body quickly get an "unknown Recorder error" and does not capture. The problem does not manifest during capture in Windows Movie Maker and does happen with 3 cameras from different manufacturers. I already downloaded and installed the 5.0.2 update and am logged on as administrator.

  My solution was to go into the Task Manager and set the process affinity of agency use only the CPU 0. Then capture works perfectly. I know it was a problem with older versions of the elements and the body and equipped with AMD processors. But this laptop (desktop replacement) has a video of 1.5 GB Intel i7 with 8 GB of memory, processor and about 500 GB of free space on the disk at 7200 RPM / min.

  Why this bug has not been overwritten? Yes I can enter on the bug report page, but it has long been known. Has anyone found a better solution than that? (I told the customer it would be better to go without tape, but still...)

  Go into the hardware Manager Win7 and change than LEGACY Firewire driver in the name

• unknown error recorder at 03:51

  I get the "unknown Recorder error" during capture video DV, Mini DV cassettes, using premiere Pro CS 4 and CS three. It occurs exactly three minutes and 51 seconds of captured video.

  It always occurs on three different computers, all of which are Intel multiprocessor machines with 7200 RPM HD or SSD. Both machines are running Windows 7 and a machine running XP. This happens with two different mini DV recorder, JVC HR - 3U DVS and Sony HVR - M15 AU. I tried several tapes and this error occurs regularly.

  I am logged on as administrator, I tried to disable startup items and I changed the settings of affinity for premiere Pro. I can capture video using Windows Live Movie Maker without difficulty.

  Thanks for any help it can get.

  Did you use the clean Script CS4 propgram 2 or 3 times after uninstalling? If you did there's a good chance the installation package is corrupted.

• USB Raw error:-1073807298 - I don't think that there is an easy solution...

  Hello people,

  I am currently working on the implementation of a temperature regulator using a distributed seller USB driver.  I spent the last three weeks, this troubleshooting error:

  I suffered from seemingly random and intermittent communication problems in communications instrument USB as well. In a particular case, it is with a USB device of NOR. The problem actually proved to be the USB cable to the device. Someone had replaced the original OR with a less robust cable cable. Cable OR original had a Pearl of ferrite at one end to help the noise to remove. The replacement cable is not. Once I changed to cable OR origin, intermittent problems went away. I don't know if this is your problem, but a good cable USB makes all the difference in this application.

  Good luck.

• Error recording attached directory cannot be created

  I'm trying to save the attachments in the emails of Microsoft Ourlook 2007 on a USB storage drive. I managed to save one, then I get an error "Failed to create directory" trying to save others. I get this error even when you try to send copies of the photos to "My pictures" on the storage disk. I was able to copy some but not others.

  Check if you can create folders on the USB and the move the photos to the folder.

• "Copying prohibited" error recorded and live TV on Media Center Win7

  Hello

   

  How long it will take for Microsoft to respond properly to this problem which have thousands and thousands of people.  There are forms and discussions all over the Internet with exactly the same problem.  After I installed Windows 7 and have absolutely no problems until a few weeks ago.  You can't watch the TV show whether direct or reading as a record course.  My problem started just after the updates have been made on 14 January, but I think it's just a coincidence.  It seems also occur when you watch the show on a HD channel.  At the same time if the program is available on a post not HD see you and be able to save it.  I have done everything recommended by the folks at Microsoft for seven different forms and the problem persists.  It's a software program problem or a problem of cable company that Microsoft has been unable or unwilling to respond to.  Just acknowledge the problem and stop putting your customers through the time wasting recommendations that will not fix the problem.  Throughout the Internet, it seems that each host Microsoft has a different answer and a recommendation for the same problem.  When things have been OK with everyone and suddenly the problem began, it is clear that he has nothing to do with the hardware, what a person uses or the supplier who provides the programming.  There is no need to ask as many questions that a person gives up trying to get an answer, when it becomes blatantly obvious, that this is not a personal matter.  Thank you and please send all your Media Center users troubled and frustrated at a place where we can finally get the answer correct and consistent.

