RAW image workflow problem

Similar Questions

• I have a problem for editing raw images in CS6 Adobe Bridge camera

  When I right click on a raw image in Bridge CS6 and choose "Open in raw" I get a slightly different edition format compared to when I double click on the same raw image.

  Right click gives me the following settings options: temperature, tint, exposure, contrast, highlights, shadows, white, black, clarity, Vibrance and Saturation

  Double click gives me a message "convert to the 2010 process.  When I click on that, I have the following setting options: temperature, tint, exposure, recovery, fill, black light, brightness, contrast, clarity, Vibrance, Saturation.

  I prefer the adjustment tools provided with the right click option.  : However, after I do the image settings using this option and I click on "Open image", the image disappears and open Photoshop, but there is no picture.  I'm fairly certain that I used this option right-click before and after adjustment of the image and clicking on 'Open image' image appeared in Photoshop where I could make a further editing and/or save in JPEG.  But no more.  What is the problem?  I'm doing something wrong?

  Thank you kindly in advance for your comments of support.

  Baker

  You should not see this difference by double-clicking just by right clicking. What you mentioned by right clicking is the old Camera Raw and is no longer used. The new way is actually much better, even if it takes a bit to use to. I didn't like it at first, but now I find much better, there are a few problems with fixes that work much better with the new method. Normally you won't get the old method, if a file has been fixed with it. You can reset the image on the failure to have the new method to take effect.

• Hello everyone, I'm having a problem at the opening of the RAW images in Photoshop...

  Hello everyone. I was just trying to work on some on my Photoshop & from their opening RAW images, I get the message: If you try to open a file from a digital camera raw, make sure that you have the latest camera raw update installed via help > updates... (but when I go to help, it does not give me these options). I use a canon 6 d and it shows that it should support the minimum CR sheet in version 7.3. Please let me know if anyone of you knows how to solve this problem, thanks

  Hi Helen,

  Go to the list of system information that Chris mentioned and under required plugins that camera raw should be listed. You can see I'm version 9.5, but as you use CS6 you can use the version the most recent is 9.1. Your camera requires a minimum of version 7.3 so if you get the 9.1 version then it should work without a doubt.

  I don't know if you have a Mac or Windows machine then here are the download links for both. Do not be tempted to try v9.5 as her for CC only. As Chris pointed out you lack a lot of updates and you can find the camera raw 9.1 will not work until they are installed, but there is not much to lose by installing v9.1 and just see if it works.

  Hope that helps

  Terri

  Camera Raw installation of Adobe Photoshop CC and CS6 program

  Required plugins:

  3D Studio 16.1.2 (2015.1.2 x 001 003 x)
  Accented edges 16.1.2
  Adaptive wide-angle 16.1.2
  Angular Strokes 16.1.2
  Average 16.1.2 (2015.1.2 x 001 003 x)
  16.1.2 bas-relief
  16.1.2 BMP
  Camera Raw 9.5
  Camera Raw Filter 9.5
  Chalk & Charcoal 16.1.2
  16.1.2 charcoal
  16.1.2 chrome
  16.1.2 Cineon (2015.1.2 x 001 003 x)
  Clouds 16.1.2 (2015.1.2 x 001 003 x)
  16.1.2 COLLADA (2015.1.2 x 001 003 x)
  Halftone color 16.1.2
  16.1.2 color pencil
  CompuServe GIF 16.1.2
  Conté 16.1.2 pencil
  16.1.2 crack
  Crop and straighten Photos 16.1.2 (2015.1.2 x 001 003 x)
  Crop and straighten Photos 16.1.2 filter
  Hatch: 16.1.2
  Crystallize 16.1.2
  16.1.2 cutting
  16.1.2 Dark strokes
  16.1.2 deinterlacing
  16.1.2 DICOM
  Difference clouds 16.1.2 (2015.1.2 x 001 003 x)
  16.1.2 glow
  Move 16.1.2

• My SP6 will not open RAW images, and when I try to update, it tells me that updates may not be applied. Any suggestions? Please, it is very important, I have this problem as soon as possible.

  I would like to edit RAW images in Photoshop, but I get an error message saying that the file cannot be opened and to make sure that I have the updates. But when I try to update, I get another error message tells me that impossible to apply the updates. I need this problem as soon as possible and I'm going crazy trying to figure it out. Any help out there?

  Try these links:

  Failed installation. Error U44M1P7 | Updates

  Cannot apply the update of the Extension Manager CS6 - error U44M1P7. Mac OS

  If the two do not work, consult this thread Re: error update CS6 Production Premium especially the last answer.

  Hope this will help you.

  Kind regards

  Hervé Khare

• I just bought a DMC-TZ70 Lumix, but thw RAW images are not supported in the elements.  Is there a way to turn the problem?

  I just bought a DMC-TZ70 Lumix, but thw RAW images are not supported in the elements.  Is there a way to turn the problem?

  According to this faq:

  FAQ: Photoshop Elements will work with my camera, or why does not open my raw files?

  Devices supported by Camera Raw

  your camera requires the ACR 9.0 module which is only available in PSE13 after update (menu help/update).

  If you have an older version of elements, the free solution is to use the DNGconverter mentioned in the faq above with the download links.
  This stand-alone software converts all of a folder of your raw files to DNG format raw that older versions of items can read and modify.

• I bought a new camera, Nikon D3300. LR5 will not open RAW images. JPEG only. No problem with the previous D3100 cameras don't od Canon S95

  How can I open RAW images in LR5 of

  my new camera? D3300. no problems with other devices. He tells me, preview not available for this file

  D3300 needs at least 5.4 LR, the latest version is now 5.7. Its a free update.