   

  Thank you

   

  DEPARTMENT

  Hello MediaCntr_Bugd and Lil Bit,

  Thank you for visiting the Microsoft answers Site.

  The question you have posted is related to Windows Media Center and would be better suited to Windows Media Center community.  For better support, you can view the thread below to the Microsoft Website, www.thegreenbutton.com , the community of Windows Media Center and post if the problem occurs with all channels or only chains.  Alternatively, you can pass on your information system.

  http://thegreenbutton.com/forums/p/86890/437965.aspx#437965

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Export error records 'diagnosis package cannot be recovered from VMware vCenter Converter Standalone. "Error: could not generate file diagnosis of VMware vCenter Converter Standalone server.

  Hey, gentlemen!

  Trying to export logs from VMware vCenter Converter Standalone v 5.5.2 and this error occurs.

  "The package of diagnosis cannot be recovered from VMware vCenter Converter Standalone. "Error: could not generate file diagnosis of VMware vCenter Converter Standalone server.

  Can he save data to the file journal, but only coverter_gui newspapers, nothing else.

  Google search returns no results at all.

  What could be?

  OK, it is resolved after you restart the converter Services.

• UTL_FILE error record

  Hi gurus

  I use this Procedure to generate the csv file of linux DB server and save it to the windows file system.

  Select * from dba_directories;

  SYS

  CREDIT_REPORTS

  /cifs/mnt/credit_report

  I checked that Samba is running.

  [root@abcoracle ~] # ps - ef | grep smbd

  32295 root 32096 0 22:01 pts/2 00:00:00 grep smbd

  My proc

  create or replace

  Run_query P_sql() PROCEDURE in VARCHAR2

  ,, p_dir IN VARCHAR2

  ,, p_header_file IN VARCHAR2

  ,, p_data_file IN VARCHAR2 := NULL) IS

  v_finaltxt(VARCHAR2) 4000);

  v_v_val(VARCHAR2) 4000);

  v_n_val NUMBER;

  v_d_val DATE;

  v_ret NUMBER;

  c NUMBER;

  d NUMBER;

  col_cnt INTEGER.

  f BOOLEAN;

  rec_tab DBMS_SQL. DESC_TAB;

  col_num NUMBER;

  UTL_FILE. v_fh TYPE_DE_FICHIER;

  BOOLEAN := v_samefile (NVL ()p_data_file p_header_file) = p_header_file);

  BEGIN

  c := DBMS_SQL. OPEN_CURSOR;

  DBMS_SQL. ANALYSIS() c, p_sql,. DBMS_SQL NATIVE);

  d := DBMS_SQL. RUN() c);

  DBMS_SQL. DESCRIBE_COLUMNS() c, col_cnt, rec_tab);

  FOR j 1. . col_cnt

  LOOP

  CASE rec_tab() j). col_type

  WHEN 1 THEN DBMS_SQL. DEFINE_COLUMN() c v_v_val j , 2000);

  WHEN 2 THEN DBMS_SQL. DEFINE_COLUMN() c v_n_val j );

  WHEN 12 THEN DBMS_SQL. DEFINE_COLUMN() c v_d_val j );

  ON THE OTHER

  DBMS_SQL. DEFINE_COLUMN() c v_v_val j , 2000);

  END CASE;

  END LOOP;

  -This section displays the header

  v_fh: = UTL_FILE. FOPEN (Upper (p_dir), p_header_file, 'w', 32767);

  FOR j 1. . col_cnt

  LOOP

  v_finaltxt := ltrim()v_finaltxt | «, » || down() rec_tab() j). column-name), ',');

  END LOOP;

  -DBMS_OUTPUT. Put_line ()v_finaltxt);

  UTL_FILE. Put_line ()v_fh, v_finaltxt);

  IF this is v_samefile THEN

  UTL_FILE. FCLOSE ()v_fh);

  END IF;

  --

  -This part generates the DATA

  IF this is v_samefile THEN

  v_fh: = UTL_FILE. FOPEN (Upper (p_dir), p_data_file, 'w', 32767);

  END IF;

  LOOP

  v_ret :=. DBMS_SQL C FETCH_ROWS();

  WHEN OUTPUT v_ret = 0;

  v_finaltxt := NULL;

  FOR j 1. . col_cnt

  LOOP

  CASE rec_tab() j). col_type

  WHEN 1 THEN DBMS_SQL. COLUMN_VALUE() c v_v_val j );

  v_finaltxt := ltrim("v_finaltxt |', ' ' | v_v_val |'" ',','");

  WHEN 2 THEN DBMS_SQL. COLUMN_VALUE() c v_n_val j );

  v_finaltxt := ltrim()v_finaltxt | «, » || v_n_val, ",");

  WHEN 12 THEN DBMS_SQL. COLUMN_VALUE() c v_d_val j );

  v_finaltxt: = ltrim (v_finaltxt |) ',' || TO_CHAR (v_d_val, ' DD/MM/YYYY HH24:MI:SS'), ',');

  ON THE OTHER

  v_finaltxt := ltrim("v_finaltxt |', ' ' | v_v_val |'" ',','");

  END CASE;

  END LOOP;

  -DBMS_OUTPUT. Put_line ()v_finaltxt);

  UTL_FILE. Put_line ()v_fh, v_finaltxt);

  END LOOP;

  UTL_FILE. FCLOSE ()v_fh);

  DBMS_SQL. C CLOSE_CURSOR();

  END;

  Proc call

  Exec run_query() ' SELECT d. DEBTORNO AS 'DebtorNo', d. Name NAME AS, d. MOTORCARRNO AS "MC # ', trunc()d. CREDEXPIREDATE) AS 'Expiring Credit Date', d. CREDEXPIREMOS AS 'Credit expires in many months' OF DEBTORS d WHERE d. CREDEXPIREMOS (3, 6, 9, 12) AND TRUNC()d. CREDEXPIREDATE) > = SysDate TRUNC()-1 AND d. NOBUYDESC is null AND (d. ) NOBUYDISPUTEKEY has the value NULL OR d. (NOBUYDISPUTEKEY = 0) order by 2 ',' Credit_reports ',' credit_exp.csv')

  Errors

  Error at startup on line 2 of the command:

  Error report:

  ORA-29283: invalid file operation

  ORA-06512: at «SYS. » UTL_FILE", line 536

  ORA-29283: invalid file operation

  ORA-06512: at "ABCBI. . RUN_QUERY', line 36

  ORA-06512: at line 1

  29283 00000 - "invalid file operation.

  * Cause: An attempt was made to read from a file or a directory which is

  not exist, or the file or directory access was denied by the

  operating system.

  * Action: Check access privileges to the file and directory on the file system

  and if reading, check that the file exists.

  Check first agree on this directory CREDIT_REPORTS

  Grant read, write on CREDIT_REPORTS for ;

  Second, try to create any file in ' / mnt/cifs/credit_report "by oracle at the level of the OS user and verify that you have access to do this.

  ----

  Ramin Hashimzade

• Replace library error records

  When I try to replace a folder in my library with a new version of this file, the compiler will show these WARNING:

  * Warning * the link identifier "com.aconma.controls.TextMenu" was already assigned to the symbol "AconmaComponents/NumericStepper/AconmaComponents/TextMenu/textMenu" and impossible to assign to the symbol "AconmaComponents, TextMenu, textMenu", because binding identifiers must be unique.

  * Warning * the link identifier "com.aconma.controls.Slider" was already assigned to the symbol "AconmaComponents/NumericStepper/AconmaComponents/bar/cursor" and impossible to assign to the symbol "AconmaComponents/bar/cursor", because binding identifiers must be unique.