• 5 d Mark III DIM Raw images CS6 import problems

  I have Photoshop file format error-30504 45::35 when you attempt to import RAW images from 5 d mark III.  Tried an images and image sequences.  Names of files as IMGS1784. CR2

  Have you updated your ACR? MK III support requires 7.1, installing by dΘfaut only comes with 7.0

  Mylenium

• Lightroom 2 error "damaged or not supported raw images" when importing the Nikon D5000

  Lightroom suddenly shows an error message that my camera Nikon raw files may be damaged and cannot be imported into Lightroom. Since yesterday therre was no problem to import raw image files. And I did change the camera settings.

  Also, make sure you use at least 2.4 for the D5000 taken in charge, or better upgrade to the latest version 2.x, which is 2.7. : http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows

• My raw image files must be in one place?

  I'm trying to figure out where my raw image files should be when I download in Lightroom. I've been using Bridge and I usually download them to the desktop, treat bridge, back up a folder with JPEGs raw and treated later move them to our server and remove it from my office. Should I just download the server now that I use Lightroom?

  Well, I do not know which server/network you are using, but many people use servers storage for their photos with no problems at all.

  My recommendation is to ALWAYS put the photo in the folder/drive desired straight out of the camera. (In other words, put the photos on the server). My recommendation is to ALWAYS - do not put the photos in a place and move them later (it's more work!)

  Now, that being said, if your network/server is problematic in some way, then you would be better to put photos on your hard drive, but I think a better solution is to solve the problem of network and put photos directly on the server.

  Tanuj speaks to "read and write access", that shouldn't be a problem because you can set the read and write access on what it takes. I don't know why it's a problem for him, maybe he can explain more (and you only need read access to your photos for editing in Lightroom to work).

• How to make PS (on my Mac) to recognize files (CR2) RAW image as my iPad?

  According to the position... discussion my iPad has no recognize CR2 question but PS CC 2015 or bridge (or LR) files will not see the files as different? Is there a setting that I can change?  Thanks for your help.

  Jay

  Sorry guys, looks like it was a matter of simple app. I woukd insert my SDCard (JPEG files) and my (CR2 files) CF card and didn't know that the default program has been automatically convert the raw image files to JPEG format. So, I just did Lr my opener of default for new files... and corrected image file problem. Thanks for your interest to help him. See you soon.

  Jay

• Change how ACR interprets color space for raw images

  When you browse the raw (CR2) photos with the OS X finder, I love the way color is represented, it corresponds very closely to the camera in preview. However, Bridge/ACR/Lr all interpret the color space of files differently good raw, and I wonder if there is a way to put these programs according how OS X finder restores raw images.

  Color space isn't the issue.  I think what you see with OS X finder is the embedded jpg file has been generated by the camera and saved in the RAW file for viewing, and it should look identical to the jpg of the camera.  The adobes in Camera RAW and Lightroom RAW converter uses the Adobe Standard profile of the camera as the default profile to the camera to generate an RGB from the RAW data image and you can save the image as a jpg, tif, etc. with any colorspace you select (sRGB, ProPhoto RGB, etc.).

  Adobe has generated camera profiles for Canon, Nikon and a few other cameras that are a good match for the profiles used by the camera to generate an RGB image.  You will find them on the camera Calibration tab (as suggested in the post above) and they have names like camera XXXXX, XXXXX is the same name as that used in the camera.  Select one with the same name XXXXX that you selected in the camera and you should get a much better game.  You can also change the default profile to the camera at one of them, as suggested in the post above, and then the RAW image will open the first time using this profile instead of the Adobe Standard profile.  If you always use the same profile in the camera, this will solve your problem.  If you use different profiles of the camera in the camera photo then you will need to manually change in Camera RAW and Lightroom to one corresponding used in the camera because the RAW converter does not read what profile you selected in the camera.

• Impossible to RAW images open in PSE11 (new unit)

  I use PSE11.

  I have no problem opening and editing RAW images from my Canon Rebel T2i

  I am looking to buy a P & S camera (Canon G16) and I tried the store model (brought my memory card) and now that I'm Home I can not open the RAW files in PSE11. I get an error message. When I go to help-> updates, he told me that I have no new updates. Here is the error I get. "" I looked for the "camera Raw help documentation" and I can not find this referenced file.

  

  Hello

  Please check what version of Camera raw you have. This camera is included in Camera raw 8.2 and above.

  Help > about Plugin > see camera raw which version you have.

  You can use the free DNG Converter to view these files to such things as. DNG

  Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.1.1

  Concerning

  ~ Assani

• I have "ve ran all the updates for all of my Adobe software and yet I can not yet open RAW images in photoshop. I have a Nikon d750

  I have problems to open raw images in Photoshop for my Nikon d750. They open in Lightroom, very well. I ran all the updates... do not know what is the problem. Thank you!

  Turns out I just needed to restart my computer. Thank you!

  Sent from my iPhone

• I use Lightroom 5.7, 64-bit with Windows 7 Professional. Without apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now, I've noticed that my directory the files LR

  I use Lightroom 5.7, 64-bit with Windows 7 Professional. Without apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now, I noticed that my repertoire records in library view LR does not show images correctly: If there is a folder with subfolders, the folder contains 0 images, but sub records show the correct number of images. What happened and is there a solution? I tried to uninstall Lightroom and re - install, but the problem persists.

  Here is a screenshot of the error message:

  

  Post edited by: Joseph Costanza, Jr.

  See here for a solution.

• Why red spots appear on my photo when I import a RAW image in the RAW dialog box?

  I just downloaded 13 items.  When I import a RAW image in the RAW dialog box, large red spots appear on the image, before you do anything.  I can't get rid of them, and restart the program has no effect.  I did not have this problem with 11 elements.  Thanks for any input.

  You probably have the highlight clipping warning

  Press O on the keyboard or click the triangle shown in the screenshot below to turn it off.