  * Warning * the link identifier "com.aconma.controls.NumericStepper" was already assigned to the symbol "AconmaComponents/NumericStepper/AconmaComponents/NumericStepper/NumericStepper" and impossible to assign to the symbol 'AconmaComponents, NumericStepper, NumericStepper', because binding identifiers must be unique.

  * Warning * the link identifier "com.aconma.controls.ComboBoxItem" was already assigned to the symbol "AconmaComponents/NumericStepper/AconmaComponents/ComboBox/ComboBoxItem/ComboBoxItem" and impossible to assign to the symbol "AconmaComponents, ComboBox, ComboBoxItem, ComboBoxItem", because binding identifiers must be unique.

  * Warning * the link identifier "com.aconma.controls.ComboBox" was already assigned to the symbol "AconmaComponents/NumericStepper/AconmaComponents/ComboBox/ComboBox" and impossible to assign to the symbol "AconmaComponents/ComboBox/ComboBox", because binding identifiers must be unique.

  * Warning * the link identifier "com.aconma.controls.TickBox" was already assigned to the symbol "AconmaComponents/NumericStepper/AconmaComponents/box/box/check box" and impossible to assign to the symbol "AconmaComponents/box/box/check box", because binding identifiers must be unique.

  * Warning * the link identifier "com.aconma.controls.CheckBox" was already assigned to the symbol "AconmaComponents/NumericStepper/AconmaComponents/box/CheckBox" and impossible to assign to the symbol "AconmaComponents, box, CheckBox", because binding identifiers must be unique.

  I have to delete the old folder and paste the new, and all this good work

  Someone at - it the same problem?

  Hello

  This is an expected Flash behavior. Warning messages are lifted with editing whenever you have different symbols that connects to the same AS3 class.

  Looking at your warnings it seems like you had at the outset a complete record of components/symbols with an AS3 class that is associated with each of them. Then you have copied the file in some other files, renamed library components/symbols there while retaining the same names of AS3 classes. Then you probably copied back the * update * folder to your original library.

  What is happening here is that the names of all components / different symbol, after it is renamed, the copied file gets merged with the existing, and none of the components or crushed symbols. So now you have two copies of the same item in the library pointing to the same class who would throw eventually put in custody at the time of publication.

  To resolve this problem, you will need to either remove the names of all old items existing AS3 classes in the library. or simply delete the existing file and then paste a new.

  I hope this helps.

  Thank you!

  Mabrouk

• CC of InDesign cannot open the file - error: recorded in a later version (CS7.0)

  My colleague and I have implemented CC accounts last month (updated for CS5), but now when I'm trying to open a file, she led recently I get this error: "cannot open 'file name.indd' because he was saved with a newer version of Adobe InDesign (CS7.0). You must use this version or later to open the file. To then allow him to open up in this version, click Save as InDesign CS4 or later version, or exporting to IDML. »

  Both are PCs. We use the same software, it seems so I'm confused as to the version of CS 7, she saves in and does not allow me to open the file.

  Any suggestions?

  Your cowoker has installed InDesign CC and you always run CS6. You

  can install CC creative.adobe.com

• List: error record must be entered and deleted everything first

  Hi all
  I created a form in this form, I used the data block.
  in this data block, I chose option multiple records.
  It shows several text fields, its ok
  and I created a new block of data to a button
  This button, I wrote a code pl/sql trigger when click
  Here is code
  

  declare
       cursor test is 
            select location_id,street_address from locations where country_id ='US'; 
    begin
        for i in test loop
              :LOCATIONS.LOCATION_ID:=i.location_id;
           :LOCATIONS.STREET_ADDRESS:=i.street_address;
             next_record;
        end loop;
            end;

  This code works very well with the trigger a time new form instance
  
  but when-click of the mouse, it gives an erros

  Record must be seized and remove the first

  how to solve?

  Set your where condition for the datablock in the db--> Property Palette block-> Where Clause

  or set programmatically using Set_Block_Property (, DEFAULT_WHERE,) in your motion trigger.